In CmpChannelServer of CODESYS V3 in multiple versions an uncontrolled ressource consumption allows an unauthorized attacker to block new communication channel connections. Existing connections are not affected.
Certain WithSecure products allow a remote crash of a scanning engine via processing of an import struct in a PE file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.
Certain WithSecure products allow a remote crash of a scanning engine via unpacking of a PE file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.
An issue was discovered in O-RAN Software Community ric-plt-e2mgr in the G-Release environment, allows remote attackers to cause a denial of service (DoS) via a crafted request to the E2Manager API component.
The moment module before 2.19.3 for Node.js is prone to a regular expression denial of service via a crafted date string, a different vulnerability than CVE-2016-4055.
Array AG OS before 9.4.0.499 allows denial of service: remote attackers can cause system service processes to crash through abnormal HTTP operations.
FON2601E-SE, FON2601E-RE, FON2601E-FSW-S, and FON2601E-FSW-B with firmware versions 1.1.7 and earlier contain an issue where they may behave as open resolvers. If this vulnerability is exploited, FON routers may be leveraged for DNS amplification attacks to some other entities.
An adversary could cause a continuous restart loop to the entire device by sending a large quantity of HTTP GET requests if the controller has the built-in web server enabled but does not have the built-in web server completely set up and configured for the SNAP PAC S1 Firmware version R10.3b
The WBM web application on firmwares prior to 03.02.02 and 03.01.07 on the WAGO PFC100 and PFC2000, respectively, runs on a lighttpd web server and makes use of the FastCGI module, which is intended to provide high performance for all Internet applications without the penalties of Web server APIs. However, the default configuration of this module appears to limit the number of concurrent php-cgi processes to two, which can be abused to cause a denial of service of the entire web server. This affects WAGO PFC200 Firmware version 03.00.39(12) and version 03.01.07(13), and WAGO PFC100 Firmware version 03.00.39(12) and version 03.02.02(14).
Katello has a Denial of Service vulnerability in API OAuth authentication
Mattermost fails to properly limit the characters allowed in different fields of a block in Mattermost Boards allowing a attacker to consume excessive resources, possibly leading to Denial of Service, by patching the field of a block using a specially crafted string.
In Node.js including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1, an attacker can cause a Denial of Service (DoS) by establishing an HTTP or HTTPS connection in keep-alive mode and by sending headers very slowly. This keeps the connection and associated resources alive for a long period of time. Potential attacks are mitigated by the use of a load balancer or other proxy layer. This vulnerability is an extension of CVE-2018-12121, addressed in November and impacts all active Node.js release lines including 6.x before 6.17.0, 8.x before 8.15.1, 10.x before 10.15.2, and 11.x before 11.10.1.
The socket implementation in net/core/sock.c in the Linux kernel before 2.6.35 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service by sending a large amount of network traffic, related to the sk_add_backlog function and the sk_rmem_alloc socket field. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4251.
IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, 11.5 is vulnerable to denial of service under extreme stress conditions. IBM X-Force ID: 264807.
An adversary could crash the entire device by sending a large quantity of ICMP requests if the controller has the built-in web server enabled but does not have the built-in web server completely set up and configured for the SNAP PAC S1 Firmware version R10.3b
In certain conditions for Calico Typha (v3.26.2, v3.25.1 and below), and Calico Enterprise Typha (v3.17.1, v3.16.3, v3.15.3 and below), a client TLS handshake can block the Calico Typha server indefinitely, resulting in denial of service. The TLS Handshake() call is performed inside the main server handle for loop without any timeout allowing an unclean TLS handshake to block the main loop indefinitely while other connections will be idle waiting for that handshake to finish.
An uncaught exception issue discovered in Softing OPC UA C++ SDK before 6.30 for Windows operating system may cause the application to crash when the server wants to send an error packet, while socket is blocked on writing.
An issue in the component /userRpm/NetworkCfgRpm of TP-Link TL-WR1041N V2 allows attackers to cause a Denial of Service (DoS) via a crafted GET request.
In Splunk Enterprise versions lower than 8.2.12, 9.0.6, and 9.1.1, an attacker can use the `printf` SPL function to perform a denial of service (DoS) against the Splunk Enterprise instance.
When TCP Verified Accept is enabled on a TCP profile that is configured on a Virtual Server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
In Splunk Enterprise versions lower than 9.0.6 and 8.2.12, a malicious actor can send a malformed security assertion markup language (SAML) request to the `/saml/acs` REST endpoint which can cause a denial of service through a crash or hang of the Splunk daemon.
A possible denial of service vulnerability exists in Rack <2.0.9.1, <2.1.4.1 and <2.2.3.1 in the multipart parsing component of Rack.
The string module is a module that provides extra string operations. The string module is vulnerable to regular expression denial of service when specifically crafted untrusted user input is passed into the underscore or unescapeHTML methods.
OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. Due to the misuse of `log.Fatalf`, the application using coraza crashed after receiving crafted requests from attackers. The application will immediately crash after receiving a malicious request that triggers an error in `mime.ParseMediaType`. This issue was patched in version 3.0.1.
A denial of service flaw was found in the way the server component of Freeciv before 2.3.4 processed certain packets. A remote attacker could send a specially-crafted packet that, when processed would lead to memory exhaustion or excessive CPU consumption.
Passport-SAML is a SAML 2.0 authentication provider for Passport, the Node.js authentication library. Prior to version 3.1.0, a malicious SAML payload can require transforms that consume significant system resources to process, thereby resulting in reduced or denied service. This would be an effective way to perform a denial-of-service attack. This has been resolved in version 3.1.0. The resolution is to limit the number of allowable transforms to 2.
libp2p is a networking stack and library modularized out of The IPFS Project, and bundled separately for other tools to use. In go-libp2p, by using signed peer records a malicious actor can store an arbitrary amount of data in a remote node’s memory. This memory does not get garbage collected and so the victim can run out of memory and crash. If users of go-libp2p in production are not monitoring memory consumption over time, it could be a silent attack i.e. the attacker could bring down nodes over a period of time (how long depends on the node resources i.e. a go-libp2p node on a virtual server with 4 gb of memory takes about 90 sec to bring down; on a larger server, it might take a bit longer.) This issue was patched in version 0.27.4.
IBM WebSphere Application Server Liberty 22.0.0.13 through 23.0.0.7 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 262567.
mod_auth_openidc is an OpenID Certified™ authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. In affected versions missing input validation on mod_auth_openidc_session_chunks cookie value makes the server vulnerable to a denial of service (DoS) attack. An internal security audit has been conducted and the reviewers found that if they manipulated the value of the mod_auth_openidc_session_chunks cookie to a very large integer, like 99999999, the server struggles with the request for a long time and finally gets back with a 500 error. Making a few requests of this kind caused our server to become unresponsive. Attackers can craft requests that would make the server work very hard (and possibly become unresponsive) and/or crash with minimal effort. This issue has been addressed in version 2.4.15.2. Users are advised to upgrade. There are no known workarounds for this vulnerability.
The documentation of Apache Tomcat 10.1.0-M1 to 10.1.0-M14, 10.0.0-M1 to 10.0.20, 9.0.13 to 9.0.62 and 8.5.38 to 8.5.78 for the EncryptInterceptor incorrectly stated it enabled Tomcat clustering to run over an untrusted network. This was not correct. While the EncryptInterceptor does provide confidentiality and integrity protection, it does not protect against all risks associated with running over any untrusted network, particularly DoS risks.
IBM TXSeries for Multiplatforms 8.1, 8.2, and 9.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. IBM X-Force ID: 262905.
Dell OS10 Networking Switches running 10.5.2.x and above contain an Uncontrolled Resource Consumption (Denial of Service) vulnerability, when switches are configured with VLT and VRRP. A remote unauthenticated user can cause the network to be flooded leading to Denial of Service for actual network users. This is a high severity vulnerability as it allows an attacker to cause an outage of network. Dell recommends customers to upgrade at the earliest opportunity.
PTC’s KEPServerEX Versions 6.0 to 6.14.263 are vulnerable to being made to read a recursively defined object that leads to uncontrolled resource consumption. KEPServerEX uses OPC UA, a protocol which defines various object types that can be nested to create complex arrays. It does not implement a check to see if such an object is recursively defined, so an attack could send a maliciously created message that the decoder would try to decode until the stack overflowed and the device crashed.
An exploitable denial-of-service vulnerability exists in the Weave daemon of the Nest Cam IQ Indoor, version 4620002. A set of TCP connections can cause unrestricted resource allocation, resulting in a denial of service. An attacker can connect multiple times to trigger this vulnerability.
A flaw was found within the handling of SMB2_READ commands in the kernel ksmbd module. The issue results from not releasing memory after its effective lifetime. An attacker can leverage this to create a denial-of-service condition on affected installations of Linux. Authentication is not required to exploit this vulnerability, but only systems with ksmbd enabled are vulnerable.
The IPv6 implementation in Apple Mac OS X (unknown versions, year 2012 and earlier) allows remote attackers to cause a denial of service via a flood of ICMPv6 Router Advertisement packets containing multiple Routing entries.
Inductive Automation Ignition ConditionRefresh Resource Exhaustion Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Inductive Automation Ignition. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of OPC UA ConditionRefresh requests. By sending a large number of requests, an attacker can consume all available resources on the server. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-20499.
Open5GS MME versions <= 2.6.4 contain a reachable assertion in the `UE Context Release Request` packet handler. A packet containing an invalid `MME_UE_S1AP_ID` field causes Open5gs to crash; an attacker may repeatedly send such packets to cause denial of service.
.NET and Visual Studio Denial of Service Vulnerability
DHCP Server Service Denial of Service Vulnerability
A flaw was found in Keylime. Due to their blocking nature, the Keylime registrar is subject to a remote denial of service against its SSL connections. This flaw allows an attacker to exhaust all available connections.
Open5GS MME versions <= 2.6.4 contains an assertion that can be remotely triggered via a malformed ASN.1 packet over the S1AP interface. An attacker may send a `UE Context Release Request` message missing a required `MME_UE_S1AP_ID` field to repeatedly crash the MME, resulting in denial of service.
OPC UA .NET Standard Stack 1.04.368 allows a remote attacker to cause a server to crash via a large number of messages that trigger Uncontrolled Resource Consumption.
.NET Core and Visual Studio Denial of Service Vulnerability
cmark-gfm is an extended version of the C reference implementation of CommonMark, a rationalized version of Markdown syntax with a spec. Three polynomial time complexity issues in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. These vulnerabilities have been patched in 0.29.0.gfm.12.
silverstripe-graphql is a package which serves Silverstripe data in GraphQL representations. An attacker could use a recursive graphql query to execute a Distributed Denial of Service attack (DDOS attack) against a website. This mostly affects websites with publicly exposed graphql schemas. If your Silverstripe CMS project does not expose a public facing graphql schema, a user account is required to trigger the DDOS attack. If your site is hosted behind a content delivery network (CDN), such as Imperva or CloudFlare, this may further mitigate the risk. This issue has been addressed in versions 3.8.2, 4.1.3, 4.2.5, 4.3.4, and 5.0.3. Users are advised to upgrade. There are no known workarounds for this vulnerability.
goproxy v1.1 was discovered to contain an issue which can lead to a Denial of service (DoS) via unspecified vectors.
Windows TCP/IP Denial of Service Vulnerability
A vulnerability has been identified in SIMATIC MV540 H (All versions < V3.3.4), SIMATIC MV540 S (All versions < V3.3.4), SIMATIC MV550 H (All versions < V3.3.4), SIMATIC MV550 S (All versions < V3.3.4), SIMATIC MV560 U (All versions < V3.3.4), SIMATIC MV560 X (All versions < V3.3.4). Affected devices cannot properly process specially crafted Ethernet frames sent to the devices. This could allow an unauthenticated remote attacker to cause a denial of service condition. The affected devices must be restarted manually.
Parsing malicious or large YAML documents can consume excessive amounts of CPU or memory.