In version 0.3.32 of open-webui/open-webui, the absence of authentication mechanisms allows any unauthenticated attacker to access the `api/v1/utils/code/format` endpoint. If a malicious actor sends a POST request with an excessively high volume of content, the server could become completely unresponsive. This could lead to severe performance issues, causing the server to become unresponsive or experience significant degradation, ultimately resulting in service interruptions for legitimate users.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer for deploying microservices. There is a vulnerability in Go when parsing the HTTP headers, which impacts Traefik. HTTP header parsing could allocate substantially more memory than required to hold the parsed headers. This behavior could be exploited to cause a denial of service. This issue has been patched in versions 2.9.10 and 2.10.0-rc2.

go-libp2p is the offical libp2p implementation in the Go programming language. Version `0.18.0` and older of go-libp2p are vulnerable to targeted resource exhaustion attacks. These attacks target libp2p’s connection, stream, peer, and memory management. An attacker can cause the allocation of large amounts of memory, ultimately leading to the process getting killed by the host’s operating system. While a connection manager tasked with keeping the number of connections within manageable limits has been part of go-libp2p, this component was designed to handle the regular churn of peers, not a targeted resource exhaustion attack. Users are advised to upgrade their version of go-libp2p to version `0.18.1` or newer. Users unable to upgrade may consult the denial of service (dos) mitigation page for more information on how to incorporate mitigation strategies, monitor your application, and respond to attacks.

An issue was discovered in Django 1.11.x before 1.11.23, 2.1.x before 2.1.11, and 2.2.x before 2.2.4. If django.utils.text.Truncator's chars() and words() methods were passed the html=True argument, they were extremely slow to evaluate certain inputs due to a catastrophic backtracking vulnerability in a regular expression. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which were thus vulnerable.

An issue discovered in H3C Magic R365 and H3C Magic R100 routers allows attackers to hijack TCP sessions which could lead to a denial of service.

A flaw was found in GLib. GVariant deserialization fails to validate that the input conforms to the expected format, leading to denial of service.

A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.

An issue was discovered in ebankIT before 7. A Denial-of-Service attack is possible through the GET parameter EStatementsIds located on the /Controls/Generic/EBMK/Handlers/EStatements/DownloadEStatement.ashx endpoint. The GET parameter accepts over 100 comma-separated e-statement IDs without throwing an error. When this many IDs are supplied, the server takes around 60 seconds to respond and successfully generate the expected ZIP archive (during this time period, no other pages load). A threat actor could issue a request to this endpoint with 100+ statement IDs every 30 seconds, potentially resulting in an overload of the server for all users.

Profinet-IO (PNIO) stack versions prior V06.00 do not properly limit internal resource allocation when multiple legitimate diagnostic package requests are sent to the DCE-RPC interface. This could lead to a denial of service condition due to lack of memory for devices that include a vulnerable version of the stack. The security vulnerability could be exploited by an attacker with network access to an affected device. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise the availability of the device.

A vulnerability has been identified in SIMATIC WinAC RTX (F) 2010 (All versions < SP3 Update 1). Affected versions of the software contain a vulnerability that could allow an unauthenticated attacker to trigger a denial-of-service condition. The vulnerability can be triggered if a large HTTP request is sent to the executing service. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the service provided by the software.

Unpoly is a JavaScript framework for server-side web applications. There is a possible Denial of Service (DoS) vulnerability in the `unpoly-rails` gem that implements the Unpoly server protocol for Rails applications. This issues affects Rails applications that operate as an upstream of a load balancer's that uses passive health checks. The `unpoly-rails` gem echoes the request URL as an `X-Up-Location` response header. By making a request with exceedingly long URLs (paths or query string), an attacker can cause unpoly-rails to write a exceedingly large response header. If the response header is too large to be parsed by a load balancer downstream of the Rails application, it may cause the load balancer to remove the upstream from a load balancing group. This causes that application instance to become unavailable until a configured timeout is reached or until an active healthcheck succeeds. This issue has been fixed and released as version 2.7.2.2 which is available via RubyGems and GitHub. Users unable to upgrade may: Configure your load balancer to use active health checks, e.g. by periodically requesting a route with a known response that indicates healthiness; Configure your load balancer so the maximum size of response headers is at least twice the maximum size of a URL; or instead of changing your server configuration you may also configure your Rails application to delete redundant `X-Up-Location` headers set by unpoly-rails.

A vulnerability has been identified in SIMATIC ET 200pro IM154-8 PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200pro IM154-8F PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200pro IM154-8FX PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200S IM151-8 PN/DP CPU (All versions < V3.X.17), SIMATIC ET 200S IM151-8F PN/DP CPU (All versions < V3.X.17), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.1), SIMATIC S7-300 CPU 314C-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315F-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 315T-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317F-2 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317T-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 317TF-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 319-3 PN/DP (All versions < V3.X.17), SIMATIC S7-300 CPU 319F-3 PN/DP (All versions < V3.X.17), SIMATIC S7-400 PN/DP V6 and below CPU family (incl. SIPLUS variants) (All versions), SIMATIC S7-400 PN/DP V7 CPU family (incl. SIPLUS variants) (All versions), SIMATIC WinAC RTX 2010 (All versions), SIMATIC WinAC RTX F 2010 (All versions), SIPLUS ET 200S IM151-8 PN/DP CPU (All versions < V3.X.17), SIPLUS ET 200S IM151-8F PN/DP CPU (All versions < V3.X.17), SIPLUS S7-300 CPU 314C-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 315-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 315F-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 317-2 PN/DP (All versions < V3.X.17), SIPLUS S7-300 CPU 317F-2 PN/DP (All versions < V3.X.17). Affected devices contain a vulnerability that could cause a denial of service condition of the web server by sending specially crafted HTTP requests to ports 80/tcp and 443/tcp. Beyond the web service, no other functions or interfaces are affected by the denial of service condition.

all versions of url-regex are vulnerable to Regular Expression Denial of Service. An attacker providing a very long string in String.test can cause a Denial of Service.

Those using HtmlUnit to browse untrusted webpages may be vulnerable to Denial of service attacks (DoS). If HtmlUnit is running on user supplied web pages, an attacker may supply content that causes HtmlUnit to crash by a stack overflow. This effect may support a denial of service attack.This issue affects htmlunit before 2.70.0.

In Spring Framework versions 6.0.15 and 6.1.2, it is possible for a user to provide specially crafted HTTP requests that may cause a denial-of-service (DoS) condition. Specifically, an application is vulnerable when all of the following are true: * the application uses Spring MVC * Spring Security 6.1.6+ or 6.2.1+ is on the classpath Typically, Spring Boot applications need the org.springframework.boot:spring-boot-starter-web and org.springframework.boot:spring-boot-starter-security dependencies to meet all conditions.

Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows a denial of service (worker crash and unresponsiveness) because some inputs cause a segfault in the Transaction class for some configurations.

Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted.

In GraphQL Java (aka graphql-java) before 20.1, an attacker can send a crafted GraphQL query that causes stack consumption. The fixed versions are 20.1, 19.4, 18.4, 17.5, and 0.0.0-2023-03-20T01-49-44-80e3135.

A vulnerability in the filesystem resource management code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to exhaust filesystem resources on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to ineffective management of the underlying filesystem resources. An attacker could exploit this vulnerability by performing specific actions that result in messages being sent to specific operating system log files. A successful exploit could allow the attacker to exhaust available filesystem space on an affected device. This could cause the device to crash and reload, resulting in a DoS condition for clients whose network traffic is transiting the device. Upon reload of the device, the impacted filesystem space is cleared, and the device will return to normal operation. However, continued exploitation of this vulnerability could cause subsequent forced crashes and reloads, which could lead to an extended DoS condition.

Nextcloud server is an open source home cloud implementation. In releases of the 25.0.x branch before 25.0.3 an inefficient fetch operation may impact server performances and/or can lead to a denial of service. This issue has been addressed and it is recommended that the Nextcloud Server is upgraded to 25.0.3. There are no known workarounds for this vulnerability.

The crewjam/saml go library contains a partial implementation of the SAML standard in golang. Prior to version 0.4.13, the package's use of `flate.NewReader` does not limit the size of the input. The user can pass more than 1 MB of data in the HTTP request to the processing functions, which will be decompressed server-side using the Deflate algorithm. Therefore, after repeating the same request multiple times, it is possible to achieve a reliable crash since the operating system kills the process. This issue is patched in version 0.4.13.

`silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability.

A vulnerability in the HTTP server code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the HTTP server to crash. The vulnerability is due to a logical error in the logging mechanism. An attacker could exploit this vulnerability by generating a high amount of long-lived connections to the HTTP service on the device. A successful exploit could allow the attacker to cause the HTTP server to crash.

Array AG OS before 9.4.0.499 allows denial of service: remote attackers can cause system service processes to crash through abnormal HTTP operations.

In Apache SpamAssassin before 3.4.3, a message can be crafted in a way to use excessive resources. Upgrading to SA 3.4.3 as soon as possible is the recommended fix but details will not be shared publicly.

A vulnerability has been identified where a maliciously crafted message containing a specific chain of characters can cause the chat to enter a hot loop on one of the processes, consuming ~120% CPU and rendering the service unresponsive.

The skge driver 1.5 in Linux kernel 2.6.15 on Ubuntu does not properly use the spin_lock and spin_unlock functions, which allows remote attackers to cause a denial of service (machine crash) via a flood of network traffic.

An issue was discovered in Technitium 11.0.2. There is a vulnerability (called BadDNS) in DNS resolving software, which triggers a resolver to ignore valid responses, thus causing DoS (denial of service) for normal resolution. The effects of an exploit would be widespread and highly impactful, because the attacker could just forge a response targeting the source port of a vulnerable resolver without the need to guess the correct TXID.

comrak is a CommonMark + GFM compatible Markdown parser and renderer written in rust. A range of quadratic parsing issues are present in Comrak. These can be used to craft denial-of-service attacks on services that use Comrak to parse Markdown. This issue has been addressed in version 0.17.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as `GHSL-2023-047`

Zoho ManageEngine ADSelfService Plus before 6218 allows anyone to conduct a Denial-of-Service attack via the Mobile App Authentication API.

In OpenBSD 7.2, a TCP packet with destination port 0 that matches a pf divert-to rule can crash the kernel.

Jenkins 2.393 and earlier, LTS 2.375.3 and earlier uses the Apache Commons FileUpload library without specifying limits for the number of request parts introduced in version 1.5 for CVE-2023-24998 in hudson.util.MultipartFormDataParser, allowing attackers to trigger a denial of service.

An issue found in DUALSPACE Super Secuirty v.2.3.7 allows an attacker to cause a denial of service via the SharedPreference files.

NanoMQ v0.17.9 was discovered to contain a heap use-after-free vulnerability via the component sub_Ctx_handle. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted SUBSCRIBE message.

ClamAV versions prior to 0.101.3 are susceptible to a zip bomb vulnerability where an unauthenticated attacker can cause a denial of service condition by sending crafted messages to an affected system.

A denial-of-service vulnerability exists in Rockwell Automation FactoryTalk Transaction Manager. This vulnerability can be exploited by sending a modified packet to port 400. If exploited, the application could potentially crash or experience a high CPU or memory usage condition, causing intermittent application functionality issues. The application would need to be restarted to recover from the DoS.

Unspecified vulnerability in Adobe Flash Media Server (FMS) before 3.5.3 allows attackers to cause a denial of service (resource exhaustion) via unknown vectors.

Jenkins 2.393 and earlier, LTS 2.375.3 and earlier uses the Apache Commons FileUpload library without specifying limits for the number of request parts introduced in version 1.5 for CVE-2023-24998 in org.kohsuke.stapler.RequestImpl, allowing attackers to trigger a denial of service.

Tensorflow is an Open Source Machine Learning Framework. The `GraphDef` format in TensorFlow does not allow self recursive functions. The runtime assumes that this invariant is satisfied. However, a `GraphDef` containing a fragment such as the following can be consumed when loading a `SavedModel`. This would result in a stack overflow during execution as resolving each `NodeDef` means resolving the function itself and its nodes. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range.

An issue found in WHOv.1.0.28, v.1.0.30, v.1.0.32 allows an attacker to cause a denial of service via the SharedPreference files.

crossplane-runtime is a set of go libraries used to build Kubernetes controllers in Crossplane and its related stacks. An out of memory panic vulnerability has been discovered in affected versions. Applications that use the `Paved` type's `SetValue` method with user provided input without proper validation might use excessive amounts of memory and cause an out of memory panic. In the fieldpath package, the Paved.SetValue method sets a value on the Paved object according to the provided path, without any validation. This allows setting values in slices at any provided index, which grows the target array up to the requested index, the index is currently capped at max uint32 (4294967295) given how indexes are parsed, but that is still an unnecessarily large value. If callers are not validating paths' indexes on their own, which most probably are not going to do, given that the input is parsed directly in the SetValue method, this could allow users to consume arbitrary amounts of memory. Applications that do not use the `Paved` type's `SetValue` method are not affected. This issue has been addressed in versions 0.16.1 and 0.19.2. Users are advised to upgrade. Users unable to upgrade can parse and validate the path before passing it to the `SetValue` method of the `Paved` type, constraining the index size as deemed appropriate.

IBM Watson CP4D Data Stores 4.6.0 does not properly allocate resources without limits or throttling which could allow a remote attacker with information specific to the system to cause a denial of service. IBM X-Force ID: 248924.

The package ua-parser-js before 0.7.22 are vulnerable to Regular Expression Denial of Service (ReDoS) via the regex for Redmi Phones and Mi Pad Tablets UA.

A vulnerability in the WebVPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause increased CPU utilization on an affected device. The vulnerability is due to excessive processing load for a specific WebVPN HTTP page request. An attacker could exploit this vulnerability by sending multiple WebVPN HTTP page load requests for a specific URL. A successful exploit could allow the attacker to increase CPU load on the device, resulting in a denial of service (DoS) condition, which could cause traffic to be delayed through the device.

Versions of the package asyncua before 0.9.96 are vulnerable to Denial of Service (DoS) such that an attacker can send a malformed packet and as a result, the server will enter into an infinite loop and consume excessive memory.

An issue was discovered in GitLab Community and Enterprise Edition before 12.0.3. One of the parsers used by Gilab CI was vulnerable to a resource exhaustion attack. It allows Uncontrolled Resource Consumption.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.