An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved:  * 21.1-EVO versions 21.1R1-EVO and later before 21.2R3-S8-EVO,  * 21.4-EVO versions before 21.4R3-S7-EVO, * 22.1-EVO versions before 22.1R3-S6-EVO,  * 22.2-EVO versions before 22.2R3-EVO, * 22.3-EVO versions before 22.3R2-EVO.

An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved: All versions before 20.4R3-S7-EVO, 21.2-EVO versions before 21.2R3-S8-EVO, 21.4-EVO versions before 21.4R3-S7-EVO,  22.2-EVO versions before 22.2R3-EVO, 22.3-EVO versions before 22.3R2-EVO, 22.4-EVO versions before 22.4R2-EVO.

Multiple vulnerabilities exist in the AOS-CX command line interface that could lead to authenticated command injection. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete switch compromise in ArubaOS-CX version(s): AOS-CX 10.09.xxxx: 10.09.1030 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below, AOS-CX 10.06.xxxx: 10.06.0180 and below. Aruba has released upgrades for ArubaOS-CX Switch Devices that address these security vulnerabilities.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow local network users to execute commands via unspecified vectors. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in addBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiIsolator version 1.0.0, FortiIsolator version 1.1.0, FortiIsolator version 1.2.0 through 1.2.2, FortiIsolator version 2.0.0 through 2.0.1, FortiIsolator version 2.1.0 through 2.1.2, FortiIsolator version 2.2.0, FortiIsolator version 2.3.0 through 2.3.4 allows attacker to execute arbitrary OS commands in the underlying shell via specially crafted input parameters.

An improper neutralization of special elements used in an OS Command vulnerability [CWE-78] in FortiAP-C console 5.4.0 through 5.4.3, 5.2.0 through 5.2.1 may allow an authenticated attacker to execute unauthorized commands by running CLI commands with specifically crafted arguments.

IBM AIX 7.1, 7.2, 7.3, and VIOS 3.1 could allow a non-privileged local user to exploit a vulnerability in the invscout command to execute arbitrary commands. IBM X-Force ID: 251207.

IBM InfoSphere Information Server 11.7 could allow a locally authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in FortiADC 7.2.0, 7.1.0 through 7.1.1 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved: * All version before 20.4R3-S6-EVO,  * 21.2-EVO versions before 21.2R3-S4-EVO, * 21.4-EVO versions before 21.4R3-S6-EVO,  * 22.2-EVO versions before 22.2R2-S1-EVO, 22.2R3-EVO,  * 22.3-EVO versions before 22.3R2-EVO.

VMware NSX Edge contains a CLI shell injection vulnerability. A malicious actor with SSH access to an NSX-Edge appliance can execute arbitrary commands on the operating system as root.

An Improper Neutralization of Special Elements vulnerability in Juniper Networks Junos OS Evolved commands allows a local, authenticated attacker with low privileges to escalate their privileges to 'root' leading to a full compromise of the system. The Junos OS Evolved CLI doesn't properly handle command options in some cases, allowing users which execute specific CLI commands with a crafted set of parameters to escalate their privileges to root on shell level. This issue affects Junos OS Evolved: * 22.3-EVO versions before 22.3R2-EVO, * 22.4-EVO versions before 22.4R1-S1-EVO, 22.4R2-EVO.

All versions of the package bwm-ng are vulnerable to Command Injection due to improper input sanitization in the 'check' function in the bwm-ng.js file. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

A CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that allows a local privilege escalation on the appliance when a maliciously crafted Operating System command is entered on the device. Affected products: StruxureWare Data Center Expert (V7.9.2 and prior)

All versions of the package keep-module-latest are vulnerable to Command Injection due to missing input sanitization or other checks and sandboxes being employed to the installModule function. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

An improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78 ] in FortiManager 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions, FortiAnalyzer 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions and FortiADC  7.1.0, 7.0.0 through 7.0.3, 6.2 all versions, 6.1 all versions, 6.0 all versions management interface may allow an authenticated attacker with at least READ permissions on system settings to execute arbitrary commands on the underlying shell due to an unsafe usage of the wordexp function.

All versions of the package n158 are vulnerable to Command Injection due to improper input sanitization in the 'module.exports' function. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

Multiple improper neutralization of special elements used in an os command ('OS Command Injection') vulnerabilties [CWE-78] in Fortinet FortiADCManager version 7.1.0 and before 7.0.0, FortiADC version 7.2.0 and before 7.1.2 allows a local authenticated attacker to execute arbitrary shell code as `root` user via crafted CLI requests.

DrayTek Vigor2960 v1.5.1.4 allows an authenticated attacker with network access to the web management interface to inject operating system commands via the mainfunction.cgi 'parameter' parameter. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Dell VxRail versions earlier than 7.0.450, contain(s) an OS command injection vulnerability in VxRail Manager. A local authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

ProtonVPN before 3.2.10 on Windows mishandles the drive installer path, which should use this: '"' + ExpandConstant('{autopf}\Proton\Drive') + '"' in Setup/setup.iss.

A shell command injection vulnerability in the PAN-OS CLI allows a local authenticated user to escape the restricted shell and escalate privileges. This issue affects only PAN-OS 8.1 versions earlier than PAN-OS 8.1.13. This issue does not affect PAN-OS 7.1, PAN-OS 9.0, or later PAN-OS versions. This issue is fixed in PAN-OS 8.1.13, and all later versions.

A vulnerability classified as critical was found in KylinSoft youker-assistant on KylinOS. Affected by this vulnerability is the function adjust_cpufreq_scaling_governer. The manipulation leads to os command injection. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.4.13 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-226099.

Win32k Elevation of Privilege Vulnerability

Multiple vulnerabilities in the restricted shell of Cisco Evolved Programmable Network Manager (EPNM), Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to escape the restricted shell and gain root privileges on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.

A vulnerability, which was classified as critical, was found in kylin-system-updater up to 1.4.20kord on Ubuntu Kylin. Affected is the function InstallSnap of the component Update Handler. The manipulation leads to command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-222600.

Phicomm K2 v22.6.534.263 was discovered to contain a command injection vulnerability via the autoUpTime parameter in the automatic upgrade function.

The default console presented to users over telnet (when enabled) is restricted to a subset of commands. Commands issued at this console, however, appear to be fed directly into a system call or other similar function. This allows any authenticated user to execute arbitrary commands on the device.

OS Command injection vulnerability in sleuthkit fls tool 4.11.1 allows attackers to execute arbitrary commands via a crafted value to the m parameter. NOTE: third parties have disputed this because there is no analysis showing that the backtick command executes outside the context of the user account that entered the command line.

spice-vdagent up to and including 0.17.0 does not properly escape save directory before passing to shell, allowing local attacker with access to the session the agent runs in to inject arbitrary commands to be executed.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 7.0.0 through 7.0.3, FortiADC version 7.1.0 through 7.1.1, FortiADC version 7.0.0 through 7.0.3, FortiADC 6.2 all versions, FortiADC 6.1 all versions, FortiADC 6.0 all versions, FortiADC 5.4 all versions, FortiADC 5.3 all versions, FortiADC 5.2 all versions, FortiADC 5.1 all versions allows attacker to execute unauthorized code or commands via specifically crafted arguments to existing commands.

IBM Spectrum Scale 5.1.0.1 through 5.1.4.1 could allow a local attacker to execute arbitrary commands in the container. IBM X-Force ID: 239437.

Tenda AC1200 Router Model W15Ev2 V15.11.0.10(1576) was discovered to contain a command injection vulnerability via the PortMappingServer parameter in the setPortMapping function.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiAP-S 6.2 all verisons, and 6.4.0 through 6.4.9, FortiAP-W2 6.4 all versions, 7.0 all versions, 7.2.0 through 7.2.3, and 7.4.0 through 7.4.2, FortiAP 6.4 all versions, 7.0 all versions, 7.2.0 through 7.2.3, and 7.4.0 through 7.4.2 allow a local authenticated attacker to execute unauthorized code via the CLI.

An issue was discovered in Pi-Hole through 5.0. The local www-data user has sudo privileges to execute the pihole core script as root without a password, which could allow an attacker to obtain root access via shell metacharacters to this script's setdns command.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

Sourcegraph is a code intelligence platform. In versions prior to 4.1.0 a command Injection vulnerability existed in the gitserver service, present in all Sourcegraph deployments. This vulnerability was caused by a lack of input validation on the host parameter of the `/list-gitolite` endpoint. It was possible to send a crafted request to gitserver that would execute commands inside the container. Successful exploitation requires the ability to send local requests to gitserver. The issue is patched in version 4.1.0.

Tenda AC1200 Router Model W15Ev2 V15.11.0.10(1576) was discovered to contain a command injection vulnerability via the dmzHost parameter in the setDMZ function.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in FortiADC 5.x all versions, 6.0 all versions, 6.1 all versions, 6.2.0 through 6.2.4, 7.0.0 through 7.0.3, 7.1.0; FortiDDoS 4.x all versions, 5.0 all versions, 5.1 all versions, 5.2 all versions, 5.3 all versions, 5.4 all versions, 5.5 all versions, 5.6 all versions and FortiDDoS-F 6.4.0, 6.3.0 through 6.3.3, 6.2.0 through 6.2.2, 6.1.0 through 6.1.4 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

Command injection vulnerability in Movistar 4G router affecting version ES_WLD71-T1_v2.0.201820. This vulnerability allows an authenticated user to execute commands inside the router by making a POST request to the URL '/cgi-bin/gui.cgi'.

In Tenda AC1200 Router model W15Ev2 V15.11.0.10(1576), there exists a command injection vulnerability in the function formSetFixTools. This vulnerability allows attackers to run arbitrary commands on the server via the hostname parameter.

Tenda AC1200 Router Model W15Ev2 V15.11.0.10(1576) was discovered to contain multiple command injection vulnerabilities in the function setIPsecTunnelList via the IPsecLocalNet and IPsecRemoteNet parameters.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Airflow Hive Provider, Apache Airflow allows an attacker to execute arbtrary commands in the task execution context, without write access to DAG files. This issue affects Hive Provider versions prior to 4.1.0. It also impacts any Apache Airflow versions prior to 2.3.0 in case HIve Provider is installed (Hive Provider 4.1.0 can only be installed for Airflow 2.3.0+). Note that you need to manually install the HIve Provider version 4.1.0 in order to get rid of the vulnerability on top of Airflow 2.3.0+ version that has lower version of the Hive Provider installed).

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_cifssupport utility. An authenticated attacker could potentially exploit this vulnerability, escaping the restricted shell and execute arbitrary operating system commands with root privileges.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability in its svc_nas utility. An authenticated attacker could potentially exploit this vulnerability, escaping the restricted shell and execute arbitrary operating system commands with root privileges.

Dell Unity, versions prior to 5.4, contains an OS Command Injection Vulnerability within its svc_udoctor utility. An authenticated malicious user with local access could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

TOTOLINK A810R V5.9c.4050_B20190424 was discovered to contain a command injection vulnerability via the component downloadFile.cgi.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a command injection vulnerability via the ip parameter at the function setDiagnosisCfg.