In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free A recent DRM series purporting to simplify support for "transparent bridges" and handling of probe deferrals ironically exposed a use-after-free issue on pmic_glink_altmode probe deferral. This has manifested itself as the display subsystem occasionally failing to initialise and NULL-pointer dereferences during boot of machines like the Lenovo ThinkPad X13s. Specifically, the dp-hpd bridge is currently registered before all resources have been acquired which means that it can also be deregistered on probe deferrals. In the meantime there is a race window where the new aux bridge driver (or PHY driver previously) may have looked up the dp-hpd bridge and stored a (non-reference-counted) pointer to the bridge which is about to be deallocated. When the display controller is later initialised, this triggers a use-after-free when attaching the bridges: dp -> aux -> dp-hpd (freed) which may, for example, result in the freed bridge failing to attach: [drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16 or a NULL-pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Call trace: drm_bridge_attach+0x70/0x1a8 [drm] drm_aux_bridge_attach+0x24/0x38 [aux_bridge] drm_bridge_attach+0x80/0x1a8 [drm] dp_bridge_init+0xa8/0x15c [msm] msm_dp_modeset_init+0x28/0xc4 [msm] The DRM bridge implementation is clearly fragile and implicitly built on the assumption that bridges may never go away. In this case, the fix is to move the bridge registration in the pmic_glink_altmode driver to after all resources have been looked up. Incidentally, with the new dp-hpd bridge implementation, which registers child devices, this is also a requirement due to a long-standing issue in driver core that can otherwise lead to a probe deferral loop (see commit fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")). [DB: slightly fixed commit message by adding the word 'commit']

In the Linux kernel, the following vulnerability has been resolved: spi: lpspi: Avoid potential use-after-free in probe() fsl_lpspi_probe() is allocating/disposing memory manually with spi_alloc_host()/spi_alloc_target(), but uses devm_spi_register_controller(). In case of error after the latter call the memory will be explicitly freed in the probe function by spi_controller_put() call, but used afterwards by "devm" management outside probe() (spi_unregister_controller() <- devm_spi_unregister() below). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 ... Call trace: kernfs_find_ns kernfs_find_and_get_ns sysfs_remove_group sysfs_remove_groups device_remove_attrs device_del spi_unregister_controller devm_spi_unregister release_nodes devres_release_all really_probe driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork

A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request.

A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected.

A use-after-free flaw was found in io_uring/filetable.c in io_install_fixed_file in the io_uring subcomponent in the Linux Kernel during call cleanup. This flaw may lead to a denial of service.

An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.

In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end

In the Linux kernel, the following vulnerability has been resolved: NFC: port100: fix use-after-free in port100_send_complete Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: fix possible use-after-free Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: Fix use-after-free bug by not setting udc->dev.driver The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget core. dev_uevent() does: if (dev->driver) add_uevent_var(env, "DRIVER=%s", dev->driver->name); and between the test and the dereference of dev->driver, the gadget core sets dev->driver to NULL. The race wouldn't occur if the gadget core registered its devices on a real bus, using the standard synchronization techniques of the driver core. However, it's not necessary to make such a large change in order to fix this bug; all we need to do is make sure that udc->dev.driver is always NULL. In fact, there is no reason for udc->dev.driver ever to be set to anything, let alone to the value it currently gets: the address of the gadget's driver. After all, a gadget driver only knows how to manage a gadget, not how to manage a UDC. This patch simply removes the statements in the gadget core that touch udc->dev.driver.

In bt driver, there is a thread competition leads to early release of resources to be accessed. This could lead to local denial of service in kernel.

In npu driver, there is a memory corruption due to a use after free. This could lead to local denial of service in kernel.

A use-after-free(UAF) vulnerability was found in function 'vmw_cmd_res_check' in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in Linux kernel's vmwgfx driver with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).

A flaw was found in the Linux kernel’s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.

A component of the HarmonyOS has a Use After Free vulnerability. Local attackers may exploit this vulnerability to cause kernel crash.

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Prevent dead task groups from regaining cfs_rq's Kevin is reporting crashes which point to a use-after-free of a cfs_rq in update_blocked_averages(). Initial debugging revealed that we've live cfs_rq's (on_list=1) in an about to be kfree()'d task group in free_fair_sched_group(). However, it was unclear how that can happen. His kernel config happened to lead to a layout of struct sched_entity that put the 'my_q' member directly into the middle of the object which makes it incidentally overlap with SLUB's freelist pointer. That, in combination with SLAB_FREELIST_HARDENED's freelist pointer mangling, leads to a reliable access violation in form of a #GP which made the UAF fail fast. Michal seems to have run into the same issue[1]. He already correctly diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") is causing the preconditions for the UAF to happen by re-adding cfs_rq's also to task groups that have no more running tasks, i.e. also to dead ones. His analysis, however, misses the real root cause and it cannot be seen from the crash backtrace only, as the real offender is tg_unthrottle_up() getting called via sched_cfs_period_timer() via the timer interrupt at an inconvenient time. When unregister_fair_sched_group() unlinks all cfs_rq's from the dying task group, it doesn't protect itself from getting interrupted. If the timer interrupt triggers while we iterate over all CPUs or after unregister_fair_sched_group() has finished but prior to unlinking the task group, sched_cfs_period_timer() will execute and walk the list of task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the dying task group. These will later -- in free_fair_sched_group() -- be kfree()'ed while still being linked, leading to the fireworks Kevin and Michal are seeing. To fix this race, ensure the dying task group gets unlinked first. However, simply switching the order of unregistering and unlinking the task group isn't sufficient, as concurrent RCU walkers might still see it, as can be seen below: CPU1: CPU2: : timer IRQ: : do_sched_cfs_period_timer(): : : : distribute_cfs_runtime(): : rcu_read_lock(); : : : unthrottle_cfs_rq(): sched_offline_group(): : : walk_tg_tree_from(…,tg_unthrottle_up,…): list_del_rcu(&tg->list); : (1) : list_for_each_entry_rcu(child, &parent->children, siblings) : : (2) list_del_rcu(&tg->siblings); : : tg_unthrottle_up(): unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)]; : : list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); : : : : if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running) (3) : list_add_leaf_cfs_rq(cfs_rq); : : : : : : : : : ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandl ---truncated---

NVIDIA GPU display driver for Windows and Linux contains a vulnerability where referencing memory after it has been freed can lead to denial of service or data tampering.

In the Linux kernel, the following vulnerability has been resolved: sctp: use call_rcu to free endpoint This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix possible deadlock in rfcomm_sk_state_change syzbot reports a possible deadlock in rfcomm_sk_state_change [1]. While rfcomm_sock_connect acquires the sk lock and waits for the rfcomm lock, rfcomm_sock_release could have the rfcomm lock and hit a deadlock for acquiring the sk lock. Here's a simplified flow: rfcomm_sock_connect: lock_sock(sk) rfcomm_dlc_open: rfcomm_lock() rfcomm_sock_release: rfcomm_sock_shutdown: rfcomm_lock() __rfcomm_dlc_close: rfcomm_k_state_change: lock_sock(sk) This patch drops the sk lock before calling rfcomm_dlc_open to avoid the possible deadlock and holds sk's reference count to prevent use-after-free after rfcomm_dlc_open completes.

In the Linux kernel, the following vulnerability has been resolved: x86/mm, kexec, ima: Use memblock_free_late() from ima_free_kexec_buffer() The code calling ima_free_kexec_buffer() runs long after the memblock allocator has already been torn down, potentially resulting in a use after free in memblock_isolate_range(). With KASAN or KFENCE, this use after free will result in a BUG from the idle task, and a subsequent kernel panic. Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid that bug.

Missing lock check in SynHsaService may create a use-after-free condition which causes abnormal termination of the service, resulting in denial of service for the Synaptics Hardware Support App.

A heap use-after-free flaw was found in coders/bmp.c in ImageMagick.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb ---truncated---

A potential use-after-free vulnerability was reported in the Lenovo View driver that could result in denial of service.

An issue was discovered in the ordered-float crate before 1.1.1 and 2.x before 2.0.1 for Rust. A NotNan value can contain a NaN.

Vim is an improved version of the good old UNIX editor Vi. Heap-use-after-free in memory allocated in the function `ga_grow_inner` in in the file `src/alloc.c` at line 748, which is freed in the file `src/ex_docmd.c` in the function `do_cmdline` at line 1010 and then used again in `src/cmdhist.c` at line 759. When using the `:history` command, it's possible that the provided argument overflows the accepted value. Causing an Integer Overflow and potentially later an use-after-free. This vulnerability has been patched in version 9.0.2068.

In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize() If migration succeeded, we called folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the old to the new folio. This will set memcg_data of the old folio to 0. Similarly, if migration failed, memcg_data of the dst folio is left unset. If we call folio_putback_lru() on such folios (memcg_data == 0), we will add the folio to be freed to the LRU, making memcg code unhappy. Running the hmm selftests: # ./hmm-tests ... # RUN hmm.hmm_device_private.migrate ... [ 102.078007][T14893] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff27d200 pfn:0x13cc00 [ 102.079974][T14893] anon flags: 0x17ff00000020018(uptodate|dirty|swapbacked|node=0|zone=2|lastcpupid=0x7ff) [ 102.082037][T14893] raw: 017ff00000020018 dead000000000100 dead000000000122 ffff8881353896c9 [ 102.083687][T14893] raw: 00000007ff27d200 0000000000000000 00000001ffffffff 0000000000000000 [ 102.085331][T14893] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled()) [ 102.087230][T14893] ------------[ cut here ]------------ [ 102.088279][T14893] WARNING: CPU: 0 PID: 14893 at ./include/linux/memcontrol.h:726 folio_lruvec_lock_irqsave+0x10e/0x170 [ 102.090478][T14893] Modules linked in: [ 102.091244][T14893] CPU: 0 UID: 0 PID: 14893 Comm: hmm-tests Not tainted 6.13.0-09623-g6c216bc522fd #151 [ 102.093089][T14893] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 [ 102.094848][T14893] RIP: 0010:folio_lruvec_lock_irqsave+0x10e/0x170 [ 102.096104][T14893] Code: ... [ 102.099908][T14893] RSP: 0018:ffffc900236c37b0 EFLAGS: 00010293 [ 102.101152][T14893] RAX: 0000000000000000 RBX: ffffea0004f30000 RCX: ffffffff8183f426 [ 102.102684][T14893] RDX: ffff8881063cb880 RSI: ffffffff81b8117f RDI: ffff8881063cb880 [ 102.104227][T14893] RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 [ 102.105757][T14893] R10: 0000000000000001 R11: 0000000000000002 R12: ffffc900236c37d8 [ 102.107296][T14893] R13: ffff888277a2bcb0 R14: 000000000000001f R15: 0000000000000000 [ 102.108830][T14893] FS: 00007ff27dbdd740(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000 [ 102.110643][T14893] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 102.111924][T14893] CR2: 00007ff27d400000 CR3: 000000010866e000 CR4: 0000000000750ef0 [ 102.113478][T14893] PKRU: 55555554 [ 102.114172][T14893] Call Trace: [ 102.114805][T14893] <TASK> [ 102.115397][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170 [ 102.116547][T14893] ? __warn.cold+0x110/0x210 [ 102.117461][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170 [ 102.118667][T14893] ? report_bug+0x1b9/0x320 [ 102.119571][T14893] ? handle_bug+0x54/0x90 [ 102.120494][T14893] ? exc_invalid_op+0x17/0x50 [ 102.121433][T14893] ? asm_exc_invalid_op+0x1a/0x20 [ 102.122435][T14893] ? __wake_up_klogd.part.0+0x76/0xd0 [ 102.123506][T14893] ? dump_page+0x4f/0x60 [ 102.124352][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170 [ 102.125500][T14893] folio_batch_move_lru+0xd4/0x200 [ 102.126577][T14893] ? __pfx_lru_add+0x10/0x10 [ 102.127505][T14893] __folio_batch_add_and_move+0x391/0x720 [ 102.128633][T14893] ? __pfx_lru_add+0x10/0x10 [ 102.129550][T14893] folio_putback_lru+0x16/0x80 [ 102.130564][T14893] migrate_device_finalize+0x9b/0x530 [ 102.131640][T14893] dmirror_migrate_to_device.constprop.0+0x7c5/0xad0 [ 102.133047][T14893] dmirror_fops_unlocked_ioctl+0x89b/0xc80 Likely, nothing else goes wrong: putting the last folio reference will remove the folio from the LRU again. So besides memcg complaining, adding the folio to be freed to the LRU is just an unnecessary step. The new flow resembles what we have in migrate_folio_move(): add the dst to the lru, rem ---truncated---

A use-after-free vulnerability was found in the cyttsp4_core driver in the Linux kernel. This issue occurs in the device cleanup routine due to a possible rearming of the watchdog_timer from the workqueue. This could allow a local user to crash the system, causing a denial of service.

A use-after-free vulnerability was found in the siano smsusb module in the Linux kernel. The bug occurs during device initialization when the siano device is plugged in. This flaw allows a local user to crash the system, causing a denial of service condition.

A use-after-free vulnerability was found in the cxgb4 driver in the Linux kernel. The bug occurs when the cxgb4 device is detaching due to a possible rearming of the flower_stats_timer from the work queue. This flaw allows a local user to crash the system, causing a denial of service condition.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix management of listener transports Currently, when no active threads are running, a root user using nfsdctl command can try to remove a particular listener from the list of previously added ones, then start the server by increasing the number of threads, it leads to the following problem: [ 158.835354] refcount_t: addition on 0; use-after-free. [ 158.835603] WARNING: CPU: 2 PID: 9145 at lib/refcount.c:25 refcount_warn_saturate+0x160/0x1a0 [ 158.836017] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd auth_rpcgss nfs_acl lockd grace overlay isofs uinput snd_seq_dummy snd_hrtimer nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables qrtr sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common snd_hda_codec_generic mc e1000e snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore sg loop dm_multipath dm_mod nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs libcrc32c crct10dif_ce ghash_ce vmwgfx sha2_ce sha256_arm64 sr_mod sha1_ce cdrom nvme drm_client_lib drm_ttm_helper ttm nvme_core drm_kms_helper nvme_auth drm fuse [ 158.840093] CPU: 2 UID: 0 PID: 9145 Comm: nfsd Kdump: loaded Tainted: G B W 6.13.0-rc6+ #7 [ 158.840624] Tainted: [B]=BAD_PAGE, [W]=WARN [ 158.840802] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024 [ 158.841220] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 158.841563] pc : refcount_warn_saturate+0x160/0x1a0 [ 158.841780] lr : refcount_warn_saturate+0x160/0x1a0 [ 158.842000] sp : ffff800089be7d80 [ 158.842147] x29: ffff800089be7d80 x28: ffff00008e68c148 x27: ffff00008e68c148 [ 158.842492] x26: ffff0002e3b5c000 x25: ffff600011cd1829 x24: ffff00008653c010 [ 158.842832] x23: ffff00008653c000 x22: 1fffe00011cd1829 x21: ffff00008653c028 [ 158.843175] x20: 0000000000000002 x19: ffff00008653c010 x18: 0000000000000000 [ 158.843505] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 158.843836] x14: 0000000000000000 x13: 0000000000000001 x12: ffff600050a26493 [ 158.844143] x11: 1fffe00050a26492 x10: ffff600050a26492 x9 : dfff800000000000 [ 158.844475] x8 : 00009fffaf5d9b6e x7 : ffff000285132493 x6 : 0000000000000001 [ 158.844823] x5 : ffff000285132490 x4 : ffff600050a26493 x3 : ffff8000805e72bc [ 158.845174] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000098588000 [ 158.845528] Call trace: [ 158.845658] refcount_warn_saturate+0x160/0x1a0 (P) [ 158.845894] svc_recv+0x58c/0x680 [sunrpc] [ 158.846183] nfsd+0x1fc/0x348 [nfsd] [ 158.846390] kthread+0x274/0x2f8 [ 158.846546] ret_from_fork+0x10/0x20 [ 158.846714] ---[ end trace 0000000000000000 ]--- nfsd_nl_listener_set_doit() would manipulate the list of transports of server's sv_permsocks and close the specified listener but the other list of transports (server's sp_xprts list) would not be changed leading to the problem above. Instead, determined if the nfsdctl is trying to remove a listener, in which case, delete all the existing listener transports and re-create all-but-the-removed ones.

In FreeBSD 12.1-STABLE before r364644, 11.4-STABLE before r364651, 12.1-RELEASE before p9, 11.4-RELEASE before p3, and 11.3-RELEASE before p13, improper handling in the kernel causes a use-after-free bug by sending large user messages from multiple threads on the same SCTP socket. The use-after-free situation may result in unintended kernel behaviour including a kernel panic.

In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test() Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_de ---truncated---

Use after free in some Intel(R) Graphics Driver before version 27.20.100.8336, 15.45.33.5164, and 15.40.47.5166 may allow an authenticated user to potentially enable denial of service via local access.

hw/9pfs/cofile.c and hw/9pfs/9p.c in QEMU can modify an fid path while it is being accessed by a second thread, leading to (for example) a use-after-free outcome.

A vulnerability was found in the Linux kernel, where accessing a deallocated instance in printer_ioctl() printer_ioctl() tries to access of a printer_dev instance. However, use-after-free arises because it had been freed by gprinter_free().

The __do_follow_link function in fs/namei.c in the Linux kernel before 2.6.33 does not properly handle the last pathname component during use of certain filesystems, which allows local users to cause a denial of service (incorrect free operations and system crash) via an open system call.

Subsequent use of the CBO listener may result in further memory corruption due to use after free issue. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in MDM9205, QCS404, SDX55, SM6150, SM7150, SM8150, SXR2130

A vulnerability was found in GPAC 2.5-DEV-rev228-g11067ea92-master. It has been declared as problematic. This vulnerability affects the function xmt_node_end of the file src/scene_manager/loader_xmt.c of the component MP4Box. The manipulation leads to use after free. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The name of the patch is f4b3e4d2f91bc1749e7a924a8ab171af03a355a8/c1b9c794bad8f262c56f3cf690567980d96662f5. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-268792.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix NULL ptr deref in crypto_aead_setkey() Neither SMB3.0 or SMB3.02 supports encryption negotiate context, so when SMB2_GLOBAL_CAP_ENCRYPTION flag is set in the negotiate response, the client uses AES-128-CCM as the default cipher. See MS-SMB2 3.3.5.4. Commit b0abcd65ec54 ("smb: client: fix UAF in async decryption") added a @server->cipher_type check to conditionally call smb3_crypto_aead_allocate(), but that check would always be false as @server->cipher_type is unset for SMB3.02. Fix the following KASAN splat by setting @server->cipher_type for SMB3.02 as well. mount.cifs //srv/share /mnt -o vers=3.02,seal,... BUG: KASAN: null-ptr-deref in crypto_aead_setkey+0x2c/0x130 Read of size 8 at addr 0000000000000020 by task mount.cifs/1095 CPU: 1 UID: 0 PID: 1095 Comm: mount.cifs Not tainted 6.12.0 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? crypto_aead_setkey+0x2c/0x130 kasan_report+0xda/0x110 ? crypto_aead_setkey+0x2c/0x130 crypto_aead_setkey+0x2c/0x130 crypt_message+0x258/0xec0 [cifs] ? __asan_memset+0x23/0x50 ? __pfx_crypt_message+0x10/0x10 [cifs] ? mark_lock+0xb0/0x6a0 ? hlock_class+0x32/0xb0 ? mark_lock+0xb0/0x6a0 smb3_init_transform_rq+0x352/0x3f0 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 smb_send_rqst+0x144/0x230 [cifs] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] ? hlock_class+0x32/0xb0 ? smb2_setup_request+0x225/0x3a0 [cifs] ? __pfx_cifs_compound_last_callback+0x10/0x10 [cifs] compound_send_recv+0x59b/0x1140 [cifs] ? __pfx_compound_send_recv+0x10/0x10 [cifs] ? __create_object+0x5e/0x90 ? hlock_class+0x32/0xb0 ? do_raw_spin_unlock+0x9a/0xf0 cifs_send_recv+0x23/0x30 [cifs] SMB2_tcon+0x3ec/0xb30 [cifs] ? __pfx_SMB2_tcon+0x10/0x10 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 ? __pfx_lock_release+0x10/0x10 ? do_raw_spin_trylock+0xc6/0x120 ? lock_acquire+0x3f/0x90 ? _get_xid+0x16/0xd0 [cifs] ? __pfx_SMB2_tcon+0x10/0x10 [cifs] ? cifs_get_smb_ses+0xcdd/0x10a0 [cifs] cifs_get_smb_ses+0xcdd/0x10a0 [cifs] ? __pfx_cifs_get_smb_ses+0x10/0x10 [cifs] ? cifs_get_tcp_session+0xaa0/0xca0 [cifs] cifs_mount_get_session+0x8a/0x210 [cifs] dfs_mount_share+0x1b0/0x11d0 [cifs] ? __pfx___lock_acquire+0x10/0x10 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? lock_release+0x203/0x5d0 cifs_mount+0xb3/0x3d0 [cifs] ? do_raw_spin_trylock+0xc6/0x120 ? __pfx_cifs_mount+0x10/0x10 [cifs] ? lock_acquire+0x3f/0x90 ? find_nls+0x16/0xa0 ? smb3_update_mnt_flags+0x372/0x3b0 [cifs] cifs_smb3_do_mount+0x1e2/0xc80 [cifs] ? __pfx_vfs_parse_fs_string+0x10/0x10 ? __pfx_cifs_smb3_do_mount+0x10/0x10 [cifs] smb3_get_tree+0x1bf/0x330 [cifs] vfs_get_tree+0x4a/0x160 path_mount+0x3c1/0xfb0 ? kasan_quarantine_put+0xc7/0x1d0 ? __pfx_path_mount+0x10/0x10 ? kmem_cache_free+0x118/0x3e0 ? user_path_at+0x74/0xa0 __x64_sys_mount+0x1a6/0x1e0 ? __pfx___x64_sys_mount+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Free tzp copy along with the thermal zone The object pointed to by tz->tzp may still be accessed after being freed in thermal_zone_device_unregister(), so move the freeing of it to the point after the removal completion has been completed at which it cannot be accessed any more.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Fix possible access to a freed kirqfd instance Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd created and added to the irqfds_list by privcmd_irqfd_assign() may get removed by another thread executing privcmd_irqfd_deassign(), while the former is still using it after dropping the locks. This can lead to a situation where an already freed kirqfd instance may be accessed and cause kernel oops. Use SRCU locking to prevent the same, as is done for the KVM implementation for irqfds.

In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS.