wolfSSL 4.0.0 has a Buffer Overflow in DoPreSharedKeys in tls13.c when a current identity size is greater than a client identity size. An attacker sends a crafted hello client packet over the network to a TLSv1.3 wolfSSL server. The length fields of the packet: record length, client hello length, total extensions length, PSK extension length, total identity length, and identity length contain their maximum value which is 2^16. The identity data field of the PSK extension of the packet contains the attack data, to be stored in the undefined memory (RAM) of the server. The size of the data is about 65 kB. Possibly the attacker can perform a remote code execution attack.
Multiple stack-based buffer overflows in the __dn_expand function in network/dn_expand.c in musl libc 1.1x before 1.1.2 and 0.9.13 through 1.0.3 allow remote attackers to (1) have unspecified impact via an invalid name length in a DNS response or (2) cause a denial of service (crash) via an invalid name length in a DNS response, related to an infinite loop with no output.
A vulnerability classified as critical has been found in Tenda i9 1.0.0.9(4122). This affects the function formSetCfm of the file /goform/setcfm of the component httpd. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252261 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the ipqos_lanip_editlist interface at /goform/aspForm.
A heap-based buffer overflow vulnerability exists in the PSD read_icc_icCurve_data functionality of Accusoft ImageGear 19.9. A specially crafted malformed file can lead to an integer overflow that, in turn, leads to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.
A memory corruption vulnerability exists in the XML-parsing ParseAttribs functionality of AT&T Labs’ Xmill 0.7. A specially crafted XML file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.
Heap-based buffer overflow in PCRE 8.34 through 8.37 and PCRE2 10.10 allows remote attackers to execute arbitrary code via a crafted regular expression, as demonstrated by /^(?P=B)((?P=B)(?J:(?P<B>c)(?P<B>a(?P=B)))>WGXCREDITS)/, a different vulnerability than CVE-2015-8384.
Industrial Control Systems Network Protocol Parsers (ICSNPP) - Ethercat Zeek Plugin versions d78dda6 and prior are vulnerable to out-of-bounds write in their primary analyses function for Ethercat communication packets. This could allow an attacker to cause arbitrary code execution.
Fuji Electric V-Server 4.0.3.0 and prior, A heap-based buffer overflow vulnerability has been identified, which may allow remote code execution.
A heap-based buffer overflow vulnerability exists in the XML Decompression LabelDict::Load functionality of AT&T Labs’ Xmill 0.7. A specially crafted XMI file can lead to remote code execution. An attacker can provide a malicious file to trigger this vulnerability.
Increasing the resolution of video frames, while performing a multi-threaded encode, can result in a heap overflow in av1_loop_restoration_dealloc().
Industrial Control Systems Network Protocol Parsers (ICSNPP) - Ethercat Zeek Plugin versions d78dda6 and prior are vulnerable to out-of-bounds write while analyzing specific Ethercat datagrams. This could allow an attacker to cause arbitrary code execution.
In attp_build_value_cmd of att_protocol.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
cJSON before 1.7.11 allows out-of-bounds access, related to multiline comments.
Stack-based Buffer Overflow in GitHub repository gpac/gpac prior to 2.3-DEV.
Triangle MicroWorks DNP3 Outstation LibrariesDNP3 Outstation .NET Protocol components and DNP3 Outstation ANSI C source code libraries are affected:3.16.00 through 3.25.01. A specially crafted message may cause a stack-based buffer overflow. Authentication is not required to exploit this vulnerability.
Buffer overflow in CPCA PCFAX number process of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*:Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS MF750C Series/Color imageCLASS X MF1333C firmware v03.07 and earlier sold in US. i-SENSYS MF754Cdw/C1333iF firmware v03.07 and earlier sold in Europe.
Possible heap overflow due to improper length check of domain while parsing the DNS response in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Voice & Music, Snapdragon Wearables
Possible buffer underflow due to lack of check for negative indices values when processing user provided input in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Voice & Music, Snapdragon Wearables
A vulnerability classified as critical was found in Totolink X2000R_V2 2.0.0-B20230727.10434. This vulnerability affects the function formTmultiAP of the file /bin/boa. The manipulation leads to buffer overflow. VDB-249742 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
InduSoft Web Studio versions prior to 8.1 SP2, and InTouch Edge HMI (formerly InTouch Machine Edition) versions prior to 2017 SP2. A remote attacker could send a carefully crafted packet to exploit a stack-based buffer overflow vulnerability during tag, alarm, or event related actions such as read and write, with potential for code to be executed. If InduSoft Web Studio remote communication security was not enabled, or a password was left blank, a remote user could send a carefully crafted packet to invoke an arbitrary process, with potential for code to be executed. The code would be executed under the privileges of the InduSoft Web Studio or InTouch Edge HMI runtime and could lead to a compromise of the InduSoft Web Studio or InTouch Edge HMI server machine.
Copying RTCP messages into the output buffer without checking the destination buffer size which could lead to a remote stack overflow. in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, QCM2150, QCS605, QM215, Rennell, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130
A heap-based buffer overflow exists in stbi__bmp_load_cont in stb_image.h in catimg 2.4.0.
A vulnerability was found in MicroPython up to 1.21.0. It has been classified as critical. Affected is the function slice_indices of the file objslice.c. The manipulation leads to heap-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.22.0 is able to address this issue. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-249180.
In versions of FreeBSD 12.4-RELEASE prior to 12.4-RELEASE-p7 and FreeBSD 13.2-RELEASE prior to 13.2-RELEASE-p5 the __sflush() stdio function in libc does not correctly update FILE objects' write space members for write-buffered streams when the write(2) system call returns an error. Depending on the nature of an application that calls libc's stdio functions and the presence of errors returned from the write(2) system call (or an overridden stdio write routine) a heap buffer overflow may occur. Such overflows may lead to data corruption or the execution of arbitrary code at the privilege level of the calling program.
OMRON CX-Programmer 9.78 and prior is vulnerable to an Out-of-Bounds Write, which may allow an attacker to execute arbitrary code.
A stack-based buffer overflow in Forcepoint Email Security version 8.5 allows an attacker to craft malicious input and potentially crash a process creating a denial-of-service. While no known Remote Code Execution (RCE) vulnerabilities exist, as with all buffer overflows, the possibility of RCE cannot be completely ruled out. Data Execution Protection (DEP) is already enabled on the Email appliance as a risk mitigation.
Buffer overflow in the Address Book username process in authentication of Mobile Device Function of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*: Satera LBP670C Series/Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS LBP674C/Color imageCLASS X LBP1333C/Color imageCLASS MF750C Series/Color imageCLASS X MF1333C Series firmware v03.07 and earlier sold in US. i-SENSYS LBP673Cdw/C1333P/i-SENSYS MF750C Series/C1333i Series firmware v03.07 and earlier sold in Europe.
H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the EditSTList interface at /goform/aspForm.
can: out of bounds in remove_rx_filter function
Buffer overflow in the Address Book password process in authentication of Mobile Device Function of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*: Satera LBP670C Series/Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS LBP674C/Color imageCLASS X LBP1333C/Color imageCLASS MF750C Series/Color imageCLASS X MF1333C Series firmware v03.07 and earlier sold in US. i-SENSYS LBP673Cdw/C1333P/i-SENSYS MF750C Series/C1333i Series firmware v03.07 and earlier sold in Europe.
A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
Buffer overflow in SLP attribute request process of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*: Satera LBP670C Series/Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS LBP674C/Color imageCLASS X LBP1333C/Color imageCLASS MF750C Series/Color imageCLASS X MF1333C Series firmware v03.07 and earlier sold in US. i-SENSYS LBP673Cdw/C1333P/i-SENSYS MF750C Series/C1333i Series firmware v03.07 and earlier sold in Europe.
Buffer overflow in CPCA PDL Resource Download process of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*: Satera LBP670C Series/Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS LBP674C/Color imageCLASS X LBP1333C/Color imageCLASS MF750C Series/Color imageCLASS X MF1333C Series firmware v03.07 and earlier sold in US. i-SENSYS LBP673Cdw/C1333P/i-SENSYS MF750C Series/C1333i Series firmware v03.07 and earlier sold in Europe.
An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap/message.c has a stack-based buffer overflow for a FETCH response with a long INTERNALDATE field.
An issue was discovered in NeoMutt before 2018-07-16. nntp_add_group in newsrc.c has a stack-based buffer overflow because of incorrect sscanf usage.
Advantech WebAccess 8.3.1 and earlier has several stack-based buffer overflow vulnerabilities that have been identified, which may allow an attacker to execute arbitrary code.
Buffer overflow in WSD probe request process of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*: Satera LBP670C Series/Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS LBP674C/Color imageCLASS X LBP1333C/Color imageCLASS MF750C Series/Color imageCLASS X MF1333C Series firmware v03.07 and earlier sold in US. i-SENSYS LBP673Cdw/C1333P/i-SENSYS MF750C Series/C1333i Series firmware v03.07 and earlier sold in Europe.
An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap_quote_string in imap/util.c does not leave room for quote characters, leading to a stack-based buffer overflow.
A vulnerability was found in Tenda AC20 16.03.08.12. This vulnerability affects the function save_virtualser_data of the file /goform/formSetVirtualSer. The manipulation of the argument list leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the EditvsList parameter at /dotrace.asp.
RIOT RIOT-OS version after commit 7af03ab624db0412c727eed9ab7630a5282e2fd3 contains a Buffer Overflow vulnerability in sock_dns, an implementation of the DNS protocol utilizing the RIOT sock API that can result in Remote code executing. This attack appears to be exploitable via network connectivity.
An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap/message.c has a stack-based buffer overflow for a FETCH response with a long RFC822.SIZE field.
Fuji Electric V-Server 4.0.3.0 and prior, A stack-based buffer overflow vulnerability has been identified, which may allow remote code execution.
A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client. An attacker who successfully exploited the vulnerability could run arbitrary code on the client machine. To exploit the vulnerability, an attacker could send specially crafted DHCP responses to a client. The security update addresses the vulnerability by correcting how Windows DHCP clients handle certain DHCP responses.
Gnome Pango 1.42 and later is affected by: Buffer Overflow. The impact is: The heap based buffer overflow can be used to get code execution. The component is: function name: pango_log2vis_get_embedding_levels, assignment of nchars and the loop condition. The attack vector is: Bug can be used when application pass invalid utf-8 strings to functions like pango_itemize.
H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the DelDNSHnList interface at /goform/aspForm.
Heap-based buffer overflow vulnerability in Mitsubishi Electric FA Engineering Software (CPU Module Logging Configuration Tool versions 1.112R and prior, CW Configurator versions 1.011M and prior, Data Transfer versions 3.44W and prior, EZSocket versions 5.4 and prior, FR Configurator all versions, FR Configurator SW3 all versions, FR Configurator2 versions 1.24A and prior, GT Designer3 Version1(GOT1000) versions 1.250L and prior, GT Designer3 Version1(GOT2000) versions 1.250L and prior, GT SoftGOT1000 Version3 versions 3.245F and prior, GT SoftGOT2000 Version1 versions 1.250L and prior, GX Configurator-DP versions 7.14Q and prior, GX Configurator-QP all versions, GX Developer versions 8.506C and prior, GX Explorer all versions, GX IEC Developer all versions, GX LogViewer versions 1.115U and prior, GX RemoteService-I all versions, GX Works2 versions 1.597X and prior, GX Works3 versions 1.070Y and prior, iQ Monozukuri ANDON (Data Transfer) versions 1.003D and prior, iQ Monozukuri Process Remote Monitoring (Data Transfer) versions 1.002C and prior, M_CommDTM-HART all versions, M_CommDTM-IO-Link versions 1.03D and prior, MELFA-Works versions 4.4 and prior, MELSEC WinCPU Setting Utility all versions, MELSOFT EM Software Development Kit (EM Configurator) versions 1.015R and prior, MELSOFT Navigator versions 2.74C and prior, MH11 SettingTool Version2 versions 2.004E and prior, MI Configurator versions 1.004E and prior, MT Works2 versions 1.167Z and prior, MX Component versions 5.001B and prior, Network Interface Board CC IE Control utility versions 1.29F and prior, Network Interface Board CC IE Field Utility versions 1.16S and prior, Network Interface Board CC-Link Ver.2 Utility versions 1.23Z and prior, Network Interface Board MNETH utility versions 34L and prior, PX Developer versions 1.53F and prior, RT ToolBox2 versions 3.73B and prior, RT ToolBox3 versions 1.82L and prior, Setting/monitoring tools for the C Controller module (SW4PVC-CCPU) versions 4.12N and prior, and SLMP Data Collector versions 1.04E and prior) allows a remote unauthenticated attacker to cause a DoS condition on the software products, and possibly to execute a malicious code on the personal computer running the software products although it has not been reproduced, by spoofing MELSEC, GOT or FREQROL and returning crafted reply packets.
Stack overflow in paddle.searchsorted in PaddlePaddle before 2.6.0. This flaw can lead to a denial of service, or even more damage.
A stack-based buffer overflow vulnerability in Opto 22 PAC Control Basic and PAC Control Professional versions R10.0a and prior may allow remote code execution.