A vulnerability classified as critical has been found in TOTOLINK EX1800T 9.1.0cu.2112_B20220316. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the ViewLog.asp page and can be exploited through the remote_host parameter.

An OS command injection vulnerability in the /stream-to-vlc Express route in hitarth-gg Zenshin before 2.7.0 allows remote attackers to execute arbitrary commands via the url parameter.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_admin_apis.php. When parsing the line parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9721.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

Certain NETGEAR devices are affected by command execution. This affects M4200-10MG-POE+ 12.0.2.11 and earlier, M4300-28G 12.0.2.11 and earlier, M4300-52G 12.0.2.11 and earlier, M4300-28G-POE+ 12.0.2.11 and earlier, M4300-52G-POE+ 12.0.2.11 and earlier, M4300-8X8F 12.0.2.11 and earlier, M4300-12X12F 12.0.2.11 and earlier, M4300-24X24F 12.0.2.11 and earlier, M4300-24X 12.0.2.11 and earlier, and M4300-48X 12.0.2.11 and earlier.

NextcloudPi is a ready to use image for Virtual Machines, Raspberry Pi, Odroid HC1, Rock64 and other boards. A command injection vulnerability in NextCloudPi allows command execution as the root user via the NextCloudPi web-panel. Due to a security misconfiguration this can be used by anyone with access to NextCloudPi web-panel, no authentication is required. It is recommended that the NextCloudPi is upgraded to 1.53.1.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

Web::Passwd versions through 0.03 for Perl is vulnerable to RCE. Web::Passwd is a small CGI application for managing htpasswd files using the htpasswd command. The user parameter is not validated or escaped, and is used as the last argument on the command line, allowing for command injection.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-el7-0.9.8.891. Authentication is not required to exploit this vulnerability. The specific flaw exists within loader_ajax.php. When parsing the line parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9259.

cgi-bin/drknow.cgi in Innotube ITGuard-Manager 0.0.0.1 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the username field, as demonstrated by a username beginning with "admin|" to use the '|' metacharacter.

LG N1A1 NAS 3718.510 is affected by: Remote Command Execution. The impact is: execute arbitrary code (remote). The attack vector is: HTTP POST with parameters.

Liferay Portal 6.2.5 allows Command=FileUpload&Type=File&CurrentFolder=/ requests when frmfolders.html exists. NOTE: The vendor disputes this issue because the exploit reference link only shows frmfolders.html is accessible and does not demonstrate how an unauthorized user can upload a file.

OS Command Injection vulnerability in allenhwkim proctree through 0.1.1 and commit 0ac10ae575459457838f14e21d5996f2fa5c7593 for Node.js, allows attackers to execute arbitrary commands via the fix function.

China Mobile An Lianbao WF-1 router v1.0.1 is affected by an OS command injection vulnerability in the web interface /api/ZRUsb/pop_usb_device component.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with an automatic subscription.

A flaw was found in the REST API in StarWind Stack. REST command, which manipulates a virtual disk, doesn’t check input parameters. Some of them go directly to bash as part of a script. An attacker with non-root user access can inject arbitrary data into the command that will be executed with root privileges. This affects StarWind SAN and NAS v0.2 build 1633.

WebdriverIO is a test automation framework for unit, e2e and component testing using WebDriver, WebDriver BiDi and Appium. Versions below 9.24.0 contain a command injection vulnerability leading to remote code execution (RCE) in test orchestration. Git permits branch names containing shell metacharacters, and getGitMetadataForAISelection() interpolates these names directly into execSync() calls without sanitization. An attacker can exploit this by supplying a malicious repository (via testOrchestrationOptions.runSmartSelection.source, or the current directory if unset) whose branch name carries a payload, causing the shell to execute arbitrary code. This enables remote code execution on CI/CD servers and developer machines, leading to credential and secret disclosure, source code and SSH key exfiltration, system compromise, and supply chain attacks via tampered build artifacts. The issue has been fixed in version 9.24.0.

An attacker could leverage an API to pass along a malicious file that could then manipulate the process creation command line in MDT AutoSave versions prior to v6.02.06 and run a command line argument. This could then be leveraged to run a malicious process.

OS Command Injection vulnerability in es128 ssl-utils 1.0.0 for Node.js allows attackers to execute arbitrary commands via unsanitized shell metacharacters provided to the createCertRequest() and the createCert() functions.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

OS command injection vulnerability in Turistforeningen node-s3-uploader through 2.0.3 for Node.js allows attackers to execute arbitrary commands via the metadata() function.

SGE-PLC1000 device, in its 0.9.2b firmware version, does not handle some requests correctly, allowing a remote attacker to inject code into the operating system with maximum privileges.

Zoho ManageEngine ADSelfService Plus through 6102 allows unauthenticated remote code execution in non-English editions.

In the MMM::Agent::Helpers::Network::clear_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for FreeBSD), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

In the MMM::Agent::Helpers::Network::send_arp function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Solaris), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

The DHCP client on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allows unauthenticated remote code execution as root because /etc/services/INET/inet_ipv4.php mishandles shell metacharacters, affecting generated files such as WAN-1-udhcpc.sh.

The QSAN SANOS setting page does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340 provided by Y'S corporation. An attacker who can access the affected product may execute an arbitrary OS command.

Quectel EG25-G devices through 202006130814 allow executing arbitrary code remotely by using an AT command to place shell metacharacters in quectel_handle_fumo_cfg input in atfwd_daemon.

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Linux), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

mySCADA myPRO does not properly neutralize POST requests sent to a specific port with version information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system.

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for FreeBSD), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

mySCADA myPRO does not properly neutralize POST requests sent to a specific port with email information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system.

Bitwarden CLI 2026.4.0 from 2026-04-22T21:57Z to 2026-04-22T23:30Z, when obtained from npm, had embedded malicious code. This is related to a Checkmarx supply chain incident.

The restricted shell provided by Akkadian Provisioning Manager Engine (PME) can be bypassed by switching the OpenSSH channel from `shell` to `exec` and providing the ssh client a single execution parameter. This issue was resolved in Akkadian OVA appliance version 3.0 (and later), Akkadian Provisioning Manager 5.0.2 (and later), and Akkadian Appliance Manager 3.3.0.314-4a349e0 (and later).

In the MMM::Agent::Helpers::Network::add_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Solaris), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

A vulnerability, which was classified as critical, was found in LB-LINK AC1900 Router 1.0.2. Affected is the function websGetVar of the file /goform/set_manpwd. The manipulation of the argument routepwd  leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

reg-keygen-git-hash-plugin is a reg-suit plugin to detect the snapshot key to be compare with using Git commit hash. reg-keygen-git-hash-plugin through and including 0.10.15 allow remote attackers to execute of arbitrary commands. Upgrade to version 0.10.16 or later to resolve this issue.

QsanTorture in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

GL.iNET MT3000 4.1.0 Release 2 is vulnerable to OS Command Injection via /usr/lib/oui-httpd/rpc/logread.

In the MMM::Agent::Helpers::Network::clear_ip function in MySQL Multi-Master Replication Manager (MMM) mmm_agentd 2.2.1 (for Linux), a specially crafted MMM protocol message can cause a shell command injection resulting in arbitrary command execution with the privileges of the mmm\_agentd process. An attacker that can initiate a TCP session with mmm\_agentd can trigger this vulnerability.

A vulnerability classified as critical was found in hzmanyun Education and Training System 3.1.1. Affected by this vulnerability is the function pdf2swf of the file /pdf2swf. The manipulation of the argument file leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

The async-git package before 1.13.2 for Node.js allows OS Command Injection via shell metacharacters, as demonstrated by git.reset and git.tag.

OS command injection vulnerability in Init function in QSAN XEVO allows remote attackers to execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

QuickInstall in QSAN Storage Manager does not filter special parameters properly that allows remote unauthenticated attackers to inject and execute arbitrary commands. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

QSAN SANOS factory reset function does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.