The API endpoints in Ironman PowerShell Universal 3.0.0 through 4.2.0 allow remote attackers to execute arbitrary commands via crafted HTTP requests if a param block is used, due to invalid sanitization of input strings. The fixed versions are 3.10.2, 4.1.10, and 4.2.1.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

Command Injection in Jfinal CMS v4.7.1 and earlier allows remote attackers to execute arbitrary code by uploading a malicious HTML template file via the component 'jfinal_cms/admin/filemanager/list'.

An improper neutralization of special elements used in a command ('Command Injection') vulnerability [CWE-77] in FortiPortal version 7.2.0, version 7.0.6 and below may allow a remote authenticated attacker with at least R/W permission to execute unauthorized commands via specifically crafted arguments in the Schedule System Backup page field.

Mingyu Security Gateway before v3.0-5.3p was discovered to contain a remote command execution (RCE) vulnerability via the log_type parameter at /log/fw_security.mds.

An issue was discovered in Relyum RELY-PCIe 22.2.1 and RELY-REC 23.1.0 devices, allowing authenticated command injection through the web interface.

includes/configure_client.php in RaspAP 2.6.6 allows attackers to execute commands via command injection.

An OS command injection vulnerability has been reported to affect Photo Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Photo Station 6.4.2 ( 2023/12/15 ) and later

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

China Mobile An Lianbao WF-1 V1.0.1 router provides a web interface /api/ZRMesh/set_ZRMesh which receives parameters by POST request, and the parameter mesh_enable and mesh_device have a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

The Symantec Messaging Gateway before 10.6.3-267 can encounter an issue of remote code execution, which describes a situation whereby an individual may obtain the ability to execute commands remotely on a target machine or in a target process. In this type of occurrence, after gaining access to the system, the attacker may attempt to elevate their privileges.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access, via dtb pages of the platform portal. This is also known as OSFOURK-23719.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

In IBOS 4.5.4 Open, the database backup has Command Injection Vulnerability.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.1, 4000 Assistant V10 R0, 4000 Manager V10 R1 before V10 R1.42.1, and 4000 Manager V10 R0 allow Authenticated Command Injection via AShbr. This is also known as OSFOURK-24039.

An issue in ZenTao Community Edition v.18.6 and before, ZenTao Biz v.8.6 and before, ZenTao Max v.4.7 and before allows an attacker to execute arbitrary code via a crafted script to the Office Conversion Settings function.

Atos Unify OpenScape 4000 Platform V10 R1 before Hotfix V10 R1.42.2 and 4000 and Manager Platform V10 R1 before Hotfix V10 R1.42.2 allow command injection by an authenticated attacker into the platform operating system, leading to administrative access via the webservice. This is also known as OSFOURK-24120.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device. 

ZPE Systems, Inc Nodegrid OS v5.0.0 to v5.0.17, v5.2.0 to v5.2.19, v5.4.0 to v5.4.16, v5.6.0 to v5.6.13, v5.8.0 to v5.8.10, and v5.10.0 to v5.10.3 was discovered to contain a command injection vulnerability via the endpoint /v1/system/toolkit/files/.

A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. User-controlled configuration of the underlying parsers used by GitHub Pages were not sufficiently restricted and made it possible to execute commands on the GitHub Enterprise Server instance. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 2.22 and was fixed in 2.21.6, 2.20.15, and 2.19.21. The underlying issues contributing to this vulnerability were identified both internally and through the GitHub Security Bug Bounty program.

A command injection on the /admin/broadcast.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary PHP code on the server as the user running the application.

Command injection in homemng.htm in Juplink RX4-1500 versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows remote authenticated attackers to execute commands via specially crafted requests to the vulnerable endpoint.

Mattermost versions 10.4.x <= 10.4.2, 10.3.x <= 10.3.3, 9.11.x <= 9.11.8 fail to restrict command execution in archived channels, which allows authenticated users to run commands in archived channels.

PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an authenticated attacker to run arbitrary commands with the phonesystem user privileges because of "<space><space> followed by <shift><enter>" mishandling.

Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.

An issue was discovered in Atos Unify OpenScape Voice Trace Manager V8 before V8 R0.9.11. It allows authenticated command injection via ftp.

In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.

A code injection vulnerability exists in the Ambari Alert Definition feature, allowing authenticated users to inject and execute arbitrary shell commands. The vulnerability arises when defining alert scripts, where the script filename field is executed using `sh -c`. An attacker with authenticated access can exploit this vulnerability to inject malicious commands, leading to remote code execution on the server. The issue has been fixed in the latest versions of Ambari.

An issue in NETIS SYSTEMS WF2409E v.3.6.42541 allows a remote attacker to execute arbitrary code via the ping and traceroute functions of the diagnostic tools component in the admin management interface.

A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field.

CasaOS is an open-source personal cloud system. Prior to version 0.4.4, if an authenticated user using CasaOS is able to successfully connect to a controlled SMB server, they are able to execute arbitrary commands. Version 0.4.4 contains a patch for the issue.

Azure Identity SDK Remote Code Execution Vulnerability

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to authenticated command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/device_Form?script/.

Azure Identity SDK Remote Code Execution Vulnerability

1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payload to achieve command injection when adding container repositories. The vulnerability has been fixed in v1.3.6.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-23556.

Netgear D6220 with Firmware Version 1.0.0.80, D8500 with Firmware Version 1.0.3.60, R6700 with Firmware Version 1.0.2.26, and R6900 with Firmware Version 1.0.2.26 are vulnerable to Command Injection. If an attacker gains web management privileges, they can inject commands into the post request parameters, gaining shell privileges.

EDIMAX BR-6288ACL v1.12 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the pppUserName parameter.

There is a command injection vulnerability in the Tenda G103 Gigabit GPON Terminal with firmware version V1.0.0.5. If an attacker gains web management privileges, they can inject commands gaining shell privileges.

IBM Storage Scale 5.2.2.0 and 5.2.2.1, under certain configurations, could allow an authenticated user to execute privileged commands due to improper input neutralization.

LuaTeX before 1.17.0 allows execution of arbitrary shell commands when compiling a TeX file obtained from an untrusted source. This occurs because luatex-core.lua lets the original io.popen be accessed. This also affects TeX Live before 2023 r66984 and MiKTeX before 23.5.

Azure DevOps Server Remote Code Execution Vulnerability

MXsecurity version 1.0 is vulnearble to command injection vulnerability. This vulnerability has been reported in the SSH CLI program, which can be exploited by attackers who have gained authorization privileges. The attackers can break out of the restricted shell and subsequently execute arbitrary code.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the tomography_ping_number parameter.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the smartqos_priority_devices parameter.

** UNSUPPORTED WHEN ASSIGNED ** The Apache Spark UI offers the possibility to enable ACLs via the configuration option spark.acls.enable. With an authentication filter, this checks whether a user has access permissions to view or modify the application. If ACLs are enabled, a code path in HttpSecurityFilter can allow someone to perform impersonation by providing an arbitrary user name. A malicious user might then be able to reach a permission check function that will ultimately build a Unix shell command based on their input, and execute it. This will result in arbitrary shell command execution as the user Spark is currently running as. This issue was disclosed earlier as CVE-2022-33891, but incorrectly claimed version 3.1.3 (which has since gone EOL) would not be affected. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Users are recommended to upgrade to a supported version of Apache Spark, such as version 3.4.0.

AutoGPT versions 0.3.4 and earlier are vulnerable to a Server-Side Template Injection (SSTI) that could lead to Remote Code Execution (RCE). The vulnerability arises from the improper handling of user-supplied format strings in the `AgentOutputBlock` implementation, where malicious input is passed to the Jinja2 templating engine without adequate security measures. Attackers can exploit this flaw to execute arbitrary commands on the host system. The issue is fixed in version 0.4.0.

Motorola CX2L Router 1.0.1 was discovered to contain a command injection vulnerability via the system_time_timezone parameter.