In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: skip expectations in other netns via proc Skip expectations that do not reside in this netns. Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's conntrack entries via proc").

In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD __build_packet_message() manually constructs the NFULA_PAYLOAD netlink attribute using skb_put() and skb_copy_bits(), bypassing the standard nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes are allocated (including NLA alignment padding), only data_len bytes of actual packet data are copied. The trailing nla_padlen(data_len) bytes (1-3 when data_len is not 4-byte aligned) are never initialized, leaking stale heap contents to userspace via the NFLOG netlink socket. Replace the manual attribute construction with nla_reserve(), which handles the tailroom check, header setup, and padding zeroing via __nla_reserve(). The subsequent skb_copy_bits() fills in the payload data on top of the properly initialized attribute.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: handle invalid dinode in ocfs2_group_extend [BUG] kernel BUG at fs/ocfs2/resize.c:308! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308 Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1fe Call Trace: ... ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... [CAUSE] ocfs2_group_extend() assumes that the global bitmap inode block returned from ocfs2_inode_lock() has already been validated and BUG_ONs when the signature is not a dinode. That assumption is too strong for crafted filesystems because the JBD2-managed buffer path can bypass structural validation and return an invalid dinode to the resize ioctl. [FIX] Validate the dinode explicitly in ocfs2_group_extend(). If the global bitmap buffer does not contain a valid dinode, report filesystem corruption with ocfs2_error() and fail the resize operation instead of crashing the kernel.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_eem: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase.

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was missing from both probe unwind and remove-time cleanup. Add a devm cleanup action after successful registration so nand_ecc_unregister_on_host_hw_engine() runs automatically on probe failures and during device removal.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix circular locking dependency in nci_close_device nci_close_device() flushes rx_wq and tx_wq while holding req_lock. This causes a circular locking dependency because nci_rx_work() running on rx_wq can end up taking req_lock too: nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete -> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target -> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock) Move the flush of rx_wq after req_lock has been released. This should safe (I think) because NCI_UP has already been cleared and the transport is closed, so the work will see it and return -ENETDOWN. NIPA has been hitting this running the nci selftest with a debug kernel on roughly 4% of the runs.

In the Linux kernel, the following vulnerability has been resolved: gpib: lpvo_usb: fix memory leak on disconnect The driver iterates over the registered USB interfaces during GPIB attach and takes a reference to their USB devices until a match is found. These references are never released which leads to a memory leak when devices are disconnected. Fix the leak by dropping the unnecessary references.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators When a process crashes and the kernel writes a core dump to a 9P filesystem, __kernel_write() creates an ITER_KVEC iterator. This iterator reaches netfs_limit_iter() via netfs_unbuffered_write(), which only handles ITER_FOLIOQ, ITER_BVEC and ITER_XARRAY iterator types, hitting the BUG() for any other type. Fix this by adding netfs_limit_kvec() following the same pattern as netfs_limit_bvec(), since both kvec and bvec are simple segment arrays with pointer and length fields. Dispatch it from netfs_limit_iter() when the iterator type is ITER_KVEC.

In the Linux kernel, the following vulnerability has been resolved: counter: rz-mtu3-cnt: prevent counter from being toggled multiple times Runtime PM counter is incremented / decremented each time the sysfs enable file is written to. If user writes 0 to the sysfs enable file multiple times, runtime PM usage count underflows, generating the following message. rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow! At the same time, hardware registers end up being accessed with clocks off in rz_mtu3_terminate_counter() to disable an already disabled channel. If user writes 1 to the sysfs enable file multiple times, runtime PM usage count will be incremented each time, requiring the same number of 0 writes to get it back to 0. If user writes 0 to the sysfs enable file while PWM is in progress, PWM is stopped without counter being the owner of the underlying MTU3 channel. Check against the cached count_is_enabled value and exit if the user is trying to set the same enable value.

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix NULL pointer dereference in ep_queue When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready.

In the Linux kernel, the following vulnerability has been resolved: bridge: mrp: reject zero test interval to avoid OOM panic br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied interval value from netlink without validation. When interval is 0, usecs_to_jiffies(0) yields 0, causing the delayed work (br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule itself with zero delay. This creates a tight loop on system_percpu_wq that allocates and transmits MRP test frames at maximum rate, exhausting all system memory and causing a kernel panic via OOM deadlock. The same zero-interval issue applies to br_mrp_start_in_test_parse() for interconnect test frames. Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both IFLA_BRIDGE_MRP_START_TEST_INTERVAL and IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the netlink attribute parsing layer before the value ever reaches the workqueue scheduling code. This is consistent with how other bridge subsystems (br_fdb, br_mst) enforce range constraints on netlink attributes.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Unlink NV12 planes earlier unlink_nv12_plane() will clobber parts of the plane state potentially already set up by plane_atomic_check(), so we must make sure not to call the two in the wrong order. The problem happens when a plane previously selected as a Y plane is now configured as a normal plane by user space. plane_atomic_check() will first compute the proper plane state based on the userspace request, and unlink_nv12_plane() later clears some of the state. This used to work on account of unlink_nv12_plane() skipping the state clearing based on the plane visibility. But I removed that check, thinking it was an impossible situation. Now when that situation happens unlink_nv12_plane() will just WARN and proceed to clobber the state. Rather than reverting to the old way of doing things, I think it's more clear if we unlink the NV12 planes before we even compute the new plane state. (cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc)

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix dir separator in SMB1 UNIX mounts When calling cifs_mount_get_tcon() with SMB1 UNIX mounts, @cifs_sb->mnt_cifs_flags needs to be read or updated only after calling reset_cifs_unix_caps(), otherwise it might end up with missing CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits. This fixes the wrong dir separator used in paths caused by the missing CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix NULL pointer deref in eth_get_drvinfo Commit ec35c1969650 ("usb: gadget: f_ncm: Fix net_device lifecycle with device_move") reparents the gadget device to /sys/devices/virtual during unbind, clearing the gadget pointer. If the userspace tool queries on the surviving interface during this detached window, this leads to a NULL pointer dereference. Unable to handle kernel NULL pointer dereference Call trace: eth_get_drvinfo+0x50/0x90 ethtool_get_drvinfo+0x5c/0x1f0 __dev_ethtool+0xaec/0x1fe0 dev_ethtool+0x134/0x2e0 dev_ioctl+0x338/0x560 Add a NULL check for dev->gadget in eth_get_drvinfo(). When detached, skip copying the fw_version and bus_info strings, which is natively handled by ethtool_get_drvinfo for empty strings.

In the Linux kernel, the following vulnerability has been resolved: smb: server: make use of smbdirect_socket.send_io.bcredits It turns out that our code will corrupt the stream of reassabled data transfer messages when we trigger an immendiate (empty) send. In order to fix this we'll have a single 'batch' credit per connection. And code getting that credit is free to use as much messages until remaining_length reaches 0, then the batch credit it given back and the next logical send can happen.

In the Linux kernel, the following vulnerability has been resolved: rtnetlink: add missing netlink_ns_capable() check for peer netns rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer network namespace when creating paired devices (veth, vxcan, netkit). This allows an unprivileged user with a user namespace to create interfaces in arbitrary network namespaces, including init_net. Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer namespace before allowing device creation to proceed.

In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations ieee80211_chan_bw_change() iterates all stations and accesses link->reserved.oper via sta->sdata->link[link_id]. For stations on AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to the VLAN sdata, whose link never participates in chanctx reservations. This leaves link->reserved.oper zero-initialized with chan == NULL, causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw() when accessing chandef->chan->band during CSA. Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata() before accessing link data. [also change sta->sdata in ARRAY_SIZE even if it doesn't matter]

In the Linux kernel before 6.1.2, kernel/module/decompress.c misinterprets the module_get_next_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: tls: stop recv() if initial process_rx_list gave us non-DATA If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix incorrect free_irq() variable The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq().

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: fix divide-by-zero in rtsc_min() m2sm() converts a u32 slope to a u64 scaled value. For large inputs (e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores the difference of two such u64 values in a u32 variable `dsm` and uses it as a divisor. When the difference is exactly 2^32 the truncation yields zero, causing a divide-by-zero oops in the concave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...] Widen `dsm` to u64 and replace do_div() with div64_u64() so the full difference is preserved.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del().

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: don't call cdev_init while cdev in use When calling unbind, then bind again, cdev_init reinitialized the cdev, even though there may still be references to it. That's the case when the /dev/hidg* device is still opened. This obviously unsafe behavior like oopes. This fixes this by using cdev_alloc to put the cdev on the heap. That way, we can simply allocate a new one in hidg_bind.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix leaking event log memory During the device remove process, the device is reset, causing the configuration registers to go back to their default state, which is zero. As the driver is checking if the event log support was enabled before deallocating, it will fail if a reset happened before. Do not check if the support was enabled, the check for 'idxd->evl' being valid (only allocated if the HW capability is available) is enough.

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: prevent unlimited numbers of rfkill events from being created Userspace can create an unlimited number of rfkill events if the system is so configured, while not consuming them from the rfkill file descriptor, causing a potential out of memory situation. Prevent this from bounding the number of pending rfkill events at a "large" number (i.e. 1000) to prevent abuses like this.

In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: drop logically empty buckets in mtype_del mtype_del() counts empty slots below n->pos in k, but it only drops the bucket when both n->pos and k are zero. This misses buckets whose live entries have all been removed while n->pos still points past deleted slots. Treat a bucket as empty when all positions below n->pos are unused and release it directly instead of shrinking it further.

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner packet 'newskb' that is being reassembled. First a zero-copy approach is tried if it succeeds then newskb becomes non-linear. When a subsequent fragment in the same datagram does not meet the fast-path conditions, a memory copy is performed. It calls skb_put() to append the data and as newskb is non-linear it triggers SKB_LINEAR_ASSERT check. Oops: invalid opcode: 0000 [#1] SMP NOPTI [...] RIP: 0010:skb_put+0x3c/0x40 [...] Call Trace: <IRQ> iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs] iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs] iptfs_input+0x122/0x3e0 [xfrm_iptfs] xfrm_input+0x91e/0x1a50 xfrm4_esp_rcv+0x3a/0x110 ip_protocol_deliver_rcu+0x1d7/0x1f0 ip_local_deliver_finish+0xbe/0x1e0 __netif_receive_skb_core.constprop.0+0xb56/0x1120 __netif_receive_skb_list_core+0x133/0x2b0 netif_receive_skb_list_internal+0x1ff/0x3f0 napi_complete_done+0x81/0x220 virtnet_poll+0x9d6/0x116e [virtio_net] __napi_poll.constprop.0+0x2b/0x270 net_rx_action+0x162/0x360 handle_softirqs+0xdc/0x510 __irq_exit_rcu+0xe7/0x110 irq_exit_rcu+0xe/0x20 common_interrupt+0x85/0xa0 </IRQ> <TASK> Fix this by checking if the skb is non-linear. If it is, linearize it by calling skb_linearize(). As the initial allocation of newskb originally reserved enough tailroom for the entire reassembled packet we do not need to check if we have enough tailroom or extend it.

In the Linux kernel, the following vulnerability has been resolved: net: sched: act_csum: validate nested VLAN headers tcf_csum_act() walks nested VLAN headers directly from skb->data when an skb still carries in-payload VLAN tags. The current code reads vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without first ensuring that the full VLAN header is present in the linear area. If only part of an inner VLAN header is linearized, accessing h_vlan_encapsulated_proto reads past the linear area, and the following skb_pull(VLAN_HLEN) may violate skb invariants. Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and pulling each nested VLAN header. If the header still is not fully available, drop the packet through the existing error path.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: clamp SCO altsetting table indices btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[].

In the Linux kernel, the following vulnerability has been resolved: esp: fix skb leak with espintcp and async crypto When the TX queue for espintcp is full, esp_output_tail_tcp will return an error and not free the skb, because with synchronous crypto, the common xfrm output code will drop the packet for us. With async crypto (esp_output_done), we need to drop the skb when esp_output_tail_tcp returns an error.

In the Linux kernel, the following vulnerability has been resolved: i2c: cp2615: fix serial string NULL-deref at probe The cp2615 driver uses the USB device serial string as the i2c adapter name but does not make sure that the string exists. Verify that the device has a serial number before accessing it to avoid triggering a NULL-pointer dereference (e.g. with malicious devices).

In the Linux kernel, the following vulnerability has been resolved: xfrm: clear trailing padding in build_polexpire() build_expire() clears the trailing padding bytes of struct xfrm_user_expire after setting the hard field via memset_after(), but the analogous function build_polexpire() does not do this for struct xfrm_user_polexpire. The padding bytes after the __u8 hard field are left uninitialized from the heap allocation, and are then sent to userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners, leaking kernel heap memory contents. Add the missing memset_after() call, matching build_expire().

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: validate inner IPv4 header length in IPTFS payload Add validation of the inner IPv4 packet tot_len and ihl fields parsed from decrypted IPTFS payloads in __input_process_payload(). A crafted ESP packet containing an inner IPv4 header with tot_len=0 causes an infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the data offset never advances and the while(data < tail) loop never terminates, spinning forever in softirq context. Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct iphdr), which catches both the tot_len=0 case and malformed ihl values. The normal IP stack performs this validation in ip_rcv_core(), but IPTFS extracts and processes inner packets before they reach that layer.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION Use sb->s_uuid for a proper volume identifier as the primary choice. For filesystems that do not provide a UUID, fall back to stfs.f_fsid obtained from vfs_statfs().

In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix memory leak in __mmap_region() commit 605f6586ecf7 ("mm/vma: do not leak memory when .mmap_prepare swaps the file") handled the success path by skipping get_file() via file_doesnt_need_get, but missed the error path. When /dev/zero is mmap'd with MAP_SHARED, mmap_zero_prepare() calls shmem_zero_setup_desc() which allocates a new shmem file to back the mapping. If __mmap_new_vma() subsequently fails, this replacement file is never fput()'d - the original is released by ksys_mmap_pgoff(), but nobody releases the new one. Add fput() for the swapped file in the error path. Reproducible with fault injection. FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 2 UID: 0 PID: 366 Comm: syz.7.14 Not tainted 7.0.0-rc6 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x164/0x1f0 should_fail_ex+0x525/0x650 should_failslab+0xdf/0x140 kmem_cache_alloc_noprof+0x78/0x630 vm_area_alloc+0x24/0x160 __mmap_region+0xf6b/0x2660 mmap_region+0x2eb/0x3a0 do_mmap+0xc79/0x1240 vm_mmap_pgoff+0x252/0x4c0 ksys_mmap_pgoff+0xf8/0x120 __x64_sys_mmap+0x12a/0x190 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) BUG: memory leak unreferenced object 0xffff8881118aca80 (size 360): comm "syz.7.14", pid 366, jiffies 4294913255 hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 28 4d ae ff ff ff ff .........(M..... backtrace (crc db0f53bc): kmem_cache_alloc_noprof+0x3ab/0x630 alloc_empty_file+0x5a/0x1e0 alloc_file_pseudo+0x135/0x220 __shmem_file_setup+0x274/0x420 shmem_zero_setup_desc+0x9c/0x170 mmap_zero_prepare+0x123/0x140 __mmap_region+0xdda/0x2660 mmap_region+0x2eb/0x3a0 do_mmap+0xc79/0x1240 vm_mmap_pgoff+0x252/0x4c0 ksys_mmap_pgoff+0xf8/0x120 __x64_sys_mmap+0x12a/0x190 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by syzkaller.

In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so that the device is initialized and thus the release function pointer is properly set before it can be used. This was found by Claude while reviewing another EDAC patch.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree.

In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline]

In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list.

In the Linux kernel, the following vulnerability has been resolved: tracing: Drain deferred trigger frees if kthread creation fails Boot-time trigger registration can fail before the trigger-data cleanup kthread exists. Deferring those frees until late init is fine, but the post-boot fallback must still drain the deferred list if kthread creation never succeeds. Otherwise, boot-deferred nodes can accumulate on trigger_data_free_list, later frees fall back to synchronously freeing only the current object, and the older queued entries are leaked forever. To trigger this, add the following to the kernel command line: trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon The second traceon trigger will fail and be freed. This triggers a NULL pointer dereference and crashes the kernel. Keep the deferred boot-time behavior, but when kthread creation fails, drain the whole queued list synchronously. Do the same in the late-init drain path so queued entries are not stranded there either.

In the Linux kernel, the following vulnerability has been resolved: wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit wg_netns_pre_exit() manually acquires rtnl_lock() inside the pernet .pre_exit callback. This causes a hung task when another thread holds rtnl_mutex - the cleanup_net workqueue (or the setup_net failure rollback path) blocks indefinitely in wg_netns_pre_exit() waiting to acquire the lock. Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net: Add ->exit_rtnl() hook to struct pernet_operations."), where the framework already holds RTNL and batches all callbacks under a single rtnl_lock()/rtnl_unlock() pair, eliminating the contention window. The rcu_assign_pointer(wg->creating_net, NULL) is safe to move from .pre_exit to .exit_rtnl (which runs after synchronize_rcu()) because all RCU readers of creating_net either use maybe_get_net() - which returns NULL for a dying namespace with zero refcount - or access net->user_ns which remains valid throughout the entire ops_undo_list sequence. [ Jason: added __net_exit and __read_mostly annotations that were missing. ]

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Fix base address calculation in kvm_eiointc_regs_access() In function kvm_eiointc_regs_access(), the register base address is caculated from array base address plus offset, the offset is absolute value from the base address. The data type of array base address is u64, it should be converted into the "void *" type and then plus the offset.

In the Linux kernel, the following vulnerability has been resolved: mm: move page table sync declarations to linux/pgtable.h During our internal testing, we started observing intermittent boot failures when the machine uses 4-level paging and has a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It turns out that the kernel panics while initializing vmemmap (struct page array) when the vmemmap region spans two PGD entries, because the new PGD entry is only installed in init_mm.pgd, but not in the page tables of other tasks. And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap); In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c synchronizes the top level page table (See commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so that all tasks in the system can see the new vmemmap area. However, when vmemmap_can_optimize() returns true, the optimized path skips synchronization of top-level page tables. This is because vmemmap_populate_compound_pages() is implemented in core MM code, which does not handle synchronization of the top-level page tables. Instead, the core MM has historically relied on each architecture to perform this synchronization manually. We're not the first party to encounter a crash caused by not-sync'd top level page tables: earlier this year, Gwan-gyeong Mun attempted to address the issue [1] [2] after hitting a kernel panic when x86 code accessed the vmemmap area before the corresponding top-level entries were synced. At that time, the issue was believed to be triggered only when struct page was enlarged for debugging purposes, and the patch did not get further updates. It turns out that current approach of relying on each arch to handle the page table sync manually is fragile because 1) it's easy to forget to sync the top level page table, and 2) it's also easy to overlook that the kernel should not access the vmemmap and direct mapping areas before the sync. # The solution: Make page table sync more code robust and harder to miss To address this, Dave Hansen suggested [3] [4] introducing {pgd,p4d}_populate_kernel() for updating kernel portion of the page tables and allow each architecture to explicitly perform synchronization when installing top-level entries. With this approach, we no longer need to worry about missing the sync step, reducing the risk of future regressions. The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK, PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by vmalloc and ioremap to synchronize page tables. pgd_populate_kernel() looks like this: static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d) { pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr); } It is worth noting that vmalloc() and apply_to_range() carefully synchronizes page tables by calling p*d_alloc_track() and arch_sync_kernel_mappings(), and thus they are not affected by ---truncated---

In the Linux kernel, the following vulnerability has been resolved: spi: spi-dw-dma: fix print error log when wait finish transaction If an error occurs, the device may not have a current message. In this case, the system will crash. In this case, it's better to use dev from the struct ctlr (struct spi_controller*).

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: account for netlink header size This is a followup to an old bug fix: NLMSG_DONE needs to account for the netlink header size, not just the attribute size. This can result in a WARN splat + drop of the netlink message, but other than this there are no ill effects.