An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in the management interface of FortiTester 3.0.0 through 7.2.3 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

KioWare for Windows through v8.33 was discovered to contain an incomplete blacklist filter for blocked dialog boxes on Windows 10. This issue can allow attackers to open a file dialog box via the function showDirectoryPicker() which can then be used to open an unprivileged command prompt.

A vulnerability was found in KylinSoft kylin-software-properties on KylinOS. It has been rated as critical. This issue affects the function setMainSource. The manipulation leads to os command injection. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. Upgrading to version 0.0.1-130 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-230687. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the fosexec command of Brocade Fabric OS after Brocade Fabric OS v9.1.0 and, before Brocade Fabric OS v9.1.1 could allow a local authenticated user to perform privilege escalation to root by breaking the rbash shell. Starting with Fabric OS v9.1.0, “root” account access is disabled.

A command injection in the networking service of the MIB3 infotainment allows an attacker already presenting in the system to escalate privileges and obtain administrative access to the system. The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources.

IBM AIX 7.1, 7.2, 7.3, and VIOS 3.1 could allow a non-privileged local user to exploit a vulnerability in the invscout command to execute arbitrary commands. IBM X-Force ID: 251207.

A vulnerability classified as critical was found in KylinSoft youker-assistant on KylinOS. Affected by this vulnerability is the function adjust_cpufreq_scaling_governer. The manipulation leads to os command injection. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.4.13 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-226099.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in FortiADC CLI 7.1.0, 7.0.0 through 7.0.3, 6.2.0 through 6.2.4, 6.1 all versions, 6.0 all versions may allow a local and authenticated attacker to execute unauthorized commands via specifically crafted arguments in diagnose system df CLI command.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in FortiADC 7.2.0, 7.1.0 through 7.1.1 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

AppUse 4.0 allows shell command injection via a proxy field.

All versions of the package keep-module-latest are vulnerable to Command Injection due to missing input sanitization or other checks and sandboxes being employed to the installModule function. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

All versions of the package n158 are vulnerable to Command Injection due to improper input sanitization in the 'module.exports' function. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

Multiple improper neutralization of special elements used in an os command ('OS Command Injection') vulnerabilties [CWE-78] vulnerability in Fortinet allows a local authenticated attacker to execute arbitrary shell code as `root` user via crafted CLI requests.

A CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability exists that allows a local privilege escalation on the appliance when a maliciously crafted Operating System command is entered on the device. Affected products: StruxureWare Data Center Expert (V7.9.2 and prior)

Multiple vulnerabilities in the restricted shell of Cisco Evolved Programmable Network Manager (EPNM), Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to escape the restricted shell and gain root privileges on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.

A vulnerability, which was classified as critical, was found in kylin-system-updater up to 1.4.20kord on Ubuntu Kylin. Affected is the function InstallSnap of the component Update Handler. The manipulation leads to command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-222600.

An improper neutralization of special elements used in an OS Command vulnerability in FortiAP's console 6.4.1 through 6.4.5 and 6.2.4 through 6.2.5 may allow an authenticated attacker to execute unauthorized commands by running the kdbg CLI command with specifically crafted arguments.

All versions of the package bwm-ng are vulnerable to Command Injection due to improper input sanitization in the 'check' function in the bwm-ng.js file. **Note:** To execute the code snippet and potentially exploit the vulnerability, the attacker needs to have the ability to run Node.js code within the target environment. This typically requires some level of access to the system or application hosting the Node.js environment.

Phicomm K2G v22.6.3.20 was discovered to contain a command injection vulnerability via the autoUpTime parameter in the automatic upgrade function.

Phicomm K2 v22.6.534.263 was discovered to contain a command injection vulnerability via the autoUpTime parameter in the automatic upgrade function.

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.1.0.10, LTS2024 release Versions 7.13.1.0 through 7.13.1.25, LTS 2023 release versions 7.10.1.0 through 7.10.1.50, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the DDSH CLI. A low privileged attacker with local access could potentially exploit this vulnerability to execute arbitrary commands with root privileges.

close_altfile in filename.c in less before 606 omits shell_quote calls for LESSCLOSE.

OS Command injection vulnerability in sleuthkit fls tool 4.11.1 allows attackers to execute arbitrary commands via a crafted value to the m parameter. NOTE: third parties have disputed this because there is no analysis showing that the backtick command executes outside the context of the user account that entered the command line.

An improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78 ] in FortiManager 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions, FortiAnalyzer 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions and FortiADC  7.1.0, 7.0.0 through 7.0.3, 6.2 all versions, 6.1 all versions, 6.0 all versions management interface may allow an authenticated attacker with at least READ permissions on system settings to execute arbitrary commands on the underlying shell due to an unsafe usage of the wordexp function.

Dell VxRail versions earlier than 7.0.450, contain(s) an OS command injection vulnerability in VxRail Manager. A local authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

DrayTek Vigor2960 v1.5.1.4 allows an authenticated attacker with network access to the web management interface to inject operating system commands via the mainfunction.cgi 'parameter' parameter. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution and Elevation of privileges.

IBM Spectrum Scale 5.1.0.1 through 5.1.4.1 could allow a local attacker to execute arbitrary commands in the container. IBM X-Force ID: 239437.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 7.0.0 through 7.0.3, FortiADC version 7.1.0 through 7.1.1, FortiADC version 7.0.0 through 7.0.3, FortiADC 6.2 all versions, FortiADC 6.1 all versions, FortiADC 6.0 all versions, FortiADC 5.4 all versions, FortiADC 5.3 all versions, FortiADC 5.2 all versions, FortiADC 5.1 all versions allows attacker to execute unauthorized code or commands via specifically crafted arguments to existing commands.

Tenda AC1200 Router Model W15Ev2 V15.11.0.10(1576) was discovered to contain a command injection vulnerability via the PortMappingServer parameter in the setPortMapping function.

Tenda AC1200 Router Model W15Ev2 V15.11.0.10(1576) was discovered to contain multiple command injection vulnerabilities in the function setIPsecTunnelList via the IPsecLocalNet and IPsecRemoteNet parameters.

Tenda AC1200 Router Model W15Ev2 V15.11.0.10(1576) was discovered to contain a command injection vulnerability via the dmzHost parameter in the setDMZ function.

Snyk CLI before 1.996.0 allows arbitrary command execution, affecting Snyk IDE plugins and the snyk npm package. Exploitation could follow from the common practice of viewing untrusted files in the Visual Studio Code editor, for example. The original demonstration was with shell metacharacters in the vendor.json ignore field, affecting snyk-go-plugin before 1.19.1. This affects, for example, the Snyk TeamCity plugin (which does not update automatically) before 20220930.142957.

In Tenda AC1200 Router model W15Ev2 V15.11.0.10(1576), there exists a command injection vulnerability in the function formSetFixTools. This vulnerability allows attackers to run arbitrary commands on the server via the hostname parameter.

An improper neutralization of special elements used in an OS command vulnerability [CWE-78] in FortiADC 5.x all versions, 6.0 all versions, 6.1 all versions, 6.2.0 through 6.2.4, 7.0.0 through 7.0.3, 7.1.0; FortiDDoS 4.x all versions, 5.0 all versions, 5.1 all versions, 5.2 all versions, 5.3 all versions, 5.4 all versions, 5.5 all versions, 5.6 all versions and FortiDDoS-F 6.4.0, 6.3.0 through 6.3.3, 6.2.0 through 6.2.2, 6.1.0 through 6.1.4 may allow an authenticated attacker to execute unauthorized commands via specifically crafted arguments to existing commands.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. In version 4.0.0-beta.358 and possibly earlier versions, when creating or updating a "project," it is possible to inject arbitrary shell commands by altering the project name. If a name includes unescaped characters, such as single quotes (`'`), it breaks out of the intended command structure, allowing attackers to execute arbitrary commands on the host system. This vulnerability allows attackers to execute arbitrary commands on the host server, which could result in full system compromise; create, modify, or delete sensitive system files; and escalate privileges depending on the permissions of the executed process. Attackers with access to project management features could exploit this flaw to gain unauthorized control over the host environment. Version 4.0.0-beta.359 fixes this issue.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Apache Airflow Hive Provider, Apache Airflow allows an attacker to execute arbtrary commands in the task execution context, without write access to DAG files. This issue affects Hive Provider versions prior to 4.1.0. It also impacts any Apache Airflow versions prior to 2.3.0 in case HIve Provider is installed (Hive Provider 4.1.0 can only be installed for Airflow 2.3.0+). Note that you need to manually install the HIve Provider version 4.1.0 in order to get rid of the vulnerability on top of Airflow 2.3.0+ version that has lower version of the Hive Provider installed).

TOTOLINK A810R V5.9c.4050_B20190424 was discovered to contain a command injection vulnerability via the component downloadFile.cgi.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a command injection vulnerability via the host_time parameter at the function NTPSyncWithHost.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a command injection vulnerability via the ip parameter at the function setDiagnosisCfg.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a command injection vulnerability via the command parameter at setting/setTracerouteCfg.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a command injection vulnerability via the hostName parameter in the function setOpModeCfg.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the hostName parameter in the function setOpModeCfg.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the FileName parameter in the function UploadFirmwareFile.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the ip parameter in the function setDiagnosisCfg.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the command parameter in the function setTracerouteCfg.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a command injection vulnerability via the host_time parameter in the function NTPSyncWithHost.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a command injection vulnerability via the command parameter in the function setTracerouteCfg.

H3C GR2200 MiniGR1A0V100R014 was discovered to contain a command injection vulnerability via the param parameter at DelL2tpLNSList.