Description: A vulnerability in SiLabs Z/IP Gateway 7.18.01 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formNewSchedule. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in Cypress (formerly Broadcom) WICED Studio 6.2 CYW20735B1 and CYW20819A1. As a Bluetooth Low Energy (BLE) packet is received, it is copied into a Heap (ThreadX Block) buffer. The buffer allocated in dhmulp_getRxBuffer is four bytes too small to hold the maximum of 255 bytes plus headers. It is possible to corrupt a pointer in the linked list holding the free buffers of the g_mm_BLEDeviceToHostPool Block pool. This pointer can be fully controlled by overflowing with 3 bytes of packet data and the first byte of the packet CRC checksum. The checksum can be freely chosen by adapting the packet data accordingly. An attacker might be able to allocate the overwritten address as a receive buffer resulting in a write-what-where condition. This is fixed in BT SDK2.4 and BT SDK2.45.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12029.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 1.01rc001 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the var:menu parameter provided to the webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13270.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of http requests to the web management portal. When parsing the SOAPAction header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16150.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of Login requests to the web management portal. When parsing the HNAP_AUTH header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16139.

RCE/DOS: Linked-list corruption leading to large out-of-bounds write while sorting for forged fragment list in Zephyr. Zephyr versions >= >=2.4.0 contain Out-of-bounds Write (CWE-787). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fj4r-373f-9456

Memory corruption issues in Intel(R) WIFI Drivers before version 21.40 may allow a privileged user to potentially enable escalation of privilege, denial of service, and information disclosure via adjacent access.

D-Link DIR-823G A1V1.0.2B05 was discovered to contain a buffer overflow via the User-Agent parameter. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input, and possibly remote code execution.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_bind.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12303.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected D-Link DIR-2150 4.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the anweb service, which listens on TCP ports 80 and 443 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15727.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of multiple D-Link routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the lighttpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13796.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6400 and R6700 firmware version 1.0.4.98 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the upnpd service, which listens on UDP port 1900 by default. A crafted MX header field in an SSDP message can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11851.

A Stack Based Buffer Overflow vulnerability in tenda AC9 AC9 v.3.0 with firmware version v.15.03.06.42_multi allows a remote attacker to execute arbitrary code via the fromSetIpMacBind function.

An exploitable code execution vulnerability exists in the URL-parsing functionality of the Roav A1 Dashcam running version RoavA1SWV1.9. A specially crafted packet can cause a stack-based buffer overflow, resulting in code execution. An attacker can send a packet to trigger this vulnerability.

rtw_wx_set_scan in drivers/staging/rtl8188eu/os_dep/ioctl_linux.c in the Linux kernel through 5.11.6 allows writing beyond the end of the ->ssid[] array. NOTE: from the perspective of kernel.org releases, CVE IDs are not normally used for drivers/staging/* (unfinished work); however, system integrators may have situations in which a drivers/staging issue is relevant to their own customer base.

A stack-based buffer overflow in dnsproxy in ConnMan before 1.39 could be used by network adjacent attackers to execute code.

A vulnerability has been identified in RUGGEDCOM RM1224 (All versions >= V4.3 and < V6.4), SCALANCE M-800 (All versions >= V4.3 and < V6.4), SCALANCE S615 (All versions >= V4.3 and < V6.4), SCALANCE SC-600 Family (All versions >= V2.0 and < V2.1.3), SCALANCE XB-200 (All versions < V4.1), SCALANCE XC-200 (All versions < V4.1), SCALANCE XF-200BA (All versions < V4.1), SCALANCE XM400 (All versions < V6.2), SCALANCE XP-200 (All versions < V4.1), SCALANCE XR-300WG (All versions < V4.1), SCALANCE XR500 (All versions < V6.2). Affected devices contain a stack-based buffer overflow vulnerability in the handling of STP BPDU frames that could allow a remote attacker to trigger a denial-of-service condition or potentially remote code execution. Successful exploitation requires the passive listening feature of the device to be active.

Wyze Cam v3 Realtek Wi-Fi Driver Heap-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Wyze Cam v3 IP cameras. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Realtek Wi-Fi kernel module. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the kernel. Was ZDI-CAN-22310.

Actiontec WCB6200Q Multipart Boundary Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21416.

Deep Sea Electronics DSE855 Multipart Boundary Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Deep Sea Electronics DSE855 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of multipart boundaries. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23170.

Deep Sea Electronics DSE855 Multipart Value Handling Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Deep Sea Electronics DSE855 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of multipart form variables. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23172.

Sonos Era 100 SMB2 Message Handling Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sonos Era 100 smart speakers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SMB2 messages. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22384.

Heap overflow in subsystem in Intel(R) CSME before versions 11.8.70, 11.11.70, 11.22.70, 12.0.45; Intel(R) TXE before versions 3.1.70 and 4.0.20 may allow an unauthenticated user to potentially enable escalation of privileges, information disclosure or denial of service via adjacent access.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6200 before 1.1.00.24, R6020 before 1.0.0.30, R6080 before 1.0.0.30, R6120 before 1.0.0.36, R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.

Stack overflow vulnerability in the Login function in the HNAP service in D-Link DCS-960L with firmware 1.09 allows attackers to execute of arbitrary code.

Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.stb.mode parameter in the function formGetIptv.

Stack-based buffer overflow vulnerability exists in ELECOM wireless access points. By processing a specially crafted HTTP request, arbitrary code may be executed.

In build_read_multi_rsp of gatt_sr.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Linksys WRT54G v4.21.5 has a stack overflow vulnerability in get_merge_mac function.

In multiple functions of gl_proc.c, there is a buffer overwrite due to a missing bounds check. This could lead to escalation of privileges in the kernel.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiGuestCfg

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via the File parameter in function UploadCustomModule.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid5g in the function setWiFiEasyGuestCfg.

In TdlsexRxFrameHandle of the MTK WLAN driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In HeadsetInterface::ClccResponse of btif_hf.cc, there is a possible out of bounds stack write due to a missing bounds check. This could lead to remote escalation of privilege via Bluetooth, if the recipient has enabled SIP calls with no additional execution privileges needed. User interaction is not needed for exploitation.

In handle_app_cur_val_response of dtif_rc.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the password parameter in the function urldecode.

TOTOLINK NR1800X v9.1.0u.6681_B20230703 was discovered to contain a stack overflow via the password parameter in the function urldecode

TOTOLINK CP900L v4.1.5cu.798_B20221228 was discovered to contain a stack overflow via the password parameter in the function loginAuth

Tenda FH1206 V1.2.0.8(8155)_EN was discovered to contain a stack-based buffer overflow vulnerability via the list1 parameter at ip/goform/DhcpListClient.

TOTOLINK CP450 v4.1.0cu.747_B20191224 was discovered to contain a stack buffer overflow vulnerability in the setStaticDhcpConfig function.

Tenda FH1206 V1.2.0.8(8155)_EN was discovered to contain a stack-based buffer overflow vulnerability via the funcpara1 parameter in ip/goform/setcfm.

Tenda AC18 V15.03.3.10_EN was discovered to contain a stack-based buffer overflow vulnerability via the deviceMac parameter at ip/goform/addWifiMacFilter.

TOTOLINK AC1200 Wireless Router A3002R Firmware V1.1.1-B20200824 is vulnerable to Buffer Overflow. In the boa server program's CGI handling function formWlEncrypt, there is a lack of length restriction on the wlan_ssid field. This oversight leads to potential buffer overflow under specific circumstances. For instance, by invoking the formWlanRedirect function with specific parameters to alter wlan_idx's value and subsequently invoking the formWlEncrypt function, an attacker can trigger buffer overflow, enabling arbitrary command execution or denial of service attacks.