The downloadFlile.cgi binary file in TOTOLINK EX200 V4.0.3c.7646_B20201211 has a command injection vulnerability when receiving GET parameters. The parameter name can be constructed for unauthenticated command execution.

The Screensavercc component in eLux RP before 5.5.0 allows attackers to bypass intended configuration restrictions and execute arbitrary commands with root privileges by inserting commands in a local configuration dialog in the control panel.

A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

All versions of yongyou PLM are affected by a command injection issue. UFIDA PLM (Product Life Cycle Management) is a strategic management method. It applies a series of enterprise application systems to support the entire process from conceptual design to the end of product life, and the collaborative creation, distribution, application and management of product information across organizations. Yonyou PLM uses jboss by default, and you can access the management control background without authorization An attacker can use this vulnerability to gain server permissions.

A flaw has been found in Comfast CF-N1 2.6.0. Affected is the function ntp_timezone of the file /usr/bin/webmgnt. Executing manipulation of the argument timestr can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

Composer is an open source dependency manager for the PHP language. In affected versions windows users running Composer to install untrusted dependencies are subject to command injection and should upgrade their composer version. Other OSs and WSL are not affected. The issue has been resolved in composer versions 1.10.23 and 2.1.9. There are no workarounds for this issue.

A vulnerability was identified in Ruijie WS7204-A 2017.06.15. Affected by this vulnerability is an unknown functionality of the file /itbox_pi/branch_import.php?a=branch_list. Such manipulation of the argument province leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Wavlink WL-NU516U1 M16U1_V240425. This impacts the function sub_4032E4 of the file /cgi-bin/wireless.cgi. This manipulation of the argument Guest_ssid causes command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Telesquare TLR-2005KSH 1.2.4. The affected element is an unknown function of the file /cgi-bin/internet.cgi?Command=lanCfg. Executing manipulation of the argument Hostname can lead to command injection. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

A command-injection vulnerability in the Image Upload function of the NASCENT RemKon Device Manager 4.0.0.0 allows attackers to execute arbitrary commands, as root, via shell metacharacters in the filename parameter to assets/index.php.

Tenda FH451 v1.0.0.9 has a command injection vulnerability in the formexeCommand function i

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK40 before 2.5.1.16, RBR40 before 2.5.1.16, RBS40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, and RBS50Y before 2.6.1.40.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, and R9000 before 1.0.4.26.

A vulnerability was detected in Comfast CF-N1 2.6.0. This impacts the function multi_pppoe of the file /usr/bin/webmgnt. Performing manipulation of the argument phy_interface results in command injection. The attack may be initiated remotely. The exploit is now public and may be used.

An issue was discovered in D-Link DIR816_A1_FW101CNB04 750m11ac wireless router, The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

An issue in DCME-320-L <=9.3.2.114 allows a remote attacker to execute arbitrary code via the log_u_umount.php component.

An issue was discovered in the lettre crate before 0.9.6 for Rust. In an e-mail message body, an attacker can place a . character after two <CR><LF> sequences and then inject arbitrary SMTP commands.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

An issue in Lens Visual integration with Power BI v.4.0.0.3 allows a remote attacker to execute arbitrary code via the Natural language processing component

TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the langType parameter in the login interface.

An OS command injection vulnerability has been reported to affect several product versions. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.3.103 and later

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

A vulnerability, which was classified as critical, was found in LB-LINK AC1900 Router 1.0.2. Affected is the function websGetVar of the file /goform/set_manpwd. The manipulation of the argument routepwd  leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In ProLink PRC2402M V1.0.18 and older, the set_ledonoff function in the adm.cgi binary, accessible with a page parameter value of ledonoff contains a trivial command injection where the value of the led_cmd parameter is passed directly to do_system.

A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument maxRtrAdvInterval leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

A Command injection vulnerability in requestLetsEncryptSsl in NginxProxyManager 2.11.3 allows an attacker to RCE via Add Let's Encrypt Certificate.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setTtyServiceCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument ttyEnable leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setVpnPassCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument pptpPassThru results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

CVE-2024-45824 IMPACT A remote code vulnerability exists in the affected products. The vulnerability occurs when chained with Path Traversal, Command Injection, and XSS Vulnerabilities and allows for full unauthenticated remote code execution. The link in the mitigations section below contains patches to fix this issue.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument merge results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument HTTP leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setNetworkCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument proto results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used.

A vulnerability was found in kalcaddle kodbox up to 1.48. It has been declared as critical. Affected by this vulnerability is the function check of the file plugins/officeViewer/controller/libreOffice/index.class.php. The manipulation of the argument soffice leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.48.04 is able to address this issue. The identifier of the patch is 63a4d5708d210f119c24afd941d01a943e25334c. It is recommended to upgrade the affected component. The identifier VDB-248209 was assigned to this vulnerability.

An attacker could leverage an API to pass along a malicious file that could then manipulate the process creation command line in MDT AutoSave versions prior to v6.02.06 and run a command line argument. This could then be leveraged to run a malicious process.

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

China Mobile An Lianbao WF-1 v1.0.1 router web interface through /api/ZRMacClone/mac_addr_clone receives parameters by POST request, and the parameter macType has a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

Akuvox C315 115.116.2613 allows remote command Injection via the cfgd_server service. The attack vector is sending a payload to port 189 (default root 0.0.0.0).

In vowifi service, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed.

A specially crafted POST request to the ProGauge MAGLINK LX CONSOLE IP sub-menu can allow a remote attacker to inject arbitrary commands.

An issue was discovered in SaltStack Salt before 3002.5. Sending crafted web requests to the Salt API can result in salt.utils.thin.gen_thin() command injection because of different handling of single versus double quotes. This is related to salt/utils/thin.py.

In Config Manager, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege from a proximal attacker with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: A20210009; Issue ID: OSBNB00123234.