Privilege Escalation vulnerability in the command line interface in McAfee Advanced Threat Defense (ATD) 4.x prior to 4.8.2 allows local users to execute arbitrary code via improper access controls on the sudo command.

Privilege Escalation vulnerability in McAfee Active Response (MAR) for Linux prior to 2.4.3 Hotfix 1 allows a malicious script or program to perform functions that the local executing user has not been granted access to.

Privilege escalation vulnerability in McTray.exe in McAfee Endpoint Security (ENS) for Windows Prior to 10.7.0 April 2020 Update allows local users to spawn unrelated processes with elevated privileges via the system administrator granting McTray.exe elevated privileges (by default it runs with the current user's privileges).

Symantec Endpoint Protection Manager (SEPM), prior to 14.2 RU1, may be susceptible to a privilege escalation vulnerability, which is a type of issue whereby an attacker may attempt to compromise the software application to gain elevated access to resources that are normally protected from an application or user.

DeleGate 9.9.13 allows local users to gain privileges as demonstrated by the dgcpnod setuid program.

In Emerson ValveLink v12.0.264 to v13.4.118, a vulnerability in the ValveLink software may allow a local, unprivileged, trusted insider to escalate privileges due to insecure configuration parameters.

Check Point SmartConsole before R80.10 Build 185, R80.20 Build 119, R80.30 before Build 94, R80.40 before Build 415, and R81 before Build 548 were vulnerable to a possible local privilege escalation due to running executables from a directory with write access to all authenticated users.

Improper privilege management in Windows Remote Access Connection Manager allows an authorized attacker to elevate privileges locally.

Incorrect Privilege Assignment vulnerability in Eaton's Intelligent Power Manager (IPM) v1.67 & prior allow non-admin users to upload the system configuration files by sending specially crafted requests. This can result in non-admin users manipulating the system configurations via uploading the configurations with incorrect parameters.

Honeywell INNCOM INNControl 3 allows workstation users to escalate application user privileges through the modification of local configuration files.

MITRE is populating this ID because it was assigned prior to Lenovo becoming a CNA. A local privilege escalation vulnerability was reported (fixed and publicly disclosed in 2015) in Lenovo System Update version 5.07.0008 and prior where the SUService.exe /type COMMAND type could allow a user to execute arbitrary code with elevated privileges.

In multiple locations, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Privilege escalation in jar_signature agent plugin in Checkmk before 2.2.0p18, 2.1.0p38 and 2.0.0p39 allows local user to escalate privileges

Local privilege escalation vulnerability potentially allowed an attacker to misuse ESET’s file operations to delete files without having proper permission.

Privilege escalation vulnerability in SKYSEA Client View Ver.12.200.12n to 15.210.05f allows an attacker to obtain unauthorized privileges and modify/obtain sensitive information or perform unintended operations via unspecified vectors.

Dell PowerEdge Server BIOS and Dell Precision Rack BIOS contain an improper privilege management security vulnerability. An unauthenticated local attacker could potentially exploit this vulnerability, leading to privilege escalation.

A vulnerability classified as critical was found in GE Voluson S8. Affected is the underlying Windows XP operating system. Missing patches might introduce an excessive attack surface. Access to the local network is required for this attack to succeed.

VMware Fusion (11.x before 11.5.2), VMware Remote Console for Mac (11.x and prior before 11.0.1) and Horizon Client for Mac (5.x and prior before 5.4.0) contain a privilege escalation vulnerability due to improper use of setuid binaries. Successful exploitation of this issue may allow attackers with normal user privileges to escalate their privileges to root on the system where Fusion, VMRC or Horizon Client is installed.

In Versa Analytics, the cron jobs are used for scheduling tasks by executing commands at specific dates and times on the server. If the job is run as the user root, there is a potential privilege escalation vulnerability. In this case, the job runs a script as root that is writable by users who are members of the versa group.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by providing crafted options to a specific command. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to a utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient security controls on the CLI. An attacker could exploit this vulnerability by using an affected CLI utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root group on the underlying operating system. The vulnerability is due to incorrect permissions being set when the affected command is executed. An attacker could exploit this vulnerability by executing the affected command on an affected system. A successful exploit could allow the attacker to gain root privileges.

BMC PATROL Agent through 20.08.00 allows local privilege escalation via vectors involving pconfig +RESTART -host.

Due to excessive privileges granted to the web user running the airpointer web platform, a malicious actor that gains control of the this user would be able to privilege escalate to the root user

A flaw was found in the QEMU Guest Agent service for Windows. A local unprivileged user may be able to manipulate the QEMU Guest Agent's Windows installer via repair custom actions to elevate their privileges on the system.

Pritunl Client v1.2.2550.20 contains a local privilege escalation vulnerability in the pritunl-service component. The attack vector is: malicious openvpn config. A local attacker could leverage the log and log-append along with log injection to create or append to privileged script files and execute code as root/SYSTEM.

An issue was discovered in ProlinOS through 2.4.161.8859R. An attacker with local code execution privileges as a normal user (MAINAPP) can escalate to root privileges by exploiting the setuid installation of the xtables-multi binary and leveraging the ip6tables --modprobe switch.

All versions of Windscribe VPN for Mac and Windows <= v2.02.10 contain a local privilege escalation vulnerability in the WindscribeService component. A low privilege user could leverage several openvpn options to execute code as root/SYSTEM.

Exim 4 before 4.94.2 allows Execution with Unnecessary Privileges. Because Exim operates as root in the spool directory (owned by a non-root user), an attacker can write to a /var/spool/exim4/input spool header file, in which a crafted recipient address can indirectly lead to command execution.

An issue was discovered in Xen through 4.14.x. The PCI passthrough code improperly uses register data. Code paths in Xen's MSI handling have been identified that act on unsanitized values read back from device hardware registers. While devices strictly compliant with PCI specifications shouldn't be able to affect these registers, experience shows that it's very common for devices to have out-of-spec "backdoor" operations that can affect the result of these reads. A not fully trusted guest may be able to crash Xen, leading to a Denial of Service (DoS) for the entire system. Privilege escalation and information leaks cannot be excluded. All versions of Xen supporting PCI passthrough are affected. Only x86 systems are vulnerable. Arm systems are not vulnerable. Only guests with passed through PCI devices may be able to leverage the vulnerability. Only systems passing through devices with out-of-spec ("backdoor") functionality can cause issues. Experience shows that such out-of-spec functionality is common; unless you have reason to believe that your device does not have such functionality, it's better to assume that it does.

An issue was discovered in TrouSerS through 0.3.14. If the tcsd daemon is started with root privileges instead of by the tss user, it fails to drop the root gid privilege when no longer needed.

Geist WatchDog Console 3.2.2 uses a weak ACL for the C:\ProgramData\WatchDog Console directory, which allows local users to modify configuration data by updating (1) config.xml or (2) servers.xml.

An improper access control vulnerability in Trend Micro Deep Security 20.0 and Trend Micro Cloud One - Endpoint and Workload Security Agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

Sandbox Accounts for Events provides multiple, temporary AWS accounts to a number of authenticated users simultaneously via a browser-based GUI. Authenticated users could potentially read data from the events table by sending request payloads to the events API, collecting information on planned events, timeframes, budgets and owner email addresses. This data access may allow users to get insights into upcoming events and join events which they have not been invited to. This issue has been patched in version 1.10.0.

An issue was discovered in TrouSerS through 0.3.14. If the tcsd daemon is started with root privileges, the tss user still has read and write access to the /etc/tcsd.conf file (which contains various settings related to this daemon).

Silicon Integrated Systems XGI WindowsXP Display Manager (aka XGI VGA Driver Manager and VGA Display Manager) 6.14.10.1090 allows local users to gain privileges via a crafted 0x96002404 IOCTL call.

Sympa through 6.2.57b.2 allows a local privilege escalation from the sympa user account to full root access by modifying the sympa.conf configuration file (which is owned by sympa) and parsing it through the setuid sympa_newaliases-wrapper executable.

Dell EMC PowerScale OneFS versions 8.1.0 - 9.1.0 contain a privilege escalation vulnerability. A user with ISI_PRIV_JOB_ENGINE may use the PermissionRepair job to grant themselves the highest level of RBAC privileges thus being able to read arbitrary data, tamper with system software or deny service to users.

Emerson DeltaV DCS versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, R5 may allow non-administrative users to change executable and library files on the affected products.

FruityWifi through 2.4 has an unsafe Sudo configuration [(ALL : ALL) NOPASSWD: ALL]. This allows an attacker to perform a system-level (root) local privilege escalation, allowing an attacker to gain complete persistent access to the local system.

An issue in mRemoteNG v1.76.20 allows attackers to escalate privileges via a crafted executable file. NOTE: third parties were unable to reproduce any scenario in which the claimed access of BUILTIN\Users:(M) is present.

The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID.

A local privilege escalation vulnerability was identified within the "luminati_net_updater_win_eagleget_com" service in EagleGet Downloader version 2.1.5.20 Stable. This issue allows authenticated non-administrative user to escalate their privilege and conduct code execution as a SYSTEM privilege.

A vulnerability exists in FlexNet Manager Suite releases 2015 R2 SP3 and earlier (including FlexNet Manager Platform 9.2 and earlier) that affects the inventory gathering components and can be exploited by local users to perform certain actions with elevated privileges on the local system.

An execution with unnecessary privileges vulnerability in the VCM engine of FortiClient for Linux versions 6.2.7 and below, version 6.4.0. may allow local users to elevate their privileges to root by creating a malicious script or program on the target machine.

arch/x86/kernel/entry_64.S in the Linux kernel before 3.17.5 does not properly handle faults associated with the Stack Segment (SS) segment register, which allows local users to gain privileges by triggering an IRET instruction that leads to access to a GS Base address from the wrong space.

An incorrect privilege assignment vulnerability when writing application-specific files in the Palo Alto Networks Global Protect Agent for Linux on ARM platform allows a local authenticated user to gain root privileges on the system. This issue affects Palo Alto Networks Global Protect Agent for Linux 5.0 versions before 5.0.8; 5.1 versions before 5.1.1.

An insecure temporary file vulnerability in Palo Alto Networks Traps allows a local authenticated Windows user to escalate privileges or overwrite system files. This issue affects Palo Alto Networks Traps 5.0 versions before 5.0.8; 6.1 versions before 6.1.4 on Windows. This issue does not affect Cortex XDR 7.0. This issue does not affect Traps for Linux or MacOS.