Four OS command injection vulnerabilities exists in the web interface /action/wirelessConnect functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability focuses on the unsafe use of the `ssid_hex` HTTP parameter to construct an OS Command at offset `0x19afc0` of the `/root/hpgw` binary included in firmware 6.9Z.

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability focuses on the unsafe use of the `WL_DefaultKeyID` in the function located at offset `0x1c7d28` of firmware 6.9Z, and even more specifically on the command execution occuring at offset `0x1c7fac`.

Four OS command injection vulnerabilities exists in the web interface /action/wirelessConnect functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability focuses on the unsafe use of the `key` and `default_key_id` HTTP parameters to construct an OS Command crafted at offset `0x19b1f4` of the `/root/hpgw` binary included in firmware 6.9Z.

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability specifically focuses on the unsafe use of the `WL_SSID` and `WL_SSID_HEX` configuration values in the function at offset `0x1c7d28` of firmware 6.9Z.

In RUCKUS SmartZone (SZ) before 6.1.2p3 Refresh Build, OS command injection can occur via an IP address field provided by an authenticated user.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

GitHub Actions Runner is the application that runs a job from a GitHub Actions workflow. The actions runner invokes the docker cli directly in order to run job containers, service containers, or container actions. A bug in the logic for how the environment is encoded into these docker commands was discovered in versions prior to 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4 that allows an input to escape the environment variable and modify that docker command invocation directly. Jobs that use container actions, job containers, or service containers alongside untrusted user inputs in environment variables may be vulnerable. The Actions Runner has been patched, both on `github.com` and hotfixes for GHES and GHAE customers in versions 2.296.2, 2.293.1, 2.289.4, 2.285.2, and 2.283.4. GHES and GHAE customers may want to patch their instance in order to have their runners automatically upgrade to these new runner versions. As a workaround, users may consider removing any container actions, job containers, or service containers from their jobs until they are able to upgrade their runner versions.

The device has two web servers that expose unauthenticated REST APIs on the management network (TCP ports 8084 and 8086). Exploiting OS command injection through these APIs, an attacker can send arbitrary commands that are executed with administrative permissions by the underlying operating system.

ssh2 is client and server modules written in pure JavaScript for node.js. In ssh2 before version 1.4.0 there is a command injection vulnerability. The issue only exists on Windows. This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. This is fixed in version 1.4.0.

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability focuses on the unsafe use of the `WL_Key` and `WL_DefaultKeyID` configuration values in the function located at offset `0x1c7d28` of firmware 6.9Z , and even more specifically on the command execution occuring at offset `0x1c7f6c`.

A vulnerability in GitLab CE/EE affecting all versions from 11.3.4 prior to 15.1.5, 15.2 to 15.2.3, 15.3 to 15.3 to 15.3.1 allows an an authenticated user to achieve remote code execution via the Import from GitHub API endpoint

The reported vulnerability allows an attacker who has network access to the device to execute code with specially crafted packets in WAGO Series PFC 100 (750-81xx/xxx-xxx), Series PFC 200 (750-82xx/xxx-xxx), Series Wago Touch Panel 600 Standard Line (762-4xxx), Series Wago Touch Panel 600 Advanced Line (762-5xxx), Series Wago Touch Panel 600 Marine Line (762-6xxx) with firmware versions <=FW10.

Multiple vulnerabilities in Cisco Jabber for Windows, Jabber for MacOS, and Jabber for mobile platforms could allow an attacker to execute arbitrary programs on the underlying operating system (OS) with elevated privileges or gain access to sensitive information. For more information about these vulnerabilities, see the Details section of this advisory.

In MITRE Caldera through 4.2.0 and 5.0.0 before 35bc06e, a Remote Code Execution (RCE) vulnerability was found in the dynamic agent (implant) compilation functionality of the server. This allows remote attackers to execute arbitrary code on the server that Caldera is running on via a crafted web request to the Caldera server API used for compiling and downloading of Caldera's Sandcat or Manx agent (implants). This web request can use the gcc -extldflags linker flag with sub-commands.

A vulnerability has been identified in OZW672 (All versions < V8.0), OZW772 (All versions < V8.0). The web service in affected devices does not sanitize the input parameters required for the `exportDiagramPage` endpoint. This could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

A remote command execution vulnerability exists in gogs/gogs versions <=0.12.7 when deployed on a Windows server. The vulnerability arises due to improper validation of the `tree_path` parameter during file uploads. An attacker can set `tree_path=.git.` to upload a file into the .git directory, allowing them to write or rewrite the `.git/config` file. If the `core.sshCommand` is set, this can lead to remote command execution.

A Remote Code Execution (RCE) vulnerability in the WebUI component of the eQ-3 HomeMatic CCU2 firmware up to and including version 2.57.5 and CCU3 firmware up to and including version 3.57.5 allows remote unauthenticated attackers to execute system commands as root via a simple HTTP request.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Honeywell MB-Secure allows Privilege Abuse. This issue affects MB-Secure: from V11.04 before V12.53 and MB-Secure PRO from V01.06 before V03.09.Honeywell also recommends updating to the most recent version of this product.

RaspberryMatic is a free and open-source operating system for running a cloud-free smart-home using the homematicIP / HomeMatic hardware line of IoT devices. A Remote Code Execution (RCE) vulnerability in the file upload facility of the WebUI interface of RaspberryMatic exists. Missing input validation/sanitization in the file upload mechanism allows remote, unauthenticated attackers with network access to the WebUI interface to achieve arbitrary operating system command execution via shell metacharacters in the HTTP query string. Injected commands are executed as root, thus leading to a full compromise of the underlying system and all its components. Versions after `2.31.25.20180428` and prior to `3.63.8.20220330` are affected. Users are advised to update to version `3.63.8.20220330` or newer. There are currently no known workarounds to mitigate the security impact and users are advised to update to the latest version available.

Asciidoctor-include-ext is Asciidoctor’s standard include processor reimplemented as an extension. Versions prior to 0.4.0, when used to render user-supplied input in AsciiDoc markup, may allow an attacker to execute arbitrary system commands on the host operating system. This attack is possible even when `allow-uri-read` is disabled! The problem has been patched in the referenced commits.

An authenticated mySCADA myPRO 8.26.0 user may be able to modify parameters to run commands directly in the operating system.

USVN (aka User-friendly SVN) before 1.0.9 allows remote code execution via shell metacharacters in the number_start or number_end parameter to LastHundredRequest (aka lasthundredrequestAction) in the Timeline module. NOTE: this may overlap CVE-2020-25069.

A critical issue has been discovered in GitLab affecting all versions starting from 14.0 prior to 14.10.5, 15.0 prior to 15.0.4, and 15.1 prior to 15.1.1 where an authenticated user authorized to import projects could import a maliciously crafted project leading to remote code execution.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An OS command injection vulnerability exists in Vinci Protocol Analyzer that could allow an attacker to escalate privileges and perform code execution on affected system.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in ZkTeco-based OEM devices allows OS Command Injection. Since all the found command implementations are executed from the superuser, their impact is the maximum possible. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with the ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly other.

Versions of INEA ME RTU firmware prior to 3.36 are vulnerable to OS command injection, which could allow an attacker to remotely execute arbitrary code.

An OS command injection vulnerability in lib/NSSDropoff.php in ZendTo 5.24-3 through 6.x before 6.10-7 allows unauthenticated remote attackers to execute arbitrary commands via shell metacharacters in the tmp_name parameter when dropping off a file via a POST /dropoff request.

Command Injection in EntoneWebEngine in Amino Communications AK45x series, AK5xx series, AK65x series, Aria6xx series, Aria7/AK7Xx series and Kami7B allows authenticated remote attackers to execute arbitrary commands with root user privileges.

An OS command injection vulnerability exists in the httpd iperfrun.cgi functionality of FreshTomato 2023.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.

Versions of INEA ME RTU firmware 3.36b and prior are vulnerable to operating system (OS) command injection, which could allow remote code execution.

An issue was discovered in Aviatrix Controller before 7.1.4191 and 7.2.x before 7.2.4996. Due to the improper neutralization of special elements used in an OS command, an unauthenticated attacker is able to execute arbitrary code. Shell metacharacters can be sent to /v1/api in cloud_type for list_flightpath_destination_instances, or src_cloud_type for flightpath_connection_test.

IBM Security Guardium 10.6, 11.3, 11.4, and 11.5 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 258824.

Improper Input Validation vulnerability in Progress LoadMaster allows OS Command Injection.This issue affects: * LoadMaster: 7.2.40.0 and above * ECS: All versions * Multi-Tenancy: 7.1.35.4 and above

mySCADA myPRO: Versions 8.20.0 and prior has a feature to send emails, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

mySCADA myPRO: Versions 8.20.0 and prior has a vulnerable debug interface which includes a ping utility, which may allow an attacker to inject arbitrary operating system commands.

GLPI is an open source IT Asset Management, issue tracking system and service desk system. The GLPI addressing plugin in versions < 2.9.1 suffers from authenticated Remote Code Execution vulnerability, allowing access to the server's underlying operating system using command injection abuse of functionality. There is no workaround for this issue and users are advised to upgrade or to disable the addressing plugin.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Four OS command injection vulnerabilities exist in the XCMD testWifiAP functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A XCMD can lead to arbitrary command execution. An attacker can send a sequence of malicious commands to trigger these vulnerabilities.This vulnerability specifically focuses on the unsafe use of the `WL_WPAPSK` configuration value in the function located at offset `0x1c7d28` of firmware 6.9Z.

A trivial sandbox (enabled with the `-dSAFER` option) escape flaw was found in the ghostscript interpreter by injecting a specially crafted pipe command. This flaw allows a specially crafted document to execute arbitrary commands on the system in the context of the ghostscript interpreter. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

A parameter within a command does not properly validate input within myPRO Manager which could be exploited by an unauthenticated remote attacker to inject arbitrary operating system commands.

The postjournal service in Zimbra Collaboration (ZCS) before 8.8.15 Patch 46, 9 before 9.0.0 Patch 41, 10 before 10.0.9, and 10.1 before 10.1.1 sometimes allows unauthenticated users to execute commands.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 6.1.1.0 are subject to a remote code execution vulnerability. System commands can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Attackers need not be authenticated to exploit this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An OS command injection vulnerability exists in the Web Manager Wireless Network Scanner functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the Web Manager Diagnostics: Ping functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

mySCADA myPRO: Versions 8.20.0 and prior has a feature where the API password can be specified, which may allow an attacker to inject arbitrary operating system commands through a specific parameter.

A command execution vulnerability exists in the wifi_country_code_update functionality of the home_security binary of Anker Eufy Homebase 2 2.1.6.9h. A specially-crafted set of network packets can lead to arbitrary command execution.