lestrrat-go/jwx is a Go module implementing various JWx (JWA/JWE/JWK/JWS/JWT, otherwise known as JOSE) technologies. A p2c parameter set too high in JWE's algorithm PBES2-* could lead to a denial of service. The JWE key management algorithms based on PBKDF2 require a JOSE Header Parameter called p2c (PBES2 Count). This parameter dictates the number of PBKDF2 iterations needed to derive a CEK wrapping key. Its primary purpose is to intentionally slow down the key derivation function, making password brute-force and dictionary attacks more resource- intensive. Therefore, if an attacker sets the p2c parameter in JWE to a very large number, it can cause a lot of computational consumption, resulting in a denial of service. This vulnerability has been addressed in commit `64f2a229b` which has been included in release version 1.2.27 and 2.0.18. Users are advised to upgrade. There are no known workarounds for this vulnerability.
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, and 14.1.x versions prior to 14.1.4.6, when BIG-IP packet filters are enabled and a virtual server is configured with the type set to Reject, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
All versions of package express-validators are vulnerable to Regular Expression Denial of Service (ReDoS) when validating specifically-crafted invalid urls.
This affects the package codemirror before 5.58.2; the package org.apache.marmotta.webjars:codemirror before 5.58.2. The vulnerable regular expression is located in https://github.com/codemirror/CodeMirror/blob/cdb228ac736369c685865b122b736cd0d397836c/mode/javascript/javascript.jsL129. The ReDOS vulnerability of the regex is mainly due to the sub-pattern (s|/*.*?*/)*
All versions of package djvalidator are vulnerable to Regular Expression Denial of Service (ReDoS) by sending crafted invalid emails - for example, --@------------------------------------------------------------------------------------------------------------------------!.
Mattermost fails to limit the log size of server logs allowing an attacker sending specially crafted requests to different endpoints to potentially overflow the log.
Dell EMC Isilon OneFS versions 8.2.2 and earlier contain a denial of service vulnerability. SmartConnect had an error condition that may be triggered to loop, using CPU and potentially preventing other SmartConnect DNS responses.
Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.
A vulnerability was found in CodeMirror up to 5.17.0 and classified as problematic. Affected by this issue is some unknown functionality of the file mode/markdown/markdown.js of the component Markdown Mode. The manipulation leads to inefficient regular expression complexity. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Not all code samples mentioned in the GitHub issue can be found. The repository mentions, that "CodeMirror 6 exists, and is [...] much more actively maintained."
On version 16.1.x before 16.1.2, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.5, and all versions of 13.1.x, when the BIG-IP Virtual Edition (VE) uses the ixlv driver (which is used in SR-IOV mode and requires Intel X710/XL710/XXV710 family of network adapters on the Hypervisor) and TCP Segmentation Offload configuration is enabled, undisclosed requests may cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
markdown-it is a Markdown parser. Prior to version 1.3.2, special patterns with length greater than 50 thousand characterss could slow down the parser significantly. Users should upgrade to version 12.3.2 to receive a patch. There are no known workarounds aside from upgrading.
Micronaut is a JVM-based, full stack Java framework designed for building JVM web applications with support for Java, Kotlin and the Groovy language. In affected versions sending an invalid Content Type header leads to memory leak in DefaultArgumentConversionContext as this type is erroneously used in static state. ### Impact Sending an invalid Content Type header leads to memory leak in `DefaultArgumentConversionContext` as this type is erroneously used in static state. ### Patches The problem is patched in Micronaut 3.2.7 and above. ### Workarounds The default content type binder can be replaced in an existing Micronaut application to mitigate the issue: ```java package example; import java.util.List; import io.micronaut.context.annotation.Replaces; import io.micronaut.core.convert.ConversionService; import io.micronaut.http.MediaType; import io.micronaut.http.bind.DefaultRequestBinderRegistry; import io.micronaut.http.bind.binders.RequestArgumentBinder; import jakarta.inject.Singleton; @Singleton @Replaces(DefaultRequestBinderRegistry.class) class FixedRequestBinderRegistry extends DefaultRequestBinderRegistry { public FixedRequestBinderRegistry(ConversionService conversionService, List<RequestArgumentBinder> binders) { super(conversionService, binders); } @Override protected void registerDefaultConverters(ConversionService<?> conversionService) { super.registerDefaultConverters(conversionService); conversionService.addConverter(CharSequence.class, MediaType.class, charSequence -> { try { return MediaType.of(charSequence); } catch (IllegalArgumentException e) { return null; } }); } } ``` ### References Commit that introduced the vulnerability https://github.com/micronaut-projects/micronaut-core/commit/b8ec32c311689667c69ae7d9f9c3b3a8abc96fe3 ### For more information If you have any questions or comments about this advisory: * Open an issue in [Micronaut Core](https://github.com/micronaut-projects/micronaut-core/issues) * Email us at [info@micronaut.io](mailto:info@micronaut.io)
A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticated, adjacent attacker to cause a DoS condition of an affected device. This vulnerability is due to missing length validation of certain Cisco Discovery Protocol packet header fields. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust available memory and cause the service to restart. Cisco has released firmware updates that address this vulnerability.
VMware ESXi and vCenter Server contain a partial denial of service vulnerability in their respective authentication services. VMware has evaluated the severity of this issue to be in the Moderate severity range with a maximum CVSSv3 base score of 5.3.
On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when APM is configured on a virtual server and the associated access profile is configured with APM AAA NTLM Auth, undisclosed requests can cause an increase in internal resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
A vulnerability has been found in MarkText up to 0.17.1 and classified as problematic. Affected by this vulnerability is the function getRecommendTitleFromMarkdownString of the file marktext/src/main/utils/index.js. The manipulation leads to inefficient regular expression complexity. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as problematic was found in Unitech pm2 up to 6.0.6. This vulnerability affects unknown code of the file /lib/tools/Config.js. The manipulation leads to inefficient regular expression complexity. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
oak is a middleware framework for Deno's native HTTP server, Deno Deploy, Node.js 16.5 and later, Cloudflare Workers and Bun. In versions 17.1.5 and below, it's possible to significantly slow down an oak server with specially crafted values of the x-forwarded-proto or x-forwarded-for headers.
The PROFINET (PNIO) stack, when integrated with the Interniche IP stack, improperly handles internal resources for TCP segments where the minimum TCP-Header length is less than defined. This could allow an attacker to create a denial of service condition for TCP services on affected devices by sending specially crafted TCP segments.
Cosign is a sigstore signing tool for OCI containers. Cosign is susceptible to a denial of service by an attacker controlled registry. An attacker who controls a remote registry can return a high number of attestations and/or signatures to Cosign and cause Cosign to enter a long loop resulting in an endless data attack. The root cause is that Cosign loops through all attestations fetched from the remote registry in pkg/cosign.FetchAttestations. The attacker needs to compromise the registry or make a request to a registry they control. When doing so, the attacker must return a high number of attestations in the response to Cosign. The result will be that the attacker can cause Cosign to go into a long or infinite loop that will prevent other users from verifying their data. In Kyvernos case, an attacker whose privileges are limited to making requests to the cluster can make a request with an image reference to their own registry, trigger the infinite loop and deny other users from completing their admission requests. Alternatively, the attacker can obtain control of the registry used by an organization and return a high number of attestations instead the expected number of attestations. The issue can be mitigated rather simply by setting a limit to the limit of attestations that Cosign will loop through. The limit does not need to be high to be within the vast majority of use cases and still prevent the endless data attack. This issue has been patched in version 2.2.1 and users are advised to upgrade.
ImageSharp is a 2D graphics library. In versions below 2.1.11 and 3.0.0 through 3.1.10, a specially crafted GIF file containing a malformed comment extension block (with a missing block terminator) can cause the ImageSharp GIF decoder to enter an infinite loop while attempting to skip the block. This leads to a denial of service. Applications processing untrusted GIF input should upgrade to a patched version. This issue is fixed in versions 2.1.11 and 3.1.11.
This affects the package glob-parent before 5.1.2. The enclosure regex used to check for strings ending in enclosure containing path separator.
This affects the package jinja2 from 0.0.0 and before 2.11.3. The ReDoS vulnerability is mainly due to the `_punctuation_re regex` operator and its use of multiple wildcards. The last wildcard is the most exploitable as it searches for trailing punctuation. This issue can be mitigated by Markdown to format user content instead of the urlize filter, or by implementing request timeouts and limiting process memory.
Cloudflare quiche was discovered to be vulnerable to unbounded storage of information related to connection ID retirement, which could lead to excessive resource consumption. Each QUIC connection possesses a set of connection Identifiers (IDs); see RFC 9000 Section 5.1 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Endpoints declare the number of active connection IDs they are willing to support using the active_connection_id_limit transport parameter. The peer can create new IDs using a NEW_CONNECTION_ID frame but must stay within the active ID limit. This is done by retirement of old IDs, the endpoint sends NEW_CONNECTION_ID includes a value in the retire_prior_to field, which elicits a RETIRE_CONNECTION_ID frame as confirmation. An unauthenticated remote attacker can exploit the vulnerability by sending NEW_CONNECTION_ID frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that RETIRE_CONNECTION_ID frames can only be sent at a slower rate than they are received, leading to storage of information related to connection IDs in an unbounded queue. Quiche versions 0.19.2 and 0.20.1 are the earliest to address this problem. There is no workaround for affected versions.
In Eclipse Jetty 9.4.6.v20170531 to 9.4.36.v20210114 (inclusive), 10.0.0, and 11.0.0 when Jetty handles a request containing multiple Accept headers with a large number of “quality” (i.e. q) parameters, the server may enter a denial of service (DoS) state due to high CPU usage processing those quality values, resulting in minutes of CPU time exhausted processing those quality values.
A vulnerability in a feature that monitors RADIUS requests on Cisco Identity Services Engine (ISE) Software could allow an unauthenticated, remote attacker to negatively affect the performance of an affected device. This vulnerability is due to insufficient management of system resources. An attacker could exploit this vulnerability by taking actions that cause Cisco ISE Software to receive specific RADIUS traffic. A successful and sustained exploit of this vulnerability could allow the attacker to cause reduced performance of the affected device, resulting in significant delays to RADIUS authentications. There are workarounds that address this vulnerability.
jsx-slack is a library for building JSON objects for Slack Block Kit surfaces from JSX. In versions prior to 4.5.1 users are vulnerable to a regular expression denial-of-service (ReDoS) attack. If attacker can put a lot of JSX elements into `<blockquote>` tag, an internal regular expression for escaping characters may consume an excessive amount of computing resources. jsx-slack v4.5.1 has patched to a regex for escaping blockquote characters. Users are advised to upgrade as soon as possible.
An uncontrolled resource consumption vulnerability in Palo Alto Networks PAN-OS allows for a remote unauthenticated user to upload temporary files through the management web interface that are not properly deleted after the request is finished. It is possible for an attacker to disrupt the availability of the management web interface by repeatedly uploading files until available disk space is exhausted. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.4; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.
Receiving a large text message containing URLs in WhatsApp for iOS prior to v2.20.91.4 could have caused the application to freeze while processing the message.
supybot-fedora implements the command 'refresh', that refreshes the cache of all users from FAS. This takes quite a while to run, and zodbot stops responding to requests during this time.
Denial-of-service vulnerability in the web server of the Eaton SMP Gateway allows attacker to potentially force an unexpected restart of the automation platform, impacting the availability of the product. In rare situations, the issue could cause the SMP device to restart in Safe Mode or Max Safe Mode. When in Max Safe Mode, the product is not vulnerable anymore.
A denial-of-service vulnerability in the Fanuc i Series CNC (0i-MD and 0i Mate-MD) could allow an unauthenticated, remote attacker to cause an affected CNC to become inaccessible to other devices.
jsx-slack is a package for building JSON objects for Slack block kit surfaces from JSX. The maintainers found the patch for CVE-2021-43838 in jsx-slack v4.5.1 is insufficient tfor protection from a Regular Expression Denial of Service (ReDoS) attack. If an attacker can put a lot of JSX elements into `<blockquote>` tag _with including multibyte characters_, an internal regular expression for escaping characters may consume an excessive amount of computing resources. v4.5.1 passes the test against ASCII characters but misses the case of multibyte characters. jsx-slack v4.5.2 has updated regular expressions for escaping blockquote characters to prevent catastrophic backtracking. It is also including an updated test case to confirm rendering multiple tags in `<blockquote>` with multibyte characters.
Wire-server is the system server for the wire back-end services. Releases prior to v2022-03-01 are subject to a denial of service attack via a crafted object causing a hash collision. This collision causes the server to spend at least quadratic time parsing it which can lead to a denial of service for a heavily used server. The issue has been fixed in wire-server 2022-03-01 and is already deployed on all Wire managed services. On premise instances of wire-server need to be updated to 2022-03-01, so that their backends are no longer affected. There are no known workarounds for this issue.
A flaw was found in AMQ Broker. This issue can cause a partial interruption to the availability of AMQ Broker via an Out of memory (OOM) condition. This flaw allows an attacker to partially disrupt availability to the broker through a sustained attack of maliciously crafted messages. The highest threat from this vulnerability is system availability.
An exploitable insufficient resource pool vulnerability exists in the session communication functionality of Allen Bradley Micrologix 1400 Series B Firmware 21.2 and before. A specially crafted stream of packets can cause a flood of the session resource pool resulting in legitimate connections to the PLC being disconnected. An attacker can send unauthenticated packets to trigger this vulnerability.
Certain HP OfficeJet Pro printers are potentially vulnerable to a Denial of Service when using an improper eSCL URL GET request.
Passport-SAML is a SAML 2.0 authentication provider for Passport, the Node.js authentication library. Prior to version 3.1.0, a malicious SAML payload can require transforms that consume significant system resources to process, thereby resulting in reduced or denied service. This would be an effective way to perform a denial-of-service attack. This has been resolved in version 3.1.0. The resolution is to limit the number of allowable transforms to 2.
mx-chain-go is the official implementation of the MultiversX blockchain protocol, written in golang. When executing a relayed transaction, if the inner transaction failed, it would have increased the inner transaction's sender account nonce. This could have contributed to a limited DoS attack on a targeted account. The fix is a breaking change so a new flag `RelayedNonceFixEnableEpoch` was needed. This was a strict processing issue while validating blocks on a chain. This vulnerability has been patched in version 1.4.17.
Uncontrolled Resource Consumption vulnerability in Saturday Drive Ninja Forms Contact Form – The Drag and Drop Form Builder for WordPress leading to DoS.This issue affects Ninja Forms Contact Form – The Drag and Drop Form Builder for WordPress: from n/a through 3.6.25.
A flaw was found in Open Virtual Network where the service monitor MAC does not properly rate limit. This issue could allow an attacker to cause a denial of service, including on deployments with CoPP enabled and properly configured.
Uncontrolled Resource Consumption in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows an remote attacker to influence the availability of the webserver by invocing a Slowloris style attack via HTTP requests.
Extremely large RSA keys in certificate chains can cause a client/server to expend significant CPU time verifying signatures. With fix, the size of RSA keys transmitted during handshakes is restricted to <= 8192 bits. Based on a survey of publicly trusted RSA keys, there are currently only three certificates in circulation with keys larger than this, and all three appear to be test certificates that are not actively deployed. It is possible there are larger keys in use in private PKIs, but we target the web PKI, so causing breakage here in the interests of increasing the default safety of users of crypto/tls seems reasonable.
Ribose RNP before 0.16.3 may hang when the input is malformed.
Denial of service vulnerability in PowerDNS Recursor allows authoritative servers to be marked unavailable.This issue affects Recursor: through 4.6.5, through 4.7.4 , through 4.8.3.
Versions of the package graphql from 16.3.0 and before 16.8.1 are vulnerable to Denial of Service (DoS) due to insufficient checks in the OverlappingFieldsCanBeMergedRule.ts file when parsing large queries. This vulnerability allows an attacker to degrade system performance. **Note:** It was not proven that this vulnerability can crash the process.
cmark-gfm is GitHub's fork of cmark, a CommonMark parsing and rendering library and program in C. A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. This CVE covers quadratic complexity issues when parsing text which leads with either large numbers of `_` characters. This issue has been addressed in version 0.29.0.gfm.10. Users are advised to upgrade. Users unable to upgrade should validate that their input comes from trusted sources. ### Impact A polynomial time complexity issue in cmark-gfm may lead to unbounded resource exhaustion and subsequent denial of service. ### Proof of concept ``` $ ~/cmark-gfm$ python3 -c 'pad = "_" * 100000; print(pad + "." + pad, end="")' | time ./build/src/cmark-gfm --to plaintext ``` Increasing the number 10000 in the above commands causes the running time to increase quadratically. ### Patches This vulnerability have been patched in 0.29.0.gfm.10. ### Note on cmark and cmark-gfm XXX: TBD [cmark-gfm](https://github.com/github/cmark-gfm) is a fork of [cmark](https://github.com/commonmark/cmark) that adds the GitHub Flavored Markdown extensions. The two codebases have diverged over time, but share a common core. These bugs affect both `cmark` and `cmark-gfm`. ### Credit We would like to thank @gravypod for reporting this vulnerability. ### References https://en.wikipedia.org/wiki/Time_complexity ### For more information If you have any questions or comments about this advisory: * Open an issue in [github/cmark-gfm](https://github.com/github/cmark-gfm)
Versions of the package asyncua before 0.9.96 are vulnerable to Denial of Service (DoS) such that an attacker can send a malformed packet and as a result, the server will enter into an infinite loop and consume excessive memory.
react/http is an event-driven, streaming HTTP client and server implementation for ReactPHP. Previous versions of ReactPHP's HTTP server component contain a potential DoS vulnerability that can cause high CPU load when processing large HTTP request bodies. This vulnerability has little to no impact on the default configuration, but can be exploited when explicitly using the RequestBodyBufferMiddleware with very large settings. This might lead to consuming large amounts of CPU time for processing requests and significantly delay or slow down the processing of legitimate user requests. This issue has been addressed in release 1.9.0. Users are advised to upgrade. Users unable to upgrade may keep the request body limited using RequestBodyBufferMiddleware with a sensible value which should mitigate the issue. An infrastructure or DevOps workaround could be to place a reverse proxy in front of the ReactPHP HTTP server to filter out any excessive HTTP request bodies.
Jetty is a java based web server and servlet engine. In affected versions servlets with multipart support (e.g. annotated with `@MultipartConfig`) that call `HttpServletRequest.getParameter()` or `HttpServletRequest.getParts()` may cause `OutOfMemoryError` when the client sends a multipart request with a part that has a name but no filename and very large content. This happens even with the default settings of `fileSizeThreshold=0` which should stream the whole part content to disk. An attacker client may send a large multipart request and cause the server to throw `OutOfMemoryError`. However, the server may be able to recover after the `OutOfMemoryError` and continue its service -- although it may take some time. This issue has been patched in versions 9.4.51, 10.0.14, and 11.0.14. Users are advised to upgrade. Users unable to upgrade may set the multipart parameter `maxRequestSize` which must be set to a non-negative value, so the whole multipart content is limited (although still read into memory).