Python Software Foundation CPython version From 3.2 until 3.6.4 on Windows contains a Buffer Overflow vulnerability in os.symlink() function on Windows that can result in Arbitrary code execution, likely escalation of privilege. This attack appears to be exploitable via a python script that creates a symlink with an attacker controlled name or location. This vulnerability appears to have been fixed in 3.7.0 and 3.6.5.
A buffer overflow vulnerability in FortiAnalyzer CLI 6.4.5 and below, 6.2.7 and below, 6.0.x and FortiManager CLI 6.4.5 and below, 6.2.7 and below, 6.0.x may allow an authenticated, local attacker to perform a Denial of Service attack by running the `diagnose system geoip-city` command with a large ip value.
Memory corruption can occur during context user dumps due to inadequate checks on buffer length.
A flaw was found in virtio-win. The `RhelDoUnMap()` function does not properly validate the number of descriptors provided by a user during an unmap request. A local user could exploit this input validation vulnerability by supplying an excessive number of descriptors, leading to a buffer overrun. This can cause a system crash, resulting in a Denial of Service (DoS).
In tscpu_write_GPIO_out and mtkts_Abts_write of mtk_ts_Abts.c, there is a possible buffer overflow in an sscanf due to improper input validation. This could lead to a local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
Micron Crucial MX500 Series Solid State Drives M3CR046 is vulnerable to Buffer Overflow, which can be triggered by sending specially crafted ATA packets from the host to the drive controller. NOTE: The supplier states that this vulnerability was fully remediated in December 2024 and that updated firmware is available through Crucial’s official support page.
In the MTK_FLP_MSG_HAL_DIAG_REPORT_DATA_NTF handler of flp2hal_- interface.c, there is a possible stack buffer overflow due to a missing bounds check. This could lead to local escalation of privilege in a privileged process with System execution privileges needed. User interaction is not needed for exploitation.
In wlan STA driver, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: WCNCR00473802; Issue ID: MSV-5970.
Memory corruption due to buffer copy without checking the size of input in Core while processing ioctl commands from diag client applications.
Memory corruption in core due to buffer copy without check9ing the size of input while processing ioctl queries.
Memory corruption in FM Host due to buffer copy without checking the size of input in FM Host
A crafted NTFS image can cause heap exhaustion in ntfs_get_attribute_value in NTFS-3G through 2021.8.22.
Amazon AWS Client VPN has a buffer overflow that could potentially allow a local actor to execute arbitrary commands with elevated permissions. This is resolved in 3.11.1 on Windows, 3.9.1 on macOS, and 3.12.1 on Linux. NOTE: although the macOS resolution is the same as for CVE-2024-30165, this vulnerability on macOS is not the same as CVE-2024-30165.
Memory corruption in camera due to buffer copy without checking size of input in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Mobile, Snapdragon Wearables
Issue of buffer overflow caused by insufficient data verification in the kernel gyroscope module. Impact: Successful exploitation of this vulnerability may affect availability.
Issue of buffer overflow caused by insufficient data verification in the kernel acceleration module. Impact: Successful exploitation of this vulnerability may affect availability.
Mate 30 10.0.0.203(C00E201R7P2) have a buffer overflow vulnerability. After obtaining the root permission, an attacker can exploit the vulnerability to cause buffer overflow.
Possible buffer overflow due to improper validation of buffer length while processing fast boot commands in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music
Buffer Overflow while processing IOCTL for getting peripheral endpoint information there is no proper validation for input maximum endpoint pair and its size in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking
Possible buffer overflow due to lack of offset length check while updating the buffer value in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables
An improper boundary check in RPMB ldfw prior to SMR Feb-2022 Release 1 allows arbitrary memory write and code execution.
Possible buffer overflow due to lack of length check of source and destination buffer before copying in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music
Buffer overflow in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access.
Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Renesas arm-trusted-firmware allows Local Execution of Code. This vulnerability is associated with program files https://github.Com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.5/drivers/renesas/common/io/i... https://github.Com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.5/drivers/renesas/common/io/io_rcar.C . In line 313 "addr_loaded_cnt" is checked not to be "CHECK_IMAGE_AREA_CNT" (5) or larger, this check does not halt the function. Immediately after (line 317) there will be an overflow in the buffer and the value of "dst" will be written to the area immediately after the buffer, which is "addr_loaded_cnt". This will allow an attacker to freely control the value of "addr_loaded_cnt" and thus control the destination of the write immediately after (line 318). The write in line 318 will then be fully controlled by said attacker, with whichever address and whichever value ("len") they desire.
Buffer overflow in "rcar_dev_init" due to using due to using untrusted data (rcar_image_number) as a loop counter before verifying it against RCAR_MAX_BL3X_IMAGE. This could lead to a full bypass of secure boot.
Buffer overflow in the bootloader for some Intel(R) Server Boards, Server Systems and Compute Modules before version 2.45 may allow a privileged user to potentially enable escalation of privilege via local access.
Memory corruption while parsing IPC frequency table parameters for LPLH that has size greater than expected size.
HCL Notes is susceptible to a Buffer Overflow vulnerability in DXL due to improper validation of user input. A successful exploit could enable an attacker to crash Notes or execute attacker-controlled code on the client system.
mwifiex_cmd_802_11_ad_hoc_start in drivers/net/wireless/marvell/mwifiex/join.c in the Linux kernel through 5.10.4 might allow remote attackers to execute arbitrary code via a long SSID value, aka CID-5c455c5ab332.
A buffer overflow issue was addressed with improved memory handling. This issue is fixed in macOS Sonoma 14.6. An app may be able to execute arbitrary code with kernel privileges.
An array overflow was discovered in mt76_add_fragment in drivers/net/wireless/mediatek/mt76/dma.c in the Linux kernel before 5.5.10, aka CID-b102f0c522cf. An oversized packet with too many rx fragments can corrupt memory of adjacent pages.
Buffer overflow in the BMC firmware for some Intel(R) Server Boards, Server Systems and Compute Modules before version 2.47 may allow a privileged user to potentially enable escalation of privilege via local access.
Memory corruption while processing shared command buffer packet between camera userspace and kernel.
A process can potentially cause a buffer overflow in the display service allowing privilege escalation by executing code as that service in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables
A buffer overflow [CWE-121] in the TFTP client library of FortiOS before 6.4.7 and FortiOS 7.0.0 through 7.0.2, may allow an authenticated local attacker to achieve arbitrary code execution via specially crafted command line arguments.
Memory corruption while parsing clock configuration data for a specific hardware type.
A buffer copy without checking size of input ('classic buffer overflow') in Fortinet FortiAnalyzer version 7.0.2 and below, version 6.4.7 and below, version 6.2.9 and below, version 6.0.11 and below, version 5.6.11 and below, FortiManager version 7.0.2 and below, version 6.4.7 and below, version 6.2.9 and below, version 6.0.11 and below, version 5.6.11 and below, FortiOS version 7.0.0 through 7.0.4, 6.4.0 through 6.4.8, 6.2.0 through 6.2.10, 6.0.x and FortiProxy version 7.0.0 through 7.0.3, 2.0.0 through 2.0.8, 1.2.x, 1.1.x and 1.0.x allows attacker to execute unauthorized code or commands via crafted CLI `execute restore image` and `execute certificate remote` operations with the tFTP protocol.
Memory corruption in HLOS while converting from authorization token to HIDL vector.
In meta, there is a possible classic buffer overflow due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08000473; Issue ID: ALPS08000473.
Memory corruption in Audio while processing IIR config data from AFE calibration block.
An issue was discovered in the Linux kernel before 5.13.3. lib/seq_buf.c has a seq_buf_putmem_hex buffer overflow.
Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.40, D6400 before 1.0.0.74, D7000v2 before 1.0.0.74, D8500 before 1.0.3.39, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, R6250 before 1.0.4.20, R6300v2 before 1.0.4.18, R6400v2 before 1.0.2.52, R6700 before 1.0.1.44, R6900 before 1.0.1.46, R7000 before 1.0.9.26, R6900P before 1.3.0.20, R7000P before 1.3.0.20, R7100LG before 1.0.0.34, R7300DST before 1.0.0.62, R8000 before 1.0.4.12, R7900P before 1.3.0.10, R8000P before 1.3.0.10, R8300 before 1.0.2.116, R8500 before 1.0.2.116, WN2500RPv2 before 1.0.1.54, and WNDR3400v3 before 1.0.1.18.
Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6400 before 1.0.0.74, D7000v2 before 1.0.0.74, D7800 before 1.0.1.34, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.102, DGND2200Bv4 before 1.0.0.102, DM200 before 1.0.0.52, JNDR3000 before 1.0.0.22, RBK50 before 2.3.5.30, RBR50 before 2.3.5.30, RBS50 before 2.3.5.30, RBW30 before 2.1.2.6, R6250 before 1.0.4.26, R6300v2 before 1.0.4.24, R6400 before 1.0.1.36, R6400v2 before 1.0.2.52, R6700 before 1.0.1.44, R6900 before 1.0.1.44, R7000 before 1.0.9.26, R6900P before 1.3.0.20, R7000P before 1.3.0.20, R7100LG before 1.0.0.40, R7300DST before 1.0.0.62, R7500v2 before 1.0.3.26, R7800 before 1.0.2.44, R7900 before 1.0.2.10, R8000 before 1.0.4.12, R7900P before 1.3.0.10, R8000P before 1.3.0.10, R8300 before 1.0.2.116, R8500 before 1.0.2.116, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WNDR3400v3 before 1.0.1.18, WNDR3700v4 before 1.0.2.96, WNDR4300v1 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, WNR2000v5 before 1.0.0.64, and WNR3500Lv2 before 1.2.0.48.
Memory Corruption in VR Service while sending data using Fast Message Queue (FMQ).
Memory corruption during the network scan request.
Memory corruption while invoking IOCTL calls for MSM module from the user space during audio playback and record.
A buffer overflow issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.3. An app with root privileges may be able to execute arbitrary code with kernel privileges.
A buffer overflow vulnerability was found in the NVM Express (NVMe) driver in the Linux kernel. Only privileged user could specify a small meta buffer and let the device perform larger Direct Memory Access (DMA) into the same buffer, overwriting unrelated kernel memory, causing random kernel crashes and memory corruption.
Memory corruption while querying module parameters from Listen Sound model client in kernel from user space.
Memory corruption when the bandpass filter order received from AHAL is not within the expected range.