Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R6700v3 before 1.0.4.98, R6400v2 before 1.0.4.98, R7000 before 1.0.11.106, R6900P before 1.3.2.124, R7000P before 1.3.2.124, R7900 before 1.0.4.26, R7850 before 1.0.5.60, R8000 before 1.0.4.58, RS400 before 1.5.0.48, R6400 before 1.0.1.62, R6700 before 1.0.2.16, R6900 before 1.0.2.16, MK60 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, CBR40 before 2.5.0.10, R8000P before 1.4.1.62, R7960P before 1.4.1.62, R7900P before 1.4.1.62, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, EX7500 before 1.0.0.68, EAX80 before 1.0.1.62, EAX20 before 1.0.0.36, RBK752 before 3.2.16.6, RBK753 before 3.2.16.6, RBK753S before 3.2.16.6, RBK754 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBK853 before 3.2.16.6, RBK854 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6850 before 1.1.0.76, R6350 before 1.1.0.76, R6330 before 1.1.0.76, D7800 before 1.0.1.58, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK40 before 2.6.1.36, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK23 before 2.6.1.36, RBR20 before 2.6.1.38, RBS20 before 2.6.1.38, RBK12 before 2.6.1.44, RBK13 before 2.6.1.44, RBK14 before 2.6.1.44, RBK15 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, R6800 before 1.2.0.72, R6900v2 before 1.2.0.72, R6700v2 before 1.2.0.72, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, R7800 before 1.0.2.74, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, XR450 before 2.3.2.66, XR500 before 2.3.2.66, XR700 before 1.0.1.34, and XR300 before 1.0.3.50.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System 1.6.0.26. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SettingConfigController class. When parsing the fileName parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-12121.

Certain NETGEAR devices are affected by privilege escalation. This affects D8500 before 1.0.3.44, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v3 before 1.0.2.66, R6900 before 1.0.2.4, R6900P before 1.3.2.126, R7000 before 1.0.9.42, R7000P before 1.3.2.126, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7900 before 1.0.3.10, R8300 before 1.0.2.130, and R8500 before 1.0.2.130.

When uploading a firmware image to a Netgear Nighthawk Wifi6 Router (RAX30), a hidden “forceFWUpdate” parameter may be provided to force the upgrade to complete and bypass certain validation checks. End users can use this to upload modified, unofficial, and potentially malicious firmware to the device.

cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the sn parameter to the transfer_license command.

Stack-based buffer overflow in cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary code via the sn parameter to the transfer_license command.

Netgear R6220 v1.1.0.114_1.0.1 suffers from Incorrect Access Control, resulting in a command injection vulnerability.

A command execution vulnerability exists in the hidden telnet service functionality of Netgear Orbi Router RBR750 4.6.8.5. A specially-crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

A command execution vulnerability exists in the access control functionality of Netgear Orbi Router RBR750 4.6.8.5. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

NETGEAR ProSAFE Network Management System Tomcat Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability. The specific flaw exists within the product installer. The issue results from the use of a vulnerable version of Apache Tomcat. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-22868.

Certain NETGEAR devices are affected by anonymous root access. This affects ReadyNAS Surveillance 1.1.1-3-armel and earlier and ReadyNAS Surveillance 1.4.1-3-amd64 and earlier.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been declared as critical. This vulnerability affects the function sub_54340. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. This affects the function sub_3C03C. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear JWNR2000v2 1.0.0.11. Affected by this issue is the function get_cur_lang_ver. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Netgear JWNR2000v2 1.0.0.11. Affected is the function check_language_file. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this issue is the function sub_503FC. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Netgear EX6120 1.0.0.68. Affected by this vulnerability is the function fwAcosCgiInbound. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been classified as critical. This affects the function sub_54014. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear EX6200 1.0.3.94. This issue affects the function sub_3D0BC. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been rated as critical. Affected by this issue is the function sub_435E04. The manipulation of the argument host leads to command injection. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear EX6120 1.0.3.94. Affected by this issue is the function sub_30394. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. This vulnerability affects the function sub_3C8EC. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. Affected is the function sub_41940. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Netgear JWNR2000v2 1.0.0.11. Affected by this vulnerability is the function default_version_is_new. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this vulnerability is the function sub_47F7C. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability was discovered in Netgear R6200 v2 firmware through R6200v2-V1.0.3.12 via binary /sbin/acos_service that could allow remote authenticated attackers the ability to modify values in the vulnerable parameter.

NETGEAR R6200_V2 firmware versions through R6200v2-V1.0.3.12_10.1.11 and R6300_V2 firmware versions through R6300v2-V1.0.4.52_10.0.93 allow remote authenticated attackers to execute arbitrary command via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameters.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6220 before 1.0.0.52, D6400 before 1.0.0.86, D7000v2 before 1.0.0.53, D8500 before 1.0.3.44, R6220 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.64, R6400 before 1.0.1.46, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6700v3 before 1.0.2.66, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7800 before 1.0.2.60, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.28, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.32.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to password.cgi.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameter.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to admin_account.cgi.

NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an authenticated user.

Netgear EX6200 v1.0.3.94 was discovered to contain a buffer overflow via the wla_temp_ssid parameter at acosNvramConfig_set.

Netgear DG834Gv5 1.6.01.34 was discovered to contain multiple buffer overflows via the wla_ssid and wla_temp_ssid parameters at bsw_ssid.cgi.

NETGEAR ProSAFE Network Management System UpLoadServlet Unrestricted File Upload Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the UpLoadServlet class. The issue results from the lack of proper validation of user-supplied data, which can allow the upload of arbitrary files. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-19720.

NETGEAR ProSAFE Network Management System MFileUploadController Unrestricted File Upload Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the MFileUploadController class. The issue results from the lack of proper validation of user-supplied data, which can allow the upload of arbitrary files. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-19717.

NETGEAR ProSAFE Network Management System BkreProcessThread Exposed Dangerous Function Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the BkreProcessThread class. The issue results from an exposed dangerous function. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. . Was ZDI-CAN-19719.

Netgear Nighthawk R6700 version 1.0.4.120 contains a command injection vulnerability in update functionality of the device. By triggering a system update check via the SOAP interface, the device is susceptible to command injection via preconfigured values.

Netgear RAX43 version 1.0.3.96 makes use of hardcoded credentials. It does not appear that normal users are intended to be able to manipulate configuration backups due to the fact that they are encrypted. This encryption is accomplished via a password-protected zip file with a hardcoded password (RAX50w!a4udk). By unzipping the configuration using this password, a user can reconfigure settings not intended to be manipulated, re-zip the configuration, and restore a backup causing these settings to be changed.

Certain NETGEAR devices are affected by SQL injection. This affects D3600 before 1.0.0.68, D6000 before 1.0.0.68, D6200 before 1.1.00.28, D6220 before 1.0.0.40, D6400 before 1.0.0.74, D7000 before 1.0.1.60, D7000v2 before 1.0.0.74, D7800 before 1.0.1.34, D8500 before 1.0.3.39, DC112A before 1.0.0.40, EX8000 before 1.0.0.118, JR6150 before 1.0.1.18, R6050 before 1.0.1.18, R6220 before 1.1.0.66, R6250 before 1.0.4.26, R6300v2 before 1.0.4.24, R6400 before 1.0.1.36, R6400v2 before 1.0.2.52, R6700 before 1.0.1.44, R6700v2 before 1.2.0.16, R6800 before 1.2.0.16, R6900v2 before 1.2.0.16, R6900 before 1.0.1.44, R7000 before 1.0.9.26, R6900P before 1.3.0.20, R7000P before 1.3.0.20, R7100LG before 1.0.0.40, R7300DST before 1.0.0.62, R7500 before 1.0.0.118, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R7900 before 1.0.2.10, R8000 before 1.0.4.12, R7900P before 1.3.0.10, R8000P before 1.3.0.10, R8300 before 1.0.2.116, R8500 before 1.0.2.116, R8900 before 1.0.3.6, R9000 before 1.0.3.10, WNDR3700v4 before 1.0.2.102, WNDR3700v5 before 1.1.0.54, WNDR4300v1 before 1.0.2.98, WNDR4300v2 before 1.0.0.56, and WNDR4500v3 before 1.0.0.56.

NETGEAR SRX5308 4.3.5-3 devices allow SQL Injection, as exploited in the wild in September 2019 to add a new user account.

NETGEAR ProSafe SSL VPN firmware FVS336Gv2 and FVS336Gv3 was discovered to contain a SQL injection vulnerability via USERDBDomains.Domainname at cgi-bin/platform.cgi.

NETGEAR RAX30 SOAP Request SQL Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of specific SOAP requests. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the service account. Was ZDI-CAN-19754.

BigTree CMS through 4.2.18 allows remote authenticated users to conduct SQL injection attacks via a crafted tables object in manifest.json in an uploaded package. This issue exists in core\admin\modules\developer\extensions\install\process.php and core\admin\modules\developer\packages\install\process.php. NOTE: the vendor states "You must implicitly trust any package or extension you install as they all have the ability to write PHP files.

An authenticated SQL injection vulnerability exists in the BIG-IP Configuration utility which may allow an authenticated attacker with network access to the Configuration utility through the BIG-IP management port and/or self IP addresses to execute arbitrary system commands.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

SQL injection vulnerability in the WP-Testimonials plugin 3.4.1 for WordPress allows an authenticated user to execute arbitrary SQL commands via the testid parameter to wp-admin/admin.php.

JFinalOA before v2025.01.01 was discovered to contain a SQL injection vulnerability via the component apply/save#oaContractApply.id.