A vulnerability classified as critical was found in D-Link DI-7003GV2 24.04.18D1 R(68125). This vulnerability affects the function sub_4983B0 of the file /H5/backup.asp?opt=reset of the component Factory Reset Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to reboot the router by submitting a reboot.html GET request without being authenticated on the admin interface.

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formdumpeasysetup. This vulnerability allows attackers to cause a Denial of Service (DoS) via the config.save_network_enabled parameter.

D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanL2TP. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DIR-619 Ax v1.00 was discovered to contain a stack overflow in the function formSetWanPPPoE. This vulnerability allows attackers to cause a Denial of Service (DoS) via the curTime parameter.

D-Link DI-8100 v16.07.26A1 has a stack overflow vulnerability in the dbsrv_asp function.

An HTTP smuggling attack in the web application of D-Link DIR-X1860 before v1.10WWB09_Beta allows a remote unauthenticated attacker to DoS the web application via sending a specific HTTP packet.

A denial-of-service attack in WPA2, and WPA3-SAE authentication methods in D-Link DIR-X1560, v1.04B04, and DIR-X6060, v1.11B04 allows a remote unauthenticated attacker to disconnect a wireless client via sending specific spoofed SAE authentication frames.

Null Pointer Dereference vulnerability in D-Link DIR-825 2.10b02, which could let a remote malicious user cause a denial of service. The vulnerability could be triggered by sending an HTTP request with URL /vct_wan; the sbin/httpd would invoke the strchr function and take NULL as a first argument, which finally leads to the segmentation fault. NOTE: The DIR-825 and all hardware revisions is considered End of Life and as such this issue will not be patched

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_certificate function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the strrchr in the upload_certificate function would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null pointer dereference vulnerability in D-Link DAP-2310 2,10RC039, DAP-2330 1.10RC036 BETA, DAP-2360 2.10RC055, DAP-2553 3.10rc039 BETA, DAP-2660 1.15rc131b, DAP-2690 3.20RC115 BETA, DAP-2695 1.20RC093, DAP-3320 1.05RC027 BETA and DAP-3662 1.05rc069 in the sbin/httpd binary. The crash happens at the `atoi' operation when a specific network package are sent to the httpd binary.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_config function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the content in upload_file variable is NULL in the upload_config function then the strncasecmp would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null Pointer Dereference vulnerability exists in D-Link DSP-W215 1.10, which could let a remote malicious user cause a denial of servie via usr/bin/lighttpd. It could be triggered by sending an HTTP request without URL in the start line directly to the device. NOTE: The DSP-W215 and all hardware revisions is considered End of Life and as such this issue will not be patched

D-link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img is vulnerable to Buffer Overflow via /goform/addRouting.

D-Link DIR-868L Hardware version A1, firmware version 1.12 is vulnerable to Buffer Overflow. The vulnerability is in scandir.sgi binary.

In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.

A Buffer overflow vulnerability in D-Link DAP-2555 REVA_FIRMWARE_1.20 allows remote attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

A Stack overflow vulnerability in D-Link DCS-932L REVB_FIRMWARE_2.18.01 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via formWlanGuestSetup allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."

A buffer overflow vulnerability in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 via goform/formWPS, allows remote authenticated users to trigger a denial of service (DoS) through the parameter "webpage."

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the curTime parameter on login.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the FILECODE parameter on login.

Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution.

D-Link DIR3060 DIR3060A1_FW111B04.bin is vulnerable to Buffer Overflow.

Dlink Dir-3040us A1 1.20b03a hotfix is vulnerable to Buffer Overflow. Any user having read/write access to ftp server can write directly to ram causing buffer overflow if file or files uploaded are greater than available ram. Ftp server allows change of directory to root which is one level up than root of usb flash directory. During upload ram is getting filled and causing system resource exhaustion (no free memory) which causes system to crash and reboot.

In D-Link DAP1650 v1.04 firmware, the fileaccess.cgi program in the firmware has a buffer overflow vulnerability caused by strncpy.

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Buffer Overflow via cgibin, hnap_main,

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetPortTr of the file /goform/formSetPortTr. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formResetStatistic of the file /goform/formResetStatistic. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

D-Link DSL-3782 EU v1.01:EU v1.03 is affected by a buffer overflow which can cause a denial of service. This vulnerability exists in the web interface "/cgi-bin/New_GUI/Igmp.asp". Authenticated remote attackers can trigger this vulnerability by sending a long string in parameter 'igmpsnoopEnable' via an HTTP request.

A buffer overflow in D-Link DIR-615 C2 3.03WW. The ping_ipaddr parameter in ping_response.cgi POST request allows an attacker to crash the webserver and might even gain remote code execution.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12066.

Buffer Overflow Vulnerability in D-Link DIR-825 v1.33.0.44ebdd4-embedded and below allows attacker to execute arbitrary code via the GetConfig method to the /CPE endpoint.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DI-8100 16.07.21. It has been rated as critical. Affected by this issue is some unknown functionality of the file /pppoe_base.asp of the component jhttpd. The manipulation of the argument mschap_en leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-513 1.0. This affects an unknown part of the file /goform/formSetWanPPTP. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DAP-2660 v1.13 was discovered to contain a buffer overflow via the f_ipv6_enable parameter at /bsc_ipv6. This vulnerability is exploited via a crafted POST request.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function FUN_0001be68.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the param_2 parameter in the FUN_0000acb4 function.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.04B04. This issue affects the function formEasySetupWizard3. The manipulation of the argument wan_connected leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetWAN_Wizard55. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.04B04. Affected is the function formSetEasy_Wizard. The manipulation of the argument curTime leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this issue is the function formSetWizard2. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-600L up to 2.07B01. Affected by this issue is the function formEasySetupWizard3. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formSetWAN_Wizard534. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-619L 2.04B04 and classified as critical. Affected by this vulnerability is the function formSetWAN_Wizard52. The manipulation of the argument curTime leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-600L up to 2.07B01 and classified as critical. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.