The Comcast firmware on Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows configuration changes via CSRF.

The Comcast firmware on Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST) devices allows configuration changes via CSRF.

Arris TG1682G devices with Comcast TG1682_2.0s7_PRODse 10.0.59.SIP.PC20.CT software allow Unauthenticated Stored XSS via the actionHandler/ajax_managed_services.php service parameter.

The administration web interface for the Arris Surfboard SB8200 lacks any protections against cross-site request forgery attacks. This means that an attacker could make configuration changes (such as changing the administrative password) without the consent of the user.

Ruckus R500 3.4.2.0.384 devices allow XSS via the index.asp Device Name field.

A CSRF issue in login.asp on Ruckus R500 3.4.2.0.384 devices allows remote attackers to access the panel or conduct SSRF attacks.

CSRF in login.asp on Ruckus devices allows an attacker to access the panel, and use SSRF to perform scraping or other analysis via the SUBCA-1 field on the Wireless Admin screen.

Multiple cross-site request forgery (CSRF) vulnerabilities in goform/RgDdns in ARRIS (formerly Motorola) SBG901 SURFboard Wireless Cable Modem allow remote attackers to hijack the authentication of administrators for requests that (1) change the dns service via the DdnsService parameter, (2) change the username via the DdnsUserName parameter, (3) change the password via the DdnsPassword parameter, or (4) change the host name via the DdnsHostName parameter.

An issue was discovered in CommScope Arris DG3450 Cable Gateway AR01.02.056.18_041520_711.NCS.10. A reflected XSS vulnerability was discovered in the https_redirect.php web page via the page parameter.

A cross-site-scripting vulnerability exists in Ruckus Access Point products (ZoneDirector, SmartZone, and AP Solo). If this vulnerability is exploited, an arbitrary script may be executed on the web browser of the user who is logging in the product. As for the affected products/models/versions, see the information provided by the vendor listed under [References] section or the list under [Product Status] section.

A vulnerability affecting F-Secure SAFE browser protection was discovered improper URL handling can be triggered to cause universal cross-site scripting through browsing protection in a SAFE web browser. User interaction is required prior to exploitation. A successful exploitation may lead to arbitrary code execution.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.6 before 18.6.3, and 18.7 before 18.7.1 that could have allowed an unauthenticated user to execute arbitrary code in the context of an authenticated user's browser by convincing the legitimate user to visit a specially crafted webpage.

An issue was discovered in chat.php in LiveZilla Live Chat 8.0.1.3 (Helpdesk). A blind JavaScript injection lies in the name parameter. Triggering this can fetch the username and passwords of the helpdesk employees in the URI. This leads to a privilege escalation, from unauthenticated to user-level access, leading to full account takeover. The attack fetches multiple credentials because they are stored in the database (stored XSS). This affects the mobile/chat URI via the lgn and psswrd parameters.

An improper neutralization of input vulnerability was identified in GitHub Enterprise Server that allows DOM-based cross-site scripting via Issues search label filter that could lead to privilege escalation and unauthorized workflow triggers. Successful exploitation requires an attacker to have access to the target GitHub Enterprise Server instance and to entice a user, while operating in sudo mode, to click on a crafted malicious link to perform actions that require elevated privileges. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.18.1, 3.17.7, 3.16.10, 3.15.14, 3.14.19.

Reflected cross-site scripting (XSS) vulnerability on the add assignees to a role page in Liferay Portal 7.3.3 through 7.4.3.97, and Liferay DXP 2023.Q3 before patch 6, 7.4 GA through update 92, and 7.3 before update 34 allows remote attackers to inject arbitrary web script or HTML via the _com_liferay_roles_admin_web_portlet_RolesAdminPortlet_tabs2 parameter.

In uClibc and uClibc-ng before 1.0.39, incorrect handling of special characters in domain names returned by DNS servers via gethostbyname, getaddrinfo, gethostbyaddr, and getnameinfo can lead to output of wrong hostnames (leading to domain hijacking) or injection into applications (leading to remote code execution, XSS, applications crashes, etc.). In other words, a validation step, which is expected in any stub resolver, does not occur.

Flowise < 2.1.1 suffers from a Stored Cross-Site vulnerability due to a lack of input sanitization in Flowise Chat Embed < 2.0.0.

The Script Console in Liferay Portal 7.0.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, 7.2 GA through fix pack 20, 7.1 GA through fix pack 28, 7.0 GA through fix pack 102 and 6.2 GA through fix pack 173 does not sufficiently protect against Cross-Site Request Forgery (CSRF) attacks, which allows remote attackers to execute arbitrary Groovy script via a crafted URL or a XSS vulnerability.

myDBR 5.8.3/4262 is affected by: Cross Site Scripting (XSS). The impact is: execute arbitrary code (remote). The component is: CSRF Token. The attack vector is: CSRF token injection to XSS.

Leanote Desktop through 2.6.2 allows XSS because a note's title is mishandled during syncing. This leads to remote code execution because of Node integration.

The Registrations for the Events Calendar WordPress plugin before 2.12.4 does not sanitise and escape some parameters when accepting event registrations, which could allow unauthenticated users to perform Cross-Site Scripting attacks.

The Favicon Generator plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 1.5. This is due to missing or incorrect nonce validation on the output_sub_admin_page_0 function. This makes it possible for unauthenticated attackers to delete arbitrary files on the server via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. The plugin author deleted the functionality of the plugin to patch this issue and close the plugin, we recommend seeking an alternative to this plugin.

aimhubio/aim version 3.22.0 contains a Cross-Site Request Forgery (CSRF) vulnerability in the tracking server. The vulnerability is due to overly permissive CORS settings, allowing cross-origin requests from all origins. This enables CSRF attacks on all endpoints of the tracking server, which can be chained with other existing vulnerabilities such as remote code execution, denial of service, and arbitrary file read/write.

SiYuan is a personal knowledge management system. Versions prior to 3.5.4 have a stored Cross-Site Scripting (XSS) vulnerability that allows an attacker to inject arbitrary HTML attributes into the `icon` attribute of a block via the `/api/attr/setBlockAttrs` API. The payload is later rendered in the dynamic icon feature in an unsanitized context, leading to stored XSS and, in the desktop environment, potential remote code execution (RCE). This issue bypasses the previous fix for issue `#15970` (XSS → RCE via dynamic icons). Version 3.5.4 contains an updated fix.

Leanote Desktop through 2.6.2 allows XSS because a note's title is mishandled when the batch feature is triggered. This leads to remote code execution because of Node integration.

Leostream Connection Broker 8.2.x is affected by stored XSS. An unauthenticated attacker can inject arbitrary JavaScript code via the webquery.pl User-Agent HTTP header. It is rendered by the admins the next time they log in. The JavaScript injected can be used to force the admin to upload a malicious Perl script that will be executed as root via libMisc::browser_client. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

In Eclipse Theia versions up to and including 1.2.0, the Markdown Preview (@theia/preview), can be exploited to execute arbitrary code.

An HTML injection vulnerability in Vaultwarden prior to v1.32.5 allows attackers to execute arbitrary code via injecting a crafted payload into the username field of an e-mail message.

Combodo iTop is an open source and web-based IT service management platform. Prior to versions 2.7.11, 3.1.2, and 3.2.0., iTop has a cross-site scripting vulnerability that can lead to cross-site request forgery on the `_table_id` parameter. Versions 2.7.11, 3.1.2, and 3.2.0 contain a patch for the issue.

Cross site scripting (XSS) vulnerability in sourcecodester PHP CRUD without Refresh/Reload using Ajax and DataTables Tutorial v1 by oretnom23, allows remote attackers to execute arbitrary code via the first_name, last_name, and email parameters to /ajax_crud.

A Cross-Site Scripting (XSS) and Cross-Site Request Forgery (CSRF) vulnerability exists when Power BI Report Server Template file (pbix) containing HTML files is uploaded to the server and HTML files are accessed directly by the victim. Combining these 2 vulnerabilities together, an attacker is able to upload malicious Power BI templates files to the server using the victim's session and run scripts in the security context of the user and perform privilege escalation in case the victim has admin privileges when the victim access one of the HTML files present in the malicious Power BI template uploaded. The security update addresses the vulnerability by helping to ensure that Power BI Report Server properly sanitize file uploads.

Mutation XSS exists in Mark Text through 0.16.2 that leads to Remote Code Execution. NOTE: this might be considered a duplicate of CVE-2020-26870; however, it can also be considered an issue in the design of the "source code mode" feature, which parses HTML even though HTML support is not one of the primary advertised roles of the product.

django-helpdesk is vulnerable to Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')

Cross-Site Request Forgery (CSRF) vulnerability in Ruben Garza, Jr. GitSync allows Code Injection.This issue affects GitSync: from n/a through 1.1.0.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to cross-site request forgery when unauthorized commands are submitted from a user the web application trusts. This may allow an attacker to remotely perform actions on the router’s management portal, such as making configuration changes, changing administrator credentials, and running system commands on the router.

An issue has been discovered in GitLab CE/EE affecting all versions from 14.10 before 18.2.7, 18.3 before 18.3.3, and 18.4 before 18.4.1 that could allow an attacker to inject malicious content that may lead to account takeover.

LedgerSMB does not check the origin of HTML fragments merged into the browser's DOM. By sending a specially crafted URL to an authenticated user, this flaw can be abused for remote code execution and information disclosure.

LedgerSMB does not sufficiently HTML-encode error messages sent to the browser. By sending a specially crafted URL to an authenticated user, this flaw can be abused for remote code execution and information disclosure.

XWiki Rendering is a generic Rendering system that converts textual input in a given syntax into another syntax. The cleaning of attributes during XHTML rendering, introduced in version 14.6-rc-1, allowed the injection of arbitrary HTML code and thus cross-site scripting via invalid attribute names. This can be exploited, e.g., via the link syntax in any content that supports XWiki syntax like comments in XWiki. When a user moves the mouse over a malicious link, the malicious JavaScript code is executed in the context of the user session. When this user is a privileged user who has programming rights, this allows server-side code execution with programming rights, impacting the confidentiality, integrity and availability of the XWiki instance. While this attribute was correctly recognized as not allowed, the attribute was still printed with a prefix `data-xwiki-translated-attribute-` without further cleaning or validation. This problem has been patched in XWiki 14.10.4 and 15.0 RC1 by removing characters not allowed in data attributes and then validating the cleaned attribute again. There are no known workarounds apart from upgrading to a version including the fix.

This vulnerability allows attackers to impersonate users and perform arbitrary actions leading to a Remote Code Execution (RCE) from the Alerts Settings page.

Overwolf Client 0.169.0.22 allows XSS, with resultant Remote Code Execution, via an overwolfstore:// URL.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. In affected versions it's possible to execute a content with the right of any user via a crafted URL. A user must have `programming` privileges in order to exploit this vulnerability. This issue has been patched in XWiki 14.10.7 and 15.2RC1. Users are advised to upgrade. There are no known workarounds for for this vulnerability.

JupyterLab is a user interface for Project Jupyter which will eventually replace the classic Jupyter Notebook. In affected versions untrusted notebook can execute code on load. In particular JupyterLab doesn’t sanitize the action attribute of html `<form>`. Using this it is possible to trigger the form validation outside of the form itself. This is a remote code execution, but requires user action to open a notebook.

MockServer is open source software which enables easy mocking of any system you integrate with via HTTP or HTTPS. An attacker that can trick a victim into visiting a malicious site while running MockServer locally, will be able to run arbitrary code on the MockServer machine. With an overly broad default CORS configuration MockServer allows any site to send cross-site requests. Additionally, MockServer allows you to create dynamic expectations using Javascript or Velocity templates. Both engines may allow an attacker to execute arbitrary code on-behalf of MockServer. By combining these two issues (Overly broad CORS configuration + Script injection), an attacker could serve a malicious page so that if a developer running MockServer visits it, they will get compromised. For more details including a PoC see the referenced GHSL-2021-059.

Cross Site Scripting Vulnerability in MiniCMS v.1.10 allows attacker to execute arbitrary code via a crafted get request.

A Cross-Site Scripting (XSS) vulnerability exists in Webmin 1.973 via the Scheduled Cron Jobs feature.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. XWiki is vulnerable to reflected cross-site scripting (RXSS) via the `rev` parameter that is used in the content of the content menu without escaping. If an attacker can convince a user to visit a link with a crafted parameter, this allows the attacker to execute arbitrary actions in the name of the user, including remote code (Groovy) execution in the case of a user with programming right, compromising the confidentiality, integrity and availability of the whole XWiki installation. This has been patched in XWiki 15.6 RC1, 15.5.1 and 14.10.14. The patch in commit `04e325d57` can be manually applied without upgrading (or restarting) the instance. Users are advised to upgrade or to manually apply the patch. There are no known workarounds for this vulnerability.

The Jupyter notebook is a web-based notebook environment for interactive computing. In affected versions untrusted notebook can execute code on load. Jupyter Notebook uses a deprecated version of Google Caja to sanitize user inputs. A public Caja bypass can be used to trigger an XSS when a victim opens a malicious ipynb document in Jupyter Notebook. The XSS allows an attacker to execute arbitrary code on the victim computer using Jupyter APIs.

Erxes, an experience operating system (XOS) with a set of plugins, is vulnerable to cross-site scripting in versions 0.22.3 and prior. This results in client-side code execution. The victim must follow a malicious link or be redirected there from malicious web site. There are no known patches.

components/Modals/HelpTexts/GenericAll/GenericAll.jsx in Bloodhound <= 4.0.1 allows remote attackers to execute arbitrary system commands when the victim imports a malicious data file containing JavaScript in the objectId parameter.