A vulnerability, which was classified as critical, has been found in Netgear EX6120 1.0.3.94. Affected by this issue is the function sub_30394. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. This vulnerability affects the function sub_3C8EC. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. This affects the function sub_3C03C. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been classified as critical. This affects the function sub_54014. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, PR2000 before 1.0.0.30, R6020 before 1.0.0.42, R6050 before 1.0.1.22, JR6150 before 1.0.1.22, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R69002 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Certain NETGEAR devices are affected by authentication bypass. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.26, JR6150 before 1.0.1.26, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.66, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, AC2600 before 1.2.0.62, R7450 before 1.2.0.62, and WNR2020 before 1.1.0.62.

NETGEAR JGS516PE devices before 2.6.0.43 are affected by lack of access control at the function level.

Buffer Overflow vulnerability in Netgear- R61 router V1.0.1.28 allows a remote attacker to execute arbitrary code via the QUERY_STRING key value

Netgear DC112A V1.0.0.64 has an OS command injection vulnerability in the usb_adv.cgi, which allows remote attackers to execute arbitrary commands via parameter "deviceName" passed to the binary through a POST request.

Netgear N300 wireless router wnr2000v4-V1.0.0.70 is vulnerable to Buffer Overflow via uhttpd. There is a stack overflow vulnerability caused by strcpy.

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

Certain NETGEAR devices are affected by SQL injection. This affects D3600 before 1.0.0.68, D6000 before 1.0.0.68, D6200 before 1.1.00.28, D6220 before 1.0.0.40, D6400 before 1.0.0.74, D7000 before 1.0.1.60, D7000v2 before 1.0.0.74, D7800 before 1.0.1.34, D8500 before 1.0.3.39, DC112A before 1.0.0.40, EX8000 before 1.0.0.118, JR6150 before 1.0.1.18, R6050 before 1.0.1.18, R6220 before 1.1.0.66, R6250 before 1.0.4.26, R6300v2 before 1.0.4.24, R6400 before 1.0.1.36, R6400v2 before 1.0.2.52, R6700 before 1.0.1.44, R6700v2 before 1.2.0.16, R6800 before 1.2.0.16, R6900v2 before 1.2.0.16, R6900 before 1.0.1.44, R7000 before 1.0.9.26, R6900P before 1.3.0.20, R7000P before 1.3.0.20, R7100LG before 1.0.0.40, R7300DST before 1.0.0.62, R7500 before 1.0.0.118, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R7900 before 1.0.2.10, R8000 before 1.0.4.12, R7900P before 1.3.0.10, R8000P before 1.3.0.10, R8300 before 1.0.2.116, R8500 before 1.0.2.116, R8900 before 1.0.3.6, R9000 before 1.0.3.10, WNDR3700v4 before 1.0.2.102, WNDR3700v5 before 1.1.0.54, WNDR4300v1 before 1.0.2.98, WNDR4300v2 before 1.0.0.56, and WNDR4500v3 before 1.0.0.56.

NETGEAR MR1100 devices before 12.06.08.00 are affected by lack of access control at the function level.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects GS105Ev2 before 1.6.0.4, GS105PE before 1.6.0.4, GS408EPP before 1.0.0.15, GS808E before 1.7.0.7, GS908E before 1.7.0.3, GSS108E before 1.6.0.4, and GSS108EPP before 1.0.0.15.

NETGEAR RAX40 devices before 1.0.3.64 are affected by disclosure of administrative credentials.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. Multiple actions within the web management interface (setup.cgi) are vulnerable to command injection, allowing remote attackers to execute arbitrary commands, as demonstrated by shell metacharacters in the sysDNSHost parameter.

Buffer Overflow vulnerability in NETGEAR R6400v2 before version 1.0.4.118, allows remote unauthenticated attackers to execute arbitrary code via crafted URL to httpd.

netgear R6250 Firmware Version 1.0.4.48 is vulnerable to Buffer Overflow after authentication.

Certain NETGEAR devices allow unauthenticated access to critical .cgi and .htm pages via a substring ending with .jpg, such as by appending ?x=1.jpg to a URL. This affects MBR1515, MBR1516, DGN2200, DGN2200M, DGND3700, WNR2000v2, WNDR3300, WNDR3400, WNR3500, and WNR834Bv2.

NETGEAR ProSafe SSL VPN firmware FVS336Gv2 and FVS336Gv3 was discovered to contain a SQL injection vulnerability via USERDBDomains.Domainname at cgi-bin/platform.cgi.

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses HTTP Basic Authentication over cleartext HTTP.

In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.

In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point.

Netgear R7000P V1.3.0.8, V1.3.1.64 is vulnerable to Buffer Overflow via parameters: stamode_dns1_pri and stamode_dns1_sec.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter pppoe_peer_mac and forcing a reboot. This will result in command injection.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface.

Netgear Inc WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the parse_st_header function due to use of a request header parameter in a strncpy where size is determined based on the input specified. By sending a specially crafted packet, an attacker can take control of the program counter and hijack control flow of the program to execute arbitrary system commands.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D6400 before 1.0.0.78, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6250 before 1.0.4.8, R6300v2 before 1.0.4.6, R6400 before 1.0.1.12, R6700 before 1.0.1.16, R7000 before 1.0.7.10, R7100LG before 1.0.0.42, R7300DST before 1.0.0.44, R7900 before 1.0.1.12, R8000 before 1.0.3.36, R8300 before 1.0.2.74, R8500 before 1.0.2.74, WNDR3400v3 before 1.0.1.14, and WNR3500Lv2 before 1.2.0.48.

Certain NETGEAR devices are affected by a hardcoded password. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D7800 before 1.0.1.34, R7800 before 1.0.2.46, and R9000 before 1.0.3.16.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6700 before 1.0.1.48, R7900 before 1.0.2.16, R6900 before 1.0.1.48, R7000P before 1.3.1.44, R6900P before 1.3.1.44, R6250 before 1.0.4.30, R6300v2 before 1.0.4.32, R6400 before 1.0.1.44, R6400v2 before 1.0.2.60, R7000 before 1.0.9.34, R7100LG before 1.0.0.48, R7300 before 1.0.0.68, R8000 before 1.0.4.18, R8000P before 1.4.1.24, R7900P before 1.4.1.24, R8500 before 1.0.2.122, R8300 before 1.0.2.122, WN2500RPv2 before 1.0.1.54, EX3700 before 1.0.0.72, EX3800 before 1.0.0.72, EX6000 before 1.0.0.32, EX6100 before 1.0.2.24, EX6120 before 1.0.0.42, EX6130 before 1.0.0.24, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, D7000v2 before 1.0.0.51, D6220 before 1.0.0.46, D6400 before 1.0.0.82, and D8500 before 1.0.3.42.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, EX2700 before 1.0.1.32, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.70, EX6200v2 before 1.0.1.62, EX6400 before 1.0.1.78, EX7300 before 1.0.1.62, EX8000 before 1.0.0.114, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WN2000RPTv3 before 1.0.1.26, WN3000RPv2 before 1.0.0.56, WN3000RPv3 before 1.0.2.66, WN3100RPv2 before 1.0.0.56, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.

Certain NETGEAR devices are affected by weak cryptography. This affects D7000v2 before 1.0.0.62, D8500 before 1.0.3.50, EX3700 before 1.0.0.84, EX3800 before 1.0.0.84, EX6120 before 1.0.0.54, EX6130 before 1.0.0.36, EX7000 before 1.0.1.90, R6250 before 1.0.4.42, R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R6900P before 1.3.2.124, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7100LG before 1.0.0.56, R7900 before 1.0.4.26, R8000 before 1.0.4.58, R8300 before 1.0.2.134, R8500 before 1.0.2.134, RS400 before 1.5.0.48, WNR3500Lv2 before 1.2.0.62, and XR300 before 1.0.3.50.

NETGEAR D7000 devices before 1.0.1.82 are affected by authentication bypass.

Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, and RBR850 before 3.2.17.12.

Certain NETGEAR devices are affected by authentication bypass. This affects AC2100 before 2021-08-27, AC2400 before 2021-08-27, AC2600 before 2021-08-27, D7000 before 2021-08-27, R6220 before 2021-08-27, R6230 before 2021-08-27, R6260 before 2021-08-27, R6330 before 2021-08-27, R6350 before 2021-08-27, R6700v2 before 2021-08-27, R6800 before 2021-08-27, R6850 before 2021-08-27, R6900v2 before 2021-08-27, R7200 before 2021-08-27, R7350 before 2021-08-27, R7400 before 2021-08-27, and R7450 before 2021-08-27.

Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.66, D6400 before 1.0.0.100, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.52, DGN2200v4 before 1.0.0.118, EAX80 before 1.0.1.64, R6250 before 1.0.4.48, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R7960P before 1.4.1.64, R8000 before 1.0.4.62, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, R6400v2 before 1.0.4.106, R7000P before 1.3.2.132, R8000P before 1.4.1.64, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, R6700v3 before 1.0.4.106, R6900P before 1.3.2.132, R7900P before 1.4.1.64, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.3.106.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6250 before 1.0.4.48, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7900 before 1.0.4.38, R8300 before 1.0.2.144, R8500 before 1.0.2.144, XR300 before 1.0.3.68, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects DC112A before 1.0.0.52, R6400 before 1.0.1.68, RAX200 before 1.0.3.106, WNDR3400v3 before 1.0.1.38, XR300 before 1.0.3.68, R8500 before 1.0.2.144, RAX75 before 1.0.3.106, R8300 before 1.0.2.144, and RAX80 before 1.0.3.106.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6260 before 1.1.0.76, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, and AC2600 before 1.2.0.62.

NETGEAR D7000 devices before 1.0.1.68 are affected by authentication bypass.

Certain D-Link, Edimax, NETGEAR, TP-Link, Tenda, and Western Digital devices are affected by an integer overflow by an unauthenticated attacker. Remote code execution from the WAN interface (TCP port 20005) cannot be ruled out; however, exploitability was judged to be of "rather significant complexity" but not "impossible." The overflow is in SoftwareBus_dispatchNormalEPMsgOut in the KCodes NetUSB kernel module. Affected NETGEAR devices are D7800 before 1.0.1.68, R6400v2 before 1.0.4.122, and R6700v3 before 1.0.4.122.

Certain NETGEAR devices are affected by authentication bypass. This affects RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, RBS850 before 3.2.10.11, CBR40 before 2.5.0.10, EAX20 before 1.0.0.48, MK62 before 1.0.6.110, MR60 before 1.0.6.110, MS60 before 1.0.6.110, RBK752 before 3.2.10.10, RBR750 before 3.2.10.10, and RBS750 before 3.2.10.10.

NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.

ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request.

NETGEAR WAC104 devices before 1.0.4.15 are affected by an authentication bypass vulnerability in /usr/sbin/mini_httpd, allowing an unauthenticated attacker to invoke any action by adding the &currentsetting.htm substring to the HTTP query, a related issue to CVE-2020-27866. This directly allows the attacker to change the web UI password, and eventually to enable debug mode (telnetd) and gain a shell on the device as the admin limited-user account (however, escalation to root is simple because of weak permissions on the /etc/ directory).