Kafka UI is an Open-Source Web UI for Apache Kafka Management. Kafka UI API allows users to connect to different Kafka brokers by specifying their network address and port. As a separate feature, it also provides the ability to monitor the performance of Kafka brokers by connecting to their JMX ports. JMX is based on the RMI protocol, so it is inherently susceptible to deserialization attacks. A potential attacker can exploit this feature by connecting Kafka UI backend to its own malicious broker. This vulnerability affects the deployments where one of the following occurs: 1. dynamic.config.enabled property is set in settings. It's not enabled by default, but it's suggested to be enabled in many tutorials for Kafka UI, including its own README.md. OR 2. an attacker has access to the Kafka cluster that is being connected to Kafka UI. In this scenario the attacker can exploit this vulnerability to expand their access and execute code on Kafka UI as well. Instead of setting up a legitimate JMX port, an attacker can create an RMI listener that returns a malicious serialized object for any RMI call. In the worst case it could lead to remote code execution as Kafka UI has the required gadget chains in its classpath. This issue may lead to post-auth remote code execution. This is particularly dangerous as Kafka-UI does not have authentication enabled by default. This issue has been addressed in version 0.7.2. All users are advised to upgrade. There are no known workarounds for this vulnerability. These issues were discovered and reported by the GitHub Security lab and is also tracked as GHSL-2023-230.

Claude Code is an agentic coding tool. Prior to version 2.0.72, due to an error in command parsing, it was possible to bypass the Claude Code confirmation prompt to trigger execution of untrusted commands through the find command. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This issue has been patched in version 2.0.72.

CI4MS is a CodeIgniter 4-based CMS skeleton that delivers a production-ready, modular architecture with RBAC authorization and theme support. Prior to version 0.28.5.0, an authenticated user with file editor permissions can achieve Remote Code Execution (RCE) by leveraging the file creation and save endpoints, an attacker can upload and execute arbitrary PHP code on the server. This issue has been patched in version 0.28.5.0.

A vulnerability has been found in composiohq composio up to 0.5.6 and classified as critical. Affected by this vulnerability is the function Calculator of the file python/composio/tools/local/mathematical/actions/calculator.py. The manipulation leads to code injection. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Erugo is a self-hosted file-sharing platform. In versions up to and including 0.2.14, an authenticated low-privileged user can upload arbitrary files to any specified location due to insufficient validation of user‑supplied paths when creating shares. By specifying a writable path within the public web root, an attacker can upload and execute arbitrary code on the server, resulting in remote code execution (RCE). This vulnerability allows a low-privileged user to fully compromise the affected Erugo instance. Version 0.2.15 fixes the issue.

AutoGPT is a platform that allows users to create, deploy, and manage continuous artificial intelligence agents that automate complex workflows. Prior to autogpt-platform-beta-v0.6.44, AutoGPT Platform's block execution endpoints (both main web API and external API) allow executing blocks by UUID without checking the `disabled` flag. Any authenticated user can execute the disabled `BlockInstallationBlock`, which writes arbitrary Python code to the server filesystem and executes it via `__import__()`, achieving Remote Code Execution. In default self-hosted deployments where Supabase signup is enabled, an attacker can self-register; if signup is disabled (e.g., hosted), the attacker needs an existing account. autogpt-platform-beta-v0.6.44 contains a fix.

The SQL Expressions experimental feature of Grafana allows for the evaluation of `duckdb` queries containing user input. These queries are insufficiently sanitized before being passed to `duckdb`, leading to a command injection and local file inclusion vulnerability. Any user with the VIEWER or higher permission is capable of executing this attack. The `duckdb` binary must be present in Grafana's $PATH for this attack to function; by default, this binary is not installed in Grafana distributions.

The Frontend Dashboard plugin for WordPress is vulnerable to unauthorized code execution due to insufficient filtering on callable methods/functions via the ajax_request() function in all versions up to, and including, 2.2.4. This makes it possible for authenticated attackers, with subscriber-level access and above, to call arbitrary functions that can be leverage for privilege escalation by changing user's passwords.

Yoke is a Helm-inspired infrastructure-as-code (IaC) package deployer. In 0.19.0 and earlier, a vulnerability exists in the Air Traffic Controller (ATC) component of Yoke. It allows users with CR create/update permissions to execute arbitrary WASM code in the ATC controller context by injecting a malicious URL through the overrides.yoke.cd/flight annotation. The ATC controller downloads and executes the WASM module without proper URL validation, enabling attackers to create arbitrary Kubernetes resources or potentially escalate privileges to cluster-admin level.

PHP Everywhere <= 2.0.3 included functionality that allowed execution of PHP Code Snippets via WordPress shortcodes, which can be used by any authenticated user.

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.5.7 and 1.6.2, EnvoyExtensionPolicy Lua scripts executed by Envoy proxy can be used to leak the proxy's credentials. These credentials can then be used to communicate with the control plane and gain access to all secrets that are used by Envoy proxy, e.g. TLS private keys and credentials used for downstream and upstream communication. This vulnerability is fixed in 1.5.7 and 1.6.2.

An authenticated remote code execution vulnerability in QStar Archive Solutions Release RELEASE_3-0 Build 7 Patch 0 allows attackers to arbitrarily execute commands.

Code injection via nginx.ingress.kubernetes.io/permanent-redirect annotation.

Improper Control of Generation of Code ('Code Injection') vulnerability in Soft8Soft LLC Verge3D Publishing and E-Commerce.This issue affects Verge3D Publishing and E-Commerce: from n/a through 4.5.2.

The Custom Block Builder – Lazy Blocks plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.2.0 via multiple functions in the 'LazyBlocks_Blocks' class. This makes it possible for authenticated attackers, with Contributor-level access and above, to execute code on the server.

A vulnerability was detected in abhiphile fermat-mcp up to 47f11def1cd37e45dd060f30cdce346cbdbd6f0a. This vulnerability affects the function eqn_chart of the file fmcp/mpl_mcp/core/eqn_chart.py. Performing a manipulation of the argument equations results in code injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

Malicious code injection in Apache Ambari in prior to 2.7.8. Users are recommended to upgrade to version 2.7.8, which fixes this issue. Impact: A Cluster Operator can manipulate the request by adding a malicious code injection and gain a root over the cluster main host.

Ballcat Codegen provides the function of online editing code to generate templates. In versions prior to 1.0.0.beta.2, attackers can implement remote code execution through malicious code injection of the template engine. This happens because Velocity and freemarker templates are introduced but input verification is not done. The fault is rectified in version 1.0.0.beta.2.

Improper Control of Generation of Code ('Code Injection') vulnerability in Qode Interactive Qode Essential Addons.This issue affects Qode Essential Addons: from n/a through 1.5.2.

An issue discovered in OpenCart 4.0.0.0 to 4.0.2.3 allows authenticated backend users having common/security write privilege can write arbitrary untrusted data inside config.php and admin/config.php, resulting in remote code execution on the underlying server.

Combodo iTop is a web based IT Service Management tool. In versions prior to 2.7.6 and 3.0.0, users of the iTop user portal can send TWIG code to the server by forging specific http queries, and execute arbitrary code on the server using http server user privileges. This issue is fixed in versions 2.7.6 and 3.0.0. There are currently no known workarounds.

PHP Everywhere <= 2.0.3 included functionality that allowed execution of PHP Code Snippets via a WordPress gutenberg block by any user able to edit posts.

The serialize function used to compile MDX in next-mdx-remote is vulnerable to arbitrary code execution due to insufficient sanitization of MDX content. This vulnerability, CVE-2026-0969, is fixed in next-mdx-remote 6.0.0.

HotelDruid v3.0.3 was discovered to contain a remote code execution (RCE) vulnerability which is exploited via an attacker inserting a crafted payload into the name field under the Create New Room module.

Twig is an open source template language for PHP. When in a sandbox mode, the `arrow` parameter of the `sort` filter must be a closure to avoid attackers being able to run arbitrary PHP functions. In affected versions this constraint was not properly enforced and could lead to code injection of arbitrary PHP code. Patched versions now disallow calling non Closure in the `sort` filter as is the case for some other filters. Users are advised to upgrade.

The Better Find and Replace – AI-Powered Suggestions plugin for WordPress is vulnerable to Limited Code Injection in all versions up to, and including, 1.7.7. This is due to insufficient input validation and restriction on the 'rtafar_ajax' function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to call arbitrary plugin functions and execute code within those functions.

Improper Control of Generation of Code ('Code Injection') vulnerability in TienCOP WP EXtra.This issue affects WP EXtra: from n/a through 6.2.

A vulnerability in the SOAP API endpoint of Cisco Unified Communications Manager, Cisco Unified Communications Manager Session Management Edition, Cisco Unified Communications Manager IM &amp; Presence Service, Cisco Unity Connection, and Cisco Prime License Manager could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper sanitization of user-supplied input. An attacker could exploit this vulnerability by sending a SOAP API request with crafted parameters to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying Linux operating system of the affected device.

The File Manager Pro plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation and capability checks in the mk_file_folder_manager AJAX action in all versions up to, and including, 8.3.7. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible.

Code Injection in GitHub repository dolibarr/dolibarr prior to 15.0.1.

A flaw was found in CRI-O in the way it set kernel options for a pod. This issue allows anyone with rights to deploy a pod on a Kubernetes cluster that uses the CRI-O runtime to achieve a container escape and arbitrary code execution as root on the cluster node, where the malicious pod was deployed.

OpenPLC v3 contains an authenticated remote code execution vulnerability that allows attackers with valid credentials to inject malicious code through the hardware configuration interface. Attackers can upload a custom hardware layer with embedded reverse shell code that establishes a network connection to a specified IP and port, enabling remote command execution.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. In affected versions it's possible for a user to execute any content with the right of an existing document's content author, provided the user have edit right on it. A crafted URL of the form ` /xwiki/bin/edit//?content=%7B%7Bgroovy%7D%7Dprintln%28%22Hello+from+Groovy%21%22%29%7B%7B%2Fgroovy%7D%7D&xpage=view` can be used to execute arbitrary groovy code on the server. This vulnerability has been patched in XWiki versions 14.10.6 and 15.2RC1. Users are advised to update. There are no known workarounds for this issue.

The Image Hotspot by DevVN plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.2.5 via deserialization of untrusted input in the 'devvn_ihotspot_shortcode_func' function. This makes it possible for authenticated attackers, with Author-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code.

A vulnerability was found in Elefant CMS 1.3.12-RC. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /designer/add/layout. The manipulation leads to code injection. The attack can be launched remotely. Upgrading to version 1.3.13 is able to address this issue. It is recommended to upgrade the affected component.

This vulnerability allows an remote attacker with low privileges to misuse Improper Control of Generation of Code ('Code Injection') to gain full control of the affected device.

piwigo 11.5.0 is affected by a remote code execution (RCE) vulnerability in the LocalFiles Editor.

Microsoft SharePoint Server Remote Code Execution Vulnerability

In the add_match function in libbb/lineedit.c in BusyBox through 1.27.2, the tab autocomplete feature of the shell, used to get a list of filenames in a directory, does not sanitize filenames and results in executing any escape sequence in the terminal. This could potentially result in code execution, arbitrary file writes, or other attacks.

Bolt CMS <= 4.2 is vulnerable to Remote Code Execution. Unsafe theme rendering allows an authenticated attacker to edit theme to inject server-side template injection that leads to remote code execution.

Affected versions of Atlassian Confluence Server and Data Center allow users with a valid account on a Confluence Data Center instance to execute arbitrary Java code or run arbitrary system commands by injecting an OGNL payload. The affected versions are before version 6.13.23, from version 6.14.0 before 7.4.11, from version 7.5.0 before 7.11.6, and from version 7.12.0 before 7.12.5.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

An issue in SeaCMS v.12.8 allows an attacker to execute arbitrary code via the admin_ notify.php component.

The kallyas theme for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.24.0 via the `TH_PhpCode` pagebuilder widget. This is due to the theme not restricting access to the code editor widget for non-administrators. This makes it possible for authenticated attackers, with Contributor-level access and above, to execute code on the server.

An HTML injection vulnerability in Amidaware Inc Tactical RMM v1.3.1 and earlier allows authenticated users to inject arbitrary HTML content during the creation of a new agent via the POST /api/v3/newagent/ endpoint. The agent_id parameter accepts up to 255 characters and is improperly sanitized using DOMPurify.sanitize() with the html: true option enabled, which fails to adequately filter HTML input. The injected HTML is rendered in the Tactical RMM management panel when an administrator attempts to remove or shut down the affected agent, potentially leading to client-side attacks such as UI manipulation or phishing. NOTE: the Supplier's position is that this has incorrect information.

XWiki Platform is a generic wiki platform. Starting in 2.3 and prior to versions 14.10.15, 15.5.2, and 15.7-rc-1, anyone who can edit an arbitrary wiki page in an XWiki installation can gain programming right through several cases of missing escaping in the code for displaying sections in the administration interface. This impacts the confidentiality, integrity and availability of the whole XWiki installation. Normally, all users are allowed to edit their own user profile so this should be exploitable by all users of the XWiki instance. This has been fixed in XWiki 14.10.15, 15.5.2 and 15.7RC1. The patches can be manually applied to the `XWiki.ConfigurableClassMacros` and `XWiki.ConfigurableClass` pages.

A flaw was found in Moodle. An attacker with access to the restore interface could trigger server-side execution of arbitrary code. This is due to insufficient validation of restore input, which leads to unintended interpretation by core restore routines. Successful exploitation could result in a full compromise of the Moodle application.

Zenphoto versions prior to 1.5.7 allows an attacker to conduct PHP code injection attacks by leading a user to upload a specially crafted .zip file.

Grav is a file-based Web platform. Prior to 1.8.0-beta.27, a Server-Side Template Injection (SSTI) vulnerability exists in Grav that allows authenticated attackers with editor permissions to execute arbitrary commands on the server and, under certain conditions, may also be exploited by unauthenticated attackers. This vulnerability stems from weak regex validation in the cleanDangerousTwig method. This vulnerability is fixed in 1.8.0-beta.27.

Elysia is a Typescript framework for request validation, type inference, OpenAPI documentation and client-server communication. Versions 1.4.17 and below are subject to arbitrary code execution from cookie config. When dynamic cookies are enabled (e.g. there an existing cookie schema), the cookie config is injected into the compiled route without first being sanitised. Availability of this exploit is generally low, but when combined with GHSA-hxj9-33pp-j2cc, it allows for a full RCE chain. An attack requires write access to either the Elysia app's source code (in which case the vulnerability is meaningless) or write access to the cookie config (perhaps where it is assumed to be provisioned by the environment). This issue is fixed in version 1.4.18.