In the Linux kernel, the following vulnerability has been resolved: ASoC: kirkwood: Fix potential NULL dereference In kirkwood_dma_hw_params() mv_mbus_dram_info() returns NULL if CONFIG_PLAT_ORION macro is not defined. Fix this bug by adding NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Ensure the copied buf is NUL terminated Currently, we allocate a count-sized kernel buffer and copy count from userspace to that buffer. Later, we use kstrtouint on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using kstrtouint. Fix this issue by using memdup_user_nul instead of memdup_user.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due to NULL pointer exception: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000020847ad4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008 CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 ... NIP _find_next_zero_bit+0x24/0x110 LR bitmap_find_next_zero_area_off+0x5c/0xe0 Call Trace: dev_printk_emit+0x38/0x48 (unreliable) iommu_area_alloc+0xc4/0x180 iommu_range_alloc+0x1e8/0x580 iommu_alloc+0x60/0x130 iommu_alloc_coherent+0x158/0x2b0 dma_iommu_alloc_coherent+0x3c/0x50 dma_alloc_attrs+0x170/0x1f0 mlx5_cmd_init+0xc0/0x760 [mlx5_core] mlx5_function_setup+0xf0/0x510 [mlx5_core] mlx5_init_one+0x84/0x210 [mlx5_core] probe_one+0x118/0x2c0 [mlx5_core] local_pci_probe+0x68/0x110 pci_call_probe+0x68/0x200 pci_device_probe+0xbc/0x1a0 really_probe+0x104/0x540 __driver_probe_device+0xb4/0x230 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x130 driver_attach+0x34/0x50 bus_add_driver+0x16c/0x300 driver_register+0xa4/0x1b0 __pci_register_driver+0x68/0x80 mlx5_init+0xb8/0x100 [mlx5_core] do_one_initcall+0x60/0x300 do_init_module+0x7c/0x2b0 At the time of LPAR dump, before kexec hands over control to kdump kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT. For the SR-IOV case, default DMA window "ibm,dma-window" is removed from the FDT and DDW added, for the device. Now, kexec hands over control to the kdump kernel. When the kdump kernel initializes, PCI busses are scanned and IOMMU group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV case, there is no "ibm,dma-window". The original commit: b1fc44eaa9ba, fixes the path where memory is pre-mapped (direct mapped) to the DDW. When TCEs are direct mapped, there is no need to initialize IOMMU tables. iommu_table_setparms_lpar() only considers "ibm,dma-window" property when initiallizing IOMMU table. In the scenario where TCEs are dynamically allocated for SR-IOV, newly created IOMMU table is not initialized. Later, when the device driver tries to enter TCEs for the SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc(). The fix is to initialize the IOMMU table with DDW property stored in the FDT. There are 2 points to remember: 1. For the dedicated adapter, kdump kernel would encounter both default and DDW in FDT. In this case, DDW property is used to initialize the IOMMU table. 2. A DDW could be direct or dynamic mapped. kdump kernel would initialize IOMMU table and mark the existing DDW as "dynamic". This works fine since, at the time of table initialization, iommu_table_clear() makes some space in the DDW, for some predefined number of TCEs which are needed for kdump to succeed.

An issue was discovered in the Linux kernel before 5.2. There is a NULL pointer dereference in tw5864_handle_frame() in drivers/media/pci/tw5864/tw5864-video.c, which may cause denial of service, aka CID-2e7682ebfc75.

A null pointer dereference vulnerability was found in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() in drivers/net/wireless/ath/ath10k/wmi-tlv.c in the Linux kernel. This issue could be exploited to trigger a denial of service.

In the Linux kernel, the following vulnerability has been resolved: usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations.

A NULL pointer dereference flaw was found in the Linux kernel's GPU Nouveau driver functionality in versions prior to 5.12-rc1 in the way the user calls ioctl DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC. This flaw allows a local user to crash the system.

The Linux kernel before version 5.8 is vulnerable to a NULL pointer dereference in drivers/tty/serial/8250/8250_core.c:serial8250_isa_init_ports() that allows local users to cause a denial of service by using the p->serial_in pointer which uninitialized.

A denial of service (DOS) issue was found in the Linux kernel’s smb2_ioctl_query_info function in the fs/cifs/smb2ops.c Common Internet File System (CIFS) due to an incorrect return from the memdup_user function. This flaw allows a local, privileged (CAP_SYS_ADMIN) attacker to crash the system.

A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.

A NULL pointer dereference issue was found in the gfs2 file system in the Linux kernel. It occurs on corrupt gfs2 file systems when the evict code tries to reference the journal descriptor structure after it has been freed and set to NULL. A privileged local user could use this flaw to cause a kernel panic.

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Fix kernel panic after setting hsuid Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccw ---truncated---

A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

The cirrus_invalidate_region function in hw/display/cirrus_vga.c in Qemu allows local OS guest privileged users to cause a denial of service (out-of-bounds array access and QEMU process crash) via vectors related to negative pitch.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix freeing unallocated p2pmem In case p2p device was found but the p2p pool is empty, the nvme target is still trying to free the sgl from the p2p pool instead of the regular sgl pool and causing a crash (BUG() is called). Instead, assign the p2p_dev for the request only if it was allocated from p2p pool. This is the crash that was caused: [Sun May 30 19:13:53 2021] ------------[ cut here ]------------ [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! [Sun May 30 19:13:53 2021] invalid opcode: 0000 [#1] SMP PTI ... [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! ... [Sun May 30 19:13:53 2021] RIP: 0010:gen_pool_free_owner+0xa8/0xb0 ... [Sun May 30 19:13:53 2021] Call Trace: [Sun May 30 19:13:53 2021] ------------[ cut here ]------------ [Sun May 30 19:13:53 2021] pci_free_p2pmem+0x2b/0x70 [Sun May 30 19:13:53 2021] pci_p2pmem_free_sgl+0x4f/0x80 [Sun May 30 19:13:53 2021] nvmet_req_free_sgls+0x1e/0x80 [nvmet] [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! [Sun May 30 19:13:53 2021] nvmet_rdma_release_rsp+0x4e/0x1f0 [nvmet_rdma] [Sun May 30 19:13:53 2021] nvmet_rdma_send_done+0x1c/0x60 [nvmet_rdma]

It was discovered that aufs improperly managed inode reference counts in the vfsub_dentry_open() method. A local attacker could use this vulnerability to cause a denial of service attack.

Integer overflow in the net_tx_pkt_init function in hw/net/net_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (QEMU process crash) via the maximum fragmentation count, which triggers an unchecked multiplication and NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix scv instruction crash with kexec kexec on pseries disables AIL (reloc_on_exc), required for scv instruction support, before other CPUs have been shut down. This means they can execute scv instructions after AIL is disabled, which causes an interrupt at an unexpected entry location that crashes the kernel. Change the kexec sequence to disable AIL after other CPUs have been brought down. As a refresher, the real-mode scv interrupt vector is 0x17000, and the fixed-location head code probably couldn't easily deal with implementing such high addresses so it was just decided not to support that interrupt at all.

In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn't so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don't allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to >16 TB.

A deadlock issue was found in the AHCI controller device of QEMU. It occurs on a software reset (ahci_reset_port) while handling a host-to-device Register FIS (Frame Information Structure) packet from the guest. A privileged user inside the guest could use this flaw to hang the QEMU process on the host, resulting in a denial of service condition. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq Undefined behavior is triggered when bnxt_qplib_alloc_init_hwq is called with hwq_attr->aux_depth != 0 and hwq_attr->aux_stride == 0. In that case, "roundup_pow_of_two(hwq_attr->aux_stride)" gets called. roundup_pow_of_two is documented as undefined for 0. Fix it in the one caller that had this combination. The undefined behavior was detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 24 PID: 1075 Comm: (udev-worker) Not tainted 6.9.0-rc6+ #4 Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.7 10/25/2023 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x30 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xec __roundup_pow_of_two+0x25/0x35 [bnxt_re] bnxt_qplib_alloc_init_hwq+0xa1/0x470 [bnxt_re] bnxt_qplib_create_qp+0x19e/0x840 [bnxt_re] bnxt_re_create_qp+0x9b1/0xcd0 [bnxt_re] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kmalloc+0x1b6/0x4f0 ? create_qp.part.0+0x128/0x1c0 [ib_core] ? __pfx_bnxt_re_create_qp+0x10/0x10 [bnxt_re] create_qp.part.0+0x128/0x1c0 [ib_core] ib_create_qp_kernel+0x50/0xd0 [ib_core] create_mad_qp+0x8e/0xe0 [ib_core] ? __pfx_qp_event_handler+0x10/0x10 [ib_core] ib_mad_init_device+0x2be/0x680 [ib_core] add_client_context+0x10d/0x1a0 [ib_core] enable_device_and_get+0xe0/0x1d0 [ib_core] ib_register_device+0x53c/0x630 [ib_core] ? srso_alias_return_thunk+0x5/0xfbef5 bnxt_re_probe+0xbd8/0xe50 [bnxt_re] ? __pfx_bnxt_re_probe+0x10/0x10 [bnxt_re] auxiliary_bus_probe+0x49/0x80 ? driver_sysfs_add+0x57/0xc0 really_probe+0xde/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8f/0xe0 bus_add_driver+0x146/0x220 driver_register+0x72/0xd0 __auxiliary_driver_register+0x6e/0xd0 ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] bnxt_re_mod_init+0x3e/0xff0 [bnxt_re] ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] do_one_initcall+0x5b/0x310 do_init_module+0x90/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x121/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x82/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode_prepare+0x149/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode+0x75/0x230 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x8e/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? __count_memcg_events+0x69/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events.constprop.0+0x1a/0x30 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1f0/0x300 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x34e/0x640 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4e5132821d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 db 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffca9c906a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000563ec8a8f130 RCX: 00007f4e5132821d RDX: 0000000000000000 RSI: 00007f4e518fa07d RDI: 000000000000003b RBP: 00007ffca9c90760 R08: 00007f4e513f6b20 R09: 00007ffca9c906f0 R10: 0000563ec8a8faa0 R11: 0000000000000246 R12: 00007f4e518fa07d R13: 0000000000020000 R14: 0000563ec8409e90 R15: 0000563ec8a8fa60 </TASK> ---[ end trace ]---

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr() vgic_v2_parse_attr() is responsible for finding the vCPU that matches the user-provided CPUID, which (of course) may not be valid. If the ID is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled gracefully. Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id() actually returns something and fail the ioctl if not.

A flaw was found in the Linux kernel in the function hid_debug_events_read() in drivers/hid/hid-debug.c file which may enter an infinite loop with certain parameters passed from a userspace. A local privileged user ("root") can cause a system lock up and a denial of service. Versions from v4.18 and newer are vulnerable.

In the Linux kernel, the following vulnerability has been resolved: nbd: always initialize struct msghdr completely syzbot complains that msg->msg_get_inq value can be uninitialized [1] struct msghdr got many new fields recently, we should always make sure their values is zero by default. [1] BUG: KMSAN: uninit-value in tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571 tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571 inet_recvmsg+0x131/0x580 net/ipv4/af_inet.c:879 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x12b/0x1e0 net/socket.c:1066 __sock_xmit+0x236/0x5c0 drivers/block/nbd.c:538 nbd_read_reply drivers/block/nbd.c:732 [inline] recv_work+0x262/0x3100 drivers/block/nbd.c:863 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2700 worker_thread+0xf45/0x1490 kernel/workqueue.c:2781 kthread+0x3ed/0x540 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 Local variable msg created at: __sock_xmit+0x4c/0x5c0 drivers/block/nbd.c:513 nbd_read_reply drivers/block/nbd.c:732 [inline] recv_work+0x262/0x3100 drivers/block/nbd.c:863 CPU: 1 PID: 7465 Comm: kworker/u5:1 Not tainted 6.7.0-rc7-syzkaller-00041-gf016f7547aee #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: nbd5-recv recv_work

In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: avoid deadlock on delete association path When deleting an association the shutdown path is deadlocking because we try to flush the nvmet_wq nested. Avoid this by deadlock by deferring the put work into its own work item.

In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Fix addr error caused by page alignment In kasan_init_region, when k_start is not page aligned, at the begin of for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then `va = block + k_cur - k_start` is less than block, the addr va is invalid, because the memory address space from va to block is not alloced by memblock_alloc, which will not be reserved by memblock_reserve later, it will be used by other places. As a result, memory overwriting occurs. for example: int __init __weak kasan_init_region(void *start, size_t size) { [...] /* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */ block = memblock_alloc(k_end - k_start, PAGE_SIZE); [...] for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) { /* at the begin of for loop * block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400) * va(dcd96c00) is less than block(dcd97000), va is invalid */ void *va = block + k_cur - k_start; [...] } [...] } Therefore, page alignment is performed on k_start before memblock_alloc() to ensure the validity of the VA address.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Lock external INTx masking ops Mask operations through config space changes to DisINTx may race INTx configuration changes via ioctl. Create wrappers that add locking for paths outside of the core interrupt code. In particular, irq_type is updated holding igate, therefore testing is_intx() requires holding igate. For example clearing DisINTx from config space can otherwise race changes of the interrupt configuration. This aligns interfaces which may trigger the INTx eventfd into two camps, one side serialized by igate and the other only enabled while INTx is configured. A subsequent patch introduces synchronization for the latter flows.

The address_space_write_continue function in exec.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (out-of-bounds access and guest instance crash) by leveraging use of qemu_map_ram_ptr to access guest ram block area.

A flaw was found in the Netfilter subsystem of the Linux kernel. A race condition between IPSET_CMD_ADD and IPSET_CMD_SWAP can lead to a kernel panic due to the invocation of `__ip_set_put` on a wrong `set`. This issue may allow a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix double free err_addr pointer warnings In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages will be run many times so that double free err_addr in some special case. So set the err_addr to NULL to avoid the warnings.

A memory leak problem was found in ctnetlink_create_conntrack in net/netfilter/nf_conntrack_netlink.c in the Linux Kernel. This issue may allow a local attacker with CAP_NET_ADMIN privileges to cause a denial of service (DoS) attack due to a refcount overflow.

A memory leak in the predicate_parse() function in kernel/trace/trace_events_filter.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption), aka CID-96c5c6e6a5b6.

Four memory leaks in the acp_hw_init() function in drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c in the Linux kernel before 5.3.8 allow attackers to cause a denial of service (memory consumption) by triggering mfd_add_hotplug_devices() or pm_genpd_add_device() failures, aka CID-57be09c6e874. NOTE: third parties dispute the relevance of this because the attacker must already have privileges for module loading

In the Linux kernel 5.3.11, mounting a crafted btrfs image twice can cause an rwsem_down_write_slowpath use-after-free because (in rwsem_can_spin_on_owner in kernel/locking/rwsem.c) rwsem_owner_flags returns an already freed pointer,

A memory leak in the mlx5_fpga_conn_create_cq() function in drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering mlx5_vector2eqn() failures, aka CID-c8c2a057fdc7.

In the Linux kernel, the following vulnerability has been resolved: PCI: switchtec: Fix stdev_release() crash after surprise hot remove A PCI device hot removal may occur while stdev->cdev is held open. The call to stdev_release() then happens during close or exit, at a point way past switchtec_pci_remove(). Otherwise the last ref would vanish with the trailing put_device(), just before return. At that later point in time, the devm cleanup has already removed the stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause a fatal page fault, and the subsequent dma_free_coherent(), if reached, would pass a stale &stdev->pdev->dev pointer. Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent future accidents. Reproducible via the script at https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix htt pktlog locking The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction New elements in this transaction might expired before such transaction ends. Skip sync GC for such elements otherwise commit path might walk over an already released object. Once transaction is finished, async GC will collect such expired element.

In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix delete_endpoint() vs parent unregistration race The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of ports (struct cxl_port objects) between an endpoint and the root of a CXL topology. Each port including the endpoint port is attached to the cxl_port driver. Given that setup, it follows that when either any port in that lineage goes through a cxl_port ->remove() event, or the memdev goes through a cxl_mem ->remove() event. The hierarchy below the removed port, or the entire hierarchy if the memdev is removed needs to come down. The delete_endpoint() callback is careful to check whether it is being called to tear down the hierarchy, or if it is only being called to teardown the memdev because an ancestor port is going through ->remove(). That care needs to take the device_lock() of the endpoint's parent. Which requires 2 bugs to be fixed: 1/ A reference on the parent is needed to prevent use-after-free scenarios like this signature: BUG: spinlock bad magic on CPU#0, kworker/u56:0/11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023 Workqueue: cxl_port detach_memdev [cxl_core] RIP: 0010:spin_bug+0x65/0xa0 Call Trace: do_raw_spin_lock+0x69/0xa0 __mutex_lock+0x695/0xb80 delete_endpoint+0xad/0x150 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 detach_memdev+0x15/0x20 [cxl_core] process_one_work+0x1e3/0x4c0 worker_thread+0x1dd/0x3d0 2/ In the case of RCH topologies, the parent device that needs to be locked is not always @port->dev as returned by cxl_mem_find_port(), use endpoint->dev.parent instead.

An issue was discovered in the Linux kernel before 5.0.19. There is an out-of-bounds array access in __xfrm_policy_unlink, which will cause denial of service, because verify_newpolicy_info in net/xfrm/xfrm_user.c mishandles directory validation.

IBM Db2 11.5 could allow a local user with special privileges to cause a denial of service during database deactivation on DPF. IBM X-Force ID: 261607.

A vulnerability was found in the Linux kernel's KVM subsystem in arch/x86/kvm/lapic.c kvm_free_lapic when a failure allocation was detected. In this flaw the KVM subsystem may crash the kernel due to mishandling of memory errors that happens during VCPU construction, which allows an attacker with special user privilege to cause a denial of service. This flaw affects kernel versions prior to 5.15 rc7.

In the Linux kernel, the following vulnerability has been resolved: Input: cyapa - add missing input core locking to suspend/resume functions Grab input->mutex during suspend/resume functions like it is done in other input drivers. This fixes the following warning during system suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]---

The pcnet_rdra_addr function in hw/net/pcnet.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by setting the (1) receive or (2) transmit descriptor ring length to 0.

A denial of service problem was found, due to a possible recursive locking scenario, resulting in a deadlock in table_clear in drivers/md/dm-ioctl.c in the Linux Kernel Device Mapper-Multipathing sub-component.

The mcf_fec_do_tx function in hw/net/mcf_fec.c in QEMU (aka Quick Emulator) does not properly limit the buffer descriptor count when transmitting packets, which allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via vectors involving a buffer descriptor with a length of 0 and crafted values in bd.flags.

The pvscsi_ring_pop_req_descr function in hw/scsi/vmw_pvscsi.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by leveraging failure to limit process IO loop to the ring size.

The net_tx_pkt_do_sw_fragmentation function in hw/net/net_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a zero length for the current fragment length.