In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Implement refcount to handle unbind during busy driver support indirect read and indirect write operation with assumption no force device removal(unbind) operation. However force device removal(removal) is still available to root superuser. Unbinding driver during operation causes kernel crash. This changes ensure driver able to handle such operation for indirect read and indirect write by implementing refcount to track attached devices to the controller and gracefully wait and until attached devices remove operation completed before proceed with removal operation.
In the Linux kernel, the following vulnerability has been resolved: PCI: Fix link speed calculation on retrain failure When pcie_failed_link_retrain() fails to retrain, it tries to revert to the previous link speed. However it calculates that speed from the Link Control 2 register without masking out non-speed bits first. PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in pcie_set_target_speed(): pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s pci 0000:00:01.1: retraining failed WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000 pcie_failed_link_retrain pci_device_add pci_scan_single_device Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN. [bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de]
In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered If a synchronous error is detected as a result of user-space process triggering a 2-bit uncorrected error, the CPU will take a synchronous error exception such as Synchronous External Abort (SEA) on Arm64. The kernel will queue a memory_failure() work which poisons the related page, unmaps the page, and then sends a SIGBUS to the process, so that a system wide panic can be avoided. However, no memory_failure() work will be queued when abnormal synchronous errors occur. These errors can include situations like invalid PA, unexpected severity, no memory failure config support, invalid GUID section, etc. In such a case, the user-space process will trigger SEA again. This loop can potentially exceed the platform firmware threshold or even trigger a kernel hard lockup, leading to a system reboot. Fix it by performing a force kill if no memory_failure() work is queued for synchronous errors. [ rjw: Changelog edits ]
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid a NULL pointer dereference [WHY] Although unlikely drm_atomic_get_new_connector_state() or drm_atomic_get_old_connector_state() can return NULL. [HOW] Check returns before dereference. (cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)
An issue was discovered in the Linux kernel before 5.8.15. scalar32_min_max_or in kernel/bpf/verifier.c mishandles bounds tracking during use of 64-bit values, aka CID-5b9fbeb75b6a.
In the Linux kernel, the following vulnerability has been resolved: drm/hisilicon/hibmc: fix the hibmc loaded failed bug When hibmc loaded failed, the driver use hibmc_unload to free the resource, but the mutexes in mode.config are not init, which will access an NULL pointer. Just change goto statement to return, because hibnc_hw_init() doesn't need to free anything.
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndev In the TX completion packet stage of TI SoCs with CPSW2G instance, which has single external ethernet port, ndev is accessed without being initialized if no TX packets have been processed. It results into null pointer dereference, causing kernel to crash. Fix this by having a check on the number of TX packets which have been processed.
In the Linux kernel, the following vulnerability has been resolved: net/tcp: Fix a NULL pointer dereference when using TCP-AO with TCP_REPAIR A NULL pointer dereference can occur in tcp_ao_finish_connect() during a connect() system call on a socket with a TCP-AO key added and TCP_REPAIR enabled. The function is called with skb being NULL and attempts to dereference it on tcp_hdr(skb)->seq without a prior skb validation. Fix this by checking if skb is NULL before dereferencing it. The commentary is taken from bpf_skops_established(), which is also called in the same flow. Unlike the function being patched, bpf_skops_established() validates the skb before dereferencing it. int main(void){ struct sockaddr_in sockaddr; struct tcp_ao_add tcp_ao; int sk; int one = 1; memset(&sockaddr,'\0',sizeof(sockaddr)); memset(&tcp_ao,'\0',sizeof(tcp_ao)); sk = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); sockaddr.sin_family = AF_INET; memcpy(tcp_ao.alg_name,"cmac(aes128)",12); memcpy(tcp_ao.key,"ABCDEFGHABCDEFGH",16); tcp_ao.keylen = 16; memcpy(&tcp_ao.addr,&sockaddr,sizeof(sockaddr)); setsockopt(sk, IPPROTO_TCP, TCP_AO_ADD_KEY, &tcp_ao, sizeof(tcp_ao)); setsockopt(sk, IPPROTO_TCP, TCP_REPAIR, &one, sizeof(one)); sockaddr.sin_family = AF_INET; sockaddr.sin_port = htobe16(123); inet_aton("127.0.0.1", &sockaddr.sin_addr); connect(sk,(struct sockaddr *)&sockaddr,sizeof(sockaddr)); return 0; } $ gcc tcp-ao-nullptr.c -o tcp-ao-nullptr -Wall $ unshare -Urn BUG: kernel NULL pointer dereference, address: 00000000000000b6 PGD 1f648d067 P4D 1f648d067 PUD 1982e8067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:tcp_ao_finish_connect (net/ipv4/tcp_ao.c:1182)
In the Linux kernel, the following vulnerability has been resolved: [ceph] parse_longname(): strrchr() expects NUL-terminated string ... and parse_longname() is not guaranteed that. That's the reason why it uses kmemdup_nul() to build the argument for kstrtou64(); the problem is, kstrtou64() is not the only thing that need it. Just get a NUL-terminated copy of the entire thing and be done with that...
In the Linux kernel, the following vulnerability has been resolved: pcmcia: Add error handling for add_interval() in do_validate_mem() In the do_validate_mem(), the call to add_interval() does not handle errors. If kmalloc() fails in add_interval(), it could result in a null pointer being inserted into the linked list, leading to illegal memory access when sub_interval() is called next. This patch adds an error handling for the add_interval(). If add_interval() returns an error, the function will return early with the error code.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject duplicate device on updates A chain/flowtable update with duplicated devices in the same batch is possible. Unfortunately, netdev event path only removes the first device that is found, leaving unregistered the hook of the duplicated device. Check if a duplicated device exists in the transaction batch, bail out with EEXIST in such case. WARNING is hit when unregistering the hook: [49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150 [49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full) [...] [49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: Fix order of DT parse and pinctrl register Move DT parse before pinctrl register. This ensures that device tree parsing is done before calling devm_pinctrl_register() to prevent using uninitialized pin resources.
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix dereferencing uninitialized error pointer Fix below smatch warnings: drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked() error: we previously assumed 'error' could be null
In the Linux kernel, the following vulnerability has been resolved: kvm: s390: Reject memory region operations for ucontrol VMs This change rejects the KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM. This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and would thus result in a null pointer dereference further in. Memory management needs to be performed in userspace and using the ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP. Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION and KVM_SET_USER_MEMORY_REGION2. [frankja@linux.ibm.com: commit message spelling fix, subject prefix fix]
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask() ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to ieee80211_iterate_stations_atomic(). Note in this case the iterator is required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does not follow it as it might sleep. Consequently below warning is seen: BUG: sleeping function called from invalid context at wmi.c:304 Call Trace: <TASK> dump_stack_lvl __might_resched.cold ath11k_wmi_cmd_send ath11k_wmi_set_peer_param ath11k_mac_disable_peer_fixed_rate ieee80211_iterate_stations_atomic ath11k_mac_op_set_bitrate_mask.cold Change to ieee80211_iterate_stations_mtx() to fix this issue. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: don't overflow max copy size With non-page aligned copy, we need to use 4 byte aligned pitch, however the size itself might still be close to our maximum of ~8M, and so the dimensions of the copy can easily exceed the S16_MAX limit of the copy command leading to the following assert: xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed! platform: BATTLEMAGE subplatform: 1 graphics: Xe2_HPG 20.01 step A0 media: Xe2_HPM 13.01 step A1 tile: 0 VRAM 10.0 GiB GT: 0 type 1 WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe] To fix this account for the pitch when calculating the number of current bytes to copy. (cherry picked from commit 8c2d61e0e916e077fda7e7b8e67f25ffe0f361fc)
In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would result in an invalid writen sector value return using the BIO sector. In order for zoned DM target drivers to avoid such incorrect BIO splitting, we must ensure that large BIOs are split before being passed to the map() function of the target, thus guaranteeing that the limits for the mapped device are not exceeded. dm-crypt and dm-flakey are the only target drivers supporting zoned devices and using dm_accept_partial_bio(). In the case of dm-crypt, this function is used to split BIOs to the internal max_write_size limit (which will be suppressed in a different patch). However, since crypt_alloc_buffer() uses a bioset allowing only up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS (128), must thus be respected and write BIOs split accordingly. In the case of dm-flakey, since zone append emulation is not required, the block layer zone write plugging is not used and no splitting of BIOs required. Modify the function dm_zone_bio_needs_split() to use the block layer helper function bio_needs_zone_write_plugging() to force a call to bio_split_to_limits() in dm_split_and_process_bio(). This allows DM target drivers to avoid using dm_accept_partial_bio() for write operations on zoned DM devices.
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked() When 9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown") moved the error messages dumping so that they don't need to be issued by the callers, it missed the case where __sev_firmware_shutdown() calls __sev_platform_shutdown_locked() with a NULL argument which leads to a NULL ptr deref on the shutdown path, during suspend to disk: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022 RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp] That rIP is: 00000000000006fd <__sev_platform_shutdown_locked.cold>: 6fd: 8b 13 mov (%rbx),%edx 6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi 703: 89 c1 mov %eax,%ecx Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e RSP: 0018:ffffc90005467d00 EFLAGS: 00010282 RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ and %rbx is nice and clean. Call Trace: <TASK> __sev_firmware_shutdown.isra.0 sev_dev_destroy psp_dev_destroy sp_destroy pci_device_shutdown device_shutdown kernel_power_off hibernate.cold state_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Pass in a pointer to the function-local error var in the caller. With that addressed, suspending the ccp shows the error properly at least: ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110 SEV-SNP: Leaking PFN range 0x146800-0x146a00 SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00] ... ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0 ACPI: PM: Preparing to enter system sleep state S5 kvm: exiting hardware virtualization reboot: Power down Btw, this driver is crying to be cleaned up to pass in a proper I/O struct which can be used to store information between the different functions, otherwise stuff like that will happen in the future again.
In the Linux kernel, the following vulnerability has been resolved: bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init() Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can cause various locking issues; see the following stack trace (edited for style) as one example: ... [10.011566] do_raw_spin_lock.cold [10.011570] try_to_wake_up (5) double-acquiring the same [10.011575] kick_pool rq_lock, causing a hardlockup [10.011579] __queue_work [10.011582] queue_work_on [10.011585] kernfs_notify [10.011589] cgroup_file_notify [10.011593] try_charge_memcg (4) memcg accounting raises an [10.011597] obj_cgroup_charge_pages MEMCG_MAX event [10.011599] obj_cgroup_charge_account [10.011600] __memcg_slab_post_alloc_hook [10.011603] __kmalloc_node_noprof ... [10.011611] bpf_map_kmalloc_node [10.011612] __bpf_async_init [10.011615] bpf_timer_init (3) BPF calls bpf_timer_init() [10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable [10.011619] bpf__sched_ext_ops_runnable [10.011620] enqueue_task_scx (2) BPF runs with rq_lock held [10.011622] enqueue_task [10.011626] ttwu_do_activate [10.011629] sched_ttwu_pending (1) grabs rq_lock ... The above was reproduced on bpf-next (b338cf849ec8) by modifying ./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during ops.runnable(), and hacking the memcg accounting code a bit to make a bpf_timer_init() call more likely to raise an MEMCG_MAX event. We have also run into other similar variants (both internally and on bpf-next), including double-acquiring cgroup_file_kn_lock, the same worker_pool::lock, etc. As suggested by Shakeel, fix this by using __GFP_HIGH instead of GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg() raises an MEMCG_MAX event, we call __memcg_memory_event() with @allow_spinning=false and avoid calling cgroup_file_notify() there. Depends on mm patch "memcg: skip cgroup_file_notify if spinning is not allowed": https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/ v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/ https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/ v1 approach: https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/
In the Linux kernel, the following vulnerability has been resolved: igb: Fix NULL pointer dereference in ethtool loopback test The igb driver currently causes a NULL pointer dereference when executing the ethtool loopback test. This occurs because there is no associated q_vector for the test ring when it is set up, as interrupts are typically not added to the test rings. Since commit 5ef44b3cb43b removed the napi_id assignment in __xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it. Therefore, simply use 0 as the last parameter.
In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list In shrink_folio_list(), the hwpoisoned folio may be large folio, which can't be handled by unmap_poisoned_folio(). For THP, try_to_unmap_one() must be passed with TTU_SPLIT_HUGE_PMD to split huge PMD first and then retry. Without TTU_SPLIT_HUGE_PMD, we will trigger null-ptr deref of pvmw.pte. Even we passed TTU_SPLIT_HUGE_PMD, we will trigger a WARN_ON_ONCE due to the page isn't in swapcache. Since UCE is rare in real world, and race with reclaimation is more rare, just skipping the hwpoisoned large folio is enough. memory_failure() will handle it if the UCE is triggered again. This happens when memory reclaim for large folio races with memory_failure(), and will lead to kernel panic. The race is as follows: cpu0 cpu1 shrink_folio_list memory_failure TestSetPageHWPoison unmap_poisoned_folio --> trigger BUG_ON due to unmap_poisoned_folio couldn't handle large folio [tujinjiang@huawei.com: add comment to unmap_poisoned_folio()]
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure Avoid potential NULL pointer dereference by checking the return value of kmalloc and handling allocation failure properly.
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated In case of an ib_fast_reg_mr allocation failure during iSER setup, the machine hits a panic because iscsi_conn->dd_data is initialized unconditionally, even when no memory is allocated (dd_size == 0). This leads invalid pointer dereference during connection teardown. Fix by setting iscsi_conn->dd_data only if memory is actually allocated. Panic trace: ------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70
In the Linux kernel, the following vulnerability has been resolved: genetlink: fix genl_bind() invoking bind() after -EPERM Per family bind/unbind callbacks were introduced to allow families to track multicast group consumer presence, e.g. to start or stop producing events depending on listeners. However, in genl_bind() the bind() callback was invoked even if capability checks failed and ret was set to -EPERM. This means that callbacks could run on behalf of unauthorized callers while the syscall still returned failure to user space. Fix this by only invoking bind() after "if (ret) break;" check i.e. after permission checks have succeeded.
In the Linux kernel, the following vulnerability has been resolved: can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked.
In the Linux kernel, the following vulnerability has been resolved: dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO is unplugged and issued from the zone write plug work. If this reminder BIO itself needs to be split, the reminder will be re-issued and plugged again, but that causes a call to a blk_queue_enter(), which may block if a queue freeze operation was initiated. This results in a deadlock as DM submission still holds BIOs that the queue freeze side is waiting for. 2) dm-crypt relies on the emulation done by the block layer using regular write operations for processing zone append operations. This still requires to properly return the written sector as the BIO sector of the original BIO. However, this can be done correctly only and only if there is a single clone BIO used for processing the original zone append operation issued by the user. If the size of a zone append operation is larger than dm-crypt max_write_size, then the orginal BIO will be split and processed as a chain of regular write operations. Such chaining result in an incorrect written sector being returned to the zone append issuer using the original BIO sector. This in turn results in file system data corruptions using xfs or btrfs. Fix this by modifying get_max_request_size() to always return the size of the BIO to avoid it being split with dm_accpet_partial_bio() in crypt_map(). get_max_request_size() is renamed to get_max_request_sectors() to clarify the unit of the value returned and its interface is changed to take a struct dm_target pointer and a pointer to the struct bio being processed. In addition to this change, to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt device max_hw_sectors limit to be at most BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture). This forces DM core to split write BIOs before passing them to crypt_map(), and thus guaranteeing that dm-crypt can always accept an entire write BIO without needing to split it. This change does not have any effect on the read path of dm-crypt. Read operations can still be split and the BIO fragments processed in parallel. There is also no impact on the performance of the write path given that all zone write BIOs were already processed inline instead of in parallel. This change also does not affect in any way regular dm-crypt block devices.
In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm When send a broadcast packet to a tap device, which was added to a bridge, br_nf_local_in() is called to confirm the conntrack. If another conntrack with the same hash value is added to the hash table, which can be triggered by a normal packet to a non-bridge device, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200 CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary) RIP: 0010:br_nf_local_in+0x168/0x200 Call Trace: <TASK> nf_hook_slow+0x3e/0xf0 br_pass_frame_up+0x103/0x180 br_handle_frame_finish+0x2de/0x5b0 br_nf_hook_thresh+0xc0/0x120 br_nf_pre_routing_finish+0x168/0x3a0 br_nf_pre_routing+0x237/0x5e0 br_handle_frame+0x1ec/0x3c0 __netif_receive_skb_core+0x225/0x1210 __netif_receive_skb_one_core+0x37/0xa0 netif_receive_skb+0x36/0x160 tun_get_user+0xa54/0x10c0 tun_chr_write_iter+0x65/0xb0 vfs_write+0x305/0x410 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- To solve the hash conflict, nf_ct_resolve_clash() try to merge the conntracks, and update skb->_nfct. However, br_nf_local_in() still use the old ct from local variable 'nfct' after confirm(), which leads to this warning. If confirm() does not insert the conntrack entry and return NF_DROP, the warning may also occur. There is no need to reserve the WARN_ON_ONCE, just remove it.
In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: add NULL check in DT parse Add a NULL check for the return value of of_get_property() when retrieving the "pinmux" property in the group parser. This avoids a potential NULL pointer dereference if the property is missing from the device tree node. Also fix a typo ("sintenel") in the device ID match table comment, correcting it to "sentinel".
In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock When netpoll is enabled, calling pr_warn_once() while holding kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock inversion with the netconsole subsystem. This occurs because pr_warn_once() may trigger netpoll, which eventually leads to __alloc_skb() and back into kmemleak code, attempting to reacquire kmemleak_lock. This is the path for the deadlock. mem_pool_alloc() -> raw_spin_lock_irqsave(&kmemleak_lock, flags); -> pr_warn_once() -> netconsole subsystem -> netpoll -> __alloc_skb -> __create_object -> raw_spin_lock_irqsave(&kmemleak_lock, flags); Fix this by setting a flag and issuing the pr_warn_once() after kmemleak_lock is released.
In the Linux kernel, the following vulnerability has been resolved: ice: Fix a null pointer dereference in ice_copy_and_init_pkg() Add check for the return value of devm_kmemdup() to prevent potential null pointer dereference.
In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix SCCB present check Tracing code called by the SCLP interrupt handler contains early exits if the SCCB address associated with an interrupt is NULL. This check is performed after physical to virtual address translation. If the kernel identity mapping does not start at address zero, the resulting virtual address is never zero, so that the NULL checks won't work. Subsequently this may result in incorrect accesses to the first page of the identity mapping. Fix this by introducing a function that handles the NULL case before address translation.
In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL pointer dereference in UTF16 conversion There can be a NULL pointer dereference bug here. NULL is passed to __cifs_sfu_make_node without checks, which passes it unchecked to cifs_strndup_to_utf16, which in turn passes it to cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash. This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and returns NULL early to prevent dereferencing NULL pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE
In the Linux kernel, the following vulnerability has been resolved: smb: client: let recv_done verify data_offset, data_length and remaining_data_length This is inspired by the related server fixes.
In the Linux kernel, the following vulnerability has been resolved: x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: scarlett2: Fix missing NULL check scarlett2_input_select_ctl_info() sets up the string arrays allocated via kasprintf(), but it misses NULL checks, which may lead to NULL dereference Oops. Let's add the proper NULL check.
In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject invalid file types when reading inodes To prevent inodes with invalid file types from tripping through the vfs and causing malfunctions or assertion failures, add a missing sanity check when reading an inode from a block device. If the file type is not valid, treat it as a filesystem error.
In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: unregister ECC engine on probe error and device remove The on-host hardware ECC engine remains registered both when the spi_register_controller() function returns with an error and also on device removal. Change the qcom_spi_probe() function to unregister the engine on the error path, and add the missing unregistering call to qcom_spi_remove() to avoid possible use-after-free issues.
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/nvif: Fix potential memory leak in nvif_vmm_ctor(). When the nvif_vmm_type is invalid, we will return error directly without freeing the args in nvif_vmm_ctor(), which leading a memory leak. Fix it by setting the ret -EINVAL and goto done.
In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop.
In the Linux kernel, the following vulnerability has been resolved: btrfs: abort transaction on unexpected eb generation at btrfs_copy_root() If we find an unexpected generation for the extent buffer we are cloning at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the transaction, meaning we allow to persist metadata with an unexpected generation. Instead of warning only, abort the transaction and return -EUCLEAN.
In the Linux kernel, the following vulnerability has been resolved: HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version() in ntrig_report_version(), hdev parameter passed from hid_probe(). sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null if hdev->dev.parent->parent is null, usb_dev has invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned when usb_rcvctrlpipe() use usb_dev,it trigger page fault error for address(0xffffffffffffff58) add null check logic to ntrig_report_version() before calling hid_to_usb_dev()
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix lockdep assertion on sync reset unload event Fix lockdep assertion triggered during sync reset unload event. When the sync reset flow is initiated using the devlink reload fw_activate option, the PF already holds the devlink lock while handling unload event. In this case, delegate sync reset unload event handling back to the devlink callback process to avoid double-locking and resolve the lockdep warning. Kernel log: WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40 [...] Call Trace: <TASK> mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core] mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core] process_one_work+0x222/0x640 worker_thread+0x199/0x350 kthread+0x10b/0x230 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x8e/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL If metric table address is not allocated, accessing metrics_bin will result in a NULL pointer dereference, so add a check.
In the Linux kernel, the following vulnerability has been resolved: ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data() when an inode had the INLINE_DATA_FL flag set but was missing the system.data extended attribute. Since this can happen due to a maiciouly fuzzed file system, we shouldn't BUG, but rather, report it as a corrupted file system. Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii ext4_create_inline_data() and ext4_inline_data_truncate().
In the Linux kernel, the following vulnerability has been resolved: media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval Getting / Setting the frame interval using the V4L2 subdev pad ops get_frame_interval/set_frame_interval causes a deadlock, as the subdev state is locked in the [1] but also in the driver itself. In [2] it's described that the caller is responsible to acquire and release the lock in this case. Therefore, acquiring the lock in the driver is wrong. Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval() and mt9m114_ifp_set_frame_interval(). [1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129 [2] Documentation/driver-api/media/v4l2-subdev.rst
In the Linux kernel, the following vulnerability has been resolved: tee: fix NULL pointer dereference in tee_shm_put tee_shm_put have NULL pointer dereference: __optee_disable_shm_cache --> shm = reg_pair_to_ptr(...);//shm maybe return NULL tee_shm_free(shm); --> tee_shm_put(shm);//crash Add check in tee_shm_put to fix it. panic log: Unable to handle kernel paging request at virtual address 0000000000100cca Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000002049d07000 [0000000000100cca] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 2 PID: 14442 Comm: systemd-sleep Tainted: P OE ------- ---- 6.6.0-39-generic #38 Source Version: 938b255f6cb8817c95b0dd5c8c2944acfce94b07 Hardware name: greatwall GW-001Y1A-FTH, BIOS Great Wall BIOS V3.0 10/26/2022 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tee_shm_put+0x24/0x188 lr : tee_shm_free+0x14/0x28 sp : ffff001f98f9faf0 x29: ffff001f98f9faf0 x28: ffff0020df543cc0 x27: 0000000000000000 x26: ffff001f811344a0 x25: ffff8000818dac00 x24: ffff800082d8d048 x23: ffff001f850fcd18 x22: 0000000000000001 x21: ffff001f98f9fb88 x20: ffff001f83e76218 x19: ffff001f83e761e0 x18: 000000000000ffff x17: 303a30303a303030 x16: 0000000000000000 x15: 0000000000000003 x14: 0000000000000001 x13: 0000000000000000 x12: 0101010101010101 x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800080e08d0c x8 : ffff001f98f9fb88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff001f83e761e0 x1 : 00000000ffff001f x0 : 0000000000100cca Call trace: tee_shm_put+0x24/0x188 tee_shm_free+0x14/0x28 __optee_disable_shm_cache+0xa8/0x108 optee_shutdown+0x28/0x38 platform_shutdown+0x28/0x40 device_shutdown+0x144/0x2b0 kernel_power_off+0x3c/0x80 hibernate+0x35c/0x388 state_store+0x64/0x80 kobj_attr_store+0x14/0x28 sysfs_kf_write+0x48/0x60 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x270/0x370 ksys_write+0x6c/0x100 __arm64_sys_write+0x20/0x30 invoke_syscall+0x4c/0x120 el0_svc_common.constprop.0+0x44/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x24/0x88 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x14c/0x15
In the Linux kernel, the following vulnerability has been resolved: tls: make sure to abort the stream if headers are bogus Normally we wait for the socket to buffer up the whole record before we service it. If the socket has a tiny buffer, however, we read out the data sooner, to prevent connection stalls. Make sure that we abort the connection when we find out late that the record is actually invalid. Retrying the parsing is fine in itself but since we copy some more data each time before we parse we can overflow the allocated skb space. Constructing a scenario in which we're under pressure without enough data in the socket to parse the length upfront is quite hard. syzbot figured out a way to do this by serving us the header in small OOB sends, and then filling in the recvbuf with a large normal send. Make sure that tls_rx_msg_size() aborts strp, if we reach an invalid record there's really no way to recover.
In the Linux kernel, the following vulnerability has been resolved: Revert "drm/gem-shmem: Use dma_buf from GEM object instance" This reverts commit 1a148af06000e545e714fe3210af3d77ff903c11. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable
In the Linux kernel, the following vulnerability has been resolved: eth: mlx4: Fix IS_ERR() vs NULL check bug in mlx4_en_create_rx_ring Replace NULL check with IS_ERR() check after calling page_pool_create() since this function returns error pointers (ERR_PTR). Using NULL check could lead to invalid pointer dereference.
In the Linux kernel, the following vulnerability has been resolved: media: usbtv: Lock resolution while streaming When an program is streaming (ffplay) and another program (qv4l2) changes the TV standard from NTSC to PAL, the kernel crashes due to trying to copy to unmapped memory. Changing from NTSC to PAL increases the resolution in the usbtv struct, but the video plane buffer isn't adjusted, so it overflows. [hverkuil: call vb2_is_busy instead of vb2_is_streaming]