In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Fix possible deadlocks in core system-wide PM code It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false.

In the Linux kernel, the following vulnerability has been resolved: serial: imx: fix tx statemachine deadlock When using the serial port as RS485 port, the tx statemachine is used to control the RTS pin to drive the RS485 transceiver TX_EN pin. When the TTY port is closed in the middle of a transmission (for instance during userland application crash), imx_uart_shutdown disables the interface and disables the Transmission Complete interrupt. afer that, imx_uart_stop_tx bails on an incomplete transmission, to be retriggered by the TC interrupt. This interrupt is disabled and therefore the tx statemachine never transitions out of SEND. The statemachine is in deadlock now, and the TX_EN remains low, making the interface useless. imx_uart_stop_tx now checks for incomplete transmission AND whether TC interrupts are enabled before bailing to be retriggered. This makes sure the state machine handling is reached, and is properly set to WAIT_AFTER_SEND.

In the Linux kernel, the following vulnerability has been resolved: ACPI: LPIT: Avoid u32 multiplication overflow In lpit_update_residency() there is a possibility of overflow in multiplication, if tsc_khz is large enough (> UINT_MAX/1000). Change multiplication to mul_u32_u32(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology() Get logical socket id instead of physical id in discover_upi_topology() to avoid out-of-bound access on 'upi = &type->topology[nid][idx];' line that leads to NULL pointer dereference in upi_fill_topology()

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access When translating source to sink streams in the crossbar subdev, the driver tries to locate the remote subdev connected to the sink pad. The remote pad may be NULL, if userspace tries to enable a stream that ends at an unconnected crossbar sink. When that occurs, the driver dereferences the NULL pad, leading to a crash. Prevent the crash by checking if the pad is NULL before using it, and return an error if it is.

In the Linux kernel, the following vulnerability has been resolved: drm: Don't unref the same fb many times by mistake due to deadlock handling If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end result is that the fb will (eventually) end up being freed while it's still in use. Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup. This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit.

In the Linux kernel, the following vulnerability has been resolved: iio: core: fix memleak in iio_device_register_sysfs When iio_device_register_sysfs_group() fails, we should free iio_dev_opaque->chan_attr_group.attrs to prevent potential memleak.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate session id and tree id in compound request `smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session() will always return the first request smb2 header in a compound request. if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will return 0, i.e. The tree id check is skipped. This patch use ksmbd_req_buf_next() to get current command in compound.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock when freeing cgroup storage The following commit bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]") first introduced deadlock prevention for fentry/fexit programs attaching on bpf_task_storage helpers. That commit also employed the logic in map free path in its v6 version. Later bpf_cgrp_storage was first introduced in c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs") which faces the same issue as bpf_task_storage, instead of its busy counter, NULL was passed to bpf_local_storage_map_free() which opened a window to cause deadlock: <TASK> (acquiring local_storage->lock) _raw_spin_lock_irqsave+0x3d/0x50 bpf_local_storage_update+0xd1/0x460 bpf_cgrp_storage_get+0x109/0x130 bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170 ? __bpf_prog_enter_recur+0x16/0x80 bpf_trampoline_6442485186+0x43/0xa4 cgroup_storage_ptr+0x9/0x20 (holding local_storage->lock) bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160 bpf_selem_unlink_storage+0x6f/0x110 bpf_local_storage_map_free+0xa2/0x110 bpf_map_free_deferred+0x5b/0x90 process_one_work+0x17c/0x390 worker_thread+0x251/0x360 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Progs: - A: SEC("fentry/cgroup_storage_ptr") - cgid (BPF_MAP_TYPE_HASH) Record the id of the cgroup the current task belonging to in this hash map, using the address of the cgroup as the map key. - cgrpa (BPF_MAP_TYPE_CGRP_STORAGE) If current task is a kworker, lookup the above hash map using function parameter @owner as the key to get its corresponding cgroup id which is then used to get a trusted pointer to the cgroup through bpf_cgroup_from_id(). This trusted pointer can then be passed to bpf_cgrp_storage_get() to finally trigger the deadlock issue. - B: SEC("tp_btf/sys_enter") - cgrpb (BPF_MAP_TYPE_CGRP_STORAGE) The only purpose of this prog is to fill Prog A's hash map by calling bpf_cgrp_storage_get() for as many userspace tasks as possible. Steps to reproduce: - Run A; - while (true) { Run B; Destroy B; } Fix this issue by passing its busy counter to the free procedure so it can be properly incremented before storage/smap locking.

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type On 64-bit platforms, the pfn_to_kaddr() macro requires that the input value is 64 bits in order to ensure that valid address bits don't get lost when shifting that input by PAGE_SHIFT to calculate the physical address to provide a virtual address for. One such example is in pvalidate_pages() (used by SEV-SNP guests), where the GFN in the struct used for page-state change requests is a 40-bit bit-field, so attempts to pass this GFN field directly into pfn_to_kaddr() ends up causing guest crashes when dealing with addresses above the 1TB range due to the above. Fix this issue with SEV-SNP guests, as well as any similar cases that might cause issues in current/future code, by using an inline function, instead of a macro, so that the input is implicitly cast to the expected 64-bit input type prior to performing the shift operation. While it might be argued that the issue is on the caller side, other archs/macros have taken similar approaches to deal with instances like this, such as ARM explicitly casting the input to phys_addr_t: e48866647b48 ("ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()") A C inline function is even better though. [ mingo: Refined the changelog some more & added __always_inline. ]

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing error check to scarlett2_usb_set_config() scarlett2_usb_set_config() calls scarlett2_usb_get() but was not checking the result. Return the error if it fails rather than continuing with an invalid value.

A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem.

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before sending a command [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] For functions that execute within a DC context or DC lock we can wrap the direct calls to dm_execute_dmub_cmd/list with code that exits idle power optimizations and reallows once we're done with the command submission on success. For DM direct submissions the DM will need to manage the enter/exit sequencing manually. We cannot invoke a DMCUB command directly within the DM execution helper or we can deadlock.

A locally locally exploitable DOS vulnerability was found in pax-linux versions 2.6.32.33-test79.patch, 2.6.38-test3.patch, and 2.6.37.4-test14.patch. A bad bounds check in arch_get_unmapped_area_topdown triggered by programs doing an mmap after a MAP_GROWSDOWN mmap will create an infinite loop condition without releasing the VM semaphore eventually leading to a system crash.

In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME.

In the Linux kernel, the following vulnerability has been resolved: sysctl: Fix out of bounds access for empty sysctl registers When registering tables to the sysctl subsystem there is a check to see if header is a permanently empty directory (used for mounts). This check evaluates the first element of the ctl_table. This results in an out of bounds evaluation when registering empty directories. The function register_sysctl_mount_point now passes a ctl_table of size 1 instead of size 0. It now relies solely on the type to identify a permanently empty register. Make sure that the ctl_table has at least one element before testing for permanent emptiness.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TX CQE error handling For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging.

In the Linux kernel, the following vulnerability has been resolved: powerpc/47x: Fix 47x syscall return crash Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP:  b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400   Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR:  00000030 <IR,DR>  CR: 00001000  XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles.

In the Linux kernel, the following vulnerability has been resolved: crypto: safexcel - Add error handling for dma_map_sg() calls Macro dma_map_sg() may return 0 on error. This patch enables checks in case of the macro failure and ensures unmapping of previously mapped buffers with dma_unmap_sg(). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE.

In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume When the optional PRE_COPY support was added to speed up the device compatibility check, it failed to update the saving/resuming data pointers based on the fd offset. This results in migration data corruption and when the device gets started on the destination the following error is reported in some cases, [ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: [ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010 [ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f [ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found [ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found [ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2

In the Linux kernel, the following vulnerability has been resolved: freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL Tetsuo-San noted that commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") broke call_usermodehelper_exec() for the KILLABLE case. Specifically it was missed that the second, unconditional, wait_for_completion() was not optional and ensures the on-stack completion is unused before going out-of-scope.

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: restart beacon queue when hardware reset When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw().

In the Linux kernel, the following vulnerability has been resolved: gpio: sim: fix a memory leak Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO hog structures never being freed.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected. Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed. So use damon_destroy_target to free all the damon_regions and damon_target. unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dccp: fix dccp_v4_err()/dccp_v6_err() again dh->dccph_x is the 9th byte (offset 8) in "struct dccp_hdr", not in the "byte 7" as Jann claimed. We need to make sure the ICMP messages are big enough, using more standard ways (no more assumptions). syzbot reported: BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2681 [inline] BUG: KMSAN: uninit-value in dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 icmpv6_notify+0x4c7/0x880 net/ipv6/icmp.c:867 icmpv6_rcv+0x19d5/0x30d0 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:304 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:304 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x83b/0x920 tun_get_user+0x564c/0x6940 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6313 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x23cf/0x6940 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 4995 Comm: syz-executor153 Not tainted 6.6.0-rc1-syzkaller-00014-ga747acc0b752 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set all reserved memblocks on Node#0 at initialization After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()") we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled: [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733 [ 0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90 [ 0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0 [ 0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000 [ 0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800 [ 0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20 [ 0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000 [ 0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000 [ 0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000 [ 0.000000] ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c [ 0.000000] ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0) [ 0.000000] BADV: 0000000000002b82 [ 0.000000] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00 [ 0.000000] 900000000470e000 90000000002c1918 0000000000000000 9000000004110780 [ 0.000000] 00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748 [ 0.000000] 0000000000000000 900000000421ca84 9000000004620000 9000000004564970 [ 0.000000] 90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000 [ 0.000000] 9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000 [ 0.000000] 0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918 [ 0.000000] 90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000 [ 0.000000] 90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c [ 0.000000] 9000000004270008 0000000000000001 0000000000000000 90000000045ccd00 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c [ 0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350 [ 0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc [ 0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4 [ 0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc [ 0.000000] [ 0.000000] Code: 02eb21ad 00410f4c 380c31ac <262b818d> 6800b70d 02c1c196 0015001c 57fe4bb1 260002cd The reason is early memblock_reserve() in memblock_init() set node id to MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain reserve_bootmem_region() -> init_reserved_page(). After memblock_init(), those late calls of memblock_reserve() operate on subregions of memblock .memory regions. As a result, these reserved regions will be set to the correct node at the first iteration of memmap_init_reserved_pages(). So set all reserved memblocks on Node#0 at initialization can avoid this panic.

In the Linux kernel, the following vulnerability has been resolved: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239. The commit above is reverted as it did not solve the original issue. gsm_cleanup_mux() tries to free up the virtual ttys by calling gsm_dlci_release() for each available DLCI. There, dlci_put() is called to decrease the reference counter for the DLCI via tty_port_put() which finally calls gsm_dlci_free(). This already clears the pointer which is being checked in gsm_cleanup_mux() before calling gsm_dlci_release(). Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux() as done in the reverted commit. The commit introduces a null pointer dereference: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x156/0x420 ? search_exception_tables+0x37/0x50 ? fixup_exception+0x21/0x310 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? tty_port_put+0x19/0xa0 gsmtty_cleanup+0x29/0x80 [n_gsm] release_one_tty+0x37/0xe0 process_one_work+0x1e6/0x3e0 worker_thread+0x4c/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The actual issue is that nothing guards dlci_put() from being called multiple times while the tty driver was triggered but did not yet finished calling gsm_dlci_free().

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range When running an SVA case, the following soft lockup is triggered: -------------------------------------------------------------------- watchdog: BUG: soft lockup - CPU#244 stuck for 26s! pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50 sp : ffff8000d83ef290 x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000 x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000 x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0 x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0 x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 __arm_smmu_tlb_inv_range+0x118/0x254 arm_smmu_tlb_inv_range_asid+0x6c/0x130 arm_smmu_mm_invalidate_range+0xa0/0xa4 __mmu_notifier_invalidate_range_end+0x88/0x120 unmap_vmas+0x194/0x1e0 unmap_region+0xb4/0x144 do_mas_align_munmap+0x290/0x490 do_mas_munmap+0xbc/0x124 __vm_munmap+0xa8/0x19c __arm64_sys_munmap+0x28/0x50 invoke_syscall+0x78/0x11c el0_svc_common.constprop.0+0x58/0x1c0 do_el0_svc+0x34/0x60 el0_svc+0x2c/0xd4 el0t_64_sync_handler+0x114/0x140 el0t_64_sync+0x1a4/0x1a8 -------------------------------------------------------------------- Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains. The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called typically next to MMU tlb flush function, e.g. tlb_flush_mmu_tlbonly { tlb_flush { __flush_tlb_range { // check MAX_TLBI_OPS } } mmu_notifier_arch_invalidate_secondary_tlbs { arm_smmu_mm_arch_invalidate_secondary_tlbs { // does not check MAX_TLBI_OPS } } } Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an SVA case SMMU uses the CPU page table, so it makes sense to align with the tlbflush code. Then, replace per-page TLBI commands with a single per-asid TLBI command, if the request size hits this threshold.

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing mutex lock around get meter levels As scarlett2_meter_ctl_get() uses meter_level_map[], the data_mutex should be locked while accessing it.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a suspicious RCU usage warning I received the following warning while running cthon against an ontap server running pNFS: [ 57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [ 57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913] do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921] filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969] __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [ 57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982] RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [ 57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP: 00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix possible NULL dereference in amdgpu_ras_query_error_status_helper() Return invalid error code -EINVAL for invalid block id. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176)

In the Linux kernel, the following vulnerability has been resolved: efivarfs: force RO when remounting if SetVariable is not supported If SetVariable at runtime is not supported by the firmware we never assign a callback for that function. At the same time mount the efivarfs as RO so no one can call that. However, we never check the permission flags when someone remounts the filesystem as RW. As a result this leads to a crash looking like this: $ mount -o remount,rw /sys/firmware/efi/efivars $ efi-updatevar -f PK.auth PK [ 303.279166] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 303.280482] Mem abort info: [ 303.280854] ESR = 0x0000000086000004 [ 303.281338] EC = 0x21: IABT (current EL), IL = 32 bits [ 303.282016] SET = 0, FnV = 0 [ 303.282414] EA = 0, S1PTW = 0 [ 303.282821] FSC = 0x04: level 0 translation fault [ 303.283771] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004258c000 [ 303.284913] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 303.286076] Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP [ 303.286936] Modules linked in: qrtr tpm_tis tpm_tis_core crct10dif_ce arm_smccc_trng rng_core drm fuse ip_tables x_tables ipv6 [ 303.288586] CPU: 1 PID: 755 Comm: efi-updatevar Not tainted 6.3.0-rc1-00108-gc7d0c4695c68 #1 [ 303.289748] Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.04-00627-g88336918701d 04/01/2023 [ 303.291150] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 303.292123] pc : 0x0 [ 303.292443] lr : efivar_set_variable_locked+0x74/0xec [ 303.293156] sp : ffff800008673c10 [ 303.293619] x29: ffff800008673c10 x28: ffff0000037e8000 x27: 0000000000000000 [ 303.294592] x26: 0000000000000800 x25: ffff000002467400 x24: 0000000000000027 [ 303.295572] x23: ffffd49ea9832000 x22: ffff0000020c9800 x21: ffff000002467000 [ 303.296566] x20: 0000000000000001 x19: 00000000000007fc x18: 0000000000000000 [ 303.297531] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaac807ab54 [ 303.298495] x14: ed37489f673633c0 x13: 71c45c606de13f80 x12: 47464259e219acf4 [ 303.299453] x11: ffff000002af7b01 x10: 0000000000000003 x9 : 0000000000000002 [ 303.300431] x8 : 0000000000000010 x7 : ffffd49ea8973230 x6 : 0000000000a85201 [ 303.301412] x5 : 0000000000000000 x4 : ffff0000020c9800 x3 : 00000000000007fc [ 303.302370] x2 : 0000000000000027 x1 : ffff000002467400 x0 : ffff000002467000 [ 303.303341] Call trace: [ 303.303679] 0x0 [ 303.303938] efivar_entry_set_get_size+0x98/0x16c [ 303.304585] efivarfs_file_write+0xd0/0x1a4 [ 303.305148] vfs_write+0xc4/0x2e4 [ 303.305601] ksys_write+0x70/0x104 [ 303.306073] __arm64_sys_write+0x1c/0x28 [ 303.306622] invoke_syscall+0x48/0x114 [ 303.307156] el0_svc_common.constprop.0+0x44/0xec [ 303.307803] do_el0_svc+0x38/0x98 [ 303.308268] el0_svc+0x2c/0x84 [ 303.308702] el0t_64_sync_handler+0xf4/0x120 [ 303.309293] el0t_64_sync+0x190/0x194 [ 303.309794] Code: ???????? ???????? ???????? ???????? (????????) [ 303.310612] ---[ end trace 0000000000000000 ]--- Fix this by adding a .reconfigure() function to the fs operations which we can use to check the requested flags and deny anything that's not RO if the firmware doesn't implement SetVariable at runtime.

In the Linux kernel, the following vulnerability has been resolved: net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/

In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy() After the commit in Fixes:, if a module that created a slab cache does not release all of its allocated objects before destroying the cache (at rmmod time), we might end up releasing the kmem_cache object without removing it from the slab_caches list thus corrupting the list as kmem_cache_destroy() ignores the return value from shutdown_cache(), which in turn never removes the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails to release all of the cache's slabs. This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y as after that ill release the system will immediately trip on list_add, or list_del, assertions similar to the one shown below as soon as another kmem_cache gets created, or destroyed: [ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268) [ 1041.219165] ------------[ cut here ]------------ [ 1041.221517] kernel BUG at lib/list_debug.c:62! [ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0 Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y, is to set slub_debug to poison the released objects and then just run cat /proc/slabinfo after removing the module that leaks slab objects, in which case the kernel will panic: [ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI [ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0 This patch fixes this issue by properly checking shutdown_cache()'s return value before taking the kmem_cache_release() branch.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix a memleak in gss_import_v2_context The ctx->mech_used.data allocated by kmemdup is not freed in neither gss_import_v2_context nor it only caller gss_krb5_import_sec_context, which frees ctx on error. Thus, this patch reform the last call of gss_import_v2_context to the gss_krb5_import_ctx_v2, preventing the memleak while keepping the return formation.

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested.

In the Linux kernel, the following vulnerability has been resolved: crypto: rsa - add a check for allocation failure Static checkers insist that the mpi_alloc() allocation can fail so add a check to prevent a NULL dereference. Small allocations like this can't actually fail in current kernels, but adding a check is very simple and makes the static checkers happy.

In the Linux kernel, the following vulnerability has been resolved: team: fix null-ptr-deref when team device type is changed Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: net: fix possible store tearing in neigh_periodic_work() While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev().

In the Linux kernel, the following vulnerability has been resolved: aio: fix mremap after fork null-deref Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced a null-deref if mremap is called on an old aio mapping after fork as mm->ioctx_table will be set to NULL. [jmoyer@redhat.com: fix 80 column issue]

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: dsi: Add missing check for of_find_device_by_node Add check for the return value of of_find_device_by_node() and return the error if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame() It is preferable to exit through the out: label because internal debugging functions are located there.

In the Linux kernel, the following vulnerability has been resolved: powerpc/lib: Validate size for vector operations Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix lock dependency warning with srcu ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-yangp #2289 Not tainted ------------------------------------------------------ kworker/0:2/996 is trying to acquire lock: (srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0 but task is already holding lock: ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at: process_one_work+0x211/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu] svm_range_set_attr+0xd6/0x14c0 [amdgpu] kfd_ioctl+0x1d1/0x630 [amdgpu] __x64_sys_ioctl+0x88/0xc0 -> #2 (&info->lock#2){+.+.}-{3:3}: __mutex_lock+0x99/0xc70 amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu] restore_process_helper+0x22/0x80 [amdgpu] restore_process_worker+0x2d/0xa0 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 -> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 __cancel_work_timer+0x12c/0x1c0 kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu] __mmu_notifier_release+0xad/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 do_exit+0x322/0xb90 do_group_exit+0x37/0xa0 __x64_sys_exit_group+0x18/0x20 do_syscall_64+0x38/0x80 -> #0 (srcu){.+.+}-{0:0}: __lock_acquire+0x1521/0x2510 lock_sync+0x5f/0x90 __synchronize_srcu+0x4f/0x1a0 __mmu_notifier_release+0x128/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 svm_range_deferred_list_work+0x19f/0x350 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 other info that might help us debug this: Chain exists of: srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&svms->deferred_list_work)); lock(&info->lock#2); lock((work_completion)(&svms->deferred_list_work)); sync(srcu);

In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_spi: fix error handling in mmc_spi_probe() If mmc_add_host() fails, it doesn't need to call mmc_remove_host(), or it will cause null-ptr-deref, because of deleting a not added device in mmc_remove_host(). To fix this, goto label 'fail_glue_init', if mmc_add_host() fails, and change the label 'fail_add_host' to 'fail_gpiod_request'.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix lock ordering in btrfs_zone_activate() The btrfs CI reported a lockdep warning as follows by running generic generic/129. WARNING: possible circular locking dependency detected 6.7.0-rc5+ #1 Not tainted ------------------------------------------------------ kworker/u5:5/793427 is trying to acquire lock: ffff88813256d028 (&cache->lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x5e/0x130 but task is already holding lock: ffff88810a23a318 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}, at: btrfs_zone_finish_one_bg+0x34/0x130 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&fs_info->zone_active_bgs_lock){+.+.}-{2:2}: ... -> #0 (&cache->lock){+.+.}-{2:2}: ... This is because we take fs_info->zone_active_bgs_lock after a block_group's lock in btrfs_zone_activate() while doing the opposite in other places. Fix the issue by expanding the fs_info->zone_active_bgs_lock's critical section and taking it before a block_group's lock.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix an NULL dereference bug The issue here is when this is called from ntfs_load_attr_list(). The "size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow on a 64bit systems but on 32bit systems the "+ 1023" can overflow and the result is zero. This means that the kmalloc will succeed by returning the ZERO_SIZE_PTR and then the memcpy() will crash with an Oops on the next line.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Drop chan lock before queuing buffers Ensure read and write locks for the channel are not taken in succession by dropping the read lock from parse_xfer_event() such that a callback given to client can potentially queue buffers and acquire the write lock in that process. Any queueing of buffers should be done without channel read lock acquired as it can result in multiple locks and a soft lockup. [mani: added fixes tag and cc'ed stable]