Broadcom RAID Controller web interface is vulnerable to exposure of sensitive data and the keys used for encryption are accessible to any local user on Linux

A use-after-free vulnerability was found in rtsx_usb_ms_drv_remove in drivers/memstick/host/rtsx_usb_ms.c in memstick in the Linux kernel. In this flaw, a local attacker with a user privilege may impact system Confidentiality. This flaw affects kernel versions prior to 5.14 rc1.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kernel address leakage in atomic fetch The change in commit 37086bfdc737 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since this would allow for unprivileged users to leak kernel pointers. For example, an atomic fetch/and with -1 on a stack destination which holds a spilled pointer will migrate the spilled register type into a scalar, which can then be exported out of the program (since scalar != pointer) by dumping it into a map value. The original implementation of XADD was preventing this situation by using a double call to check_mem_access() one with BPF_READ and a subsequent one with BPF_WRITE, in both cases passing -1 as a placeholder value instead of register as per XADD semantics since it didn't contain a value fetch. The BPF_READ also included a check in check_stack_read_fixed_off() which rejects the program if the stack slot is of __is_pointer_value() if dst_regno < 0. The latter is to distinguish whether we're dealing with a regular stack spill/ fill or some arithmetical operation which is disallowed on non-scalars, see also 6e7e63cbb023 ("bpf: Forbid XADD on spilled pointers for unprivileged users") for more context on check_mem_access() and its handling of placeholder value -1. One minimally intrusive option to fix the leak is for the BPF_FETCH case to initially check the BPF_READ case via check_mem_access() with -1 as register, followed by the actual load case with non-negative load_reg to propagate stack bounds to registers.

The swiotlb_print_info function in lib/swiotlb.c in the Linux kernel through 4.14.14 allows local users to obtain sensitive address information by reading dmesg data from a "software IO TLB" printk call.

The check_alu_op() function in kernel/bpf/verifier.c in the Linux kernel through v5.16-rc5 did not properly update bounds while handling the mov32 instruction, which allows local users to obtain potentially sensitive address information, aka a "pointer leak."

pep_sock_accept in net/phonet/pep.c in the Linux kernel through 5.15.8 has a refcount leak.

A memory leak flaw was found in the Linux kernel’s DMA subsystem, in the way a user calls DMA_FROM_DEVICE. This flaw allows a local user to read random memory from the kernel space.

Sensitive information disclosure due to excessive collection of system information. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 30991, Acronis Cyber Protect 15 (Linux, macOS, Windows) before build 35979.

A flaw was found in the Linux kernel in net/netfilter/nf_tables_core.c:nft_do_chain, which can cause a use-after-free. This issue needs to handle 'return' with proper preconditions, as it can lead to a kernel information leak problem caused by a local, unprivileged attacker.

An insufficiently protected credentials vulnerability exists in the Palo Alto Networks GlobalProtect app on Linux that exposes the hashed credentials of GlobalProtect users that saved their password during previous GlobalProtect app sessions to other local users on the system. The exposed credentials enable a local attacker to authenticate to the GlobalProtect portal or gateway as the target user without knowing of the target user’s plaintext password. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.10 on Linux. GlobalProtect app 5.2 versions earlier than and including GlobalProtect app 5.2.7 on Linux. GlobalProtect app 5.3 versions earlier than GlobalProtect app 5.3.2 on Linux. This issue does not affect the GlobalProtect app on other platforms.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Fix DSP oops stack dump output contents Fix @buf arg given to hex_dump_to_buffer() and stack address used in dump error output.

In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix stack information leak The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg The implementation of BPF_CMPXCHG on a high level has the following parameters: .-[old-val] .-[new-val] BPF_R0 = cmpxchg{32,64}(DST_REG + insn->off, BPF_R0, SRC_REG) `-[mem-loc] `-[old-val] Given a BPF insn can only have two registers (dst, src), the R0 is fixed and used as an auxilliary register for input (old value) as well as output (returning old value from memory location). While the verifier performs a number of safety checks, it misses to reject unprivileged programs where R0 contains a pointer as old value. Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the guessed address into the map slot as a scalar, and using the map value pointer as R0 while SRC_REG has a canary value to detect a matching address. Fix it by checking R0 for pointers, and reject if that's the case for unprivileged programs.

In the Linux kernel, the following vulnerability has been resolved: isofs: Fix out of bound access for corrupted isofs image When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix wq cleanup of WQCFG registers A pre-release silicon erratum workaround where wq reset does not clear WQCFG registers was leaked into upstream code. Use wq reset command instead of blasting the MMIO region. This also address an issue where we clobber registers in future devices.

In the Linux kernel, the following vulnerability has been resolved: locking/qrwlock: Fix ordering in queued_write_lock_slowpath() While this code is executed with the wait_lock held, a reader can acquire the lock without holding wait_lock. The writer side loops checking the value with the atomic_cond_read_acquire(), but only truly acquires the lock when the compare-and-exchange is completed successfully which isn’t ordered. This exposes the window between the acquire and the cmpxchg to an A-B-A problem which allows reads following the lock acquisition to observe values speculatively before the write lock is truly acquired. We've seen a problem in epoll where the reader does a xchg while holding the read lock, but the writer can see a value change out from under it. Writer | Reader -------------------------------------------------------------------------------- ep_scan_ready_list() | |- write_lock_irq() | |- queued_write_lock_slowpath() | |- atomic_cond_read_acquire() | | read_lock_irqsave(&ep->lock, flags); --> (observes value before unlock) | chain_epi_lockless() | | epi->next = xchg(&ep->ovflist, epi); | | read_unlock_irqrestore(&ep->lock, flags); | | | atomic_cmpxchg_relaxed() | |-- READ_ONCE(ep->ovflist); | A core can order the read of the ovflist ahead of the atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire semantics addresses this issue at which point the atomic_cond_read can be switched to use relaxed semantics. [peterz: use try_cmpxchg()]

In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix info leak in hid_submit_ctrl In hid_submit_ctrl(), the way of calculating the report length doesn't take into account that report->size can be zero. When running the syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to calculate transfer_buffer_length as 16384. When this urb is passed to the usb core layer, KMSAN reports an info leak of 16384 bytes. To fix this, first modify hid_report_len() to account for the zero report size case by using DIV_ROUND_UP for the division. Then, call it from hid_submit_ctrl().

In the Linux kernel, the following vulnerability has been resolved: media: venus: core: Fix some resource leaks in the error path of 'venus_probe()' If an error occurs after a successful 'of_icc_get()' call, it must be undone. Use 'devm_of_icc_get()' instead of 'of_icc_get()' to avoid the leak. Update the remove function accordingly and axe the now unneeded 'icc_put()' calls.

In the Linux kernel, the following vulnerability has been resolved: binder: fix async_free_space accounting for empty parcels In 4.13, commit 74310e06be4d ("android: binder: Move buffer out of area shared with user space") fixed a kernel structure visibility issue. As part of that patch, sizeof(void *) was used as the buffer size for 0-length data payloads so the driver could detect abusive clients sending 0-length asynchronous transactions to a server by enforcing limits on async_free_size. Unfortunately, on the "free" side, the accounting of async_free_space did not add the sizeof(void *) back. The result was that up to 8-bytes of async_free_space were leaked on every async transaction of 8-bytes or less. These small transactions are uncommon, so this accounting issue has gone undetected for several years. The fix is to use "buffer_size" (the allocated buffer size) instead of "size" (the logical buffer size) when updating the async_free_space during the free operation. These are the same except for this corner case of asynchronous transactions with payloads < 8 bytes.

In the Linux kernel, the following vulnerability has been resolved: fs/mount_setattr: always cleanup mount_kattr Make sure that finish_mount_kattr() is called after mount_kattr was succesfully built in both the success and failure case to prevent leaking any references we took when we built it. We returned early if path lookup failed thereby risking to leak an additional reference we took when building mount_kattr when an idmapped mount was requested.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()' DAMON debugfs interface increases the reference counts of 'struct pid's for targets from the 'target_ids' file write callback ('dbgfs_target_ids_write()'), but decreases the counts only in DAMON monitoring termination callback ('dbgfs_before_terminate()'). Therefore, when 'target_ids' file is repeatedly written without DAMON monitoring start/termination, the reference count is not decreased and therefore memory for the 'struct pid' cannot be freed. This commit fixes this issue by decreasing the reference counts when 'target_ids' is written.

In the Linux kernel, the following vulnerability has been resolved: mmc: uniphier-sd: Fix a resource leak in the remove function A 'tmio_mmc_host_free()' call is missing in the remove function, in order to balance a 'tmio_mmc_host_alloc()' call in the probe. This is done in the error handling path of the probe, but not in the remove function. Add the missing call.

An information disclosure vulnerability exists in the /proc/pid/syscall functionality of Linux Kernel 5.1 Stable and 5.4.66. More specifically, this issue has been introduced in v5.1-rc4 (commit 631b7abacd02b88f4b0795c08b54ad4fc3e7c7c0) and is still present in v5.10-rc4, so it’s likely that all versions in between are affected. An attacker can read /proc/pid/syscall to trigger this vulnerability, which leads to the kernel leaking memory contents.

A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to cause a 4 byte out-of-bounds read of XFRMA_MTIMER_THRESH when parsing netlink attributes, leading to potential leakage of sensitive heap data to userspace.

A memory disclosure flaw was found in the Linux kernel's versions before 4.18.0-193.el8 in the sysctl subsystem when reading the /proc/sys/kernel/rh_features file. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality.

In the Linux kernel through 3.1 there is an information disclosure issue via /proc/stat.

A logic bug flaw was found in Linux kernel before 5.8-rc1 in the implementation of SSBD. A bug in the logic handling allows an attacker with a local account to disable SSBD protection during a context switch when additional speculative execution mitigations are in place. This issue was introduced when the per task/process conditional STIPB switching was added on top of the existing SSBD switching. The highest threat from this vulnerability is to confidentiality.

When Akka HTTP before 10.5.2 accepts file uploads via the FileUploadDirectives.fileUploadAll directive, the temporary file it creates has too weak permissions: it is readable by other users on Linux or UNIX, a similar issue to CVE-2022-41946.

Insertion of Sensitive Information into Log File vulnerability in Hitachi Ops Center Administrator on Linux allows local users  to gain sensitive information.This issue affects Hitachi Ops Center Administrator: before 10.9.3-00.

Linux kernel through 3.1 allows local users to obtain sensitive keystroke information via access to /dev/pts/ and /dev/tty*.

A flaw was found in the Linux Kernel before 5.8-rc1 in the prctl() function, where it can be used to enable indirect branch speculation after it has been disabled. This call incorrectly reports it as being 'force disabled' when it is not and opens the system to Spectre v2 attacks. The highest threat from this vulnerability is to confidentiality.

A data leak flaw was found in the way XFS_IOC_ALLOCSP IOCTL in the XFS filesystem allowed for size increase of files with unaligned size. A local attacker could use this flaw to leak data on the XFS filesystem otherwise not accessible to them.

Exposure of sensitive information to an unauthorized actor in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated user to potentially enable information disclosure via local access.

IBM MQ 8.0, 9.0, and 9.1 could allow a local user to obtain sensitive credential information when a detailed technical error message is returned in a stack trace. IBM X-Force ID: 250398.

IBM MQ 8.0, 9.0, 9.1, 9.2, and 9.3 could disclose sensitive user information from a trace file if that functionality has been enabled. IBM X-Force ID: 251358.

IBM InfoSphere Information Server 11.7 could allow a local user to obtain sensitive information from a log files. IBM X-Force ID: 246463.

Due to a vulnerability in the io_uring subsystem, it is possible to leak kernel memory information to the user process. timens_install calls current_is_single_threaded to determine if the current process is single-threaded, but this call does not consider io_uring's io_worker threads, thus it is possible to insert a time namespace's vvar page to process's memory space via a page fault. When this time namespace is destroyed, the vvar page is also freed, but not removed from the process' memory, and a next page allocated by the kernel will be still available from the user-space process and can leak memory contents via this (read-only) use-after-free vulnerability. We recommend upgrading past version 5.10.161 or commit  788d0824269bef539fe31a785b1517882eafed93 https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/io_uring

IBM InfoSphere Information Server 11.7 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 244373.

The KVM implementation in the Linux kernel through 4.20.5 has an Information Leak.

A use-after-free vulnerability was found in iscsi_sw_tcp_session_create in drivers/scsi/iscsi_tcp.c in SCSI sub-component in the Linux Kernel. In this flaw an attacker could leak kernel internal information.

IBM MQ and IBM MQ Appliance 7.1, 7.5, 8.0, 9.0 LTS, 9.1 LTS, and 9.1 CD could allow a local attacker to obtain sensitive information by inclusion of sensitive data within runmqras data.

A flaw that boot CPU could be vulnerable for the speculative execution behavior kind of attacks in the Linux kernel X86 CPU Power management options functionality was found in the way user resuming CPU from suspend-to-RAM. A local user could use this flaw to potentially get unauthorized access to some memory of the CPU similar to the speculative execution behavior kind of attacks.

IBM MQ and IBM MQ Appliance 7.1, 7.5, 8.0, 9.0 LTS, 9.1 LTS, and 9.1 CD could allow a local attacker to obtain sensitive information by inclusion of sensitive data within trace. IBM X-Force ID: 168862.

A flaw possibility of memory leak in the Linux kernel cpu_entry_area mapping of X86 CPU data to memory was found in the way user can guess location of exception stack(s) or other important data. A local user could use this flaw to get access to some important data with expected location in memory.

Copy_from_user on 64-bit versions of the Linux kernel does not implement the __uaccess_begin_nospec allowing a user to bypass the "access_ok" check and pass a kernel pointer to copy_from_user(). This would allow an attacker to leak information. We recommend upgrading beyond commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47

In the Linux kernel, the following vulnerability has been resolved: drm/mcde: Fix refcount leak in mcde_dsi_bind Every iteration of for_each_available_child_of_node() decrements the reference counter of the previous node. There is no decrement when break out from the loop and results in refcount leak. Add missing of_node_put() to fix this.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix error handling in iavf_init_module() The iavf_init_module() won't destroy workqueue when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak")

In the Linux kernel, the following vulnerability has been resolved: igb: Initialize mailbox message for VF reset When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case.

In the Linux kernel, the following vulnerability has been resolved: net: macsec: Fix offload support for NETDEV_UNREGISTER event Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find() nf_osf_find() incorrectly returns true on mismatch, this leads to copying uninitialized memory area in nft_osf which can be used to leak stale kernel stack data to userspace.