In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free rx_data_reassembly skb on NCI device cleanup rx_data_reassembly skb is stored during NCI data exchange for processing fragmented packets. It is dropped only when the last fragment is processed or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received. However, the NCI device may be deallocated before that which leads to skb leak. As by design the rx_data_reassembly skb is bound to the NCI device and nothing prevents the device to be freed before the skb is processed in some way and cleaned, free it on the NCI device cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix missing folio cleanup in writeback race path In zswap_writeback_entry(), after we get a folio from __read_swap_cache_async(), we grab the tree lock again to check that the swap entry was not invalidated and recycled. If it was, we delete the folio we just added to the swap cache and exit. However, __read_swap_cache_async() returns the folio locked when it is newly allocated, which is always true for this path, and the folio is ref'd. Make sure to unlock and put the folio before returning. This was discovered by code inspection, probably because this path handles a race condition that should not happen often, and the bug would not crash the system, it will only strand the folio indefinitely.

In the Linux kernel, the following vulnerability has been resolved: xen/events: close evtchn after mapping cleanup shutdown_pirq and startup_pirq are not taking the irq_mapping_update_lock because they can't due to lock inversion. Both are called with the irq_desc->lock being taking. The lock order, however, is first irq_mapping_update_lock and then irq_desc->lock. This opens multiple races: - shutdown_pirq can be interrupted by a function that allocates an event channel: CPU0 CPU1 shutdown_pirq { xen_evtchn_close(e) __startup_pirq { EVTCHNOP_bind_pirq -> returns just freed evtchn e set_evtchn_to_irq(e, irq) } xen_irq_info_cleanup() { set_evtchn_to_irq(e, -1) } } Assume here event channel e refers here to the same event channel number. After this race the evtchn_to_irq mapping for e is invalid (-1). - __startup_pirq races with __unbind_from_irq in a similar way. Because __startup_pirq doesn't take irq_mapping_update_lock it can grab the evtchn that __unbind_from_irq is currently freeing and cleaning up. In this case even though the event channel is allocated, its mapping can be unset in evtchn_to_irq. The fix is to first cleanup the mappings and then close the event channel. In this way, when an event channel gets allocated it's potential previous evtchn_to_irq mappings are guaranteed to be unset already. This is also the reverse order of the allocation where first the event channel is allocated and then the mappings are setup. On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal [un]bind interfaces"), we hit a BUG like the following during probing of NVMe devices. The issue is that during nvme_setup_io_queues, pci_free_irq is called for every device which results in a call to shutdown_pirq. With many nvme devices it's therefore likely to hit this race during boot because there will be multiple calls to shutdown_pirq and startup_pirq are running potentially in parallel. ------------[ cut here ]------------ blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled kernel BUG at drivers/xen/events/events_base.c:499! invalid opcode: 0000 [#1] SMP PTI CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1 Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006 Workqueue: nvme-reset-wq nvme_reset_work RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0 Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? show_trace_log_lvl+0x1c1/0x2d9 ? show_trace_log_lvl+0x1c1/0x2d9 ? set_affinity_irq+0xdc/0x1c0 ? __die_body.cold+0x8/0xd ? die+0x2b/0x50 ? do_trap+0x90/0x110 ? bind_evtchn_to_cpu+0xdf/0xf0 ? do_error_trap+0x65/0x80 ? bind_evtchn_to_cpu+0xdf/0xf0 ? exc_invalid_op+0x4e/0x70 ? bind_evtchn_to_cpu+0xdf/0xf0 ? asm_exc_invalid_op+0x12/0x20 ? bind_evtchn_to_cpu+0xdf/0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: md: Don't register sync_thread for reshape directly Currently, if reshape is interrupted, then reassemble the array will register sync_thread directly from pers->run(), in this case 'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee that md_do_sync() will be executed, hence stop_sync_thread() will hang because 'MD_RECOVERY_RUNNING' can't be cleared. Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE, however, following hang can still be triggered by dm-raid test shell/lvconvert-raid-reshape.sh occasionally: [root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 Meanwhile mddev->recovery is: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Fix this problem by remove the code to register sync_thread directly from raid10 and raid5. And let md_check_recovery() to register sync_thread.

An issue was discovered in the FUSE filesystem implementation in the Linux kernel before 5.10.6, aka CID-5d069dbe8aaf. fuse_do_getattr() calls make_bad_inode() in inappropriate situations, causing a system crash. NOTE: the original fix for this vulnerability was incomplete, and its incompleteness is tracked as CVE-2021-28950.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") introduced a smatch warning about another conditional block in dpu_encoder_helper_phys_cleanup() which had assumed hw_pp will always be valid which may not necessarily be true. Lets fix the other conditional block by making sure hw_pp is valid before dereferencing it. Patchwork: https://patchwork.freedesktop.org/patch/574878/

A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).

In the Linux kernel, the following vulnerability has been resolved: afs: Fix page leak There's a loop in afs_extend_writeback() that adds extra pages to a write we want to make to improve the efficiency of the writeback by making it larger. This loop stops, however, if we hit a page we can't write back from immediately, but it doesn't get rid of the page ref we speculatively acquired. This was caused by the removal of the cleanup loop when the code switched from using find_get_pages_contig() to xarray scanning as the latter only gets a single page at a time, not a batch. Fix this by putting the page on a ref on an early break from the loop. Unfortunately, we can't just add that page to the pagevec we're employing as we'll go through that and add those pages to the RPC call. This was found by the generic/074 test. It leaks ~4GiB of RAM each time it is run - which can be observed with "top".

In the Linux kernel, the following vulnerability has been resolved: tpm: Clean up TPM space after command failure tpm_dev_transmit prepares the TPM space before attempting command transmission. However if the command fails no rollback of this preparation is done. This can result in transient handles being leaked if the device is subsequently closed with no further commands performed. Fix this by flushing the space in the event of command transmission failure.

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: Fix ali_drw_pmu driver interrupt status clearing The alibaba_uncore_pmu driver forgot to clear all interrupt status in the interrupt processing function. After the PMU counter overflow interrupt occurred, an interrupt storm occurred, causing the system to hang. Therefore, clear the correct interrupt status in the interrupt handling function to fix it.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Update cpu_sibling_map when disabling nonboot CPUs Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails If the dpu_format_populate_layout() fails, then FB is prepared, but not cleaned up. This ends up leaking the pin_count on the GEM object and causes a splat during DRM file closure: msm_obj->pin_count WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc [...] Call trace: update_lru_locked+0xc4/0xcc put_pages+0xac/0x100 msm_gem_free_object+0x138/0x180 drm_gem_object_free+0x1c/0x30 drm_gem_object_handle_put_unlocked+0x108/0x10c drm_gem_object_release_handle+0x58/0x70 idr_for_each+0x68/0xec drm_gem_release+0x28/0x40 drm_file_free+0x174/0x234 drm_release+0xb0/0x160 __fput+0xc0/0x2c8 __fput_sync+0x50/0x5c __arm64_sys_close+0x38/0x7c invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x120 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 irq event stamp: 129818 hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124 hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8 softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20 Patchwork: https://patchwork.freedesktop.org/patch/600714/

In the Linux kernel, the following vulnerability has been resolved: bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input arguments, zero the value for the case of an error as otherwise it could leak memory. For tracing, it is not needed given CAP_PERFMON can already read all kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped in here. Also, the MTU helpers mtu_len pointer value is being written but also read. Technically, the MEM_UNINIT should not be there in order to always force init. Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now implies two things actually: i) write into memory, ii) memory does not have to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory, ii) memory must be initialized. This means that for bpf_*_check_mtu() we're readding the issue we're trying to fix, that is, it would then be able to write back into things like .rodata BPF maps. Follow-up work will rework the MEM_UNINIT semantics such that the intent can be better expressed. For now just clear the *mtu_len on error path which can be lifted later again.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix mlx5e_priv_init() cleanup flow When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK>

In the Linux kernel, the following vulnerability has been resolved: mm: avoid leaving partial pfn mappings around in error case As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup() If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop up the damage. If it fails early enough, before xhci->interrupters is allocated but after xhci->max_interrupters has been set, which happens in most (all?) cases, things get uglier, as xhci_mem_cleanup() unconditionally derefences xhci->interrupters. With prejudice. Gate the interrupt freeing loop with a check on xhci->interrupters being non-NULL. Found while debugging a DMA allocation issue that led the XHCI driver on this exact path.

In the Linux kernel, the following vulnerability has been resolved: sch_hfsc: make hfsc_qlen_notify() idempotent hfsc_qlen_notify() is not idempotent either and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life: 1. update_vf() decreases cl->cl_nactive, so we can check whether it is non-zero before calling it. 2. eltree_remove() always removes RB node cl->el_node, but we can use RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.

In the Linux kernel, the following vulnerability has been resolved: net/smc: remove device from smcd_dev_list after failed device_add() If the device_add() for a smcd_dev fails, there's no cleanup step that rolls back the earlier list_add(). The device subsequently gets freed, and we end up with a corrupted list. Add some error handling that removes the device from the list.

In the Linux kernel, the following vulnerability has been resolved: net: veth: clear GRO when clearing XDP even when down veth sets NETIF_F_GRO automatically when XDP is enabled, because both features use the same NAPI machinery. The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which is called both on ndo_stop and when XDP is turned off. To avoid the flag from being cleared when the device is brought down, the clearing is skipped when IFF_UP is not set. Bringing the device down should indeed not modify its features. Unfortunately, this means that clearing is also skipped when XDP is disabled _while_ the device is down. And there's nothing on the open path to bring the device features back into sync. IOW if user enables XDP, disables it and then brings the device up we'll end up with a stray GRO flag set but no NAPI instances. We don't depend on the GRO flag on the datapath, so the datapath won't crash. We will crash (or hang), however, next time features are sync'ed (either by user via ethtool or peer changing its config). The GRO flag will go away, and veth will try to disable the NAPIs. But the open path never created them since XDP was off, the GRO flag was a stray. If NAPI was initialized before we'll hang in napi_disable(). If it never was we'll crash trying to stop uninitialized hrtimer. Move the GRO flag updates to the XDP enable / disable paths, instead of mixing them with the ndo_open / ndo_close paths.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Avoid smp_processor_id() in preemptible code The BUG message "BUG: using smp_processor_id() in preemptible [00000000] code" was observed for TCMU devices with kernel config DEBUG_PREEMPT. The message was observed when blktests block/005 was run on TCMU devices with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the symptom. The commit modified work queue to handle commands and changed 'current->nr_cpu_allowed' at smp_processor_id() call. The message was also observed at system shutdown when TCMU devices were not cleaned up [2]. The function smp_processor_id() was called in SCSI host work queue for abort handling, and triggered the BUG message. This symptom was observed regardless of the commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper"). To avoid the preemptible code check at smp_processor_id(), get CPU ID with raw_smp_processor_id() instead. The CPU ID is used for performance improvement then thread move to other CPU will not affect the code. [1] [ 56.468103] run blktests block/005 at 2021-05-12 14:16:38 [ 57.369473] check_preemption_disabled: 85 callbacks suppressed [ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511 [ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510 [ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506 [ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.369617] Call Trace: [ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507 [ 57.369628] dump_stack+0x6d/0x89 [ 57.369642] check_preemption_disabled+0xc8/0xd0 [ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod] [ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] [ 57.369744] scsi_queue_rq+0x38e/0xc40 [ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0 [ 57.369779] blk_mq_try_issue_directly+0x43/0x90 [ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0 [ 57.369812] submit_bio_noacct+0x46e/0x4e0 [ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0 [ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60 [ 57.369880] generic_file_read_iter+0x89/0x160 [ 57.369898] blkdev_read_iter+0x44/0x60 [ 57.369906] new_sync_read+0x102/0x170 [ 57.369929] vfs_read+0xd4/0x160 [ 57.369941] __x64_sys_pread64+0x6e/0xa0 [ 57.369946] ? lockdep_hardirqs_on+0x79/0x100 [ 57.369958] do_syscall_64+0x3a/0x70 [ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 57.369973] RIP: 0033:0x7f7ed4c1399f [ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b [ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f [ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009 [ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001 [ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70 [ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568 [ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.370039] Call Trace: [ 57.370045] dump_stack+0x6d/0x89 [ 57.370056] ch ---truncated---

In the Linux kernel, the following vulnerability has been resolved: afs: Fix server->active leak in afs_put_server The atomic_read was accidentally replaced with atomic_inc_return, which prevents the server from getting cleaned up and causes rmmod to hang with a warning: Can't purge s=00000001

In the Linux kernel, the following vulnerability has been resolved: ixgbevf: Fix resource leak in ixgbevf_init_module() ixgbevf_init_module() won't destroy the workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Add destroy_workqueue() in fail path to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak")

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Cleanup partial engine discovery failures If we abort driver initialisation in the middle of gt/engine discovery, some engines will be fully setup and some not. Those incompletely setup engines only have 'engine->release == NULL' and so will leak any of the common objects allocated. v2: - Drop the destroy_pinned_context() helper for now. It's not really worth it with just a single callsite at the moment. (Janusz)

In the Linux kernel, the following vulnerability has been resolved: net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when run_delalloc_nocow() failed [BUG] With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash with the following VM_BUG_ON_FOLIO(): BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28 BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28 page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664 aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774" flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff) page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) ------------[ cut here ]------------ kernel BUG at mm/page-writeback.c:2992! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : folio_clear_dirty_for_io+0x128/0x258 lr : folio_clear_dirty_for_io+0x128/0x258 Call trace: folio_clear_dirty_for_io+0x128/0x258 btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs] __process_folios_contig+0x154/0x268 [btrfs] extent_clear_unlock_delalloc+0x5c/0x80 [btrfs] run_delalloc_nocow+0x5f8/0x760 [btrfs] btrfs_run_delalloc_range+0xa8/0x220 [btrfs] writepage_delalloc+0x230/0x4c8 [btrfs] extent_writepage+0xb8/0x358 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x178/0x3a8 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] The first two lines of extra debug messages show the problem is caused by the error handling of run_delalloc_nocow(). E.g. we have the following dirtied range (4K blocksize 4K page size): 0 16K 32K |//////////////////////////////////////| | Pre-allocated | And the range [0, 16K) has a preallocated extent. - Enter run_delalloc_nocow() for range [0, 16K) Which found range [0, 16K) is preallocated, can do the proper NOCOW write. - Enter fallback_to_fow() for range [16K, 32K) Since the range [16K, 32K) is not backed by preallocated extent, we have to go COW. - cow_file_range() failed for range [16K, 32K) So cow_file_range() will do the clean up by clearing folio dirty, unlock the folios. Now the folios in range [16K, 32K) is unlocked. - Enter extent_clear_unlock_delalloc() from run_delalloc_nocow() Which is called with PAGE_START_WRITEBACK to start page writeback. But folios can only be marked writeback when it's properly locked, thus this triggered the VM_BUG_ON_FOLIO(). Furthermore there is another hidden but common bug that run_delalloc_nocow() is not clearing the folio dirty flags in its error handling path. This is the common bug shared between run_delalloc_nocow() and cow_file_range(). [FIX] - Clear folio dirty for range [@start, @cur_offset) Introduce a helper, cleanup_dirty_folios(), which will find and lock the folio in the range, clear the dirty flag and start/end the writeback, with the extra handling for the @locked_folio. - Introduce a helper to clear folio dirty, start and end writeback - Introduce a helper to record the last failed COW range end This is to trace which range we should skip, to avoid double unlocking. - Skip the failed COW range for the e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when cow_file_range() failed [BUG] When testing with COW fixup marked as BUG_ON() (this is involved with the new pin_user_pages*() change, which should not result new out-of-band dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW fixup path. This BUG_ON() happens just after a failed btrfs_run_delalloc_range(): BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1444! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : extent_writepage_io+0x2d4/0x308 [btrfs] lr : extent_writepage_io+0x2d4/0x308 [btrfs] Call trace: extent_writepage_io+0x2d4/0x308 [btrfs] extent_writepage+0x218/0x330 [btrfs] extent_write_cache_pages+0x1d4/0x4b0 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x180/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] That failure is mostly from cow_file_range(), where we can hit -ENOSPC. Although the -ENOSPC is already a bug related to our space reservation code, let's just focus on the error handling. For example, we have the following dirty range [0, 64K) of an inode, with 4K sector size and 4K page size: 0 16K 32K 48K 64K |///////////////////////////////////////| |#######################################| Where |///| means page are still dirty, and |###| means the extent io tree has EXTENT_DELALLOC flag. - Enter extent_writepage() for page 0 - Enter btrfs_run_delalloc_range() for range [0, 64K) - Enter cow_file_range() for range [0, 64K) - Function btrfs_reserve_extent() only reserved one 16K extent So we created extent map and ordered extent for range [0, 16K) 0 16K 32K 48K 64K |////////|//////////////////////////////| |<- OE ->|##############################| And range [0, 16K) has its delalloc flag cleared. But since we haven't yet submit any bio, involved 4 pages are still dirty. - Function btrfs_reserve_extent() returns with -ENOSPC Now we have to run error cleanup, which will clear all EXTENT_DELALLOC* flags and clear the dirty flags for the remaining ranges: 0 16K 32K 48K 64K |////////| | | | | Note that range [0, 16K) still has its pages dirty. - Some time later, writeback is triggered again for the range [0, 16K) since the page range still has dirty flags. - btrfs_run_delalloc_range() will do nothing because there is no EXTENT_DELALLOC flag. - extent_writepage_io() finds page 0 has no ordered flag Which falls into the COW fixup path, triggering the BUG_ON(). Unfortunately this error handling bug dates back to the introduction of btrfs. Thankfully with the abuse of COW fixup, at least it won't crash the kernel. [FIX] Instead of immediately unlocking the extent and folios, we keep the extent and folios locked until either erroring out or the whole delalloc range finished. When the whole delalloc range finished without error, we just unlock the whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked cases) ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid undefined behavior: applying zero offset to null pointer ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master.

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() Subject: [PATCH] drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() If some the pages or sgt allocation failed, we shouldn't release the pages ref we got earlier, otherwise we will end up with unbalanced get/put_pages() calls. We should instead leave everything in place and let the BO release function deal with extra cleanup when the object is destroyed, or let the fault handler try again next time it's called.

In the Linux kernel, the following vulnerability has been resolved: riscv: Fix loading 64-bit NOMMU kernels past the start of RAM commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") added logic to allow using RAM below the kernel load address. However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the kernel load address. Since that range of memory corresponds to PFNs below ARCH_PFN_OFFSET, mm initialization runs off the beginning of mem_map and corrupts adjacent kernel memory. Fix this by restoring the previous behavior for NOMMU kernels.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Fix handling of zero block length packets While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX set to 65536, it has been observed that we receive short packets, which come at interval of 5-10 seconds sometimes and have block length zero but still contain 1-2 valid datagrams present. According to the NCM spec: "If wBlockLength = 0x0000, the block is terminated by a short packet. In this case, the USB transfer must still be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent, and the size is a multiple of wMaxPacketSize for the given pipe, then no ZLP shall be sent. wBlockLength= 0x0000 must be used with extreme care, because of the possibility that the host and device may get out of sync, and because of test issues. wBlockLength = 0x0000 allows the sender to reduce latency by starting to send a very large NTB, and then shortening it when the sender discovers that there’s not sufficient data to justify sending a large NTB" However, there is a potential issue with the current implementation, as it checks for the occurrence of multiple NTBs in a single giveback by verifying if the leftover bytes to be processed is zero or not. If the block length reads zero, we would process the same NTB infintely because the leftover bytes is never zero and it leads to a crash. Fix this by bailing out if block length reads zero.

In the Linux kernel, the following vulnerability has been resolved: drm/ast: Fix soft lockup There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough.

In the Linux kernel, the following vulnerability has been resolved: pds_core: Fix pdsc_check_pci_health function to use work thread When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: <TASK> ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix oops during rmmod on single-CPU platforms During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1470e1067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57 Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 RIP: 0010:mutex_lock+0x2e/0x50 ... Call Trace: <TASK> __die+0x24/0x70 page_fault_oops+0x82/0x160 do_user_addr_fault+0x65/0x6b0 __pfx___rdmsr_safe_on_cpu+0x10/0x10 exc_page_fault+0x7d/0x170 asm_exc_page_fault+0x26/0x30 mutex_lock+0x2e/0x50 mutex_lock+0x1e/0x50 perf_pmu_migrate_context+0x87/0x1f0 perf_event_cpu_offline+0x76/0x90 [idxd] cpuhp_invoke_callback+0xa2/0x4f0 __pfx_perf_event_cpu_offline+0x10/0x10 [idxd] cpuhp_thread_fun+0x98/0x150 smpboot_thread_fn+0x27/0x260 smpboot_thread_fn+0x1af/0x260 __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x103/0x140 __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 <TASK> Fix the issue by preventing the migration of the perf context to an invalid target.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rules rx_create no longer allocates a modify_hdr instance that needs to be cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer dereference. A leak in the rules also previously occurred since there are now two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00 <snip>

In the Linux kernel, the following vulnerability has been resolved: block: fix q->blkg_list corruption during disk rebind Multiple gendisk instances can allocated/added for single request queue in case of disk rebind. blkg may still stay in q->blkg_list when calling blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted. Fix the list corruption issue by: - add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only - move calling blkg_init_queue() into blk_alloc_queue() The list corruption should be started since commit f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()") which delays removing blkg from q->blkg_list into blkg_free_workfn().

In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: stop interface during shutdown The mlxbf_gige driver intermittantly encounters a NULL pointer exception while the system is shutting down via "reboot" command. The mlxbf_driver will experience an exception right after executing its shutdown() method. One example of this exception is: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000 [0000000000000070] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1 Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] sp : ffff8000080d3c10 x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58 x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008 x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128 x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7 x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404 x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080 x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] __napi_poll+0x40/0x1c8 net_rx_action+0x314/0x3a0 __do_softirq+0x128/0x334 run_ksoftirqd+0x54/0x6c smpboot_thread_fn+0x14c/0x190 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002) ---[ end trace 7cc3941aa0d8e6a4 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x4ce722520000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x000005c1,a3330e5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- During system shutdown, the mlxbf_gige driver's shutdown() is always executed. However, the driver's stop() method will only execute if networking interface configuration logic within the Linux distribution has been setup to do so. If shutdown() executes but stop() does not execute, NAPI remains enabled and this can lead to an exception if NAPI is scheduled while the hardware interface has only been partially deinitialized. The networking interface managed by the mlxbf_gige driver must be properly stopped during system shutdown so that IFF_UP is cleared, the hardware interface is put into a clean state, and NAPI is fully deinitialized.

In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Fix TLBI RANGE operand KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty pages are collected by VMM and the page table entries become write protected during live migration. Unfortunately, the operand passed to the TLBI RANGE instruction isn't correctly sorted out due to the commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()"). It leads to crash on the destination VM after live migration because TLBs aren't flushed completely and some of the dirty pages are missed. For example, I have a VM where 8GB memory is assigned, starting from 0x40000000 (1GB). Note that the host has 4KB as the base page size. In the middile of migration, kvm_tlb_flush_vmid_range() is executed to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to __kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3 and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop in the __flush_tlb_range_op() until the variable @scale underflows and becomes -9, 0xffff708000040000 is set as the operand. The operand is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to invalid @scale and @num. Fix it by extending __TLBI_RANGE_NUM() to support the combination of SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can be returned from the macro, meaning the TLBs for 0x200000 pages in the above example can be flushed in one shoot with SCALE#3 and NUM#31. The macro TLBI_RANGE_MASK is dropped since no one uses it any more. The comments are also adjusted accordingly.

In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix memory leak when bringing down interface When bringing down the TX rings we flush the rings but forget to reclaimed the flushed packets. This leads to a memory leak since we do not free the dma mapped buffers. This also leads to tx control block corruption when bringing down the interface for power management.

In the Linux kernel, the following vulnerability has been resolved: bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: prevent kernel-infoleak syzbot found that tcf_skbmod_dump() was copying four bytes from kernel stack to user space [1]. The issue here is that 'struct tc_skbmod' has a four bytes hole. We need to clear the structure before filling fields. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline] netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242 __do_sys_recvfrom net/socket.c:2260 [inline] __se_sys_recvfrom net/socket.c:2256 [inline] __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253 netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317 netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351 nlmsg_unicast include/net/netlink.h:1144 [inline] nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610 rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741 rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline] tcf_add_notify net/sched/act_api.c:2048 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: __nla_put lib/nlattr.c:1041 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1099 tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251 tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628 tcf_add_notify_msg net/sched/act_api.c:2023 [inline] tcf_add_notify net/sched/act_api.c:2042 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netli ---truncated---

In the Linux kernel, the following vulnerability has been resolved: spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe In function pci1xxxx_spi_probe, there is a potential null pointer that may be caused by a failed memory allocation by the function devm_kzalloc. Hence, a null pointer check needs to be added to prevent null pointer dereferencing later in the code. To fix this issue, spi_bus->spi_int[iter] should be checked. The memory allocated by devm_kzalloc will be automatically released, so just directly return -ENOMEM without worrying about memory leaks.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI.

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen.

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix overflow check in io_recvmsg_mshot_prep() The "controllen" variable is type size_t (unsigned long). Casting it to int could lead to an integer underflow. The check_add_overflow() function considers the type of the destination which is type int. If we add two positive values and the result cannot fit in an integer then that's counted as an overflow. However, if we cast "controllen" to an int and it turns negative, then negative values *can* fit into an int type so there is no overflow. Good: 100 + (unsigned long)-4 = 96 <-- overflow Bad: 100 + (int)-4 = 96 <-- no overflow I deleted the cast of the sizeof() as well. That's not a bug but the cast is unnecessary.

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer() In the for statement of lbs_allocate_cmd_buffer(), if the allocation of cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer().

In the Linux kernel, the following vulnerability has been resolved: net: tls, fix WARNIING in __sk_msg_free A splice with MSG_SPLICE_PAGES will cause tls code to use the tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user provided pages from the msg into the msg_pl. This will loop over the msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user can also set the MORE flag to hint stack to delay sending until receiving more pages and ideally a full buffer. If the user adds more pages to the msg than can fit in the msg_pl scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send the buffer anyways. What actually happens though is we abort the msg to msg_pl scatterlist setup and then because we forget to set 'full record' indicating we can no longer consume data without a send we fallthrough to the 'continue' path which will check if msg_data_left(msg) has more bytes to send and then attempts to fit them in the already full msg_pl. Then next iteration of sender doing send will encounter a full msg_pl and throw the warning in the syzbot report. To fix simply check if we have a full_record in splice code path and if not send the msg regardless of MORE flag.

In the Linux kernel, the following vulnerability has been resolved: btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks() The unhandled case in btrfs_relocate_sys_chunks() loop is a corruption, as it could be caused only by two impossible conditions: - at first the search key is set up to look for a chunk tree item, with offset -1, this is an inexact search and the key->offset will contain the correct offset upon a successful search, a valid chunk tree item cannot have an offset -1 - after first successful search, the found_key corresponds to a chunk item, the offset is decremented by 1 before the next loop, it's impossible to find a chunk item there due to alignment and size constraints

In the Linux kernel, the following vulnerability has been resolved: fpga: region: add owner module and take its refcount The current implementation of the fpga region assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the region during programming if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_region struct and use it to take the module's refcount. Modify the functions for registering a region to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the region as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a region without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga region.

In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid negative index with array access Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") assigns prev_idata = idatas[i - 1], but doesn't check that the iterator i is greater than zero. Let's fix this by adding a check.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix loop termination condition in gss_free_in_token_pages() The in_token->pages[] array is not NULL terminated. This results in the following KASAN splat: KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f]