In the Linux kernel, the following vulnerability has been resolved: net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket When using a BPF program on kernel_connect(), the call can return -EPERM. This causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing the kernel to potentially freeze up. Neil suggested: This will propagate -EPERM up into other layers which might not be ready to handle it. It might be safer to map EPERM to an error we would be more likely to expect from the network system - such as ECONNREFUSED or ENETDOWN. ECONNREFUSED as error seems reasonable. For programs setting a different error can be out of reach (see handling in 4fbac77d2d09) in particular on kernels which do not have f10d05966196 ("bpf: Make BPF_PROG_RUN_ARRAY return -err instead of allow boolean"), thus given that it is better to simply remap for consistent behavior. UDP does handle EPERM in xs_udp_send_request().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Ignore too large handle values in BIG hci_le_big_sync_established_evt is necessary to filter out cases where the handle value is belonging to ida id range, otherwise ida will be erroneously released in hci_conn_cleanup.

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: initialize num_q_vectors for MSI/INTx interrupts When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized. Thus there will be kernel panic in wx_alloc_q_vectors() to allocate queue vectors.

AESM daemon in Intel Software Guard Extensions Platform Software Component for Linux before 2.1.102 can effectively be disabled by a local attacker creating a denial of services like remote attestation provided by the AESM.

In the Linux kernel, the following vulnerability has been resolved: netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id], but the function is exposed to user space before the entry is allocated via register_pernet_subsys(). Let's call register_pernet_subsys() before xt_register_template().

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it.

In the Linux kernel, the following vulnerability has been resolved: ipvs: properly dereference pe in ip_vs_add_service Use pe directly to resolve sparse warning: net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression

In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did.

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path Dan Carpenter reported a Smack static checker warning: fs/smb/client/cifsfs.c:1981 init_cifs() error: we previously assumed 'serverclose_wq' could be null (see line 1895) The patch which introduced the serverclose workqueue used the wrong oredering in error paths in init_cifs() for freeing it on errors.

In the Linux kernel, the following vulnerability has been resolved: leds: an30259a: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead.

In the Linux kernel, the following vulnerability has been resolved: ext4: check dot and dotdot of dx_root before making dir indexed Syzbot reports a issue as follows: ============================================ BUG: unable to handle page fault for address: ffffed11022e24fe PGD 23ffee067 P4D 23ffee067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 5079 Comm: syz-executor306 Not tainted 6.10.0-rc5-g55027e689933 #0 Call Trace: <TASK> make_indexed_dir+0xdaf/0x13c0 fs/ext4/namei.c:2341 ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2451 ext4_rename fs/ext4/namei.c:3936 [inline] ext4_rename2+0x26e5/0x4370 fs/ext4/namei.c:4214 [...] ============================================ The immediate cause of this problem is that there is only one valid dentry for the block to be split during do_split, so split==0 results in out of bounds accesses to the map triggering the issue. do_split unsigned split dx_make_map count = 1 split = count/2 = 0; continued = hash2 == map[split - 1].hash; ---> map[4294967295] The maximum length of a filename is 255 and the minimum block size is 1024, so it is always guaranteed that the number of entries is greater than or equal to 2 when do_split() is called. But syzbot's crafted image has no dot and dotdot in dir, and the dentry distribution in dirblock is as follows: bus dentry1 hole dentry2 free |xx--|xx-------------|...............|xx-------------|...............| 0 12 (8+248)=256 268 256 524 (8+256)=264 788 236 1024 So when renaming dentry1 increases its name_len length by 1, neither hole nor free is sufficient to hold the new dentry, and make_indexed_dir() is called. In make_indexed_dir() it is assumed that the first two entries of the dirblock must be dot and dotdot, so bus and dentry1 are left in dx_root because they are treated as dot and dotdot, and only dentry2 is moved to the new leaf block. That's why count is equal to 1. Therefore add the ext4_check_dx_root() helper function to add more sanity checks to dot and dotdot before starting the conversion to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TC ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Validate passed in drm syncobj handles in the performance extension If userspace provides an unknown or invalid handle anywhere in the handle array the rest of the driver will not handle that well. Fix it by checking handle was looked up successfully or otherwise fail the extension by jumping into the existing unwind. (cherry picked from commit a546b7e4d73c23838d7e4d2c92882b3ca902d213)

In the Linux kernel, the following vulnerability has been resolved: nfsd: initialise nfsd_info.mutex early. nfsd_info.mutex can be dereferenced by svc_pool_stats_start() immediately after the new netns is created. Currently this can trigger an oops. Move the initialisation earlier before it can possibly be dereferenced.

In the Linux kernel, the following vulnerability has been resolved: bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro() set_memory_ro() can fail, leaving memory unprotected. Check its return and take it into account as an error.

In the Linux kernel, the following vulnerability has been resolved: x86/bhi: Avoid warning in #DB handler due to BHI mitigation When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler (exc_debug_kernel()) to issue a warning because single-step is used outside the entry_SYSENTER_compat() function. To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY after making sure the TF flag is cleared. The problem can be reproduced with the following sequence: $ cat sysenter_step.c int main() { asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); } $ gcc -o sysenter_step sysenter_step.c $ ./sysenter_step Segmentation fault (core dumped) The program is expected to crash, and the #DB handler will issue a warning. Kernel log: WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160 ... RIP: 0010:exc_debug_kernel+0xd2/0x160 ... Call Trace: <#DB> ? show_regs+0x68/0x80 ? __warn+0x8c/0x140 ? exc_debug_kernel+0xd2/0x160 ? report_bug+0x175/0x1a0 ? handle_bug+0x44/0x90 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? exc_debug_kernel+0xd2/0x160 exc_debug+0x43/0x50 asm_exc_debug+0x1e/0x40 RIP: 0010:clear_bhb_loop+0x0/0xb0 ... </#DB> <TASK> ? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d </TASK> [ bp: Massage commit message. ]

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix error pbuf checking Syz reports a problem, which boils down to NULL vs IS_ERR inconsistent error handling in io_alloc_pbuf_ring(). KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__io_remove_buffers+0xac/0x700 io_uring/kbuf.c:341 Call Trace: <TASK> io_put_bl io_uring/kbuf.c:378 [inline] io_destroy_buffers+0x14e/0x490 io_uring/kbuf.c:392 io_ring_ctx_free+0xa00/0x1070 io_uring/io_uring.c:2613 io_ring_exit_work+0x80f/0x8a0 io_uring/io_uring.c:2844 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL pointer check for kzalloc [Why & How] Check return pointer of kzalloc before using it.

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: adjust the position to init iso data anchor MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000 [ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001 [ 17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001 [ 17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000 [ 17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011 [ 17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588 [ 17.268404] Call trace: [ 17.270841] usb_kill_anchored_urbs+0x60/0x168 [ 17.275274] btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)] [ 17.284226] btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)] [ 17.292652] btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)] [ 17.300818] usb_unbind_interface+0xc4/0x240 [ 17.305079] device_release_driver_internal+0x18c/0x258 [ 17.310296] device_release_driver+0x1c/0x30 [ 17.314557] bus_remove_device+0x140/0x160 [ 17.318643] device_del+0x1c0/0x330 [ 17.322121] usb_disable_device+0x80/0x180 [ 17.326207] usb_disconnect+0xec/0x300 [ 17.329948] hub_quiesce+0x80/0xd0 [ 17.333339] hub_disconnect+0x44/0x190 [ 17.337078] usb_unbind_interface+0xc4/0x240 [ 17.341337] device_release_driver_internal+0x18c/0x258 [ 17.346551] device_release_driver+0x1c/0x30 [ 17.350810] usb_driver_release_interface+0x70/0x88 [ 17.355677] proc_ioctl+0x13c/0x228 [ 17.359157] proc_ioctl_default+0x50/0x80 [ 17.363155] usbdev_ioctl+0x830/0xd08 [ 17.366808] __arm64_sys_ioctl+0x94/0xd0 [ 17.370723] invoke_syscall+0x6c/0xf8 [ 17.374377] el0_svc_common+0x84/0xe0 [ 17.378030] do_el0_svc+0x20/0x30 [ 17.381334] el0_svc+0x34/0x60 [ 17.384382] el0t_64_sync_handler+0x88/0xf0 [ 17.388554] el0t_64_sync+0x180/0x188 [ 17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288) [ 17.398289] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: IB/core: Implement a limit on UMAD receive List The existing behavior of ib_umad, which maintains received MAD packets in an unbounded list, poses a risk of uncontrolled growth. As user-space applications extract packets from this list, the rate of extraction may not match the rate of incoming packets, leading to potential list overflow. To address this, we introduce a limit to the size of the list. After considering typical scenarios, such as OpenSM processing, which can handle approximately 100k packets per second, and the 1-second retry timeout for most packets, we set the list size limit to 200k. Packets received beyond this limit are dropped, assuming they are likely timed out by the time they are handled by user-space. Notably, packets queued on the receive list due to reasons like timed-out sends are preserved even when the list is full.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask() When I try to manually set bitrates: iw wlan0 set bitrates legacy-2.4 1 I get sleeping from invalid context error, see below. Fix that by switching to use recently introduced ieee80211_iterate_stations_mtx(). Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware even supports bitrate WMI commands and should we consider disabling ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch. BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath12k/wmi.c:420 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 2236, name: iw preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 3 locks held by iw/2236: #0: ffffffffabc6f1d8 (cb_lock){++++}-{3:3}, at: genl_rcv+0x14/0x40 #1: ffff888138410810 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: nl80211_pre_doit+0x54d/0x800 [cfg80211] #2: ffffffffab2cfaa0 (rcu_read_lock){....}-{1:2}, at: ieee80211_iterate_stations_atomic+0x2f/0x200 [mac80211] CPU: 3 UID: 0 PID: 2236 Comm: iw Not tainted 6.11.0-rc7-wt-ath+ #1772 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0xa4/0xe0 dump_stack+0x10/0x20 __might_resched+0x363/0x5a0 ? __alloc_skb+0x165/0x340 __might_sleep+0xad/0x160 ath12k_wmi_cmd_send+0xb1/0x3d0 [ath12k] ? ath12k_wmi_init_wcn7850+0xa40/0xa40 [ath12k] ? __netdev_alloc_skb+0x45/0x7b0 ? __asan_memset+0x39/0x40 ? ath12k_wmi_alloc_skb+0xf0/0x150 [ath12k] ? reacquire_held_locks+0x4d0/0x4d0 ath12k_wmi_set_peer_param+0x340/0x5b0 [ath12k] ath12k_mac_disable_peer_fixed_rate+0xa3/0x110 [ath12k] ? ath12k_mac_vdev_stop+0x4f0/0x4f0 [ath12k] ieee80211_iterate_stations_atomic+0xd4/0x200 [mac80211] ath12k_mac_op_set_bitrate_mask+0x5d2/0x1080 [ath12k] ? ath12k_mac_vif_chan+0x320/0x320 [ath12k] drv_set_bitrate_mask+0x267/0x470 [mac80211] ieee80211_set_bitrate_mask+0x4cc/0x8a0 [mac80211] ? __this_cpu_preempt_check+0x13/0x20 nl80211_set_tx_bitrate_mask+0x2bc/0x530 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? trace_contention_end+0xef/0x140 ? rtnl_unlock+0x9/0x10 ? nl80211_pre_doit+0x557/0x800 [cfg80211] genl_family_rcv_msg_doit+0x1f0/0x2e0 ? genl_family_rcv_msg_attrs_parse.isra.0+0x250/0x250 ? ns_capable+0x57/0xd0 genl_family_rcv_msg+0x34c/0x600 ? genl_family_rcv_msg_dumpit+0x310/0x310 ? __lock_acquire+0xc62/0x1de0 ? he_set_mcs_mask.isra.0+0x8d0/0x8d0 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? cfg80211_external_auth_request+0x690/0x690 [cfg80211] genl_rcv_msg+0xa0/0x130 netlink_rcv_skb+0x14c/0x400 ? genl_family_rcv_msg+0x600/0x600 ? netlink_ack+0xd70/0xd70 ? rwsem_optimistic_spin+0x4f0/0x4f0 ? genl_rcv+0x14/0x40 ? down_read_killable+0x580/0x580 ? netlink_deliver_tap+0x13e/0x350 ? __this_cpu_preempt_check+0x13/0x20 genl_rcv+0x23/0x40 netlink_unicast+0x45e/0x790 ? netlink_attachskb+0x7f0/0x7f0 netlink_sendmsg+0x7eb/0xdb0 ? netlink_unicast+0x790/0x790 ? __this_cpu_preempt_check+0x13/0x20 ? selinux_socket_sendmsg+0x31/0x40 ? netlink_unicast+0x790/0x790 __sock_sendmsg+0xc9/0x160 ____sys_sendmsg+0x620/0x990 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x410/0x410 ? __kasan_check_read+0x11/0x20 ? mark_lock+0xe6/0x1470 ___sys_sendmsg+0xe9/0x170 ? copy_msghdr_from_user+0x120/0x120 ? __lock_acquire+0xc62/0x1de0 ? do_fault_around+0x2c6/0x4e0 ? do_user_addr_fault+0x8c1/0xde0 ? reacquire_held_locks+0x220/0x4d0 ? do_user_addr_fault+0x8c1/0xde0 ? __kasan_check_read+0x11/0x20 ? __fdget+0x4e/0x1d0 ? sockfd_lookup_light+0x1a/0x170 __sys_sendmsg+0xd2/0x180 ? __sys_sendmsg_sock+0x20/0x20 ? reacquire_held_locks+0x4d0/0x4d0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_sendmsg+0x72/0xb0 ? lockdep_hardirqs_on+0x7d/0x100 x64_sys_call+0x894/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: inet_diag: Initialize pad field in struct inet_diag_req_v2 KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: sysctl: always initialize i_uid/i_gid Always initialize i_uid/i_gid inside the sysfs core so set_ownership() can safely skip setting them. Commit 5ec27ec735ba ("fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when set_ownership() was not implemented. It also missed adjusting net_ctl_set_ownership() to use the same default values in case the computation of a better value failed.

In the Linux kernel, the following vulnerability has been resolved: riscv: Sparse-Memory/vmemmap out-of-bounds fix Offset vmemmap so that the first page of vmemmap will be mapped to the first page of physical memory in order to ensure that vmemmap’s bounds will be respected during pfn_to_page()/page_to_pfn() operations. The conversion macros will produce correct SV39/48/57 addresses for every possible/valid DRAM_BASE inside the physical memory limits. v2:Address Alex's comments

In the Linux kernel, the following vulnerability has been resolved: ice: Fix improper extts handling Extts events are disabled and enabled by the application ts2phc. However, in case where the driver is removed when the application is running, a specific extts event remains enabled and can cause a kernel crash. As a side effect, when the driver is reloaded and application is started again, remaining extts event for the channel from a previous run will keep firing and the message "extts on unexpected channel" might be printed to the user. To avoid that, extts events shall be disabled when PTP is released.

In the Linux kernel, the following vulnerability has been resolved: f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid mkdir /mnt/test/comp f2fs_io setflags compression /mnt/test/comp dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1 truncate --size 13 /mnt/test/comp/testfile In the above scenario, we can get a BUG_ON. kernel BUG at fs/f2fs/segment.c:3589! Call Trace: do_write_page+0x78/0x390 [f2fs] f2fs_outplace_write_data+0x62/0xb0 [f2fs] f2fs_do_write_data_page+0x275/0x740 [f2fs] f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs] f2fs_write_multi_pages+0x1e5/0xae0 [f2fs] f2fs_write_cache_pages+0xab1/0xc60 [f2fs] f2fs_write_data_pages+0x2d8/0x330 [f2fs] do_writepages+0xcf/0x270 __writeback_single_inode+0x44/0x350 writeback_sb_inodes+0x242/0x530 __writeback_inodes_wb+0x54/0xf0 wb_writeback+0x192/0x310 wb_workfn+0x30d/0x400 The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the page was set the gcing flag by set_cluster_dirty().

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Check pat.ops before dumping PAT settings We may leave pat.ops unset when running on brand new platform or when running as a VF. While the former is unlikely, the latter is valid (future) use case and will cause NPD when someone will try to dump PAT settings by debugfs. It's better to check pointer to pat.ops instead of specific .dump hook, as we have this hook always defined for every .ops variant.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_omap: Implementation of Errata i2310 As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts, therefore apply Errata i2310 solution. [0] https://www.ti.com/lit/pdf/sprz536 page 23

In the Linux kernel, the following vulnerability has been resolved: sched: fix warning in sched_setaffinity Commit 8f9ea86fdf99b added some logic to sched_setaffinity that included a WARN when a per-task affinity assignment races with a cpuset update. Specifically, we can have a race where a cpuset update results in the task affinity no longer being a subset of the cpuset. That's fine; we have a fallback to instead use the cpuset mask. However, we have a WARN set up that will trigger if the cpuset mask has no overlap at all with the requested task affinity. This shouldn't be a warning condition; its trivial to create this condition. Reproduced the warning by the following setup: - $PID inside a cpuset cgroup - another thread repeatedly switching the cpuset cpus from 1-2 to just 1 - another thread repeatedly setting the $PID affinity (via taskset) to 2

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fw: scan offload prohibit all 6 GHz channel if no 6 GHz sband We have some policy via BIOS to block uses of 6 GHz. In this case, 6 GHz sband will be NULL even if it is WiFi 7 chip. So, add NULL handling here to avoid crash.

In the Linux kernel, the following vulnerability has been resolved: irqchip/imx-irqsteer: Handle runtime power management correctly The power domain is automatically activated from clk_prepare(). However, on certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes sleeping functions, which triggers the 'scheduling while atomic' bug in the context switch path during device probing: BUG: scheduling while atomic: kworker/u13:1/48/0x00000002 Call trace: __schedule_bug+0x54/0x6c __schedule+0x7f0/0xa94 schedule+0x5c/0xc4 schedule_preempt_disabled+0x24/0x40 __mutex_lock.constprop.0+0x2c0/0x540 __mutex_lock_slowpath+0x14/0x20 mutex_lock+0x48/0x54 clk_prepare_lock+0x44/0xa0 clk_prepare+0x20/0x44 imx_irqsteer_resume+0x28/0xe0 pm_generic_runtime_resume+0x2c/0x44 __genpd_runtime_resume+0x30/0x80 genpd_runtime_resume+0xc8/0x2c0 __rpm_callback+0x48/0x1d8 rpm_callback+0x6c/0x78 rpm_resume+0x490/0x6b4 __pm_runtime_resume+0x50/0x94 irq_chip_pm_get+0x2c/0xa0 __irq_do_set_handler+0x178/0x24c irq_set_chained_handler_and_data+0x60/0xa4 mxc_gpio_probe+0x160/0x4b0 Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip callbacks and handle power management in them as they are invoked from non-atomic context. [ tglx: Rewrote change log, added Fixes tag ]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix adding block group to a reclaim list and the unused list during reclaim There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC.

In the Linux kernel, the following vulnerability has been resolved: riscv: kexec: Avoid deadlock in kexec crash path If the kexec crash code is called in the interrupt context, the machine_kexec_mask_interrupts() function will trigger a deadlock while trying to acquire the irqdesc spinlock and then deactivate irqchip in irq_set_irqchip_state() function. Unlike arm64, riscv only requires irq_eoi handler to complete EOI and keeping irq_set_irqchip_state() will only leave this possible deadlock without any use. So we simply remove it.

In the Linux kernel, the following vulnerability has been resolved: ext4: make sure the first directory block is not a hole The syzbot constructs a directory that has no dirblock but is non-inline, i.e. the first directory block is a hole. And no errors are reported when creating files in this directory in the following flow. ext4_mknod ... ext4_add_entry // Read block 0 ext4_read_dirblock(dir, block, DIRENT) bh = ext4_bread(NULL, inode, block, 0) if (!bh && (type == INDEX || type == DIRENT_HTREE)) // The first directory block is a hole // But type == DIRENT, so no error is reported. After that, we get a directory block without '.' and '..' but with a valid dentry. This may cause some code that relies on dot or dotdot (such as make_indexed_dir()) to crash. Therefore when ext4_read_dirblock() finds that the first directory block is a hole report that the filesystem is corrupted and return an error to avoid loading corrupted data from disk causing something bad.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Be stricter about IO mapping flags The current panthor_device_mmap_io() implementation has two issues: 1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET, panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear VM_MAYWRITE. That means userspace can use mprotect() to make the mapping writable later on. This is a classic Linux driver gotcha. I don't think this actually has any impact in practice: When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and when the GPU is not powered, the dummy_latest_flush page provided by the driver is deliberately designed to not do any flushes, so the only thing writing to the dummy_latest_flush could achieve would be to make *more* flushes happen. 2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are mappings without the VM_SHARED flag). MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has copy-on-write semantics, which for VM_PFNMAP are semi-supported but fairly cursed. In particular, in such a mapping, the driver can only install PTEs during mmap() by calling remap_pfn_range() (because remap_pfn_range() wants to **store the physical address of the mapped physical memory into the vm_pgoff of the VMA**); installing PTEs later on with a fault handler (as panthor does) is not supported in private mappings, and so if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when it hits a BUG() check. Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for the FLUSH_ID don't make sense). Reproducers for both scenarios are in the notes of my patch on the mailing list; I tested that these bugs exist on a Rock 5B machine. Note that I only compile-tested the patch, I haven't tested it; I don't have a working kernel build setup for the test machine yet. Please test it before applying it.

In the Linux kernel, the following vulnerability has been resolved: powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt. nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel crash when invoked during real mode interrupt handling (e.g. early HMI/MCE interrupt handler) if percpu allocation comes from vmalloc area. Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI() wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when percpu allocation is from the embedded first chunk. However with CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu allocation can come from the vmalloc area. With kernel command line "percpu_alloc=page" we can force percpu allocation to come from vmalloc area and can see kernel crash in machine_check_early: [ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110 [ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0 [ 1.215719] --- interrupt: 200 [ 1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable) [ 1.215722] [c000000fffd731b0] [0000000000000000] 0x0 [ 1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8 Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu first chunk is not embedded.

In the Linux kernel, the following vulnerability has been resolved: arm64: mm: Fix lockless walks with static and dynamic page-table folding Lina reports random oopsen originating from the fast GUP code when 16K pages are used with 4-level page-tables, the fourth level being folded at runtime due to lack of LPA2. In this configuration, the generic implementation of p4d_offset_lockless() will return a 'p4d_t *' corresponding to the 'pgd_t' allocated on the stack of the caller, gup_fast_pgd_range(). This is normally fine, but when the fourth level of page-table is folded at runtime, pud_offset_lockless() will offset from the address of the 'p4d_t' to calculate the address of the PUD in the same page-table page. This results in a stray stack read when the 'p4d_t' has been allocated on the stack and can send the walker into the weeds. Fix the problem by providing our own definition of p4d_offset_lockless() when CONFIG_PGTABLE_LEVELS <= 4 which returns the real page-table pointer rather than the address of the local stack variable.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: validate nvme_local_port correctly The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port.

In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix div-by-zero in vmpressure_calc_level() evict_folios() uses a second pass to reclaim folios that have gone through page writeback and become clean before it finishes the first pass, since folio_rotate_reclaimable() cannot handle those folios due to the isolation. The second pass tries to avoid potential double counting by deducting scan_control->nr_scanned. However, this can result in underflow of nr_scanned, under a condition where shrink_folio_list() does not increment nr_scanned, i.e., when folio_trylock() fails. The underflow can cause the divisor, i.e., scale=scanned+reclaimed in vmpressure_calc_level(), to become zero, resulting in the following crash: [exception RIP: vmpressure_work_fn+101] process_one_work at ffffffffa3313f2b Since scan_control->nr_scanned has no established semantics, the potential double counting has minimal risks. Therefore, fix the problem by not deducting scan_control->nr_scanned in evict_folios().

In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Check if is_avq is NULL [bug] In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved to determine whether it is admin virtqueue, but this function vp_dev->is_avq may be empty. For installations, virtio_pci_legacy does not assign a value to vp_dev->is_avq. [fix] Check whether it is vp_dev->is_avq before use. [test] Test with virsh Attach device Before this patch, the following command would crash the guest system After applying the patch, everything seems to be working fine.

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: Initialize all fields in dumped nexthops struct nexthop_grp contains two reserved fields that are not initialized by nla_put_nh_group(), and carry garbage. This can be observed e.g. with strace (edited for clarity): # ip nexthop add id 1 dev lo # ip nexthop add id 101 group 1 # strace -e recvmsg ip nexthop get id 101 ... recvmsg(... [{nla_len=12, nla_type=NHA_GROUP}, [{id=1, weight=0, resvd1=0x69, resvd2=0x67}]] ...) = 52 The fields are reserved and therefore not currently used. But as they are, they leak kernel memory, and the fact they are not just zero complicates repurposing of the fields for new ends. Initialize the full structure.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix missing lock on sync reset reload On sync reset reload work, when remote host updates devlink on reload actions performed on that host, it misses taking devlink lock before calling devlink_remote_reload_actions_performed() which results in triggering lock assert like the following: WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50 … CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core] RIP: 0010:devl_assert_locked+0x3e/0x50 … Call Trace: <TASK> ? __warn+0xa4/0x210 ? devl_assert_locked+0x3e/0x50 ? report_bug+0x160/0x280 ? handle_bug+0x3f/0x80 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? devl_assert_locked+0x3e/0x50 devlink_notify+0x88/0x2b0 ? mlx5_attach_device+0x20c/0x230 [mlx5_core] ? __pfx_devlink_notify+0x10/0x10 ? process_one_work+0x4b6/0xbb0 process_one_work+0x4b6/0xbb0 […]

In the Linux kernel, the following vulnerability has been resolved: pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER In create_pinctrl(), pinctrl_maps_mutex is acquired before calling add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl() calls pinctrl_free(). However, pinctrl_free() attempts to acquire pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to a potential deadlock. This patch resolves the issue by releasing pinctrl_maps_mutex before calling pinctrl_free(), preventing the deadlock. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mos7840: fix crash on resume Since commit c49cfa917025 ("USB: serial: use generic method if no alternative is provided in usb serial layer"), USB serial core calls the generic resume implementation when the driver has not provided one. This can trigger a crash on resume with mos7840 since support for multiple read URBs was added back in 2011. Specifically, both port read URBs are now submitted on resume for open ports, but the context pointer of the second URB is left set to the core rather than mos7840 port structure. Fix this by implementing dedicated suspend and resume functions for mos7840. Tested with Delock 87414 USB 2.0 to 4x serial adapter. [ johan: analyse crash and rewrite commit message; set busy flag on resume; drop bulk-in check; drop unnecessary usb_kill_urb() ]

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: add missing condition check for existence of mapped data nvme_map_data() is called when request has physical segments, hence the nvme_unmap_data() should have same condition to avoid dereference.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Check socket flag instead of hcon This fixes the following Smatch static checker warning: net/bluetooth/iso.c:1364 iso_sock_recvmsg() error: we previously assumed 'pi->conn->hcon' could be null (line 1359) net/bluetooth/iso.c 1347 static int iso_sock_recvmsg(struct socket *sock, struct msghdr *msg, 1348 size_t len, int flags) 1349 { 1350 struct sock *sk = sock->sk; 1351 struct iso_pinfo *pi = iso_pi(sk); 1352 1353 BT_DBG("sk %p", sk); 1354 1355 if (test_and_clear_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { 1356 lock_sock(sk); 1357 switch (sk->sk_state) { 1358 case BT_CONNECT2: 1359 if (pi->conn->hcon && ^^^^^^^^^^^^^^ If ->hcon is NULL 1360 test_bit(HCI_CONN_PA_SYNC, &pi->conn->hcon->flags)) { 1361 iso_conn_big_sync(sk); 1362 sk->sk_state = BT_LISTEN; 1363 } else { --> 1364 iso_conn_defer_accept(pi->conn->hcon); ^^^^^^^^^^^^^^ then we're toast 1365 sk->sk_state = BT_CONFIG; 1366 } 1367 release_sock(sk); 1368 return 0; 1369 case BT_CONNECTED: 1370 if (test_bit(BT_SK_PA_SYNC,

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix calc_available_free_space() for zoned mode calc_available_free_space() returns the total size of metadata (or system) block groups, which can be allocated from unallocated disk space. The logic is wrong on zoned mode in two places. First, the calculation of data_chunk_size is wrong. We always allocate one zone as one chunk, and no partial allocation of a zone. So, we should use zone_size (= data_sinfo->chunk_size) as it is. Second, the result "avail" may not be zone aligned. Since we always allocate one zone as one chunk on zoned mode, returning non-zone size aligned bytes will result in less pressure on the async metadata reclaim process. This is serious for the nearly full state with a large zone size device. Allowing over-commit too much will result in less async reclaim work and end up in ENOSPC. We can align down to the zone size to avoid that.

In the Linux kernel, the following vulnerability has been resolved: net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling Move the freeing of the dummy net_device from mtk_free_dev() to mtk_remove(). Previously, if alloc_netdev_dummy() failed in mtk_probe(), eth->dummy_dev would be NULL. The error path would then call mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev was allocated (but it was not), potentially causing a NULL pointer dereference. By moving free_netdev() to mtk_remove(), we ensure it's only called when mtk_probe() has succeeded and dummy_dev is fully allocated. This addresses a potential NULL pointer dereference detected by Smatch[1].