In the Linux kernel, the following vulnerability has been resolved: phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting removed and the backing data freed anyway, leaving the tusb1210 charger-detect code with a dangling reference, resulting in a crash the next time tusb1210_get_online() is called. Fix this by only holding the reference in tusb1210_get_online() freeing it at the end of the function. Note this still leaves a theoretical race window, but it avoids the issue when manually rmmod-ing the charger chip driver during development.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: make __free(kfree) accept error pointers Currently, if an automatically freed allocation is an error pointer that will lead to a crash. An example of this is in wm831x_gpio_dbg_show(). 171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i); 172 if (IS_ERR(label)) { 173 dev_err(wm831x->dev, "Failed to duplicate label\n"); 174 continue; 175 } The auto clean up function should check for error pointers as well, otherwise we're going to keep hitting issues like this.

In the Linux kernel, the following vulnerability has been resolved: net: core: reject skb_copy(_expand) for fraglist GSO skbs SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment.

In rds_recv_track_latency in net/rds/af_rds.c in the Linux kernel through 6.7.1, there is an off-by-one error for an RDS_MSG_RX_DGRAM_TRACE_MAX comparison, resulting in out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware If the value of max_speed_hz is 0, it may cause a division by zero error in hisi_calc_effective_speed(). The value of max_speed_hz is provided by firmware. Firmware is generally considered as a trusted domain. However, as division by zero errors can cause system failure, for defense measure, the value of max_speed is validated here. So 0 is regarded as invalid and an error code is returned.

An issue was discovered in the Linux kernel before 5.8. arch/x86/kvm/svm/svm.c allows a set_memory_region_test infinite loop for certain nested page faults, aka CID-e72436bc3a52.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Check for null pointer of pointer substream before dereferencing it Pointer substream is being dereferenced on the assignment of pointer card before substream is being null checked with the macro PCM_RUNTIME_CHECK. Although PCM_RUNTIME_CHECK calls BUG_ON, it still is useful to perform the the pointer check before card is assigned.

In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd() test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak when there is no failure. Move kfree(buf) from fail path to common path to prevent the memleak. The same reason and solution in test_gen_kretprobe_cmd(). unreferenced object 0xffff888143b14000 (size 2048): comm "insmod", pid 52490, jiffies 4301890980 (age 40.553s) hex dump (first 32 bytes): 70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp 72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys backtrace: [<000000006d7b836b>] kmalloc_trace+0x27/0xa0 [<0000000009528b5b>] 0xffffffffa059006f [<000000008408b580>] do_one_initcall+0x87/0x2a0 [<00000000c4980a7e>] do_init_module+0xdf/0x320 [<00000000d775aad0>] load_module+0x3006/0x3390 [<00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0 [<000000003726480d>] do_syscall_64+0x35/0x80 [<000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up() lpfc_worker_wake_up() calls the lpfc_work_done() routine, which takes the hbalock. Thus, lpfc_worker_wake_up() should not be called while holding the hbalock to avoid potential deadlock.

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The netvsc driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory.

In the Linux kernel, the following vulnerability has been resolved: cpu: Re-enable CPU mitigations by default for !X86 architectures Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time.

In the Linux kernel, the following vulnerability has been resolved: drm/arm/malidp: fix a possible null pointer dereference In malidp_mw_connector_reset, new memory is allocated with kzalloc, but no check is performed. In order to prevent null pointer dereferencing, ensure that mw_state is checked before calling __drm_atomic_helper_connector_reset.

In the Linux kernel, the following vulnerability has been resolved: mm: use memalloc_nofs_save() in page_cache_ra_order() See commit f2c817bed58d ("mm: use memalloc_nofs_save in readahead path"), ensure that page_cache_ra_order() do not attempt to reclaim file-backed pages too, or it leads to a deadlock, found issue when test ext4 large folio. INFO: task DataXceiver for:7494 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:DataXceiver for state:D stack:0 pid:7494 ppid:1 flags:0x00000200 Call trace: __switch_to+0x14c/0x240 __schedule+0x82c/0xdd0 schedule+0x58/0xf0 io_schedule+0x24/0xa0 __folio_lock+0x130/0x300 migrate_pages_batch+0x378/0x918 migrate_pages+0x350/0x700 compact_zone+0x63c/0xb38 compact_zone_order+0xc0/0x118 try_to_compact_pages+0xb0/0x280 __alloc_pages_direct_compact+0x98/0x248 __alloc_pages+0x510/0x1110 alloc_pages+0x9c/0x130 folio_alloc+0x20/0x78 filemap_alloc_folio+0x8c/0x1b0 page_cache_ra_order+0x174/0x308 ondemand_readahead+0x1c8/0x2b8 page_cache_async_ra+0x68/0xb8 filemap_readahead.isra.0+0x64/0xa8 filemap_get_pages+0x3fc/0x5b0 filemap_splice_read+0xf4/0x280 ext4_file_splice_read+0x2c/0x48 [ext4] vfs_splice_read.part.0+0xa8/0x118 splice_direct_to_actor+0xbc/0x288 do_splice_direct+0x9c/0x108 do_sendfile+0x328/0x468 __arm64_sys_sendfile64+0x8c/0x148 invoke_syscall+0x4c/0x118 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x4c/0x1f8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190

In the Linux kernel, the following vulnerability has been resolved: remoteproc: mediatek: Make sure IPI buffer fits in L2TCM The IPI buffer location is read from the firmware that we load to the System Companion Processor, and it's not granted that both the SRAM (L2TCM) size that is defined in the devicetree node is large enough for that, and while this is especially true for multi-core SCP, it's still useful to check on single-core variants as well. Failing to perform this check may make this driver perform R/W operations out of the L2TCM boundary, resulting (at best) in a kernel panic. To fix that, check that the IPI buffer fits, otherwise return a failure and refuse to boot the relevant SCP core (or the SCP at all, if this is single core).

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: Split 64bit accesses to fix alignment issues Some of the registers are aligned on a 32bit boundary, causing alignment faults on 64bit platforms. Unable to handle kernel paging request at virtual address ffffffc084a1d004 Mem abort info: ESR = 0x0000000096000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000046ad6000 [ffffffc084a1d004] pgd=100000013ffff003, p4d=100000013ffff003, pud=100000013ffff003, pmd=0068000020a00711 Internal error: Oops: 0000000096000061 [#1] SMP Modules linked in: mtk_t7xx(+) qcserial pppoe ppp_async option nft_fib_inet nf_flow_table_inet mt7921u(O) mt7921s(O) mt7921e(O) mt7921_common(O) iwlmvm(O) iwldvm(O) usb_wwan rndis_host qmi_wwan pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7996e(O) mt792x_usb(O) mt792x_lib(O) mt7915e(O) mt76_usb(O) mt76_sdio(O) mt76_connac_lib(O) mt76(O) mac80211(O) iwlwifi(O) huawei_cdc_ncm cfg80211(O) cdc_ncm cdc_ether wwan usbserial usbnet slhc sfp rtc_pcf8563 nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mt6577_auxadc mdio_i2c libcrc32c compat(O) cdc_wdm cdc_acm at24 crypto_safexcel pwm_fan i2c_gpio i2c_smbus industrialio i2c_algo_bit i2c_mux_reg i2c_mux_pca954x i2c_mux_pca9541 i2c_mux_gpio i2c_mux dummy oid_registry tun sha512_arm64 sha1_ce sha1_generic seqiv md5 geniv des_generic libdes cbc authencesn authenc leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd nvme nvme_core gpio_button_hotplug(O) dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax usbcore usb_common ptp aquantia pps_core mii tpm encrypted_keys trusted CPU: 3 PID: 5266 Comm: kworker/u9:1 Tainted: G O 6.6.22 #0 Hardware name: Bananapi BPI-R4 (DT) Workqueue: md_hk_wq t7xx_fsm_uninit [mtk_t7xx] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx] lr : t7xx_cldma_start+0xac/0x13c [mtk_t7xx] sp : ffffffc085d63d30 x29: ffffffc085d63d30 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: ffffff80c804f2c0 x24: ffffff80ca196c05 x23: 0000000000000000 x22: ffffff80c814b9b8 x21: ffffff80c814b128 x20: 0000000000000001 x19: ffffff80c814b080 x18: 0000000000000014 x17: 0000000055c9806b x16: 000000007c5296d0 x15: 000000000f6bca68 x14: 00000000dbdbdce4 x13: 000000001aeaf72a x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffffff80ca1ef6b4 x7 : ffffff80c814b818 x6 : 0000000000000018 x5 : 0000000000000870 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000010a947000 x1 : ffffffc084a1d004 x0 : ffffffc084a1d004 Call trace: t7xx_cldma_hw_set_start_addr+0x1c/0x3c [mtk_t7xx] t7xx_fsm_uninit+0x578/0x5ec [mtk_t7xx] process_one_work+0x154/0x2a0 worker_thread+0x2ac/0x488 kthread+0xe0/0xec ret_from_fork+0x10/0x20 Code: f9400800 91001000 8b214001 d50332bf (f9000022) ---[ end trace 0000000000000000 ]--- The inclusion of io-64-nonatomic-lo-hi.h indicates that all 64bit accesses can be replaced by pairs of nonatomic 32bit access. Fix alignment by forcing all accesses to be 32bit on 64bit platforms.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt The loop inside nfs_netfs_issue_read() currently does not disable interrupts while iterating through pages in the xarray to submit for NFS read. This is not safe though since after taking xa_lock, another page in the mapping could be processed for writeback inside an interrupt, and deadlock can occur. The fix is simple and clean if we use xa_for_each_range(), which handles the iteration with RCU while reducing code complexity. The problem is easily reproduced with the following test: mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/nfs/file1.bin of=/dev/null umount /mnt/nfs On the console with a lockdep-enabled kernel a message similar to the following will be seen: ================================ WARNING: inconsistent lock state 6.7.0-lockdbg+ #10 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at: nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x144/0x380 _raw_spin_lock_irqsave+0x4e/0xa0 __folio_end_writeback+0x17e/0x5c0 folio_end_writeback+0x93/0x1b0 iomap_finish_ioend+0xeb/0x6a0 blk_update_request+0x204/0x7f0 blk_mq_end_request+0x30/0x1c0 blk_complete_reqs+0x7e/0xa0 __do_softirq+0x113/0x544 __irq_exit_rcu+0xfe/0x120 irq_exit_rcu+0xe/0x20 sysvec_call_function_single+0x6f/0x90 asm_sysvec_call_function_single+0x1a/0x20 pv_native_safe_halt+0xf/0x20 default_idle+0x9/0x20 default_idle_call+0x67/0xa0 do_idle+0x2b5/0x300 cpu_startup_entry+0x34/0x40 start_secondary+0x19d/0x1c0 secondary_startup_64_no_verify+0x18f/0x19b irq event stamp: 176891 hardirqs last enabled at (176891): [<ffffffffa67a0be4>] _raw_spin_unlock_irqrestore+0x44/0x60 hardirqs last disabled at (176890): [<ffffffffa67a0899>] _raw_spin_lock_irqsave+0x79/0xa0 softirqs last enabled at (176646): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 softirqs last disabled at (176633): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#4); <Interrupt> lock(&xa->xa_lock#4); *** DEADLOCK *** 2 locks held by test5/1708: #0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at: nfs_start_io_read+0x28/0x90 [nfs] #1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at: page_cache_ra_unbounded+0xa4/0x280 stack backtrace: CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Call Trace: dump_stack_lvl+0x5b/0x90 mark_lock+0xb3f/0xd20 __lock_acquire+0x77b/0x3360 _raw_spin_lock+0x34/0x80 nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] netfs_begin_read+0x77f/0x980 [netfs] nfs_netfs_readahead+0x45/0x60 [nfs] nfs_readahead+0x323/0x5a0 [nfs] read_pages+0xf3/0x5c0 page_cache_ra_unbounded+0x1c8/0x280 filemap_get_pages+0x38c/0xae0 filemap_read+0x206/0x5e0 nfs_file_read+0xb7/0x140 [nfs] vfs_read+0x2a9/0x460 ksys_read+0xb7/0x140

In the Linux kernel, the following vulnerability has been resolved: media: tc358743: register v4l2 async device only after successful setup Ensure the device has been setup correctly before registering the v4l2 async device, thus allowing userspace to access.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Allow UD qp_type to join multicast only As for multicast: - The SIDR is the only mode that makes sense; - Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is UD compatible. In this case qkey also needs to be set [1]. This patch allows only UD qp_type to join multicast, and set qkey to default if it's not set, to fix an uninit-value error: the ib->rec.qkey field is accessed without being initialized. ===================================================== BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline] rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546 ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732 vfs_write+0x8ce/0x2030 fs/read_write.c:588 ksys_write+0x28c/0x520 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline] __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Local variable ib.i created at: cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline] rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ===================================================== [1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add cond_resched() for no forced preemption model For no forced preemption model kernel, in the scenario where the expander is connected to 12 high performance SAS SSDs, the following call trace may occur: [ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211] [ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 214.575224][ C240] pc : fput_many+0x8c/0xdc [ 214.579480][ C240] lr : fput+0x1c/0xf0 [ 214.583302][ C240] sp : ffff80002de2b900 [ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000 [ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000 [ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000 [ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001 [ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000 [ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000 [ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0 [ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff [ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c [ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0 [ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001 [ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080 [ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554 [ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020 [ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8 [ 214.677191][ C240] Call trace: [ 214.680320][ C240] fput_many+0x8c/0xdc [ 214.684230][ C240] fput+0x1c/0xf0 [ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc [ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140 [ 214.696917][ C240] bio_endio+0x160/0x1bc [ 214.701001][ C240] blk_update_request+0x1c8/0x3bc [ 214.705867][ C240] scsi_end_request+0x3c/0x1f0 [ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0 [ 214.715249][ C240] scsi_finish_command+0x104/0x140 [ 214.720200][ C240] scsi_softirq_done+0x90/0x180 [ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70 [ 214.730016][ C240] scsi_mq_done+0x48/0xac [ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas] [ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw] [ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw] [ 214.752179][ C240] irq_thread_fn+0x34/0xa4 [ 214.756435][ C240] irq_thread+0xc4/0x130 [ 214.760520][ C240] kthread+0x108/0x13c [ 214.764430][ C240] ret_from_fork+0x10/0x18 This is because in the hisi_sas driver, both the hardware interrupt handler and the interrupt thread are executed on the same CPU. In the performance test scenario, function irq_wait_for_interrupt() will always return 0 if lots of interrupts occurs and the CPU will be continuously consumed. As a result, the CPU cannot run the watchdog thread. When the watchdog time exceeds the specified time, call trace occurs. To fix it, add cond_resched() to execute the watchdog thread.

In the Linux kernel, the following vulnerability has been resolved: Input: iforce - invert valid length check when fetching device IDs syzbot is reporting uninitialized value at iforce_init_device() [1], for commit 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer when fetching device IDs") is checking that valid length is shorter than bytes to read. Since iforce_get_id_packet() stores valid length when returning 0, the caller needs to check that valid length is longer than or equals to bytes to read.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in ext4_writepages we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first..

In the Linux kernel, the following vulnerability has been resolved: virtio_net: correct netdev_tx_reset_queue() invocation point When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicas ---truncated---

In the Linux kernel, the following vulnerability has been resolved: soc: imx8m: Probe the SoC driver as platform driver With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe. Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later. " ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace: imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1 "

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid scanning potential huge holes When using devm_request_free_mem_region() and devm_memremap_pages() to add ZONE_DEVICE memory, if requested free mem region's end pfn were huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see move_pfn_range_to_zone()). Thus it creates a huge hole between node_start_pfn() and node_end_pfn(). We found on some AMD APUs, amdkfd requested such a free mem region and created a huge hole. In such a case, following code snippet was just doing busy test_bit() looping on the huge hole. for (pfn = start_pfn; pfn < end_pfn; pfn++) { struct page *page = pfn_to_online_page(pfn); if (!page) continue; ... } So we got a soft lockup: watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221] CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1 RIP: 0010:pfn_to_online_page+0x5/0xd0 Call Trace: ? kmemleak_scan+0x16a/0x440 kmemleak_write+0x306/0x3a0 ? common_file_perm+0x72/0x170 full_proxy_write+0x5c/0x90 vfs_write+0xb9/0x260 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae I did some tests with the patch. (1) amdgpu module unloaded before the patch: real 0m0.976s user 0m0.000s sys 0m0.968s after the patch: real 0m0.981s user 0m0.000s sys 0m0.973s (2) amdgpu module loaded before the patch: real 0m35.365s user 0m0.000s sys 0m35.354s after the patch: real 0m1.049s user 0m0.000s sys 0m1.042s

arch/powerpc/perf/core-book3s.c in the Linux kernel before 5.12.13, on systems with perf_event_paranoid=-1 and no specific PMU driver support registered, allows local users to cause a denial of service (perf_instruction_pointer NULL pointer dereference and OOPS) via a "perf record" command.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: Remove proc entry when dev is unregistered. syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 </TASK> remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456'

Guests can trigger deadlock in Linux netback driver T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] The patch for XSA-392 introduced another issue which might result in a deadlock when trying to free the SKB of a packet dropped due to the XSA-392 handling (CVE-2022-42328). Additionally when dropping packages for other reasons the same deadlock could occur in case of netpoll being active for the interface the xen-netback driver is connected to (CVE-2022-42329).

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent crash when disable stream [Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder.

In the Linux kernel, the following vulnerability has been resolved: gtp: fix a potential NULL pointer dereference When sockfd_lookup() fails, gtp_encap_enable_socket() returns a NULL pointer, but its callers only check for error pointers thus miss the NULL pointer case. Fix it by returning an error pointer with the error code carried from sockfd_lookup(). (I found this bug during code inspection.)

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Don't BUG if userspace injects an interrupt with GIF=0 Don't BUG/WARN on interrupt injection due to GIF being cleared, since it's trivial for userspace to force the situation via KVM_SET_VCPU_EVENTS (even if having at least a WARN there would be correct for KVM internally generated injections). kernel BUG at arch/x86/kvm/svm/svm.c:3386! invalid opcode: 0000 [#1] SMP CPU: 15 PID: 926 Comm: smm_test Not tainted 5.17.0-rc3+ #264 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:svm_inject_irq+0xab/0xb0 [kvm_amd] Code: <0f> 0b 0f 1f 00 0f 1f 44 00 00 80 3d ac b3 01 00 00 55 48 89 f5 53 RSP: 0018:ffffc90000b37d88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810a234ac0 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffc90000b37df7 RDI: ffff88810a234ac0 RBP: ffffc90000b37df7 R08: ffff88810a1fa410 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888109571000 R14: ffff88810a234ac0 R15: 0000000000000000 FS: 0000000001821380(0000) GS:ffff88846fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f74fc550008 CR3: 000000010a6fe000 CR4: 0000000000350ea0 Call Trace: <TASK> inject_pending_event+0x2f7/0x4c0 [kvm] kvm_arch_vcpu_ioctl_run+0x791/0x17a0 [kvm] kvm_vcpu_ioctl+0x26d/0x650 [kvm] __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK>

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev suspend Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Fix handling of zero block length packets While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX set to 65536, it has been observed that we receive short packets, which come at interval of 5-10 seconds sometimes and have block length zero but still contain 1-2 valid datagrams present. According to the NCM spec: "If wBlockLength = 0x0000, the block is terminated by a short packet. In this case, the USB transfer must still be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent, and the size is a multiple of wMaxPacketSize for the given pipe, then no ZLP shall be sent. wBlockLength= 0x0000 must be used with extreme care, because of the possibility that the host and device may get out of sync, and because of test issues. wBlockLength = 0x0000 allows the sender to reduce latency by starting to send a very large NTB, and then shortening it when the sender discovers that there’s not sufficient data to justify sending a large NTB" However, there is a potential issue with the current implementation, as it checks for the occurrence of multiple NTBs in a single giveback by verifying if the leftover bytes to be processed is zero or not. If the block length reads zero, we would process the same NTB infintely because the leftover bytes is never zero and it leads to a crash. Fix this by bailing out if block length reads zero.

In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: Fix memory leak in dvb_media_device_free() dvb_media_device_free() is leaking memory. Free `dvbdev->adapter->conn` before setting it to NULL, as documented in include/media/media-device.h: "The media_entity instance itself must be freed explicitly by the driver if required."

In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: prevent leak of left-over IRQ on unbind Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ") also removed the call to free_irq() in pci_remove(), leading to a leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove() when unbinding the driver from the device remove_proc_entry: removing non-empty directory 'irq/136', leaking at least 'firewire_ohci' Call Trace: ? remove_proc_entry+0x19c/0x1c0 ? __warn+0x81/0x130 ? remove_proc_entry+0x19c/0x1c0 ? report_bug+0x171/0x1a0 ? console_unlock+0x78/0x120 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? remove_proc_entry+0x19c/0x1c0 unregister_irq_proc+0xf4/0x120 free_desc+0x3d/0xe0 ? kfree+0x29f/0x2f0 irq_free_descs+0x47/0x70 msi_domain_free_locked.part.0+0x19d/0x1d0 msi_domain_free_irqs_all_locked+0x81/0xc0 pci_free_msi_irqs+0x12/0x40 pci_disable_msi+0x4c/0x60 pci_remove+0x9d/0xc0 [firewire_ohci 01b483699bebf9cb07a3d69df0aa2bee71db1b26] pci_device_remove+0x37/0xa0 device_release_driver_internal+0x19f/0x200 unbind_store+0xa1/0xb0 remove irq with devm_free_irq() before pci_disable_msi() also remove it in fail_msi: of pci_probe() as this would lead to an identical leak

In the Linux kernel, the following vulnerability has been resolved: dpll: fix pin dump crash for rebound module When a kernel module is unbound but the pin resources were not entirely freed (other kernel module instance of the same PCI device have had kept the reference to that pin), and kernel module is again bound, the pin properties would not be updated (the properties are only assigned when memory for the pin is allocated), prop pointer still points to the kernel module memory of the kernel module which was deallocated on the unbind. If the pin dump is invoked in this state, the result is a kernel crash. Prevent the crash by storing persistent pin properties in dpll subsystem, copy the content from the kernel module when pin is allocated, instead of using memory of the kernel module.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip wbscl_set_scaler_filter if filter is null Callers can pass null in filter (i.e. from returned from the function wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is not the case. This fixes 4 NULL_RETURNS issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Call mixed mode boot services on the firmware's stack Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made.

A NULL pointer dereference issue was discovered in the Linux kernel in io_files_update_with_index_alloc. A local user could use this flaw to potentially crash the system causing a denial of service.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: sdata can be NULL during AMPDU start ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: replace physindev with physinif in nf_bridge_info An skb can be added to a neigh->arp_queue while waiting for an arp reply. Where original skb's skb->dev can be different to neigh's neigh->dev. For instance in case of bridging dnated skb from one veth to another, the skb would be added to a neigh->arp_queue of the bridge. As skb->dev can be reset back to nf_bridge->physindev and used, and as there is no explicit mechanism that prevents this physindev from been freed under us (for instance neigh_flush_dev doesn't cleanup skbs from different device's neigh queue) we can crash on e.g. this stack: arp_process neigh_update skb = __skb_dequeue(&neigh->arp_queue) neigh_resolve_output(..., skb) ... br_nf_dev_xmit br_nf_pre_routing_finish_bridge_slow skb->dev = nf_bridge->physindev br_handle_frame_finish Let's use plain ifindex instead of net_device link. To peek into the original net_device we will use dev_get_by_index_rcu(). Thus either we get device and are safe to use it or we don't get it and drop skb.

In the Linux kernel before 4.16.4, a double-locking error in drivers/usb/dwc3/gadget.c may potentially cause a deadlock with f_hid.

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix shrinker NULL crash with cgroup_disable=memory Christian reports a NULL deref in zswap that he bisected down to the zswap shrinker. The issue also cropped up in the bug trackers of libguestfs [1] and the Red Hat bugzilla [2]. The problem is that when memcg is disabled with the boot time flag, the zswap shrinker might get called with sc->memcg == NULL. This is okay in many places, like the lruvec operations. But it crashes in memcg_page_state() - which is only used due to the non-node accounting of cgroup's the zswap memory to begin with. Nhat spotted that the memcg can be NULL in the memcg-disabled case, and I was then able to reproduce the crash locally as well. [1] https://github.com/libguestfs/libguestfs/issues/139 [2] https://bugzilla.redhat.com/show_bug.cgi?id=2275252

In the Linux kernel, the following vulnerability has been resolved: soc: fsl: qbman: Use raw spinlock for cgr_lock smp_call_function always runs its callback in hard IRQ context, even on PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock for cgr_lock to ensure we aren't waiting on a sleeping task. Although this bug has existed for a while, it was not apparent until commit ef2a8d5478b9 ("net: dpaa: Adjust queue depth on rate change") which invokes smp_call_function_single via qman_update_cgr_safe every time a link goes up or down.

In the Linux kernel, the following vulnerability has been resolved: tracing: Have trace_event_file have ref counters The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor.

In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks.

NULL Pointer Dereference vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (net, bluetooth modules) allows Overflow Buffers. This vulnerability is associated with program files /net/bluetooth/rfcomm/core.C. This issue affects Linux kernel: v2.6.12-rc2.

In the Linux kernel, the following vulnerability has been resolved: efi: fix panic in kdump kernel Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag Otherwise after the GTT bo is released, the GTT and gart space is freed but amdgpu_ttm_backend_unbind will not clear the gart page table entry and leave valid mapping entry pointing to the stale system page. Then if GPU access the gart address mistakely, it will read undefined value instead page fault, harder to debug and reproduce the real issue.

In the Linux kernel, the following vulnerability has been resolved: i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in lpi2c_imx_master_enable. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.