In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues.

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [jkosina@suse.cz: rebase]

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <hca@linux.ibm.com>

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized.

In the Linux kernel, the following vulnerability has been resolved: dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test.

In the Linux kernel, the following vulnerability has been resolved: ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release().

In the Linux kernel, the following vulnerability has been resolved: samples/landlock: Fix path_list memory leak Clang static analysis reports this error sandboxer.c:134:8: warning: Potential leak of memory pointed to by 'path_list' ret = 0; ^ path_list is allocated in parse_path() but never freed.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix svm_migrate_fini warning Device manager releases device-specific resources when a driver disconnects from a device, devm_memunmap_pages and devm_release_mem_region calls in svm_migrate_fini are redundant. It causes below warning trace after patch "drm/amdgpu: Split amdgpu_device_fini into early and late", so remove function svm_migrate_fini. BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718 WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795 devm_release_action+0x51/0x60 Call Trace: ? memunmap_pages+0x360/0x360 svm_migrate_fini+0x2d/0x60 [amdgpu] kgd2kfd_device_exit+0x23/0xa0 [amdgpu] amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu] amdgpu_device_fini_sw+0x45/0x290 [amdgpu] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] drm_dev_release+0x20/0x40 [drm] release_nodes+0x196/0x1e0 device_release_driver_internal+0x104/0x1d0 driver_detach+0x47/0x90 bus_remove_driver+0x7a/0xd0 pci_unregister_driver+0x3d/0x90 amdgpu_exit+0x11/0x20 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ.

In the Linux kernel, the following vulnerability has been resolved: btrfs: free exchange changeset on failures Fstests runs on my VMs have show several kmemleak reports like the following. unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90 In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed. So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory. The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix re-dirty process of tree-log nodes There is a report of a transaction abort of -EAGAIN with the following script. #!/bin/sh for d in sda sdb; do mkfs.btrfs -d single -m single -f /dev/\${d} done mount /dev/sda /mnt/test mount /dev/sdb /mnt/scratch for dir in test scratch; do echo 3 >/proc/sys/vm/drop_caches fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \ --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \ --group_reporting |& tee /dev/shm/fio.\${dir} echo 3 >/proc/sys/vm/drop_caches done for d in sda sdb; do umount /dev/\${d} done The stack trace is shown in below. [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction) [3310.968060] BTRFS info (device sda): forced readonly [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction. [3310.968065] ------------[ cut here ]------------ [3310.968066] BTRFS: Transaction aborted (error -11) [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1 [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021 [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282 [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027 [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00 [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48 [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00 [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58 [3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000 [3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0 [3310.968160] PKRU: 55555554 [3310.968161] Call Trace: [3310.968167] ? dput+0xd4/0x300 [3310.968174] btrfs_sync_file+0x3f1/0x490 [3310.968180] __x64_sys_fsync+0x33/0x60 [3310.968185] do_syscall_64+0x3b/0x90 [3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae [3310.968194] RIP: 0033:0x7efe6557329b [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006 [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010 [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980 [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000 [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]--- [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown The abort occurs because of a write hole while writing out freeing tree nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree node to ensure btrfs can write the region and does not leave a hole on write on a zoned device. The current code fails to re-dirty a node when the tree-log tree's depth is greater or equal to 2. That leads to a transaction abort with -EAGAIN. Fix the issue by properly re-dirtying a node on walking up the tree.

In the Linux kernel, the following vulnerability has been resolved: ARM: davinci: da850-evm: Avoid NULL pointer dereference With newer versions of GCC, there is a panic in da850_evm_config_emac() when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine: Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = (ptrval) [00000020] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1 Hardware name: Generic DT based system PC is at da850_evm_config_emac+0x1c/0x120 LR is at do_one_initcall+0x50/0x1e0 The emac_pdata pointer in soc_info is NULL because davinci_soc_info only gets populated on davinci machines but da850_evm_config_emac() is called on all machines via device_initcall(). Move the rmii_en assignment below the machine check so that it is only dereferenced when running on a supported SoC.

In the Linux kernel, the following vulnerability has been resolved: riscv: Flush current cpu icache before other cpus On SiFive Unmatched, I recently fell onto the following BUG when booting: [ 0.000000] ftrace: allocating 36610 entries in 144 pages [ 0.000000] Oops - illegal instruction [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5 [ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT) [ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a [ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10 [ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000 [ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60 [ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10 [ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43 [ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001 [ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000 [ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008 [ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002 [ 0.000000] [<ffffffff80007240>] riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] [<ffffffff80009474>] sbi_remote_fence_i+0x1e/0x26 [ 0.000000] [<ffffffff8000b8f4>] flush_icache_all+0x12/0x1a [ 0.000000] [<ffffffff8000666c>] patch_text_nosync+0x26/0x32 [ 0.000000] [<ffffffff8000884e>] ftrace_init_nop+0x52/0x8c [ 0.000000] [<ffffffff800f051e>] ftrace_process_locs.isra.0+0x29c/0x360 [ 0.000000] [<ffffffff80a0e3c6>] ftrace_init+0x80/0x130 [ 0.000000] [<ffffffff80a00f8c>] start_kernel+0x5c4/0x8f6 [ 0.000000] ---[ end trace f67eb9af4d8d492b ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- While ftrace is looping over a list of addresses to patch, it always failed when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the backtrace, the illegal instruction is encountered in this same function. However, patch_text_nosync, after patching the instructions, calls flush_icache_range. But looking at what happens in this function: flush_icache_range -> flush_icache_all -> sbi_remote_fence_i -> __sbi_rfence_v02 -> riscv_cpuid_to_hartid_mask The icache and dcache of the current cpu are never synchronized between the patching of riscv_cpuid_to_hartid_mask and calling this same function. So fix this by flushing the current cpu's icache before asking for the other cpus to do the same.

In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure task_work gets run as part of cancelations If we successfully cancel a work item but that work item needs to be processed through task_work, then we can be sleeping uninterruptibly in io_uring_cancel_generic() and never process it. Hence we don't make forward progress and we end up with an uninterruptible sleep warning. While in there, correct a comment that should be IFF, not IIF.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment]

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: avoid putting an uninitialized iova_domain The system will crash if we put an uninitialized iova_domain, this could happen when an error occurs before initializing the iova_domain in vdpasim_create(). BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0 ... Call Trace: <TASK> put_iova_domain+0x29/0x220 vdpasim_free+0xd1/0x120 [vdpa_sim] vdpa_release_dev+0x21/0x40 [vdpa] device_release+0x33/0x90 kobject_release+0x63/0x160 vdpasim_create+0x127/0x2a0 [vdpa_sim] vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net] vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa] genl_family_rcv_msg_doit+0x112/0x140 genl_rcv_msg+0xdf/0x1d0 ... So we must make sure the iova_domain is already initialized before put it. In addition, we may get the following warning in this case: WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70 So we must make sure the iova_cache_put() is invoked only if the iova_cache_get() is already invoked. Let's fix it together.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fail cancellation for EXITING tasks WARNING: CPU: 1 PID: 20 at fs/io_uring.c:6269 io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 CPU: 1 PID: 20 Comm: kworker/1:0 Not tainted 5.16.0-rc1-syzkaller #0 Workqueue: events io_fallback_req_func RIP: 0010:io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 Call Trace: <TASK> io_req_task_link_timeout+0x6b/0x1e0 fs/io_uring.c:6886 io_fallback_req_func+0xf9/0x1ae fs/io_uring.c:1334 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> We need original task's context to do cancellations, so if it's dying and the callback is executed in a fallback mode, fail the cancellation attempt.

In the Linux kernel, the following vulnerability has been resolved: serial: core: fix transmit-buffer reset and memleak Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has been opened would leak on driver unbind. Note that the port lock is held when clearing the buffer pointer due to the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()"). Also note that the tty-port shutdown() callback is not called for console ports so it is not strictly necessary to free the buffer page after releasing the lock (cf. d72402145ace ("tty/serial: do not free trasnmit buffer page under port lock")).

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix minor-number leak on probe errors Make sure to release the allocated minor number before returning on probe errors.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a potential gpu_metrics_table memory leak Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it!

In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix an IS_ERR() vs NULL bug The __get_free_pages() function does not return error pointers it returns NULL so fix this condition to avoid a NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: HID: bigbenff: prevent null pointer dereference When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null.

In the Linux kernel, the following vulnerability has been resolved: mptcp: remove tcp ulp setsockopt support TCP_ULP setsockopt cannot be used for mptcp because its already used internally to plumb subflow (tcp) sockets to the mptcp layer. syzbot managed to trigger a crash for mptcp connections that are in fallback mode: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0 RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline] [..] __tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline] tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160 do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391 mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638 Remove support for TCP_ULP setsockopt.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix command ring pointer corruption while aborting a command The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located.

In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path.

In the Linux kernel, the following vulnerability has been resolved: mac80211: validate extended element ID is present Before attempting to parse an extended element, verify that the extended element ID is present.

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Fix memory leaks in error handling path Should an error occur (invalid TLV len or memory allocation failure), the memory already allocated in 'reduce_power_data' should be freed before returning, otherwise it is leaking.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle() Need to call rxrpc_put_peer() for bundle candidate before kfree() as it holds a ref to rxrpc_peer. [DH: v2: Changed to abstract out the bundle freeing code into a function]

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: Fix a deadlock in the error handler The following deadlock has been observed on a test setup: - All tags allocated - The SCSI error handler calls ufshcd_eh_host_reset_handler() - ufshcd_eh_host_reset_handler() queues work that calls ufshcd_err_handler() - ufshcd_err_handler() locks up as follows: Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt Call trace: __switch_to+0x298/0x5d8 __schedule+0x6cc/0xa94 schedule+0x12c/0x298 blk_mq_get_tag+0x210/0x480 __blk_mq_alloc_request+0x1c8/0x284 blk_get_request+0x74/0x134 ufshcd_exec_dev_cmd+0x68/0x640 ufshcd_verify_dev_init+0x68/0x35c ufshcd_probe_hba+0x12c/0x1cb8 ufshcd_host_reset_and_restore+0x88/0x254 ufshcd_reset_and_restore+0xd0/0x354 ufshcd_err_handler+0x408/0xc58 process_one_work+0x24c/0x66c worker_thread+0x3e8/0xa4c kthread+0x150/0x1b4 ret_from_fork+0x10/0x30 Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved request.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-compress: prevent the potentially use of null pointer There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'.

In the Linux kernel, the following vulnerability has been resolved: mac80211-hwsim: fix late beacon hrtimer handling Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time.

In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed.

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_in_send_sdd_req() 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/debugfs: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip netdev events generated on netns removal syzbot reported following (harmless) WARN: WARNING: CPU: 1 PID: 2648 at net/netfilter/core.c:468 nft_netdev_unregister_hooks net/netfilter/nf_tables_api.c:230 [inline] nf_tables_unregister_hook include/net/netfilter/nf_tables.h:1090 [inline] __nft_release_basechain+0x138/0x640 net/netfilter/nf_tables_api.c:9524 nft_netdev_event net/netfilter/nft_chain_filter.c:351 [inline] nf_tables_netdev_event+0x521/0x8a0 net/netfilter/nft_chain_filter.c:382 reproducer: unshare -n bash -c 'ip link add br0 type bridge; nft add table netdev t ; \ nft add chain netdev t ingress \{ type filter hook ingress device "br0" \ priority 0\; policy drop\; \}' Problem is that when netns device exit hooks create the UNREGISTER event, the .pre_exit hook for nf_tables core has already removed the base hook. Notifier attempts to do this again. The need to do base hook unregister unconditionally was needed in the past, because notifier was last stage where reg->dev dereference was safe. Now that nf_tables does the hook removal in .pre_exit, this isn't needed anymore.

In the Linux kernel, the following vulnerability has been resolved: can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible() Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer.

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: mvm: Fix possible NULL dereference In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: do not decrement idle task preempt count in CPU offline With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gart.bo pin_count leak gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.

In the Linux kernel, the following vulnerability has been resolved: mptcp: clear 'kern' flag from fallback sockets The mptcp ULP extension relies on sk->sk_sock_kern being set correctly: It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from working for plain tcp sockets (any userspace-exposed socket). But in case of fallback, accept() can return a plain tcp sk. In such case, sk is still tagged as 'kernel' and setsockopt will work. This will crash the kernel, The subflow extension has a NULL ctx->conn mptcp socket: BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0 Call Trace: tcp_data_ready+0xf8/0x370 [..]

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com On the case tmp_dcim=1, the index of buffer is miscalculated. This generate a NULL pointer dereference later. So let's fix the calcul and add a check to prevent this to reappear.

In the Linux kernel, the following vulnerability has been resolved: nfp: Fix memory leak in nfp_cpp_area_cache_add() In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 }

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work