Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability has been found in y_project RuoYi up to 4.8.0 and classified as critical. This vulnerability affects the function getBeanName of the component Whitelist. The manipulation leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper Input Validation of plugin files in Administrator Interface of Secomea GateManager allows a server administrator to inject code into the GateManager interface. This issue affects: Secomea GateManager versions prior to 10.0.

An attacker who has the privilege to configure Zabbix items can use function icmpping() with additional malicious command inside it to execute arbitrary code on the current Zabbix server.

Authenticated Remote Code Execution in Altalink, Versalink & WorkCentre Products.

A memory corruption vulnerability exists when ezPDF improperly handles the parameter. This vulnerability exists due to insufficient validation of the parameter.

An improper input sanitization vulnerability in the Motorola MR2600 router could allow a local user with elevated permissions to execute arbitrary code.

A vulnerability in the radius authentication system of Brocade Fabric OS before Brocade Fabric OS 9.0 could allow a remote attacker to execute arbitrary code on the Brocade switch.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2). Affected devices do not properly validate input in configuration fields of the iperf functionality. This could allow an unauthenticated remote attacker to execute arbitrary code on the device.

A security issue was discovered in Kubernetes where a user that can create pods and persistent volumes on Windows nodes may be able to escalate to admin privileges on those nodes. Kubernetes clusters are only affected if they are using an in-tree storage plugin for Windows nodes.

A CWE-20: Improper Input Validation vulnerability exists that could allow an authenticated attacker to gain the same privilege as the application on the server when a malicious payload is provided over HTTP for the server to execute.

SAP NetWeaver Application Server Java (User Management Engine), versions- 7.10, 7.11, 7.20, 7.30, 7.31, 7.40, 7.50; does not sufficiently validate the LDAP data source configuration XML document accepted from an untrusted source, leading to Missing XML Validation.

SAP Adaptive Server Enterprise (Backup Server), version 16.0, does not perform the necessary validation checks for an authenticated user while executing DUMP or LOAD command allowing arbitrary code execution or Code Injection.

SAP Landscape Management, version 3.0, allows an attacker with admin privileges to execute malicious commands with root privileges in SAP Host Agent via SAP Landscape Management.

Chamilo LMS v1.11.13 lacks validation on the user modification form, allowing attackers to escalate privileges to Platform Admin.

Improper input validation vulnerability in parser_infe and sheifd_find_itemIndexin fuctions of libsimba library prior to SMR Apr-2022 Release 1 allows out of bounds write by privileged attackers.

Improper input validation vulnerability in parser_iloc and sheifd_find_itemIndexin fuctions of libsimba library prior to SMR Apr-2022 Release 1 allows out of bounds write by privileged attacker.

Electron is a framework for writing cross-platform desktop applications using JavaScript (JS), HTML, and CSS. A vulnerability in versions prior to 18.0.0-beta.6, 17.2.0, 16.2.6, and 15.5.5 allows attackers who have control over a given apps update server / update storage to serve maliciously crafted update packages that pass the code signing validation check but contain malicious code in some components. This kind of attack would require significant privileges in a potential victim's own auto updating infrastructure and the ease of that attack entirely depends on the potential victim's infrastructure security. Electron versions 18.0.0-beta.6, 17.2.0, 16.2.6, and 15.5.5 contain a fix for this issue. There are no known workarounds.

On 16.1.x versions prior to 16.1.2.2 and 15.1.x versions prior to 15.1.5.1, BIG-IP APM does not properly validate configurations, allowing an authenticated attacker with high privileges to manipulate the APM policy leading to privilege escalation/remote code execution. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

GeoServer is an open source software server written in Java that allows users to share and edit geospatial data. An arbitrary file upload vulnerability exists in versions prior to 2.23.4 and 2.24.1 that enables an authenticated administrator with permissions to modify coverage stores through the REST Coverage Store API to upload arbitrary file contents to arbitrary file locations which can lead to remote code execution. Coverage stores that are configured using relative paths use a GeoServer Resource implementation that has validation to prevent path traversal but coverage stores that are configured using absolute paths use a different Resource implementation that does not prevent path traversal. This vulnerability can lead to executing arbitrary code. An administrator with limited privileges could also potentially exploit this to overwrite GeoServer security files and obtain full administrator privileges. Versions 2.23.4 and 2.24.1 contain a fix for this issue.

GeoTools is an open source Java library that provides tools for geospatial data. The GeoTools library has a number of data sources that can perform unchecked JNDI lookups, which in turn can be used to perform class deserialization and result in arbitrary code execution. Similar to the Log4J case, the vulnerability can be triggered if the JNDI names are user-provided, but requires admin-level login to be triggered. The lookups are now restricted in GeoTools 26.4, GeoTools 25.6, and GeoTools 24.6. Users unable to upgrade should ensure that any downstream application should not allow usage of remotely provided JNDI strings.

A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.

Adobe Commerce versions 2.4.3-p1 (and earlier) and 2.3.7-p2 (and earlier) are affected by an improper input validation vulnerability. Exploitation of this issue does not require user interaction and could result in a post-authentication arbitrary code execution.

A vulnerability in Cisco Firepower Device Manager (FDM) On-Box software could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation. An attacker could exploit this vulnerability by uploading a malicious file to an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on as well as modify the underlying operating system of an affected device.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code with root privileges on the underlying Linux shell. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by first creating a malicious file on the affected device itself and then uploading a second malicious file to the device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or bypass licensing requirements on the device.

The 1E-Exchange-URLResponseTime instruction that is part of the Network product pack available on the 1E Exchange does not properly validate the URL parameter, which allows for a specially crafted input to perform arbitrary code execution with SYSTEM permissions. This instruction only runs on Windows clients. To remediate this issue download the updated Network product pack from the 1E Exchange and update the 1E-Exchange-URLResponseTime instruction to v20.1 by uploading it through the 1E Platform instruction upload UI

On F5 BIG-IP AFM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, and 13.1.x versions prior to 13.1.5, an authenticated attacker with high privileges can upload a maliciously crafted file to the BIG-IP AFM Configuration utility, which allows an attacker to run arbitrary commands. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.

A flaw was found in the HDLC_PPP module of the Linux kernel in versions before 5.9-rc7. Memory corruption and a read overflow is caused by improper input validation in the ppp_cp_parse_cr function which can cause the system to crash or cause a denial of service. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

Mitel MiCloud Management Portal before 6.1 SP5 could allow a remote attacker to conduct a SQL Injection attack and access user credentials due to improper input validation.

GeoServer is an open source software server written in Java that allows users to share and edit geospatial data. The GeoServer security mechanism can perform an unchecked JNDI lookup, which in turn can be used to perform class deserialization and result in arbitrary code execution. The same can happen while configuring data stores with data sources located in JNDI, or while setting up the disk quota mechanism. In order to perform any of the above changes, the attack needs to have obtained admin rights and use either the GeoServer GUI, or its REST API. The lookups are going to be restricted in GeoServer 2.21.0, 2.20.4, 1.19.6. Users unable to upgrade should restrict access to the `geoserver/web` and `geoserver/rest` via a firewall and ensure that the GeoWebCache is not remotely accessible.

The SAS portal of Mitel MiCollab before 9.2 could allow an attacker to access user credentials due to improper input validation, aka SQL Injection.

Improper Input Validation vulnerability in Saturday Drive Ninja Forms Contact Form.This issue affects Ninja Forms Contact Form : from n/a through 3.6.24.

GeoWebCache is a tile caching server implemented in Java. The GeoWebCache disk quota mechanism can perform an unchecked JNDI lookup, which in turn can be used to perform class deserialization and result in arbitrary code execution. While in GeoWebCache the JNDI strings are provided via local configuration file, in GeoServer a user interface is provided to perform the same, that can be accessed remotely, and requires admin-level login to be used. These lookup are unrestricted in scope and can lead to code execution. The lookups are going to be restricted in GeoWebCache 1.21.0, 1.20.2, 1.19.3.

An OS command injection and memory corruption vulnerability in the PAN-OS management web interface that allows authenticated administrators to disrupt system processes and potentially execute arbitrary code and OS commands with root privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.16; PAN-OS 9.0 versions earlier than PAN-OS 9.0.10; PAN-OS 9.1 versions earlier than PAN-OS 9.1.4; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

An attacker who has gained access to an admin account can perform RCE via null-byte injection Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.0.0 before 7.1.0

In Carlo Gavazzi UWP3.0 in multiple versions and CPY Car Park Server in Version 2.8.3 an remote attacker with admin rights could execute arbitrary commands due to missing input sanitization in the backup restore function

Grav is a flat-file content management system. Prior to version 1.7.42, the patch for CVE-2022-2073, a server-side template injection vulnerability in Grav leveraging the default `filter()` function, did not block other built-in functions exposed by Twig's Core Extension that could be used to invoke arbitrary unsafe functions, thereby allowing for remote code execution. A patch in version 1.74.2 overrides the built-in Twig `map()` and `reduce()` filter functions in `system/src/Grav/Common/Twig/Extension/GravExtension.php` to validate the argument passed to the filter in `$arrow`.

Improper Input Validation vulnerability in custom report logo upload in Nozomi Networks Guardian, and CMC allows an authenticated attacker with admin or report manager roles to execute unattended commands on the appliance using web server user privileges. This issue affects: Nozomi Networks Guardian versions prior to 22.0.0. Nozomi Networks CMC versions prior to 22.0.0.

Improper Input Validation vulnerability in project file upload in Nozomi Networks Guardian and CMC allows an authenticated attacker with admin or import manager roles to execute unattended commands on the appliance using web server user privileges. This issue affects: Nozomi Networks Guardian versions prior to 22.0.0. Nozomi Networks CMC versions prior to 22.0.0.

Pexip Infinity before 20.1 allows privilege escalation by restoring a system backup.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an authenticated, remote attacker to execute arbitrary commands on the underlying Linux shell as the root user. Exploitation of this vulnerability requires privileged access to an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrator privileges and then sending a malicious request to a certain part of the interface.

Mermaid is a Javascript based diagramming and charting tool that uses Markdown-inspired text definitions and a renderer to create and modify complex diagrams. Prior to version 8.13.8, malicious diagrams can run javascript code at diagram readers' machines. Users should upgrade to version 8.13.8 to receive a patch. There are no known workarounds aside from upgrading.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

A vulnerability in the web-based management interface of Cisco Webex Video Mesh could allow an authenticated, remote attacker to execute arbitrary commands on the affected system. The vulnerability is due to improper validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrative privileges and supplying crafted requests to the application. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges on a targeted node.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system. When processed, the commands will be executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by providing malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as the root user.

An issue was discovered in Backdrop CMS 1.13.x before 1.13.5 and 1.14.x before 1.14.2. It allows the upload of entire-site configuration archives through the user interface or command line. It does not sufficiently check uploaded archives for invalid data, allowing non-configuration scripts to potentially be uploaded to the server. This issue is mitigated by the fact that the attacker would be required to have the "Synchronize, import, and export configuration" permission, a permission that only trusted administrators should be given. Other measures in the product prevent the execution of PHP scripts, so another server-side scripting language must be accessible on the server to execute code.

Magento versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper input validation vulnerability within the CMS page scheduled update feature. An authenticated attacker with administrative privilege could leverage this vulnerability to achieve remote code execution on the system.

schema_element defeats protective search_path changes; It was found that certain database calls in PostgreSQL could permit an authed attacker with elevated database-level privileges to execute arbitrary code.