Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.14, EX6100v2 before 1.0.1.98, EX6150v2 before 1.0.1.98, EX6250 before 1.0.0.132, EX6400 before 1.0.2.158, EX6400v2 before 1.0.0.132, EX6410 before 1.0.0.132, EX6420 before 1.0.0.132, EX7300 before 1.0.2.158, EX7300v2 before 1.0.0.132, EX7320 before 1.0.0.132, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, R7800 before 1.0.2.78, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V before 2.6.2.4, RBS50Y before 2.6.1.40, RBW30 before 2.6.2.2, and XR500 before 2.3.2.114.

Advantech iView, versions 5.6 and prior, has an improper neutralization of special elements used in a command (“command injection”) vulnerability. Successful exploitation of this vulnerability may allow an attacker to send a HTTP GET or POST request that creates a command string without any validation. The attacker may then remotely execute code.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6900P before 1.3.2.132, R7000P before 1.3.2.132, R7100LG before 1.0.0.64, WNDR3400v3 before 1.0.1.38, and XR300 before 1.0.3.56.

An issue was discovered in D-Link DIR816_A1_FW101CNB04 750m11ac wireless router, The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

A command-injection vulnerability in the Image Upload function of the NASCENT RemKon Device Manager 4.0.0.0 allows attackers to execute arbitrary commands, as root, via shell metacharacters in the filename parameter to assets/index.php.

An issue was discovered in the lettre crate before 0.9.6 for Rust. In an e-mail message body, an attacker can place a . character after two <CR><LF> sequences and then inject arbitrary SMTP commands.

SystemK NVR 504/508/516 versions 2.3.5SK.30084998 and prior are vulnerable to a command injection vulnerability in the dynamic domain name system (DDNS) settings that could allow an attacker to execute arbitrary commands with root privileges.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the sysScheduleRebootSet function.

An issue was discovered in Digi TransPort DR64, SR44 VC74, and WR. The ZING protocol allows arbitrary remote command execution with SUPER privileges. This allows an attacker (with knowledge of the protocol) to execute arbitrary code on the controller including overwriting firmware, adding/removing users, disabling the internal firewall, etc.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_415AA4 function.

Tenda AX1803 v1.0.0.1 was discovered to contain a command injection vulnerability via the function fromAdvSetLanIp.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_41284C function.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_415C80 function.

The saveObject function in moadmin.php in phpMoAdmin 1.1.2 allows remote attackers to execute arbitrary commands via shell metacharacters in the object parameter.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point.

The remove_bad_chars function in utils/cups-browsed.c in cups-filters before 1.0.66 allows remote IPP printers to execute arbitrary commands via consecutive shell metacharacters in the (1) model or (2) PDL. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-2707.

xml_security.rb in the ruby-saml gem before 1.0.0 for Ruby allows XPath injection and code execution because prepared statements are not used.

TOTOLINK X5000R_V9.1.0cu.2089_B20211224 and X5000R_V9.1.0cu.2350_B20230313 were discovered to contain a remote code execution (RCE) vulnerability via the lang parameter in the setLanguageCfg function.

Accellion File Transfer Appliance before FTA_9_11_210 allows remote attackers to execute arbitrary code via shell metacharacters in the oauth_token parameter.

In vowifi service, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed.

An issue discovered in sub_4117F8 function in TOTOLINK X6000R V9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the 'lang' parameter.

TOTOlink A3700R v9.1.2u.5822_B20200513 was discovered to contain a remote command execution (RCE) vulnerability via the NTPSyncWithHost function.

TOTOlink EX1800T V9.1.0cu.2112_B20220316 is vulnerable to an unauthorized arbitrary command execution in the ‘admuser’ parameter of the setPasswordCfg interface of the cstecgi .cgi.

TOTOLINK EX1800T V9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanSecDns parameter’ of the setLanConfig interface of the cstecgi .cgi

MajorDoMo (aka Major Domestic Module) before 0662e5e allows command execution via thumb.php shell metacharacters. NOTE: this is unrelated to the Majordomo mailing-list manager.

tj-actions/changed-files is a Github action to retrieve all files and directories. Prior to 41.0.0, the `tj-actions/changed-files` workflow allows for command injection in changed filenames, allowing an attacker to execute arbitrary code and potentially leak secrets. This issue may lead to arbitrary command execution in the GitHub Runner. This vulnerability has been addressed in version 41.0.0. Users are advised to upgrade.

Command Injection vulnerability in Mathtex v.1.05 and before allows a remote attacker to execute arbitrary code via crafted string in application URL.

MotionPro in Array ArrayOS AG before 9.4.0.505 on AG and vxAG allows remote command execution via crafted packets. AG and vxAG 9.3.0.259.x are unaffected.

Tenda AX3 v16.03.12.11 was discovered to contain a remote code execution (RCE) vulnerability via the list parameter at /goform/SetNetControlList.

TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the setRebootScheCfg interface of the cstecgi .cgi.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the pingSet function.

LibreNMS v22.3.0 was discovered to contain multiple command injection vulnerabilities via the service_ip, hostname, and service_param parameters.

Tenda AX9 V22.03.01.46 has been discovered to contain a command injection vulnerability in the 'mac' parameter at /goform/SetOnlineDevName.

Tenda AX12 V22.03.01.46 has been discovered to contain a command injection vulnerability in the 'list' parameter at /goform/SetNetControlList.

Tenda AX9 V22.03.01.46 has been discovered to contain a command injection vulnerability in the 'list' parameter at /goform/SetNetControlList.

D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at hedwig.cgi.

An issue was discovered on TRENDnet TV-IP1314PI 5.5.3 200714 devices. Command injection can occur because the system function is used by davinci to unpack language packs without strict filtering of URL strings.

Tenda AX9 V22.03.01.46 is vulnerable to command injection.

In Indo-Sol PROFINET-INspektor NT through 2.4.0, a command injection vulnerability in the gedtupdater service of the firmware allows remote attackers to execute arbitrary system commands with root privileges via a crafted filename parameter in POST requests to the /api/updater/ctrl/start_update endpoint.

An issue in Tneda AX1803 v.1.0.0.1 allows a remote attacker to execute arbitrary code via the adslPwd parameter in the form_fast_setting_internet_set function.

Tenda AX12 V22.03.01.46 has been discovered to contain a command injection vulnerability in the 'mac' parameter at /goform/SetOnlineDevName.

In Emerson Rosemount GC370XA, GC700XA, and GC1500XA products, an authenticated user with network access could run arbitrary commands from a remote computer.