A vulnerability was found in harry0703 MoneyPrinterTurbo up to 1.2.6 and classified as critical. Affected by this issue is the function verify_token of the file app/controllers/base.py of the component API Endpoint. The manipulation leads to missing authentication. The attack may be launched remotely.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. Affected is the function reboot/restore of the file /cgi-bin/lighttpd.cgi of the component Web Interface. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Crypto-NAK packets in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to bypass authentication.

It was discovered that the bpserverd proprietary protocol in Unitrends Backup (UB) before 10.0.0, as invoked through xinetd, has an issue in which its authentication can be bypassed. A remote attacker could use this issue to execute arbitrary commands with root privilege on the target system.

The ProfilePress Pro plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 4.11.1. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token.

An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters.

Dell EMC CloudLink 7.1.2 and all prior versions contain an Authentication Bypass Vulnerability. A remote attacker, with the knowledge of the active directory usernames, could potentially exploit this vulnerability to gain unauthorized access to the system.

The Symantec Advanced Secure Gateway (ASG) and ProxySG web management consoles are susceptible to an authentication bypass vulnerability. An unauthenticated attacker can execute arbitrary CLI commands, view/modify the appliance configuration and policy, and shutdown/restart the appliance.

An Authentication Bypass vulnerability exists in Flowise version 1.8.2. This could allow a remote, unauthenticated attacker to access API endpoints as an administrator and allow them to access restricted functionality.

Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 allows remote attackers to obtain administrative access by entering an unspecified password during a (1) SSH or (2) TELNET session.

An authentication bypass vulnerability has been identified in Foreman when deployed with External Authentication, due to the puppet-foreman configuration. This issue arises from Apache's mod_proxy not properly unsetting headers because of restrictions on underscores in HTTP headers, allowing authentication through a malformed header. This flaw impacts all active Satellite deployments (6.13, 6.14 and 6.15) and could potentially enable unauthorized users to gain administrative access.

Improper Authentication vulnerability in Progress MOVEit Transfer (SFTP module) can lead to Privilege Escalation.This issue affects MOVEit Transfer: from 2023.0.0 before 2023.0.12, from 2023.1.0 before 2023.1.7, from 2024.0.0 before 2024.0.3.

Improper authentication in the vault password feature in Devolutions Remote Desktop Manager 2024.1.31.0 and earlier allows an attacker that has compromised an access to an RDM instance to bypass the vault master password via the offline mode feature.

The InstaWP Connect – 1-click WP Staging & Migration plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 0.1.0.44. This is due to insufficient verification of the API key. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username, and to perform a variety of other administrative tasks. NOTE: This vulnerability was partially fixed in 0.1.0.44, but was still exploitable via Cross-Site Request Forgery.

On certain TOTOLINK Realtek SDK based routers, the CAPTCHA text can be retrieved via an {"topicurl":"setting/getSanvas"} POST to the boafrm/formLogin URI, leading to a CAPTCHA bypass. (Also, the CAPTCHA text is not needed once the attacker has determined valid credentials. The attacker can perform router actions via HTTP requests with Basic Authentication.) This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0.

Improper Authentication vulnerability in Progress MOVEit Transfer (SFTP module) can lead to Authentication Bypass.This issue affects MOVEit Transfer: from 2023.0.0 before 2023.0.11, from 2023.1.0 before 2023.1.6, from 2024.0.0 before 2024.0.2.

D-Link DIR-816 A2 1.10 B05 allows unauthenticated attackers to arbitrarily reset the device via a crafted tokenid parameter to /goform/form2Reboot.cgi.

A vulnerability in the TP-Link Archer c20 router with firmware version V6.6_230412 and earlier permits unauthorized individuals to bypass the authentication of some interfaces under the /cgi directory. When adding Referer: http://tplinkwifi.net to the the request, it will be recognized as passing the authentication. NOTE: this is disputed by the Supplier because the response to the API call is only "non-sensitive UI initialization variables."

A vulnerability has been identified in SINAMICS S200 (All versions with serial number beginning with SZVS8, SZVS9, SZVS0 or SZVSN and the FS number is 02). The affected device contains an unlocked bootloader. This security oversight enables attackers to inject malicious code, or install untrusted firmware. The intrinsic security features designed to protect against data manipulation and unauthorized access are compromised when the bootloader is not secured.

SKYSEA Client View Ver.11.221.03 and earlier allows remote code execution via a flaw in processing authentication on the TCP connection with the management console program.

A vulnerability classified as critical was found in Mediabridge Medialink. This vulnerability affects unknown code of the file /index.asp. The manipulation leads to improper authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-210700.

An Improper Authentication vulnerability in the SSLVPN authentication mechanism allows a remote attacker to bypass authentication.

The Lifeline Donation plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.2.6. This is due to insufficient verification on the user being supplied during the checkout through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

A vulnerability has been identified in Cerberus DMS (All versions), Desigo CC (All versions), Desigo CC Compact (All versions), SIMATIC WinCC OA V3.16 (All versions in default configuration), SIMATIC WinCC OA V3.17 (All versions in non-default configuration), SIMATIC WinCC OA V3.18 (All versions in non-default configuration). Affected applications use client-side only authentication, when neither server-side authentication (SSA) nor Kerberos authentication is enabled. In this configuration, attackers could impersonate other users or exploit the client-server protocol without being authenticated.

jeewx-boot 1.3 has an authentication bypass vulnerability in the preHandle function

zhisheng17 blog 3.0.1-SNAPSHOT has an authentication bypass vulnerability. An attacker can exploit this vulnerability to access API without any token.

An issue was discovered in DriveLock 24.1 through 24.1.*, 24.2 through 24.2.*, and 25.1 through 25.1.*. An incomplete configuration (agent authentication) in DriveLock tenant allows attackers to impersonate any DriveLock agent on the network against the DES (DriveLock Enterprise Service).

Dell PowerProtect Cyber Recovery versions before 19.11.0.2 contain an authentication bypass vulnerability. A remote unauthenticated attacker may potentially access and interact with the docker registry API leading to an authentication bypass. The attacker may potentially alter the docker images leading to a loss of integrity and confidentiality

Authentication Bypass by Primary Weakness vulnerability in Swoop 1-Click Login: Passwordless Authentication allows Authentication Bypass.This issue affects 1-Click Login: Passwordless Authentication: 1.4.5.

The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr parameter to ping.ccp.

After performing a sequence of Power FW950, FW1010 maintenance operations a SRIOV network adapter can be improperly configured leading to desired VEPA configuration being disabled. IBM X-Force ID: 229695.

DMA Softlab Radius Manager 4.4.0 assigns the same session cookie to every admin session. The cookie is valid when the admin is logged in, but is invalid (temporarily) during times when the admin is logged out. In other words, the cookie is functionally equivalent to a static password, and thus provides permanent access if stolen.

A vulnerability has been found in harrystech Dynosaur-Rails and classified as critical. Affected by this vulnerability is the function basic_auth of the file app/controllers/application_controller.rb. The manipulation leads to improper authentication. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named 04b223813f0e336aab50bff140d0f5889c31dbec. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-221503.

The pam_sm_authenticate function in pam_sshauth.c in libpam-sshauth might allow context-dependent attackers to bypass authentication or gain privileges via a system user account.

The crewjam/saml go library prior to version 0.4.9 is vulnerable to an authentication bypass when processing SAML responses containing multiple Assertion elements. This issue has been corrected in version 0.4.9. There are no workarounds other than upgrading to a fixed version.

CA Automic Automation 12.2 and 12.3 contain an authentication error vulnerability in the Automic agent that could allow a remote attacker to potentially execute arbitrary commands.

FACTION is a PenTesting Report Generation and Collaboration Framework. Prior to version 1.7.1, an extension execution path in Faction’s extension framework permits untrusted extension code to execute arbitrary system commands on the server when a lifecycle hook is invoked, resulting in remote code execution (RCE) on the host running Faction. Due to a missing authentication check on the /portal/AppStoreDashboard endpoint, an attacker can access the extension management UI and upload a malicious extension without any authentication, making this vulnerability exploitable by unauthenticated users. This issue has been patched in version 1.7.1.

Moxa Device Server Web Console 5232-N allows remote attackers to bypass authentication, and consequently modify settings and data, via vectors related to reading a cookie parameter containing a UserId value.

On Grandstream GXV3611IR_HD before 1.0.3.23 devices, the root account lacks a password.

Authentication Bypass vulnerability in miniOrange WP OAuth Server plugin <= 3.0.4 at WordPress.

An issue was discovered in RWS WorldServer before 11.7.3. Adding a token parameter with the value of 02 bypasses all authentication requirements. Arbitrary Java code can be uploaded and executed via a .jar archive to the ws-api/v2/customizations/api endpoint.

Meshtastic is an open source, off-grid, decentralized, mesh network. Meshtastic uses MQTT to communicate over an internet connection to a shared or private MQTT Server. Nodes can communicate directly via an internet connection or proxied through a connected phone (i.e., via bluetooth). Prior to version 2.5.1, multiple weaknesses in the MQTT implementation allow for authentication and authorization bypasses resulting in unauthorized control of MQTT-connected nodes. Version 2.5.1 contains a patch.

ZITADEL is an open source identity management platform. Starting in version 2.50.0 and prior to versions 2.71.19, 3.4.4, and 4.6.6, a vulnerability in ZITADEL's federation process allowed auto-linking users from external identity providers to existing users in ZITADEL even if the corresponding IdP was not active or if the organization did not allow federated authentication. This vulnerability stems from the platform's failure to correctly check or enforce an organization's specific security settings during the authentication flow. An Organization Administrator can explicitly disable an IdP or disallow federation, but this setting was not being honored during the auto-linking process. This allowed an unauthenticated attacker to initiate a login using an IdP that should have been disabled for that organization. The platform would incorrectly validate the login and, based on a matching criteria, link the attacker's external identity to an existing internal user account. This may result in a full Account Takeover, bypassing the organization's mandated security controls. Note that accounts with MFA enabled can not be taken over by this attack. Also note that only IdPs create on an instance level would allow this to work. IdPs registered on another organization would always be denied in the (auto-)linking process. Versions 4.6.6, 3.4.4, and 2.71.19 resolve the issue by correctly validating the organization's login policy before auto-linking an external user. No known workarounds are available aside from upgrading.

FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. Versions are vulnerable to authentication bypass when the authentication type is set to "webserver." When providing an Authorization header with an arbitrary value, a session is associated with the target user regardless of valid credentials. This issue is fixed in versions 16.0.44 and 17.0.23.

confirm.php in ATutor 2.2 and earlier allows remote attackers to bypass authentication and gain access as an existing user via the auto_login parameter.

python-requests-Kerberos through 0.5 does not handle mutual authentication

An issue was discovered in vesoft NebulaGraph through 3.8.0. It allows bypassing authentication.

The Newtec Celox UHD (models: CELOXA504, CELOXA820) running firmware version celox-21.6.13 is vulnerable to an authentication bypass. An attacker can exploit this issue by modifying intercepted responses from the /celoxservice endpoint. By injecting a forged response body during the loginWithUserName flow, the attacker can gain Superuser or Operator access without providing valid credentials.

CVE-2024-45823 IMPACT An authentication bypass vulnerability exists in the affected product. The vulnerability exists due to shared secrets across accounts and could allow a threat actor to impersonate a user if the threat actor is able to enumerate additional information required during authentication.

A CWE-287: Improper Authentication vulnerability exists that could allow an attacker to gain control of the device when logging into a web page. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)