The WP Reset – Most Advanced WordPress Reset Tool plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.0 via the use of insufficiently random snapshot names. This makes it possible for unauthenticated attackers to extract sensitive data including site backups by brute-forcing the snapshot filenames. Please note that the vendor does not plan to do any further hardening on this functionality.

A vulnerability, which was classified as problematic, has been found in D-Link DNS-320 2.02b01. Affected by this issue is some unknown functionality of the file /cgi-bin/widget_api.cgi of the component Web Management Interface. The manipulation of the argument getHD/getSer/getSys leads to information disclosure. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

Information Disclosure in Operator Client application in BVMS 10.1.1, 11.0 and 11.1.0 and VIDEOJET Decoder VJD-7513 versions 10.23 and 10.30 allows man-in-the-middle attacker to compromise confidential video stream. This is only applicable for UDP encryption when target system contains cameras with platform CPP13 or CPP14 and firmware version 8.x.

OpenStack Nova before 2012.1 allows someone with access to an EC2_ACCESS_KEY (equivalent to a username) to obtain the EC2_SECRET_KEY (equivalent to a password). Exposing the EC2_ACCESS_KEY via http or tools that allow man-in-the-middle over https could allow an attacker to easily obtain the EC2_SECRET_KEY. An attacker could also presumably brute force values for EC2_ACCESS_KEY.

UnsafeAccessor (UA) is a bridge to access jdk.internal.misc.Unsafe & sun.misc.Unsafe. Normally, if UA is loaded as a named module, the internal data of UA is protected by JVM and others can only access UA via UA's standard API. The main application can set up `SecurityCheck.AccessLimiter` for UA to limit access to UA. Starting with version 1.4.0 and prior to version 1.7.0, when `SecurityCheck.AccessLimiter` is set up, untrusted code can access UA without limitation, even when UA is loaded as a named module. This issue does not affect those for whom `SecurityCheck.AccessLimiter` is not set up. Version 1.7.0 contains a patch.

The Mechanize library is used for automating interaction with websites. Mechanize automatically stores and sends cookies, follows redirects, and can follow links and submit forms. In versions prior to 2.8.5 the Authorization header is leaked after a redirect to a different port on the same site. Users are advised to upgrade to Mechanize v2.8.5 or later. There are no known workarounds for this issue.

Discourse is an open source platform for community discussion. This vulnerability only impacts Discourse instances configured to use `FileStore::LocalStore` which means uploads and backups are stored locally on disk. If an attacker knows the name of the Discourse backup file, the attacker can trick nginx into sending the Discourse backup file with a well crafted request. This issue is patched in the latest stable, beta and tests-passed versions of Discourse. Users are advised to upgrade. Users unable to upgrade can either 1. Download all local backups on to another storage device, disable the `enable_backups` site setting and delete all backups until the site has been upgraded to pull in the fix. Or 2. Change the `backup_location` site setting to `s3` so that backups are stored and downloaded directly from S3.

Nextcloud Server is a self hosted personal cloud system. After storing "Global credentials" on the server, the API returns them and adds them into the frontend again, allowing to read them in plain text when an attacker already has access to an active session of a user. It is recommended that the Nextcloud Server is upgraded to 28.0.11, 29.0.8 or 30.0.1 and Nextcloud Enterprise Server is upgraded to 25.0.13.13, 26.0.13.9, 27.1.11.9, 28.0.11, 29.0.8 or 30.0.1.

Metabase is an open source business intelligence and analytics application. Metabase has a proxy to load arbitrary URLs for JSON maps as part of our GeoJSON support. While we do validation to not return contents of arbitrary URLs, there is a case where a particularly crafted request could result in file access on windows, which allows enabling an `NTLM relay attack`, potentially allowing an attacker to receive the system password hash. If you use Windows and are on this version of Metabase, please upgrade immediately. The following patches (or greater versions) are available: 0.42.4 and 1.42.4, 0.41.7 and 1.41.7, 0.40.8 and 1.40.8.

Action Pack is a framework for handling and responding to web requests. Under certain circumstances response bodies will not be closed. In the event a response is *not* notified of a `close`, `ActionDispatch::Executor` will not know to reset thread local state for the next request. This can lead to data being leaked to subsequent requests.This has been fixed in Rails 7.0.2.1, 6.1.4.5, 6.0.4.5, and 5.2.6.1. Upgrading is highly recommended, but to work around this problem a middleware described in GHSA-wh98-p28r-vrc9 can be used.

Puma is a Ruby/Rack web server built for parallelism. Prior to `puma` version `5.6.2`, `puma` may not always call `close` on the response body. Rails, prior to version `7.0.2.2`, depended on the response body being closed in order for its `CurrentAttributes` implementation to work correctly. The combination of these two behaviors (Puma not closing the body + Rails' Executor implementation) causes information leakage. This problem is fixed in Puma versions 5.6.2 and 4.3.11. This problem is fixed in Rails versions 7.02.2, 6.1.4.6, 6.0.4.6, and 5.2.6.2. Upgrading to a patched Rails _or_ Puma version fixes the vulnerability.

gnark is a fast zk-SNARK library that offers a high-level API to design circuits. Prior to version 0.11.0, commitments to private witnesses in Groth16 as implemented break the zero-knowledge property. The vulnerability affects only Groth16 proofs with commitments. Notably, PLONK proofs are not affected. The vulnerability affects the zero-knowledge property of the proofs - in case the witness (secret or internal) values are small, then the attacker may be able to enumerate all possible choices to deduce the actual value. If the possible choices for the variables to be committed is large or there are many values committed, then it would be computationally infeasible to enumerate all valid choices. It doesn't affect the completeness/soundness of the proofs. The vulnerability has been fixed in version 0.11.0. The patch to fix the issue is to add additional randomized value to the list of committed value at proving time to mask the rest of the values which were committed. As a workaround, the user can manually commit to a randomized value.

This issue was addressed by using HTTPS when sending information over the network. This issue is fixed in Apple Music 3.5.0 for Android. An attacker in a privileged network position can track a user's activity.

In wlan driver, there is a possible memory leak due to improper input handling. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00351241; Issue ID: MSV-1173.

IBM QRadar SIEM 7.4 and 7.5 is vulnerable to information exposure allowing a non-tenant user with a specific domain security profile assigned to see some data from other domains. IBM X-Force ID: 230402.

The File Manager, Code Editor, and Backup by Managefy plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.6.1 through publicly exposed log files. This makes it possible for unauthenticated attackers to view information like full paths and full paths to backup files information contained in the exposed log files.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow an attacker to obtain sensitive information due to insecure communications being used between the application and server. IBM X-Force ID: 183935.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Smackcoders Export All Posts, Products, Orders, Refunds & Users.This issue affects Export All Posts, Products, Orders, Refunds & Users: from n/a through 2.4.1.

SSL virtual servers in F5 BIG-IP systems 10.x before 10.2.4 HF9, 11.x before 11.2.1 HF12, 11.3.0 before HF10, 11.4.0 before HF8, 11.4.1 before HF5, 11.5.0 before HF5, and 11.5.1 before HF5, when used with third-party Secure Sockets Layer (SSL) accelerator cards, might allow remote attackers to have unspecified impact via a timing side-channel attack.

Mahavitaran android application 7.50 and prior transmit sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header, MITM or browser history.

FOG is a free open-source cloning/imaging/rescue suite/inventory management system. The hostinfo page has missing/improper access control since only the host's mac address is required to obtain the configuration information. This data can only be retrieved if a task is pending on that host. Otherwise, an error message containing "Invalid tasking!" will be returned. The domainpassword in the hostinfo dump is hidden even to authenticated users, as it is displayed as a row of asterisks when navigating to the host's Active Directory settings. This vulnerability is fixed in 1.5.10.41.

In RACTF before commit f3dc89b, unauthenticated users are able to get the value of sensitive config keys that would normally be hidden to everyone except admins. All versions after commit f3dc89b9f6ab1544a289b3efc06699b13d63e0bd(3/10/20) are patched.

IBM Db2 for Linux, UNIX and Windows 10.5, 11.1, and 11.5 is vulnerable to information Disclosure due to improper privilege management when a specially crafted table access is used. IBM X-Force ID: 241671.

Pion DTLS is a Go implementation of Datagram Transport Layer Security. Pion DTLS versions v1.0.0 through v3.0.10 and 3.1.0 use random nonce generation with AES GCM ciphers, which makes it easier for remote attackers to obtain the authentication key and spoof data by leveraging the reuse of a nonce in a session and a "forbidden attack". Upgrade to v3.0.11, v3.1.1, or later.

There is a carry propagating bug in the x86_64 Montgomery squaring procedure in OpenSSL 1.0.2 before 1.0.2k and 1.1.0 before 1.1.0d. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be very significant and likely only accessible to a limited number of attackers. An attacker would additionally need online access to an unpatched system using the target private key in a scenario with persistent DH parameters and a private key that is shared between multiple clients. For example this can occur by default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very similar to CVE-2015-3193 but must be treated as a separate problem.

The Guest posting / Frontend Posting / Front Editor WordPress plugin before 5.0.6 allows passing a URL parameter to regenerate a .json file based on demo data that it initially creates. If an administrator modifies the demo form and enables admin notifications in the Guest posting / Frontend Posting / Front Editor WordPress plugin before 5.0.6's settings, it is possible for an unauthenticated attacker to export and download all of the form data/settings, including the administrator's email address.

Check_MK before 1.2.8p26 mishandles certain errors within the failed-login save feature because of a race condition, which allows remote attackers to obtain sensitive user information by reading a GUI crash report.

The HTTPS protocol, as used in unspecified web applications, can encrypt compressed data without properly obfuscating the length of the unencrypted data, which makes it easier for man-in-the-middle attackers to obtain plaintext secret values by observing length differences during a series of guesses in which a string in an HTTP request URL potentially matches an unknown string in an HTTP response body, aka a "BREACH" attack, a different issue than CVE-2012-4929.

The MainWP Child plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to, and including, 4.4.1.1 due to insufficient controls on the storage of back-up files. This makes it possible for unauthenticated attackers to extract sensitive data including the entire installations database if a backup occurs and the deletion of the back-up files fail.

The Test LDAP Users functionality in Liferay Portal 7.0.0 through 7.4.3.4, and Liferay DXP 7.0 fix pack 102 and earlier, 7.1 before fix pack 27, 7.2 before fix pack 17, 7.3 before update 4, and DXP 7.4 GA includes the LDAP credential in the page URL when paginating through the list of users, which allows man-in-the-middle attackers or attackers with access to the request logs to see the LDAP credential.

IBM Spectrum Virtualize 8.5, under certain circumstances, could disclose sensitive credential information while a download from Fix Central is in progress. IBM X-Force ID: 249518.

php/elFinder.class.php in elFinder before 2.1.45 leaks information if PHP's curl extension is enabled and safe_mode or open_basedir is not set.

IBM PowerVM Hypervisor FW950.00 through FW950.71, FW1010.00 through FW1010.40, FW1020.00 through FW1020.20, and FW1030.00 through FW1030.11 could allow an attacker to obtain sensitive information if they gain service access to the HMC. IBM X-Force ID: 247592.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in mbbhatti Upload Resume.This issue affects Upload Resume: from n/a through 1.2.0.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Smackcoders Export All Posts, Products, Orders, Refunds & Users.This issue affects Export All Posts, Products, Orders, Refunds & Users: from n/a through 2.4.1.

Information exposure vulnerability in OpenGnsys affecting version 1.1.1d (Espeto). This vulnerability allows an attacker to view a php backup file (controlaccess.php-LAST) where database credentials are stored.

A vulnerability classified as problematic has been found in Zhejiang Land Zongheng Network Technology O2OA up to 20240403. Affected is an unknown function of the file /x_portal_assemble_surface/jaxrs/portal/list?v=8.2.3-4-43f4fe3. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. VDB-260478 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The HTTP header in Philips EncoreAnywhere contains data an attacker may be able to use to gain sensitive information.

Cursor is a code editor built for programming with AI. Prior to 0.51.0, by default, the setting json.schemaDownload.enable was set to True. This means that by writing a JSON file, an attacker can trigger an arbitrary HTTP GET request that does not require user confirmation. Since the Cursor Agent can edit JSON files, this means a malicious agent, for example, after a prompt injection attack already succeeded, could trigger a GET request to an attacker controlled URL, potentially exfiltrating other data the agent may have access to. This vulnerability is fixed in 0.51.0.

The Database Toolset plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.8.4 via backup files stored in a publicly accessible location. This makes it possible for unauthenticated attackers to extract sensitive data from database backup files. An index file is present, so a brute force attack would need to be successful in order to compromise any data.

Windows Kerberos Information Disclosure Vulnerability

A vulnerability was detected in PHPGurukul News Portal 1.0. The impacted element is an unknown function of the file /onps/settings.py. Performing a manipulation results in insertion of sensitive information into debugging code. It is possible to initiate the attack remotely. The attack's complexity is rated as high. The exploitability is regarded as difficult. The exploit is now public and may be used.

The Fancy Product Designer plugin for WordPress is vulnerable to Information Disclosure and PHAR Deserialization in all versions up to, and including, 6.4.8. This is due to insufficient validation of user-supplied input in the 'url' parameter of the 'fpd_custom_uplod_file' AJAX action, which flows directly into the 'getimagesize' function without sanitization. This makes it possible for unauthenticated attackers to read arbitrary sensitive files from the server, including wp-config.php.

The Backup Migration WordPress plugin before 2.0.0 does not properly generate its backup path in certain server configurations, allowing unauthenticated users to fetch a log that discloses the backup filename. The backup archive is then downloadable without authentication.

A weakness has been identified in JhumanJ OpnForm up to 1.9.3. This affects an unknown function of the file /api/password/email of the component Forgotten Password Handler. This manipulation causes information exposure through discrepancy. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is reported as difficult. The exploit has been made available to the public and could be exploited. This issue is currently aligned with Laravel issue #46465, which is why no mitigation action was taken.

An Exposure of Sensitive Information to an Unauthorized Actor vulnerability [CWE-200] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.1, FortiOS 7.4.0 through 7.4.6, FortiOS 7.2 all versions, FortiOS 7.0 all versions, FortiOS 6.4 all versions may allow a remote unauthenticated attacker to bypass the patch developed for the symbolic link persistency mechanism observed in some post-exploit cases, via crafted HTTP requests. An attacker would need first to have compromised the product via another vulnerability, at filesystem level.

A non-default configuration in Sage DPW 2025_06_004 allows unauthenticated access to diagnostic endpoints within the Database Monitor feature, exposing sensitive information such as hashes and table names. This feature is disabled by default in all installations and never available in Sage DPW Cloud. It was forcibly disabled again in version 2025_06_003.

Cursor is a code editor built for programming with AI. In versions 1.6 and below, Mermaid (a to render diagrams) allows embedding images which then get rendered by Cursor in the chat box. An attacker can use this to exfiltrate sensitive information to a third-party attacker controlled server through an image fetch after successfully performing a prompt injection. A malicious model (or hallucination/backdoor) might also trigger this exploit at will. This issue requires prompt injection from malicious data (web, image upload, source code) in order to exploit. In that case, it can send sensitive information to an attacker-controlled external server. Some additional bypasses not covered in the initial fix to this issue were discovered, see GHSA-43wj-mwcc-x93p. This issue is fixed in version 1.7.

This issue was addressed with improved data protection. This issue is fixed in macOS Ventura 13. A user in a privileged network position may be able to track user activity.

liboqs is a C-language cryptographic library that provides implementations of post-quantum cryptography algorithms. Multiple secret-dependent branches have been identified in the reference implementation of the HQC key encapsulation mechanism when it is compiled with Clang for optimization levels above -O0 (-O1, -O2, etc). A proof-of-concept local attack exploits this secret-dependent information to recover the entire secret key. This vulnerability is fixed in 0.14.0.