A vulnerability in the TLS processing feature of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an issue that occurs when TLS traffic is processed. An attacker could exploit this vulnerability by sending certain TLS traffic over IPv4 through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition and impacting traffic to and through the affected device.
A vulnerability in the IPv4 Software-Defined Access (SD-Access) fabric edge node feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization and stop all traffic processing, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain IPv4 packets. An attacker could exploit this vulnerability by sending certain IPv4 packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition.
A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of received IPv4 PIMv2 packets. An attacker could exploit this vulnerability by sending a crafted PIMv2 packet to a PIM-enabled interface on an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Note: This vulnerability can be exploited with either an IPv4 multicast or unicast packet.
A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap underflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic..
A vulnerability in the IP packet processing of Cisco Access Point (AP) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of certain IPv4 packets. An attacker could exploit this vulnerability by sending a crafted IPv4 packet either to or through an affected device. A successful exploit could allow the attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To successfully exploit this vulnerability, the attacker does not need to be associated with the affected AP. This vulnerability cannot be exploited by sending IPv6 packets.
A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a crafted IPv4 DHCP request packet being mishandled when endpoint analytics are enabled. An attacker could exploit this vulnerability by sending a crafted DHCP request through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: The attack vector is listed as network because a DHCP relay anywhere on the network could allow exploits from networks other than the adjacent one.
A vulnerability in the management and VPN web servers for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to incomplete error checking when parsing an HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted web server on a device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads.
A vulnerability in the implementation of the IPv4 fragmentation reassembly code in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper management of resources during fragment reassembly. An attacker could exploit this vulnerability by sending specific sizes of fragmented packets to an affected device or through a Virtual Fragmentation Reassembly (VFR)-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability affects Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers if they are running Cisco IOS XE Software Release 17.12.1 or 17.12.1a.
A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: This vulnerability could be exploited over either IPv4 or IPv6 transport.
A vulnerability in the process that classifies traffic that is going to the Unified Threat Defense (UTD) component of Cisco IOS XE Software in controller mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because UTD improperly handles certain packets as those packets egress an SD-WAN IPsec tunnel. An attacker could exploit this vulnerability by sending crafted traffic through an SD-WAN IPsec tunnel that is configured on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: SD-WAN tunnels that are configured with Generic Routing Encapsulation (GRE) are not affected by this vulnerability.
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.
A vulnerability in the HTTPS decryption feature of Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Secure Sockets Layer (SSL) server certificates. An attacker could exploit this vulnerability by installing a malformed certificate in a web server and sending a request to it through the Cisco WSA. A successful exploit could allow the attacker to cause an unexpected restart of the proxy process on an affected device.
A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability are due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
A vulnerability in the TCP processing engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of TCP traffic. An attacker could exploit this vulnerability by sending a specific sequence of packets at a high rate through an affected device. A successful exploit could allow the attacker to temporarily disrupt traffic through the device while it reboots.
A vulnerability in the implementation of the Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains a specific BGP attribute. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim’s BGP network on an existing, valid TCP connection to a BGP peer.
Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.
A vulnerability in the Cisco TrustSec (CTS) Protected Access Credential (PAC) provisioning module of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of attributes in RADIUS messages. An attacker could exploit this vulnerability by sending a malicious RADIUS message to an affected device while the device is in a specific state.
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain L2TP packets. An attacker could exploit this vulnerability by sending crafted L2TP packets to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability.
A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.
A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted.
A vulnerability in the internal packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain packets when they are sent to the inspection engine. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to deplete all 9,472 byte blocks on the device, resulting in traffic loss across the device or an unexpected reload of the device. If the device does not reload on its own, a manual reload of the device would be required to recover from this state.
A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the proxy service of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management in the proxy service of an affected device. An attacker could exploit this vulnerability by establishing a large number of HTTPS connections to the affected device. A successful exploit could allow the attacker to cause the system to stop processing new connections, which could result in a DoS condition. Note: Manual intervention may be required to recover from this situation.
A vulnerability in the IP Service Level Agreements (IP SLA) responder and Two-Way Active Measurement Protocol (TWAMP) features of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause device packet memory to become exhausted or cause the IP SLA process to crash, resulting in a denial of service (DoS) condition. This vulnerability exists because socket creation failures are mishandled during the IP SLA and TWAMP processes. An attacker could exploit this vulnerability by sending specific IP SLA or TWAMP packets to an affected device. A successful exploit could allow the attacker to exhaust the packet memory, which will impact other processes, such as routing protocols, or crash the IP SLA process.
A vulnerability in the TCP Normalizer of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software operating in transparent mode could allow an unauthenticated, remote attacker to poison MAC address tables, resulting in a denial of service (DoS) vulnerability. This vulnerability is due to incorrect handling of certain TCP segments when the affected device is operating in transparent mode. An attacker could exploit this vulnerability by sending a crafted TCP segment through an affected device. A successful exploit could allow the attacker to poison the MAC address tables in adjacent devices, resulting in network disruption.
A vulnerability in the AnyConnect SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an implementation error within the SSL/TLS session handling process that can prevent the release of a session handler under specific conditions. An attacker could exploit this vulnerability by sending crafted SSL/TLS traffic to an affected device, increasing the probability of session handler leaks. A successful exploit could allow the attacker to eventually deplete the available session handler pool, preventing new sessions from being established and causing a DoS condition.
A vulnerability in the hardware-based SSL/TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to an implementation error within the cryptographic functions for SSL/TLS traffic processing when they are offloaded to the hardware. An attacker could exploit this vulnerability by sending a crafted stream of SSL/TLS traffic to an affected device. A successful exploit could allow the attacker to cause an unexpected error in the hardware-based cryptography engine, which could cause the device to reload.
A vulnerability in the Device Management Servlet application of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when parsing HTTP requests. An attacker could exploit this vulnerability by sending a sustained stream of crafted requests to an affected device. A successful exploit could allow the attacker to cause all subsequent requests to be dropped, resulting in a DoS condition.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in Application Quality of Experience (AppQoE) and Unified Threat Defense (UTD) on Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to the mishandling of a crafted packet stream through the AppQoE or UTD application. An attacker could exploit this vulnerability by sending a crafted packet stream through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of email messages that contain large attachments. An attacker could exploit this vulnerability by sending a malicious email message through the targeted device. A successful exploit could allow the attacker to cause a permanent DoS condition due to high CPU utilization. This vulnerability may require manual intervention to recover the ESA.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the IPv6 DHCP version 6 (DHCPv6) relay and server features of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to insufficient validation of data boundaries. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based user interface of certain Cisco Small Business Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges on an affected device. These vulnerabilities are due to improper validation of requests that are sent to the web interface. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Multicast Leaf Recycle Elimination (mLRE) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect handling of certain IPv6 multicast packets when they are fanned out more than seven times on an affected device. An attacker could exploit this vulnerability by sending a specific IPv6 multicast or IPv6 multicast VPN (MVPNv6) packet through the affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition.
A vulnerability in ICMPv6 processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper processing of ICMPv6 messages. An attacker could exploit this vulnerability by sending crafted ICMPv6 messages to a targeted Cisco ASA or FTD system with IPv6 enabled. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the fragmentation handling code of tunnel protocol packets in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected system to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of large fragmented tunnel protocol packets. One example of a tunnel protocol is Generic Routing Encapsulation (GRE). An attacker could exploit this vulnerability by sending crafted fragmented packets to an affected system. A successful exploit could allow the attacker to cause the affected system to reload, resulting in a DoS condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability.
A vulnerability in the implementation of the IPv4 Virtual Fragmentation Reassembly (VFR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper reassembly of large packets that occurs when VFR is enabled on either a tunnel interface or on a physical interface that is configured with a maximum transmission unit (MTU) greater than 4,615 bytes. An attacker could exploit this vulnerability by sending fragmented packets through a VFR-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.
A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition.
A vulnerability in the Internet Key Exchange Version 2 Mobility and Multihoming Protocol (MOBIKE) feature for the Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to the incorrect processing of certain MOBIKE packets. An attacker could exploit this vulnerability by sending crafted MOBIKE packets to an affected device to be processed. A successful exploit could cause an affected device to continuously consume memory and eventually reload, resulting in a DoS condition. The MOBIKE feature is supported only for IPv4 addresses.
A vulnerability in the Rate Limiting Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization in the Cisco QuantumFlow Processor of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to mishandling of the rate limiting feature within the QuantumFlow Processor. An attacker could exploit this vulnerability by sending large amounts of traffic that would be subject to NAT and rate limiting through an affected device. A successful exploit could allow the attacker to cause the QuantumFlow Processor utilization to reach 100 percent on the affected device, resulting in a DoS condition.
A vulnerability in the software cryptography module of the Cisco Adaptive Security Virtual Appliance (ASAv) and Firepower 2100 Series running Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error with how the software cryptography module handles IPsec sessions. An attacker could exploit this vulnerability by creating and sending traffic in a high number of IPsec sessions through the targeted device. A successful exploit could cause the device to reload and result in a DoS condition.