Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in TP-Link TP-Link EX20v AX1800, Tp-Link Archer C5v AC1200, Tp-Link TD-W9970, Tp-Link TD-W9970v3, TP-Link VX220-G2u, TP-Link VN020-G2u allows authenticated OS Command Injection. This issue affects TP-Link EX20v AX1800, Tp-Link Archer C5v AC1200, Tp-Link TD-W9970, Tp-Link TD-W9970v3 : through 20240328. Also  the vulnerability continues in the TP-Link VX220-G2u and TP-Link VN020-G2u models due to the products not being produced and supported.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow triggerPort OS Command Injection (issue 5 of 5).

A post authentication command injection vulnerability exists when configuring the wireguard VPN functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection . An attacker can make an authenticated HTTP request to trigger this vulnerability.

A post authentication command injection vulnerability exists in the GRE policy functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow externalPort OS Command Injection (issue 1 of 5).

A post authentication command injection vulnerability exists in the ipsec policy functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A post authentication command injection vulnerability exists when configuring the web group member of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A post authentication command execution vulnerability exists in the web filtering functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow portMappingProtocol OS Command Injection (issue 3 of 5).

TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow serviceName OS Command Injection (issue 4 of 5).

A post authentication command injection vulnerability exists when setting up the PPTP global configuration of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Deco M4 firmware versions prior to 'Deco M4(JP)_V2_1.5.8 Build 20230619' allows a network-adjacent authenticated attacker to execute arbitrary OS commands.

Multiple TP-LINK products allow a network-adjacent authenticated attacker to execute arbitrary OS commands. Affected products/versions are as follows: Archer AX50 firmware versions prior to 'Archer AX50(JP)_V1_230529', Archer A10 firmware versions prior to 'Archer A10(JP)_V2_230504', Archer AX10 firmware versions prior to 'Archer AX10(JP)_V1.2_230508', and Archer AX11000 firmware versions prior to 'Archer AX11000(JP)_V1_230523'.

Archer C5400 firmware versions prior to 'Archer C5400(JP)_V2_230506' allows a network-adjacent authenticated attacker to execute arbitrary OS commands.

A post-authentication command injection vulnerability exists in the PPTP client functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability and gain access to an unrestricted shell.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a remote code execution (RCE) vulnerability via the function oal_wan6_setIpAddr.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain a command injection vulnerability via the component oal_startPing.

A Command Injection vulnerability exists in the ap parameter to the /cgi-bin/mft/wireless_mft.cgi file in TP-Link IP Cameras TL-SC 3130, TL-SC 3130G, 3171G. and 4171G 1.6.18P12s, which could let a malicious user execute arbitrary code.

Improper input handling in a wireless-control administrative CLI command on TP-Link Archer NX200, NX210, NX500 and NX600 allows crafted input to be executed as part of an operating system command. An authenticated attacker with administrative privileges may execute arbitrary commands on the operating system, impacting the confidentiality, integrity, and availability of the device.

There is remote authenticated OS command injection on TP-Link Archer C20i 0.9.1 3.2 v003a.0 Build 170221 Rel.55462n devices vie the X_TP_ExternalIPv6Address HTTP parameter, allowing a remote attacker to run arbitrary commands on the router with root privileges.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tmpServer service, which listens on TCP port 20002. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9662.

The web configuration interface of the TP-Link M7350 V3 with firmware version 190531 is affected by a pre-authentication command injection vulnerability.

The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by a pre-authentication command injection vulnerability.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR841N TL-WR841N(US)_V14_220121 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the ated_tp service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-17356.

A command execution vulnerability exists in the guest resource functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An unauthenticated remote code execution vulnerability was reported in some Motorola-branded Binatone Hubble Cameras that could allow an attacker on the same network unauthorized access to the device.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The /cgi-bin/luci/admin/opsw/Dual_freq_un_apple endpoint is vulnerable to command injection through the 2.4 GHz and 5 GHz name parameters, allowing an attacker to execute arbitrary commands on the device (with root-level permissions) via crafted input.

The configuration parser fails to sanitize user-controlled input in the Zyxel ATP series firmware versions 5.10 through 5.36, USG FLEX series firmware versions 5.00 through 5.36,  USG FLEX 50(W) series firmware versions 5.10 through 5.36, USG20(W)-VPN series firmware versions 5.10 through 5.36, and VPN series firmware versions 5.00 through 5.36. An unauthenticated, LAN-based attacker could leverage the vulnerability to inject some operating system (OS) commands into the device configuration data on an affected device when the cloud management mode is enabled.

D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294.

Furbo dog camera has insufficient filtering for special parameter of device log management function. An unauthenticated remote attacker in the Bluetooth network with normal user privileges can exploit this vulnerability to perform command injection attack to execute arbitrary system commands or disrupt service.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the vendor_specific DHCP opcode. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12216.

An unauthenticated command injection vulnerability exists in the parameters of operation 48 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.

WRC-300FEBK, WRC-F300NF, WRC-733FEBK, WRH-300RD, WRH-300BK, WRH-300SV, WRH-300WH, WRH-H300WH, WRH-H300BK, WRH-300BK-S, and WRH-300WH-S all versions allows an unauthenticated network-adjacent attacker to execute an arbitrary OS command via unspecified vectors.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. Certain /cgi-bin/luci/admin endpoints are vulnerable to command injection. Attackers can exploit this by sending crafted payloads through parameters intended for the ping utility, enabling arbitrary command execution with root-level permissions on the device.

D-Link DAP-1325 HNAP SetAPLanSettings DeviceName Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18808.

D-Link DAP-1325 HNAP SetAPLanSettings Gateway Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18809.

An issue was discovered on Connectize AC21000 G6 641.139.1.1256 allows attackers to run arbitrary commands via use of a crafted string in the ping utility.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

D-Link DIR_823G 1.0.2B05 was discovered to contain a command injection vulnerability via the Address parameter in the SetNetworkTomographySettings function. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticAddress Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18816.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetUSBPartitionUmount function.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via the field id_email_check_btn.