A vulnerability classified as critical was found in Wifi-soft UniBox Controller up to 20250506. Affected by this vulnerability is an unknown functionality of the file /authentication/logout.php. The manipulation of the argument mac_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation of user supplied data that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP POST request to the NX-API of an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system. Note: The NX-API feature is disabled by default.

Improper neutralization of special elements in the SonicWall SSL-VPN SMA100 series management interface allows a remote authenticated attacker to inject OS Commands which potentially leads to remote command execution vulnerability or denial of service (DoS) attack.

IBM Security Guardium 11.3, 11.4, 11.5, and 12.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 271524.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an authenticated user.

Cursor is a code editor built for programming with AI. In versions 1.2.4 and below, attackers can achieve remote and persistent code execution by modifying an already trusted MCP configuration file inside a shared GitHub repository or editing the file locally on the target's machine. Once a collaborator accepts a harmless MCP, the attacker can silently swap it for a malicious command (e.g., calc.exe) without triggering any warning or re-prompt. If an attacker has write permissions on a user's active branches of a source repository that contains existing MCP servers the user has previously approved, or allows an attacker has arbitrary file-write locally, the attacker can achieve arbitrary code execution. This is fixed in version 1.3.

An authenticated user may be able to misuse parameters to inject arbitrary operating system commands into mySCADA myPRO versions 8.25.0 and prior.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker to inject arbitrary shell commands that are executed by an affected device. The vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts with root privileges on the affected device.

A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted arguments to a specific field within the application. A successful exploit could allow the attacker to run commands as the administrator on the DCNM.

Belkin LINKSYS RE6500 devices before 1.0.11.001 allow remote authenticated users to execute arbitrary commands via goform/systemCommand?command= in conjunction with the goform/pingstart program.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. Affected is the function setSystemAdmin of the file /setSystemAdmin. The manipulation of the argument AdminID leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote authenticated users to execute arbitrary commands via shell metacharacters in a filename to the upload_settings.cgi page.

Arbitrary command execution can occur in Webmin through 1.962. Any user authorized for the Package Updates module can execute arbitrary commands with root privileges via vectors involving %0A and %0C. NOTE: this issue exists because of an incomplete fix for CVE-2019-12840.

A Command Injection issue in the traceroute feature on TP-Link TL-WR841N V13 (JP) with firmware versions prior to 201216 allows authenticated users to execute arbitrary code as root via shell metacharacters, a different vulnerability than CVE-2018-12577.

A vulnerability in the web UI of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary code and execute arbitrary commands at the underlying operating system level. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands at the underlying operating system level.

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The snaptPowered2 component of Snapt Aria v12.8 was discovered to contain a command injection vulnerability. This vulnerability allows authenticated attackers to execute arbitrary commands.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “update_checkfile” value for the “filename” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

An OS command injection vulnerability in FortiDeceptor 3.1.0, 3.0.1, 3.0.0 may allow a remote authenticated attacker to execute arbitrary commands on the system by exploiting a command injection vulnerability on the Customization page.

In QuickBox Pro v2.5.8 and below, the config.php file has a variable which takes a GET parameter value and parses it into a shell_exec(''); function without properly sanitizing any shell arguments, therefore remote code execution is possible. Additionally, as the media server is running as root by default attackers can use the sudo command within this shell_exec(''); function, which allows for privilege escalation by means of RCE.

On ASUS RT-AX55 3.0.0.4.386.51598 devices, authenticated attackers can perform OS command injection via the /start_apply.htm qos_bw_rulelist parameter. NOTE: for the similar "token-generated module" issue, see CVE-2023-41345; for the similar "token-refresh module" issue, see CVE-2023-41346; for the similar "check token module" issue, see CVE-2023-41347; and for the similar "code-authentication module" issue, see CVE-2023-41348.

An exploitable vulnerability exists in the /api/CONFIG/restore functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request trigger this vulnerability.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during account creation resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

In Apache Airflow, prior to version 2.2.4, some example DAGs did not properly sanitize user-provided params, making them susceptible to OS Command Injection from the web UI.

An issue was discovered on Rittal PDU-3C002DEC through 5.15.40 and CMCIII-PU-9333E0FB through 3.15.70_4 devices. Attackers can execute code.

In the web management interface in Foscam C1 Indoor HD Camera running application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in mail sending and receiving component in Synology Mail Station before 20211105-10315 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

An exploitable vulnerability exists in the notifications functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

An issue was discovered in EyesOfNetwork 5.3 through 5.3-8. An authenticated web user with sufficient privileges could abuse the AutoDiscovery module to run arbitrary OS commands via the nmap_binary parameter to lilac/autodiscovery.php.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SMTP configuration tests resulting in command execution

There is remote authenticated OS command injection on TP-Link Archer C20i 0.9.1 3.2 v003a.0 Build 170221 Rel.55462n devices vie the X_TP_ExternalIPv6Address HTTP parameter, allowing a remote attacker to run arbitrary commands on the router with root privileges.

In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary characters in the pureftpd.passwd file during a username change, which in turn allows for bypassing chroot restrictions in the FTP server. An attacker can simply send an HTTP request to the device to trigger this vulnerability.

Ruckus through 1.5.1.0.21 is affected by remote command injection. An authenticated user can submit a query to the API (/service/v1/createUser endpoint), injecting arbitrary commands that will be executed as root user via web.py.

File-Manager in MGT CloudPanel 2.0.0 through 2.3.2 allows the lowest privilege user to achieve OS command injection by changing file ownership and changing file permissions to 4755.

A vulnerability has been discovered in BigTree CMS 4.4.10 and earlier which allows an authenticated attacker to execute arbitrary commands through a crafted request sent to the server via the 'Create a New Setting' function.

Maxum Rumpus 8.2.13 and 8.2.14 is affected by a command injection vulnerability. The web administration contains functionality in which administrators are able to manage users. The edit users form contains a parameter vulnerable to command injection due to insufficient validation.

Gerapy is a distributed crawler management framework. Gerapy prior to version 0.9.8 is vulnerable to remote code execution, and this issue is patched in version 0.9.8.

An issue was discovered in SolarWinds N-Central 12.3.0.670. The sudo configuration has incorrect access control because the nable web user account is effectively able to run arbitrary OS commands as root (i.e., the use of root privileges is not limited to specific programs listed in the sudoers file).

ASUS RT-AC86U Traffic Analyzer - Apps analysis function has insufficient filtering of special character. A remote attacker with regular user privilege can exploit this vulnerability to perform command injection attack to execute arbitrary commands, disrupt system or terminate services.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.2 and below, version 8.5.2 and below, version 8.4.2 and below, version 8.3.2 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests to the alarm dashboard and controller config handlers.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

In systeminformation (npm package) before version 4.31.1 there is a command injection vulnerability. The problem was fixed in version 4.31.1 with a shell string sanitation fix.