Multiple authenticated command injection vulnerabilities exist in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Multiple authenticated command injection vulnerabilities exist in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300.

Multiple authenticated command injection vulnerabilities exist in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. To exploit these vulnerabilities, the attacker must have valid device credentials, but does not need Administrator privileges. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device, including on the underlying operating system, which could also affect the availability of the device.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.

Tenda AC7V1.0 v15.03.06.44 firmware contains a command injection vulnerablility in formexeCommand function via the cmdinput parameter.

An authenticated remote code execution vulnerability exists in the AOS-CX Network Analytics Engine. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system, leading to a complete compromise of the switch running AOS-CX.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in DrayTek Vigor 2960 1.5.1.4/1.5.1.5. Affected is an unknown function of the file mainfunction.cgi of the component Web Management Interface. The manipulation of the argument password leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-222258 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

A vulnerability classified as critical has been found in EasyNAS 1.1.0. Affected is the function system of the file /backup.pl. The manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

The Akuvox E11 web server backend library allows command injection in the device phone-book contacts functionality. This could allow an attacker to upload files with executable command instructions.

A10 Thunder ADC CsrRequestView Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of A10 Thunder ADC. Authentication is required to exploit this vulnerability. The specific flaw exists within the CsrRequestView class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of a10user. Was ZDI-CAN-22517.

A vulnerability has been found in Tenda FH1205 2.0.0.7(775) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258295. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

StoneFly Storage Concentrator (SC and SCVM) before 8.0.4.26 allows remote authenticated users to achieve Command Injection via a Ping URL, leading to remote code execution.

An issue in tiagorlampert CHAOS v5.0.1 allows a remote attacker to execute arbitrary code via the BuildClient function within client_service.go

A vulnerability has been found in Tenda FH1202 1.2.0.14(408) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258151. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.

IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.

Aztech WMB250AC Mesh Routers Firmware Version 016 2020 devices improperly manage sessions, which allows remote attackers to bypass authentication in opportunistic circumstances and execute arbitrary commands with administrator privileges by leveraging an existing web portal login.

A vulnerability has been found in Tenda FH1203 2.0.1.6 and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-258160. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 1). An authenticated remote attacker with access to the Web Based Management (443/tcp) of the affected product, could potentially inject commands into the dhcpd configuration of the affected product. An attacker might leverage this to trigger remote code execution on the affected component.

There is a command injection vulnerability in the TRENDnet TEW-827DRU router with firmware version 2.10B01. An attacker can inject commands into the post request parameters usapps.config.smb_admin_name in the apply.cgi interface, thereby gaining root shell privileges.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Autolab is a course management service, initially developed by a team of students at Carnegie Mellon University, that enables instructors to offer autograded programming assignments to their students over the Web. A remote code execution vulnerability was discovered in Autolab's MOSS functionality, whereby an instructor with access to the feature might be able to execute code on the server hosting Autolab. This vulnerability has been patched in version 2.10.0. As a workaround, disable the MOSS feature if it is unneeded by replacing the body of `run_moss` in `app/controllers/courses_controller.rb` with `render(plain: "Feature disabled", status: :bad_request) && return`.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the system_time_timezone parameter at function SetNTPServerSettings.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

D-Link COVR 1200,1202,1203 v1.08 was discovered to contain a command injection vulnerability via the /SetTriggerWPS/PIN parameter at function SetTriggerWPS.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TRENDnet TEW-652BRP 3.04B01. This issue affects some unknown processing of the file get_set.ccp of the component Web Management Interface. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-219935.

A command injection vulnerability exists in the 'SaveStaticRouteIPv6Params' parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.

Command Injection vulnerability discovered in 4ipnet EAP-767 device v3.42.00 within the web interface of the device allows attackers with valid credentials to inject arbitrary shell commands to be executed by the device with root privileges.

The web server of Hirschmann BAT-C2 before 09.13.01.00R04 allows authenticated command injection. This allows an authenticated attacker to pass commands to the shell of the system because the dir parameter of the FsCreateDir Ajax function is not sufficiently sanitized. The vendor's ID is BSECV-2022-21.

A command injection vulnerability exists in the 'SaveStaticRouteIPv4Params' parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.

In affected versions of Octopus Deploy it is possible for a user to introduce code via offline package creation

Delta Electronics InfraSuite Device Master versions prior to 1.0.5 contain a command injection vulnerability that could allow an attacker to inject arbitrary commands, which could result in remote code execution.

A Command injection vulnerability in RaspAP 2.8.0 thru 2.9.2 allows an authenticated attacker to execute arbitrary OS commands as root via the "entity" POST parameters in /ajax/networking/get_wgkey.php.

Vinchin Backup & Recovery v7.2 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the setNetworkCardInfo function.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability through an url parameter of an authenticated enpoint in Enphase IQ Gateway (formerly known as Envoy) allows OS Command Injection.This issue affects Envoy: from 4.x to 8.x and < 8.2.4225.

Discord-Recon is a Discord bot created to automate bug bounty recon, automated scans and information gathering via a discord server. Discord-Recon is vulnerable to remote code execution. An attacker is able to execute shell commands in the server without having an admin role. This vulnerability has been fixed in version 0.0.8.

A vulnerability in the REST API and web UI of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, low-privileged, remote attacker to perform a command injection attack against an affected device. &nbsp; This vulnerability is due to improper user authorization and insufficient validation of command arguments. An attacker could exploit this vulnerability by submitting crafted commands to an affected REST API endpoint or through the web UI. A successful exploit could allow the attacker to execute arbitrary commands on the CLI of a Cisco NDFC-managed device with network-admin privileges. &nbsp; Note: This vulnerability does not affect Cisco NDFC when it is configured for storage area network (SAN) controller deployment.

A vulnerability was found in TOTOLINK T6 4.1.5cu.748_B20211015. It has been declared as critical. This vulnerability affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component HTTP POST Request Handler. The manipulation of the argument command leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.60, DM200 before 1.0.0.66, EX2700 before 1.0.1.56, EX6150v2 before 1.0.1.86, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.128, EX6400 before 1.0.2.144, EX6400v2 before 1.0.0.128, EX6410 before 1.0.0.128, EX6420 before 1.0.0.128, EX7300 before 1.0.2.144, EX7300v2 before 1.0.0.128, EX7320 before 1.0.0.128, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.5.26, R9000 before 1.0.5.2, RAX120 before 1.0.1.128, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.80, WNR2000v5 before 1.0.0.74, XR500 before 2.3.2.66, RBK20 before 2.7.3.22, RBR20 before 2.7.3.22, RBS20 before 2.7.3.22, RBK40 before 2.7.3.22, RBR40 before 2.7.3.22, and RBS40 before 2.7.3.22.