DEK-1705 <=Firmware:34.23.1 device was discovered to have a command execution vulnerability.

Advanced Secure Gateway and Content Analysis, prior to 7.3.13.1 / 3.1.6.0, may be susceptible to a Command Injection vulnerability.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache Airflow, Apache Software Foundation Apache Airflow MySQL Provider.This issue affects Apache Airflow: before 2.5.1; Apache Airflow MySQL Provider: before 4.0.0.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. This affects the function setVpnPassCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument pptpPassThru leads to os command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

A security flaw has been discovered in DefaultFuction Content-Management-System 1.0. This issue affects some unknown processing of the file /admin/tools.php. The manipulation of the argument host results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: Multimedia Console 2.1.2 ( 2023/05/04 ) and later Multimedia Console 1.4.8 ( 2023/05/05 ) and later QTS 5.1.0.2399 build 20230515 and later QTS 4.3.6.2441 build 20230621 and later QTS 4.3.4.2451 build 20230621 and later QTS 4.3.3.2420 build 20230621 and later QTS 4.2.6 build 20230621 and later Media Streaming add-on 500.1.1.2 ( 2023/06/12 ) and later Media Streaming add-on 500.0.0.11 ( 2023/06/16 ) and later

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setIpv6LanCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument addrPrefixLen leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

Certain Tenda products are vulnerable to command injection. This affects Tenda CP7 Tenda CP7<=V11.10.00.2211041403 and Tenda CP3 v.10 Tenda CP3 v.10<=V20220906024_2025 and Tenda IT7-PCS Tenda IT7-PCS<=V2209020914 and Tenda IT7-LCS Tenda IT7-LCS<=V2209020914 and Tenda IT7-PRS Tenda IT7-PRS<=V2209020908.

A vulnerability has been found in Totolink NR1800X 9.1.0u.6279_B20210910. This issue affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi of the component Telnet Service. The manipulation of the argument host_time leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setWiFiEasyCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument merge results in os command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.

A vulnerability was determined in D-Link DIR-820LW 2.03. Affected is the function ssdpcgi_main of the component SSDP. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

There is a command injection vulnerability in SolarView Compact through 6.00, attackers can execute commands by bypassing internal restrictions through downloader.php.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain multiple command injection vulnerabilities via the rtLogEnabled and rtLogServer parameters in the setSyslogCfg function.

COMFAST CF-XR11 V2.7.2 has a command injection vulnerability in function sub_424CB4. Attackers can send POST request messages to /usr/bin/webmgnt and inject commands into parameter iface.

A vulnerability has been found in Tiandy Easy7 Integrated Management Platform up to 7.17.0. This vulnerability affects unknown code of the file /Easy7/apps/WebService/ImportSystemConfiguration.jsp of the component Configuration Handler. The manipulation of the argument File leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the function setUpgradeFW of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A vulnerability was determined in Totolink WA300 5.2cu.7112_B20190227. Affected by this issue is the function recvUpgradeNewFw of the file /cgi-bin/cstecgi.cgi. This manipulation causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A remote command injection vulnerability exists in the Barracuda Email Security Gateway (appliance form factor only) product effecting versions 5.1.3.001-9.2.0.006. The vulnerability arises out of a failure to comprehensively sanitize the processing of .tar file (tape archives). The vulnerability stems from incomplete input validation of a user-supplied .tar file as it pertains to the names of the files contained within the archive. As a consequence, a remote attacker can specifically format these file names in a particular manner that will result in remotely executing a system command through Perl's qx operator with the privileges of the Email Security Gateway product. This issue was fixed as part of BNSF-36456 patch. This patch was automatically applied to all customer appliances.

D-Link DI-8300 v16.07.26A1 is vulnerable to command injection via the upgrade_filter_asp function.

D-Link DI_8004W 16.07.26A1 contains a command execution vulnerability in jhttpd msp_info_htm function.

A specially crafted POST request to the ProGauge MAGLINK LX CONSOLE UTILITY sub-menu can allow a remote attacker to inject arbitrary commands.

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, symbol arguments to commands are vulnerable to a CRLF Injection / IMAP Command injection via Symbol arguments passed to IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via msp_info.htm.

D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file

A vulnerability was detected in LB-LINK BL-WR9000 2.4.9. This affects the function sub_458754 of the file /goform/set_wifi. The manipulation results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Ghidra/RuntimeScripts/Linux/support/launch.sh in NSA Ghidra through 10.2.2 passes user-provided input into eval, leading to command injection when calling analyzeHeadless with untrusted input.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

An issue in BL-AC2100 V1.0.4 and before allows a remote attacker to execute arbitrary code via the enable parameter passed to /goform/set_hidessid_cfg is not handled properly.

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, several Net::IMAP commands accept a raw string argument that is sent to the server without validation or escaping. If this string is derived from user-controlled input, it may contain contain CRLF sequences, which an attacker can use to inject arbitrary IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

TOTOLINK X18 v9.1.0cu.2024_B20220329 has an unauthorized arbitrary command execution in the enable parameter' of the sub_41105C function of cstecgi .cgi.

linksys E5600 V1.1.0.26 is vulnerable to command injection in the function ddnsStatus.

An issue in the handler function in /goform/telnet of Tenda FH1201 v1.2.0.14 (408) allows attackers to execute arbitrary commands via a crafted HTTP request.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A command injection vulnerability in the component /jmreport/show of jeecg boot v3.0.0 to v3.5.3 allows attackers to execute arbitrary code via a crafted HTTP request.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

TP-Link TL-WPA8630P (US)_ V2_ Version 171011 was discovered to contain a command injection vulnerability via the key parameter in the function sub_ 40A774.

A vulnerability classified as critical was found in AMTT Hotel Broadband Operation System 1.0. This vulnerability affects the function popen of the file /manager/network/port_setup.php. The manipulation of the argument SwitchVersion/SwitchWrite/SwitchIP/SwitchIndex/SwitchState leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

LB-LINK BL-AC1900_2.0 v1.0.1, LB-LINK BL-WR9000 v2.4.9, LB-LINK BL-X26 v1.2.5, and LB-LINK BL-LTE300 v1.0.8 were discovered to contain a command injection vulnerability via the mac, time1, and time2 parameters at /goform/set_LimitClient_cfg.

An Improper Input Validation in certain UniFi Access devices could allow a Command Injection by a malicious actor with access to UniFi Access management network. Affected Products: UniFi Access Reader Pro (Version 2.14.21 and earlier) UniFi Access G2 Reader Pro (Version 1.10.32 and earlier) UniFi Access G3 Reader Pro (Version 1.10.30 and earlier) UniFi Access Intercom (Version 1.7.28 and earlier) UniFi Access G3 Intercom (Version 1.7.29 and earlier) UniFi Access Intercom Viewer (Version 1.3.20 and earlier) Mitigation: Update UniFi Access Reader Pro Version 2.15.9 or later Update UniFi Access G2 Reader Pro Version 1.11.23 or later Update UniFi Access G3 Reader Pro Version 1.11.22 or later Update UniFi Access Intercom Version 1.8.22 or later Update UniFi Access G3 Intercom Version 1.8.22 or later Update UniFi Access Intercom Viewer Version 1.4.39 or later

rails-routes-to-json v1.0.0 was discovered to contain a remote code execution (RCE) vulnerability via the child_process function.

A command injection issue was found in TP-Link MR3020 v.1_150921 that allows a remote attacker to execute arbitrary commands via a crafted request to the tftp endpoint.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function urlrd_opt.asp. This vulnerability allows attackers to execute arbitrary commands via the url_en parameter.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the pppoeAcName parameter at /setting/setWanIeCfg.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the org parameter at setting/delStaticDhcpRules.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects R7800 before 1.0.2.74, R9000 before 1.0.5.2, and XR500 before 2.3.2.66.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.64, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.134, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, LBR20 before 2.6.3.50, R7800 before 1.0.2.80, R8900 before 1.0.5.26, R9000 before 1.0.5.26, RAX120 before 1.2.0.16, RBS50Y before 1.0.0.56, WNR2000v5 before 1.0.0.76, XR450 before 2.3.2.114, XR500 before 2.3.2.114, XR700 before 1.0.1.36, EX6150v2 before 1.0.1.98, EX7300 before 1.0.2.158, EX7320 before 1.0.0.134, EX6100v2 before 1.0.1.98, EX6400 before 1.0.2.158, EX7300v2 before 1.0.0.134, EX6410 before 1.0.0.134, RBR10 before 2.6.1.44, RBR20 before 2.6.2.104, RBR40 before 2.6.2.104, RBR50 before 2.7.2.102, EX6420 before 1.0.0.134, RBS10 before 2.6.1.44, RBS20 before 2.6.2.104, RBS40 before 2.6.2.104, RBS50 before 2.7.2.102, EX6400v2 before 1.0.0.134, RBK12 before 2.6.1.44, RBK20 before 2.6.2.104, RBK40 before 2.6.2.104, and RBK50 before 2.7.2.102.

Command injection vulnerabilities in the underlying CLI service could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function uploadPicture. This vulnerability allows attackers to execute arbitrary commands via the pic_name parameter.