In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is used.

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix hang in nfsd4_shutdown_callback If nfs4_client is in courtesy state then there is no point to send the callback. This causes nfsd4_shutdown_callback to hang since cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP notifies NFSD that the connection was dropped. This patch modifies nfsd4_run_cb_work to skip the RPC call if nfs4_client is in courtesy state.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE There is a WARN_ON_ONCE to catch an unlikely situation when domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless happens we must avoid using a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Ratelimit warning logs to prevent VM denial of service If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix a couple integer overflows on 32bit systems On 32bit systems the "off + sizeof(struct NTFS_DE)" addition can have an integer wrapping issue. Fix it by using size_add().

In the Linux kernel, the following vulnerability has been resolved: landlock: Handle weird files A corrupted filesystem (e.g. bcachefs) might return weird files. Instead of throwing a warning and allowing access to such file, treat them as regular files.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a memory leak in nvmet_auth_set_key When changing dhchap secrets we need to release the old secrets as well. kmemleak complaint: -- unreferenced object 0xffff8c7f44ed8180 (size 64): comm "check", pid 7304, jiffies 4295686133 (age 72034.246s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 4c 64 4c 4f 64 71 DHHC-1:00:LdLOdq 79 56 69 67 77 48 55 32 6d 5a 59 4c 7a 35 59 38 yVigwHU2mZYLz5Y8 backtrace: [<00000000b6fc5071>] kstrdup+0x2e/0x60 [<00000000f0f4633f>] 0xffffffffc0e07ee6 [<0000000053006c05>] 0xffffffffc0dff783 [<00000000419ae922>] configfs_write_iter+0xb1/0x120 [<000000008183c424>] vfs_write+0x2be/0x3c0 [<000000009005a2a5>] ksys_write+0x5f/0xe0 [<00000000cd495c89>] do_syscall_64+0x38/0x90 [<00000000f2a84ac5>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two.

In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent bpf program recursion for raw tracepoint probes We got report from sysbot [1] about warnings that were caused by bpf program attached to contention_begin raw tracepoint triggering the same tracepoint by using bpf_trace_printk helper that takes trace_printk_lock lock. Call Trace: <TASK> ? trace_event_raw_event_bpf_trace_printk+0x5f/0x90 bpf_trace_printk+0x2b/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 __unfreeze_partials+0x5b/0x160 ... The can be reproduced by attaching bpf program as raw tracepoint on contention_begin tracepoint. The bpf prog calls bpf_trace_printk helper. Then by running perf bench the spin lock code is forced to take slow path and call contention_begin tracepoint. Fixing this by skipping execution of the bpf program if it's already running, Using bpf prog 'active' field, which is being currently used by trampoline programs for the same reason. Moving bpf_prog_inc_misses_counter to syscall.c because trampoline.c is compiled in just for CONFIG_BPF_JIT option. [1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t

In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: spi: sn-f-ospi: Fix division by zero When there is no dummy cycle in the spi-nor commands, both dummy bus cycle bytes and width are zero. Because of the cpu's warning when divided by zero, the warning should be avoided. Return just zero to avoid such calculations.

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Allow waiting for commands to complete on removed device When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal. Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read.

Improper input validation in the NI-PAL kernel driver may allow a local authenticated user to cause a denial of service by triggering a crash due to a NULL pointer dereference. This vulnerability affects NI-PAL 26.3.0 and prior versions on Windows and Linux.

In the Linux kernel, the following vulnerability has been resolved: hwpoison, memory_hotplug: lock folio before unmap hwpoisoned folio Commit b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined) add page poison checks in do_migrate_range in order to make offline hwpoisoned page possible by introducing isolate_lru_page and try_to_unmap for hwpoisoned page. However folio lock must be held before calling try_to_unmap. Add it to fix this problem. Warning will be produced if folio is not locked during unmap: ------------[ cut here ]------------ kernel BUG at ./include/linux/swapops.h:400! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 4 UID: 0 PID: 411 Comm: bash Tainted: G W 6.13.0-rc1-00016-g3c434c7ee82a-dirty #41 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0xb08/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0xb08/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c Code: f9407be0 b5fff320 d4210000 17ffff97 (d4210000) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acregmax mount option User-provided mount parameter acregmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() Fix a NULL pointer crash that occurs when we are freeing the socket at the same time we access it via sysfs. The problem is that: 1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold() does a get on the "struct sock". 2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put on the "struct socket" and that does __sock_release() which sets the sock->ops to NULL. 3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then call kernel_getpeername() which accesses the NULL sock->ops. Above we do a get on the "struct sock", but we needed a get on the "struct socket". Originally, we just held the frwd_lock the entire time but in commit bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()") we switched to refcount based because the network layer changed and started taking a mutex in that path, so we could no longer hold the frwd_lock. Instead of trying to maintain multiple refcounts, this just has us use a mutex for accessing the socket in the interface code paths.

In the Linux kernel, the following vulnerability has been resolved: tty: xilinx_uartps: split sysrq handling lockdep detects the following circular locking dependency: CPU 0 CPU 1 ========================== ============================ cdns_uart_isr() printk() uart_port_lock(port) console_lock() cdns_uart_console_write() if (!port->sysrq) uart_port_lock(port) uart_handle_break() port->sysrq = ... uart_handle_sysrq_char() printk() console_lock() The fixed commit attempts to avoid this situation by only taking the port lock in cdns_uart_console_write if port->sysrq unset. However, if (as shown above) cdns_uart_console_write runs before port->sysrq is set, then it will try to take the port lock anyway. This may result in a deadlock. Fix this by splitting sysrq handling into two parts. We use the prepare helper under the port lock and defer handling until we release the lock.

In the Linux kernel, the following vulnerability has been resolved: tcp: drop secpath at the same time as we currently drop dst Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while running tests that boil down to: - create a pair of netns - run a basic TCP test over ipcomp6 - delete the pair of netns The xfrm_state found on spi_byaddr was not deleted at the time we delete the netns, because we still have a reference on it. This lingering reference comes from a secpath (which holds a ref on the xfrm_state), which is still attached to an skb. This skb is not leaked, it ends up on sk_receive_queue and then gets defer-free'd by skb_attempt_defer_free. The problem happens when we defer freeing an skb (push it on one CPU's defer_list), and don't flush that list before the netns is deleted. In that case, we still have a reference on the xfrm_state that we don't expect at this point. We already drop the skb's dst in the TCP receive path when it's no longer needed, so let's also drop the secpath. At this point, tcp_filter has already called into the LSM hooks that may require the secpath, so it should not be needed anymore. However, in some of those places, the MPTCP extension has just been attached to the skb, so we cannot simply drop all extensions.

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: net_sched: Prevent creation of classes with TC_H_ROOT The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination condition when traversing up the qdisc tree to update parent backlog counters. However, if a class is created with classid TC_H_ROOT, the traversal terminates prematurely at this class instead of reaching the actual root qdisc, causing parent statistics to be incorrectly maintained. In case of DRR, this could lead to a crash as reported by Mingi Cho. Prevent the creation of any Qdisc class with classid TC_H_ROOT (0xFFFFFFFF) across all qdisc types, as suggested by Jamal.

In the Linux kernel, the following vulnerability has been resolved: Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu" There are reports that the pagetable walker cache coherency is not a given across the spectrum of SDM845/850 devices, leading to lock-ups and resets. It works fine on some devices (like the Dragonboard 845c, but not so much on the Lenovo Yoga C630). This unfortunately looks like a fluke in firmware development, where likely somewhere in the vast hypervisor stack, a change to accommodate for this was only introduced after the initial software release (which often serves as a baseline for products). Revert the change to avoid additional guesswork around crashes. This reverts commit 6b31a9744b8726c69bb0af290f8475a368a4b805.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix extent range end unlock in cow_file_range() Running generic/751 on the for-next branch often results in a hang like below. They are both stack by locking an extent. This suggests someone forget to unlock an extent. INFO: task kworker/u128:1:12 blocked for more than 323 seconds. Not tainted 6.13.0-BTRFS-ZNS+ #503 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u128:1 state:D stack:0 pid:12 tgid:12 ppid:2 flags:0x00004000 Workqueue: btrfs-fixup btrfs_work_helper [btrfs] Call Trace: <TASK> __schedule+0x534/0xdd0 schedule+0x39/0x140 __lock_extent+0x31b/0x380 [btrfs] ? __pfx_autoremove_wake_function+0x10/0x10 btrfs_writepage_fixup_worker+0xf1/0x3a0 [btrfs] btrfs_work_helper+0xff/0x480 [btrfs] ? lock_release+0x178/0x2c0 process_one_work+0x1ee/0x570 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d1/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0x10b/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> INFO: task kworker/u134:0:184 blocked for more than 323 seconds. Not tainted 6.13.0-BTRFS-ZNS+ #503 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u134:0 state:D stack:0 pid:184 tgid:184 ppid:2 flags:0x00004000 Workqueue: writeback wb_workfn (flush-btrfs-4) Call Trace: <TASK> __schedule+0x534/0xdd0 schedule+0x39/0x140 __lock_extent+0x31b/0x380 [btrfs] ? __pfx_autoremove_wake_function+0x10/0x10 find_lock_delalloc_range+0xdb/0x260 [btrfs] writepage_delalloc+0x12f/0x500 [btrfs] ? srso_return_thunk+0x5/0x5f extent_write_cache_pages+0x232/0x840 [btrfs] btrfs_writepages+0x72/0x130 [btrfs] do_writepages+0xe7/0x260 ? srso_return_thunk+0x5/0x5f ? lock_acquire+0xd2/0x300 ? srso_return_thunk+0x5/0x5f ? find_held_lock+0x2b/0x80 ? wbc_attach_and_unlock_inode.part.0+0x102/0x250 ? wbc_attach_and_unlock_inode.part.0+0x102/0x250 __writeback_single_inode+0x5c/0x4b0 writeback_sb_inodes+0x22d/0x550 __writeback_inodes_wb+0x4c/0xe0 wb_writeback+0x2f6/0x3f0 wb_workfn+0x32a/0x510 process_one_work+0x1ee/0x570 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d1/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0x10b/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This happens because we have another success path for the zoned mode. When there is no active zone available, btrfs_reserve_extent() returns -EAGAIN. In this case, we have two reactions. (1) If the given range is never allocated, we can only wait for someone to finish a zone, so wait on BTRFS_FS_NEED_ZONE_FINISH bit and retry afterward. (2) Or, if some allocations are already done, we must bail out and let the caller to send IOs for the allocation. This is because these IOs may be necessary to finish a zone. The commit 06f364284794 ("btrfs: do proper folio cleanup when cow_file_range() failed") moved the unlock code from the inside of the loop to the outside. So, previously, the allocated extents are unlocked just after the allocation and so before returning from the function. However, they are no longer unlocked on the case (2) above. That caused the hang issue. Fix the issue by modifying the 'end' to the end of the allocated range. Then, we can exit the loop and the same unlock code can properly handle the case.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases If the XDP program doesn't result in XDP_PASS then we leak the memory allocated by am65_cpsw_build_skb(). It is pointless to allocate SKB memory before running the XDP program as we would be wasting CPU cycles for cases other than XDP_PASS. Move the SKB allocation after evaluating the XDP program result. This fixes the memleak. A performance boost is seen for XDP_DROP test. XDP_DROP test: Before: 460256 rx/s 0 err/s After: 784130 rx/s 0 err/s

In the Linux kernel, the following vulnerability has been resolved: net: mctp: unshare packets when reassembling Ensure that the frag_list used for reassembly isn't shared with other packets. This avoids incorrect reassembly when packets are cloned, and prevents a memory leak due to circular references between fragments and their skb_shared_info. The upcoming MCTP-over-USB driver uses skb_clone which can trigger the problem - other MCTP drivers don't share SKBs. A kunit test is added to reproduce the issue.

In the Linux kernel, the following vulnerability has been resolved: spufs: fix a leak in spufs_create_context() Leak fixes back in 2008 missed one case - if we are trying to set affinity and spufs_mkdir() fails, we need to drop the reference to neighbor.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a deadlock when recovering state on a sillyrenamed file If the file is sillyrenamed, and slated for delete on close, it is possible for a server reboot to triggeer an open reclaim, with can again race with the application call to close(). When that happens, the call to put_nfs_open_context() can trigger a synchronous delegreturn call which deadlocks because it is not marked as privileged. Instead, ensure that the call to nfs4_inode_return_delegation_on_close() catches the delegreturn, and schedules it asynchronously.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Fix class @block_class's subsystem refcount leakage blkcg_fill_root_iostats() iterates over @block_class's devices by class_dev_iter_(init|next)(), but does not end iterating with class_dev_iter_exit(), so causes the class's subsystem refcount leakage. Fix by ending the iterating with class_dev_iter_exit().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface() The documentation for usb_driver_claim_interface() says that "the device lock" is needed when the function is called from places other than probe(). This appears to be the lock for the USB interface device. The Mediatek btusb code gets called via this path: Workqueue: hci0 hci_power_on [bluetooth] Call trace: usb_driver_claim_interface btusb_mtk_claim_iso_intf btusb_mtk_setup hci_dev_open_sync hci_power_on process_scheduled_works worker_thread kthread With the above call trace the device lock hasn't been claimed. Claim it. Without this fix, we'd sometimes see the error "Failed to claim iso interface". Sometimes we'd even see worse errors, like a NULL pointer dereference (where `intf->dev.driver` was NULL) with a trace like: Call trace: usb_suspend_both usb_runtime_suspend __rpm_callback rpm_suspend pm_runtime_work process_scheduled_works Both errors appear to be fixed with the proper locking.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix bug on trap in smb2_lock If lock count is greater than 1, flags could be old value. It should be checked with flags of smb_lock, not flags. It will cause bug-on trap from locks_free_lock in error handling routine.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: handle errors in mlx5_chains_create_table() In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns() and mlx5_get_flow_namespace() must be checked to prevent NULL pointer dereferences. If either function fails, the function should log error message with mlx5_core_warn() and return error pointer.

In the Linux kernel, the following vulnerability has been resolved: net: decrease cached dst counters in dst_release Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") moved decrementing the dst count from dst_destroy to dst_release to avoid accessing already freed data in case of netns dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels are used, this fix is incomplete as the same issue will be seen for cached dsts: Unable to handle kernel paging request at virtual address ffff5aabf6b5c000 Call trace: percpu_counter_add_batch+0x3c/0x160 (P) dst_release+0xec/0x108 dst_cache_destroy+0x68/0xd8 dst_destroy+0x13c/0x168 dst_destroy_rcu+0x1c/0xb0 rcu_do_batch+0x18c/0x7d0 rcu_core+0x174/0x378 rcu_core_si+0x18/0x30 Fix this by invalidating the cache, and thus decrementing cached dst counters, in dst_release too.

In the Linux kernel, the following vulnerability has been resolved: mm: memory-failure: update ttu flag inside unmap_poisoned_folio Patch series "mm: memory_failure: unmap poisoned folio during migrate properly", v3. Fix two bugs during folio migration if the folio is poisoned. This patch (of 3): Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in order to stop send SIGBUS signal when accessing an error page after a memory error on a clean folio. However during page migration, anon folio must be set with TTU_HWPOISON during unmap_*(). For pagecache we need some policy just like the one in hwpoison_user_mappings to set this flag. So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to handle this warning properly. Warning will be produced during unamp poison folio with the following log: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c Modules linked in: CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0x8fc/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0x8fc/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- [mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe]

In the Linux kernel, the following vulnerability has been resolved: nfsd: put dl_stid if fail to queue dl_recall Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we increment the reference count of dl_stid. We expect that after the corresponding work_struct is processed, the reference count of dl_stid will be decremented through the callback function nfsd4_cb_recall_release. However, if the call to nfsd4_run_cb fails, the incremented reference count of dl_stid will not be decremented correspondingly, leading to the following nfs4_stid leak: unreferenced object 0xffff88812067b578 (size 344): comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........ 00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N.. backtrace: kmem_cache_alloc+0x4b9/0x700 nfsd4_process_open1+0x34/0x300 nfsd4_open+0x2d1/0x9d0 nfsd4_proc_compound+0x7a2/0xe30 nfsd_dispatch+0x241/0x3e0 svc_process_common+0x5d3/0xcc0 svc_process+0x2a3/0x320 nfsd+0x180/0x2e0 kthread+0x199/0x1d0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 unreferenced object 0xffff8881499f4d28 (size 368): comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I.... 30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... ....... backtrace: kmem_cache_alloc+0x4b9/0x700 nfs4_alloc_stid+0x29/0x210 alloc_init_deleg+0x92/0x2e0 nfs4_set_delegation+0x284/0xc00 nfs4_open_delegation+0x216/0x3f0 nfsd4_process_open2+0x2b3/0xee0 nfsd4_open+0x770/0x9d0 nfsd4_proc_compound+0x7a2/0xe30 nfsd_dispatch+0x241/0x3e0 svc_process_common+0x5d3/0xcc0 svc_process+0x2a3/0x320 nfsd+0x180/0x2e0 kthread+0x199/0x1d0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if fail to queue dl_recall.

In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure shadow stack is active before "getting" registers The x86 shadow stack support has its own set of registers. Those registers are XSAVE-managed, but they are "supervisor state components" which means that userspace can not touch them with XSAVE/XRSTOR. It also means that they are not accessible from the existing ptrace ABI for XSAVE state. Thus, there is a new ptrace get/set interface for it. The regset code that ptrace uses provides an ->active() handler in addition to the get/set ones. For shadow stack this ->active() handler verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the thread struct. The ->active() handler is checked from some call sites of the regset get/set handlers, but not the ptrace ones. This was not understood when shadow stack support was put in place. As a result, both the set/get handlers can be called with XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an ssp_active() check to avoid surprising the kernel with shadow stack behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That check just happened to avoid the warning. But the ->get() side wasn't so lucky. It can be called with shadow stacks disabled, triggering the warning in practice, as reported by Christina Schimpe: WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0 [...] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? ssp_get+0x89/0xa0 ? __warn+0x91/0x150 ? ssp_get+0x89/0xa0 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? __pfx_ssp_get+0x10/0x10 ? ssp_get+0x89/0xa0 ? ssp_get+0x52/0xa0 __regset_get+0xad/0xf0 copy_regset_to_user+0x52/0xc0 ptrace_regset+0x119/0x140 ptrace_request+0x13c/0x850 ? wait_task_inactive+0x142/0x1d0 ? do_syscall_64+0x6d/0x90 arch_ptrace+0x102/0x300 [...] Ensure that shadow stacks are active in a thread before looking them up in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are set at the same time, the active check ensures that there will be something to find in the XSAVE buffer. [ dhansen: changelog/subject tweaks ]

In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix off-by-one root mis-connection Before attaching a new root to the old root, the children counter of the new root is checked to verify that only the upcoming CPU's top group have been connected to it. However since the recently added commit b729cc1ec21a ("timers/migration: Fix another race between hotplug and idle entry/exit") this check is not valid anymore because the old root is pre-accounted as a child to the new root. Therefore after connecting the upcoming CPU's top group to the new root, the children count to be expected must be 2 and not 1 anymore. This omission results in the old root to not be connected to the new root. Then eventually the system may run with more than one top level, which defeats the purpose of a single idle migrator. Also the old root is pre-accounted but not connected upon the new root creation. But it can be connected to the new root later on. Therefore the old root may be accounted twice to the new root. The propagation of such overcommit can end up creating a double final top-level root with a groupmask incorrectly initialized. Although harmless given that the final top level roots will never have a parent to walk up to, this oddity opportunistically reported the core issue: WARNING: CPU: 8 PID: 0 at kernel/time/timer_migration.c:543 tmigr_requires_handle_remote CPU: 8 UID: 0 PID: 0 Comm: swapper/8 RIP: 0010:tmigr_requires_handle_remote Call Trace: <IRQ> ? tmigr_requires_handle_remote ? hrtimer_run_queues update_process_times tick_periodic tick_handle_periodic __sysvec_apic_timer_interrupt sysvec_apic_timer_interrupt </IRQ> Fix the problem by taking the old root into account in the children count of the new root so the connection is not omitted. Also warn when more than one top level group exists to better detect similar issues in the future.

In the Linux kernel, the following vulnerability has been resolved: block: don't revert iter for -EIOCBQUEUED blkdev_read_iter() has a few odd checks, like gating the position and count adjustment on whether or not the result is bigger-than-or-equal to zero (where bigger than makes more sense), and not checking the return value of blkdev_direct_IO() before doing an iov_iter_revert(). The latter can lead to attempting to revert with a negative value, which when passed to iov_iter_revert() as an unsigned value will lead to throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT. Be sane and don't revert for -EIOCBQUEUED, like what is done in other spots.

In the Linux kernel, the following vulnerability has been resolved: efi: Don't map the entire mokvar table to determine its size Currently, when validating the mokvar table, we (re)map the entire table on each iteration of the loop, adding space as we discover new entries. If the table grows over a certain size, this fails due to limitations of early_memmap(), and we get a failure and traceback: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220 ... Call Trace: <TASK> ? __early_ioremap+0xef/0x220 ? __warn.cold+0x93/0xfa ? __early_ioremap+0xef/0x220 ? report_bug+0xff/0x140 ? early_fixup_exception+0x5d/0xb0 ? early_idt_handler_common+0x2f/0x3a ? __early_ioremap+0xef/0x220 ? efi_mokvar_table_init+0xce/0x1d0 ? setup_arch+0x864/0xc10 ? start_kernel+0x6b/0xa10 ? x86_64_start_reservations+0x24/0x30 ? x86_64_start_kernel+0xed/0xf0 ? common_startup_64+0x13e/0x141 </TASK> ---[ end trace 0000000000000000 ]--- mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187. Mapping the entire structure isn't actually necessary, as we don't ever need more than one entry header mapped at once. Changes efi_mokvar_table_init() to only map each entry header, not the entire table, when determining the table size. Since we're not mapping any data past the variable name, it also changes the code to enforce that each variable name is NUL terminated, rather than attempting to verify it in place.

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.

In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set() Instead of attempting the same mutex twice, lock and unlock it. This bug has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: devlink: fix xa_alloc_cyclic() error handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (rel). Fix it by checking if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix corrupted packets for XDP_SHARED_UMEM Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where packets are corrupted for the second and any further sockets bound to the same umem. In other words, this does not affect the first socket bound to the umem. The culprit for this bug is that the initialization of the DMA addresses for the pre-populated xsk buffer pool entries was not performed for any socket but the first one bound to the umem. Only the linear array of DMA addresses was populated. Fix this by populating the DMA addresses in the xsk buffer pool for every socket bound to the same umem.

In the Linux kernel, the following vulnerability has been resolved: dpll: fix xa_alloc_cyclic() error handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (pin). Fix it by checking if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix missing shutdown check xfstests generic/730 test failed because after deleting the device that still had dirty data, the file could still be read without returning an error. The reason is the missing shutdown check in ->read_iter. I also noticed that shutdown checks were missing from ->write_iter, ->splice_read, and ->mmap. This commit adds shutdown checks to all of them.

In the Linux kernel, the following vulnerability has been resolved: gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl(). Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: clone zoned device info when cloning a device When cloning a btrfs_device, we're not cloning the associated btrfs_zoned_device_info structure of the device in case of a zoned filesystem. Later on this leads to a NULL pointer dereference when accessing the device's zone_info for instance when setting a zone as active. This was uncovered by fstests' testcase btrfs/161.

In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove().

In the Linux kernel, the following vulnerability has been resolved: powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC Erhard reported the following KASAN hit while booting his PowerMac G4 with a KASAN-enabled kernel 6.13-rc6: BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8 Write of size 8 at addr f1000000 by task chronyd/1293 CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2 Tainted: [W]=WARN Hardware name: PowerMac3,6 7455 0x80010303 PowerMac Call Trace: [c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable) [c24375b0] [c0504998] print_report+0xdc/0x504 [c2437610] [c050475c] kasan_report+0xf8/0x108 [c2437690] [c0505a3c] kasan_check_range+0x24/0x18c [c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8 [c24376c0] [c004c014] patch_instructions+0x15c/0x16c [c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c [c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac [c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec [c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478 [c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14 [c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4 [c24379d0] [c027111c] do_seccomp+0x3dc/0x1890 [c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420 [c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c --- interrupt: c00 at 0x5a1274 NIP: 005a1274 LR: 006a3b3c CTR: 005296c8 REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4) MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000 GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932 GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57 GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002 GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001 NIP [005a1274] 0x5a1274 LR [006a3b3c] 0x6a3b3c --- interrupt: c00 The buggy address belongs to the virtual mapping at [f1000000, f1002000) created by: text_area_cpu_up+0x20/0x190 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30 flags: 0x80000000(zone=2) raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001 raw: 00000000 page dumped because: kasan: bad access detected Memory state around the buggy address: f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not initialised hence not supposed to be used yet. Powerpc text patching infrastructure allocates a virtual memory area using get_vm_area() and flags it as VM_ALLOC. But that flag is meant to be used for vmalloc() and vmalloc() allocated memory is not supposed to be used before a call to __vmalloc_node_range() which is never called for that area. That went undetected until commit e4137f08816b ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") The area allocated by text_area_cpu_up() is not vmalloc memory, it is mapped directly on demand when needed by map_kernel_page(). There is no VM flag corresponding to such usage, so just pass no flag. That way the area will be unpoisonned and usable immediately.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Don't override subprog's return value The verifier test `calls: div by 0 in subprog` triggers a panic at the ld.bu instruction. The ld.bu insn is trying to load byte from memory address returned by the subprog. The subprog actually set the correct address at the a5 register (dedicated register for BPF return values). But at commit 73c359d1d356 ("LoongArch: BPF: Sign-extend return values") we also sign extended a5 to the a0 register (return value in LoongArch). For function call insn, we later propagate the a0 register back to a5 register. This is right for native calls but wrong for bpf2bpf calls which expect zero-extended return value in a5 register. So only move a0 to a5 for native calls (i.e. non-BPF_PSEUDO_CALL).