In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Add some bounds checking to firmware data Smatch complains about "head->full_size - head->header_size" can underflow. To some extent, we're always going to have to trust the firmware a bit. However, it's easy enough to add a check for negatives, and let's add a upper bounds check as well.

An issue was discovered in EMC ScaleIO 2.0.1.x. In a Linux environment, one of the support scripts saves the credentials of the ScaleIO MDM user who executed the script in clear text in temporary log files. The temporary files may potentially be read by an unprivileged user with access to the server where the script was executed to recover exposed credentials.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix potential memleak in cppc_cpufreq_cpu_init It's a classic example of memleak, we allocate something, we fail and never free the resources. Make sure we free all resources on policy ->init() failures.

The perf_swevent_init function in kernel/events/core.c in the Linux kernel before 3.8.9 uses an incorrect integer data type, which allows local users to gain privileges via a crafted perf_event_open system call.

In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix list corruption from reorder of WRITE ->lqueued __blkcg_rstat_flush() can be run anytime, especially when blk_cgroup_bio_start is being executed. If WRITE of `->lqueued` is re-ordered with READ of 'bisc->lnode.next' in the loop of __blkcg_rstat_flush(), `next_bisc` can be assigned with one stat instance being added in blk_cgroup_bio_start(), then the local list in __blkcg_rstat_flush() could be corrupted. Fix the issue by adding one barrier.

In the Linux kernel, the following vulnerability has been resolved: smb: client: guarantee refcounted children from parent session Avoid potential use-after-free bugs when walking DFS referrals, mounting and performing DFS failover by ensuring that all children from parent @tcon->ses are also refcounted. They're all needed across the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at it, too.

In the Linux kernel, the following vulnerability has been resolved: bcachefs: Check for journal entries overruning end of sb clean section Fix a missing bounds check in superblock validation. Note that we don't yet have repair code for this case - repair code for individual items is generally low priority, since the whole superblock is checksummed, validated prior to write, and we have backups.

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix nr_cpus < nr_iaa case If nr_cpus < nr_iaa, the calculated cpus_per_iaa will be 0, which causes a divide-by-0 in rebalance_wq_table(). Make sure cpus_per_iaa is 1 in that case, and also in the nr_iaa == 0 case, even though cpus_per_iaa is never used if nr_iaa == 0, for paranoia.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab out of bounds write in smb_inherit_dacl() slab out-of-bounds write is caused by that offsets is bigger than pntsd allocation size. This patch add the check to validate 3 offsets using allocation size.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add check for negative db_l2nbperpage l2nbperpage is log2(number of blks per page), and the minimum legal value should be 0, not negative. In the case of l2nbperpage being negative, an error will occur when subsequently used as shift exponent. Syzbot reported this bug: UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12 shift exponent -16777216 is negative

In the Linux kernel, the following vulnerability has been resolved: sh: push-switch: Reorder cleanup operations to avoid use-after-free bug The original code puts flush_work() before timer_shutdown_sync() in switch_drv_remove(). Although we use flush_work() to stop the worker, it could be rescheduled in switch_timer(). As a result, a use-after-free bug can occur. The details are shown below: (cpu 0) | (cpu 1) switch_drv_remove() | flush_work() | ... | switch_timer // timer | schedule_work(&psw->work) timer_shutdown_sync() | ... | switch_work_handler // worker kfree(psw) // free | | psw->state = 0 // use This patch puts timer_shutdown_sync() before flush_work() to mitigate the bugs. As a result, the worker and timer will be stopped safely before the deallocate operations.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 db2set is vulnerable to a buffer overflow, caused by improper bounds checking. An attacker could overflow the buffer and execute arbitrary code. IBM X-Force ID: 252184.

In the hidp_process_report in bluetooth, there is an integer overflow. This could lead to an out of bounds write with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android kernel Android ID: A-65853588 References: Upstream kernel.

In the Linux kernel, the following vulnerability has been resolved: phylib: fix potential use-after-free Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device().

IBM Spectrum Scale Container Native Storage Access 5.1.2.1 through 5.1.6.0 contains an unspecified vulnerability that could allow a local user to obtain root privileges. IBM X-Force ID: 237810.

NuProcess is an external process execution implementation for Java. In all the versions of NuProcess where it forks processes by using the JVM's Java_java_lang_UNIXProcess_forkAndExec method (1.2.0+), attackers can use NUL characters in their strings to perform command line injection. Java's ProcessBuilder isn't vulnerable because of a check in ProcessBuilder.start. NuProcess is missing that check. This vulnerability can only be exploited to inject command line arguments on Linux. Version 2.0.5 contains a patch. As a workaround, users of the library can sanitize command strings to remove NUL characters prior to passing them to NuProcess for execution.

IBM Security Guardium 11.3 could allow a local user to escalate their privileges due to improper permission controls. IBM X-Force ID: 240908.

IBM InfoSphere Information Server 11.7 could allow a local user to execute privileged commands due to the improper handling of permissions.

In the Linux kernel, the following vulnerability has been resolved: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Avoid potential use after free in MHI send It is possible that the MHI ul_callback will be invoked immediately following the queueing of the skb for transmission, leading to the callback decrementing the refcount of the associated sk and freeing the skb. As such the dereference of skb and the increment of the sk refcount must happen before the skb is queued, to avoid the skb to be used after free and potentially the sk to drop its last refcount..

A heap-based buffer overflow flaw was found in the way the legacy_parse_param function in the Filesystem Context functionality of the Linux kernel verified the supplied parameters length. An unprivileged (in case of unprivileged user namespaces enabled, otherwise needs namespaced CAP_SYS_ADMIN privilege) local user able to open a filesystem that does not support the Filesystem Context API (and thus fallbacks to legacy handling) could use this flaw to escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix Use-after-Free, hold skb ref while in use This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode().

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix buffer overflow when parsing NFS reparse points ReparseDataLength is sum of the InodeType size and DataBuffer size. So to get DataBuffer size it is needed to subtract InodeType's size from ReparseDataLength. Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer at position after the end of the buffer because it does not subtract InodeType size from the length. Fix this problem and correctly subtract variable len. Member InodeType is present only when reparse buffer is large enough. Check for ReparseDataLength before accessing InodeType to prevent another invalid memory access. Major and minor rdev values are present also only when reparse buffer is large enough. Check for reparse buffer size before calling reparse_mkdev().

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read() Avoid a possible buffer overflow if size is larger than 4K. (cherry picked from commit f5d873f5825b40d886d03bd2aede91d4cf002434)

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix READDIR buffer overflow If a client sends a READDIR count argument that is too small (say, zero), then the buffer size calculation in the new init_dirlist helper functions results in an underflow, allowing the XDR stream functions to write beyond the actual buffer. This calculation has always been suspect. NFSD has never sanity- checked the READDIR count argument, but the old entry encoders managed the problem correctly. With the commits below, entry encoding changed, exposing the underflow to the pointer arithmetic in xdr_reserve_space(). Modern NFS clients attempt to retrieve as much data as possible for each READDIR request. Also, we have no unit tests that exercise the behavior of READDIR at the lower bound of @count values. Thus this case was missed during testing.

An elevation of privilege vulnerability in the Qualcomm Wi-Fi driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High because it first requires compromising a privileged process. Product: Android. Versions: Kernel-3.10, Kernel-3.18. Android ID: A-32872662. References: QC-CR#1095009.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-Force ID: 155892.

IBM DB2 High Performance Unload load for LUW 6.1 and 6.5 is vulnerable to a buffer overflow, caused by improper bounds checking which could allow a local attacker to execute arbitrary code on the system with root privileges. IBM X-Force ID: 165481.

drivers/net/ethernet/xilinx/ll_temac_main.c in the Linux kernel before 5.12.13 allows remote attackers to cause a denial of service (buffer overflow and lockup) by sending heavy network traffic for about ten minutes.

The dvd_read_bca function in the DVD handling code in drivers/cdrom/cdrom.c in Linux kernel 2.2.16, and later versions, assigns the wrong value to a length variable, which allows local users to execute arbitrary code via a crafted USB Storage device that triggers a buffer overflow.

In drivers/char/virtio_console.c in the Linux kernel before 5.13.4, data corruption or loss can be triggered by an untrusted device that supplies a buf->len value exceeding the buffer size. NOTE: the vendor indicates that the cited data corruption is not a vulnerability in any existing use case; the length validation was added solely for robustness in the face of anomalous host OS behavior

In the Linux kernel, the following vulnerability has been resolved: kdb: Fix buffer overflow during tab-complete Currently, when the user attempts symbol completion with the Tab key, kdb will use strncpy() to insert the completed symbol into the command buffer. Unfortunately it passes the size of the source buffer rather than the destination to strncpy() with predictably horrible results. Most obviously if the command buffer is already full but cp, the cursor position, is in the middle of the buffer, then we will write past the end of the supplied buffer. Fix this by replacing the dubious strncpy() calls with memmove()/memcpy() calls plus explicit boundary checks to make sure we have enough space before we start moving characters around.

An issue was discovered in ACRN before 2.5. dmar_free_irte in hypervisor/arch/x86/vtd.c allows an irte_alloc_bitmap buffer overflow.

In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char).

A buffer overflow vulnerability was discovered in Zoom Client for Meetings (for Android, iOS, Linux, macOS, and Windows) before version 5.8.4, Zoom Client for Meetings for Blackberry (for Android and iOS) before version 5.8.1, Zoom Client for Meetings for intune (for Android and iOS) before version 5.8.4, Zoom Client for Meetings for Chrome OS before version 5.0.1, Zoom Rooms for Conference Room (for Android, AndroidBali, macOS, and Windows) before version 5.8.3, Controllers for Zoom Rooms (for Android, iOS, and Windows) before version 5.8.3, Zoom VDI Windows Meeting Client before version 5.8.4, Zoom VDI Azure Virtual Desktop Plugins (for Windows x86 or x64, IGEL x64, Ubuntu x64, HP ThinPro OS x64) before version 5.8.4.21112, Zoom VDI Citrix Plugins (for Windows x86 or x64, Mac Universal Installer & Uninstaller, IGEL x64, eLux RP6 x64, HP ThinPro OS x64, Ubuntu x64, CentOS x 64, Dell ThinOS) before version 5.8.4.21112, Zoom VDI VMware Plugins (for Windows x86 or x64, Mac Universal Installer & Uninstaller, IGEL x64, eLux RP6 x64, HP ThinPro OS x64, Ubuntu x64, CentOS x 64, Dell ThinOS) before version 5.8.4.21112, Zoom Meeting SDK for Android before version 5.7.6.1922, Zoom Meeting SDK for iOS before version 5.7.6.1082, Zoom Meeting SDK for macOS before version 5.7.6.1340, Zoom Meeting SDK for Windows before version 5.7.6.1081, Zoom Video SDK (for Android, iOS, macOS, and Windows) before version 1.1.2, Zoom On-Premise Meeting Connector Controller before version 4.8.12.20211115, Zoom On-Premise Meeting Connector MMR before version 4.8.12.20211115, Zoom On-Premise Recording Connector before version 5.1.0.65.20211116, Zoom On-Premise Virtual Room Connector before version 4.4.7266.20211117, Zoom On-Premise Virtual Room Connector Load Balancer before version 2.5.5692.20211117, Zoom Hybrid Zproxy before version 1.0.1058.20211116, and Zoom Hybrid MMR before version 4.6.20211116.131_x86-64. This can potentially allow a malicious actor to crash the service or application, or leverage this vulnerability to execute arbitrary code.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-ForceID: 155894.

In the Linux kernel, the following vulnerability has been resolved: vt: fix unicode buffer corruption when deleting characters This is the same issue that was fixed for the VGA text buffer in commit 39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the buffer"). The cure is also the same i.e. replace memcpy() with memmove() due to the overlaping buffers.

An elevation of privilege vulnerability in the Qualcomm Wi-Fi driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High because it first requires compromising a privileged process. Product: Android. Versions: Kernel-3.10, Kernel-3.18. Android ID: A-32402604. References: QC-CR#1092497.

An elevation of privilege vulnerability in the NVIDIA crypto driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High because it first requires compromising a privileged process. Product: Android. Versions: Kernel 3.10. Android ID: A-33893669. References: N-CVE-2017-0327.

An issue was discovered in the Linux kernel through 5.11.8. The sound/soc/qcom/sdm845.c soundwire device driver has a buffer overflow when an unexpected port ID number is encountered, aka CID-1c668e1c0a0f. (This has been fixed in 5.12-rc4.)

Buffer overflow in the clusterip_proc_write function in net/ipv4/netfilter/ipt_CLUSTERIP.c in the Linux kernel before 2.6.39 might allow local users to cause a denial of service or have unspecified other impact via a crafted write operation, related to string data that lacks a terminating '\0' character.

In drivers/pci/hotplug/rpadlpar_sysfs.c in the Linux kernel through 5.11.8, the RPA PCI Hotplug driver has a user-tolerable buffer overflow when writing a new device name to the driver from userspace, allowing userspace to write data to the kernel stack frame directly. This occurs because add_slot_store and remove_slot_store mishandle drc_name '\0' termination, aka CID-cc7a0bb058b8.

Multiple buffer overflows in the si4713_write_econtrol_string function in drivers/media/radio/si4713-i2c.c in the Linux kernel before 2.6.39.4 on the N900 platform might allow local users to cause a denial of service or have unspecified other impact via a crafted s_ext_ctrls operation with a (1) V4L2_CID_RDS_TX_PS_NAME or (2) V4L2_CID_RDS_TX_RADIO_TEXT control ID.

Multiple buffer overflows in the caiaq Native Instruments USB audio functionality in the Linux kernel before 2.6.38-rc4-next-20110215 might allow attackers to cause a denial of service or possibly have unspecified other impact via a long USB device name, related to (1) the snd_usb_caiaq_audio_init function in sound/usb/caiaq/audio.c and (2) the snd_usb_caiaq_midi_init function in sound/usb/caiaq/midi.c.

Buffer overflow in the mac_partition function in fs/partitions/mac.c in the Linux kernel before 2.6.37.2 allows local users to cause a denial of service (panic) or possibly have unspecified other impact via a malformed Mac OS partition table.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-ForceID: 155893.