IBM Security Guardium 11.3, 11.4, and 11.5 could allow a local user to obtain elevated privileges due to incorrect authorization checks. IBM X-Force ID: 216753.

A flaw was discovered in gfs2 file system’s handling of acls (access control lists). An unprivileged local attacker could exploit this flaw to gain access or execute any file stored in the gfs2 file system.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] r ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() 1. The size of the response packet is not validated. 2. The response buffer is not freed. Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer.

The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID.

Improper initialization in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated user to potentially enable escalation of privilege via local access.

In the Linux kernel, the following vulnerability has been resolved: media: s5p-jpeg: prevent buffer overflows The current logic allows word to be less than 2. If this happens, there will be buffer overflows, as reported by smatch. Add extra checks to prevent it. While here, remove an unused word = 0 assignment.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier() The scmi_dev->name is released prematurely in __scmi_device_destroy(), which causes slab-use-after-free when accessing scmi_dev->name in scmi_bus_notifier(). So move the release of scmi_dev->name to scmi_device_release() to avoid slab-use-after-free. | BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec | Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1 | | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1 | Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT) | Call trace: | dump_backtrace+0x94/0x114 | show_stack+0x18/0x24 | dump_stack_lvl+0x48/0x60 | print_report+0xf4/0x5b0 | kasan_report+0xa4/0xec | __asan_report_load1_noabort+0x20/0x2c | strncmp+0xe4/0xec | scmi_bus_notifier+0x5c/0x54c | notifier_call_chain+0xb4/0x31c | blocking_notifier_call_chain+0x68/0x9c | bus_notify+0x54/0x78 | device_del+0x1bc/0x840 | device_unregister+0x20/0xb4 | __scmi_device_destroy+0xac/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Allocated by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_alloc_info+0x24/0x34 | __kasan_kmalloc+0xa0/0xb8 | __kmalloc_node_track_caller+0x6c/0x104 | kstrdup+0x48/0x84 | kstrdup_const+0x34/0x40 | __scmi_device_create.part.0+0x8c/0x408 | scmi_device_create+0x104/0x370 | scmi_chan_setup+0x2a0/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Freed by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_free_info+0x38/0x5c | __kasan_slab_free+0xe8/0x164 | __kmem_cache_free+0x11c/0x230 | kfree+0x70/0x130 | kfree_const+0x20/0x40 | __scmi_device_destroy+0x70/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---

arch/powerpc/kvm/book3s_rtas.c in the Linux kernel through 5.13.5 on the powerpc platform allows KVM guest OS users to cause host OS memory corruption via rtas_args.nargs, aka CID-f62f3c20647e.

A flaw was found in the Linux kernel. A use-after-free vulnerability in the NFC stack can lead to a threat to confidentiality, integrity, and system availability.

prealloc_elems_and_freelist in kernel/bpf/stackmap.c in the Linux kernel before 5.14.12 allows unprivileged users to trigger an eBPF multiplication integer overflow with a resultant out-of-bounds write.

A flaw was found in the fixed buffer registration code for io_uring (io_sqe_buffer_register in io_uring/rsrc.c) in the Linux kernel that allows out-of-bounds access to physical memory beyond the end of the buffer. This flaw enables full local privilege escalation.

An unauthorized access to the execution of the setuid file with capabilities flaw in the Linux kernel OverlayFS subsystem was found in the way user copying a capable file from a nosuid mount into another mount. A local user could use this flaw to escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: Skip non-Ethernet packets Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets.

In kernel/bpf/hashtab.c in the Linux kernel through 5.13.8, there is an integer overflow and out-of-bounds write when many elements are placed in a single bucket. NOTE: exploitation might be impractical without the CAP_SYS_ADMIN capability.

In the Linux kernel, the following vulnerability has been resolved: drm/tests: helpers: Avoid a driver uaf when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x7 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: HID: bpf: prevent buffer overflow in hid_hw_request right now the returned value is considered to be always valid. However, when playing with HID-BPF, the return value can be arbitrary big, because it's the return value of dispatch_hid_bpf_raw_requests(), which calls the struct_ops and we have no guarantees that the value makes sense.

In the Linux kernel, the following vulnerability has been resolved: bpf: Properly mark live registers for indirect jumps For a `gotox rX` instruction the rX register should be marked as used in the compute_insn_live_regs() function. Fix this.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential overflow of shmem scatterlist length When a scatterlists table of a GEM shmem object of size 4 GB or more is populated with pages allocated from a folio, unsigned int .length attribute of a scatterlist may get overflowed if total byte length of pages allocated to that single scatterlist happens to reach or cross the 4GB limit. As a consequence, users of the object may suffer from hitting unexpected, premature end of the object's backing pages. [278.780187] ------------[ cut here ]------------ [278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915] ... [278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary) [278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 [278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915] ... [278.780786] Call Trace: [278.780787] <TASK> [278.780788] ? __apply_to_page_range+0x3e6/0x910 [278.780795] ? __pfx_remap_sg+0x10/0x10 [i915] [278.780906] apply_to_page_range+0x14/0x30 [278.780908] remap_io_sg+0x14d/0x260 [i915] [278.781013] vm_fault_cpu+0xd2/0x330 [i915] [278.781137] __do_fault+0x3a/0x1b0 [278.781140] do_fault+0x322/0x640 [278.781143] __handle_mm_fault+0x938/0xfd0 [278.781150] handle_mm_fault+0x12c/0x300 [278.781152] ? lock_mm_and_find_vma+0x4b/0x760 [278.781155] do_user_addr_fault+0x2d6/0x8e0 [278.781160] exc_page_fault+0x96/0x2c0 [278.781165] asm_exc_page_fault+0x27/0x30 ... That issue was apprehended by the author of a change that introduced it, and potential risk even annotated with a comment, but then never addressed. When adding folio pages to a scatterlist table, take care of byte length of any single scatterlist not exceeding max_segment. (cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60)

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103 CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697 __ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573 ext4_lookup_entry fs/ext4/namei.c:1727 [inline] ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795 lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633 filename_create+0x297/0x540 fs/namei.c:3980 do_symlinkat+0xf9/0x3a0 fs/namei.c:4587 __do_sys_symlinkat fs/namei.c:4610 [inline] __se_sys_symlinkat fs/namei.c:4607 [inline] __x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3e73ced469 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469 RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0 RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290 R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0 </TASK> Calling ext4_xattr_ibody_find right after reading the inode with ext4_get_inode_loc will lead to a check of the validity of the xattrs, avoiding this problem.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: adxl380: Avoid reading more entries than present in FIFO The interrupt handler reads FIFO entries in batches of N samples, where N is the number of scan elements that have been enabled. However, the sensor fills the FIFO one sample at a time, even when more than one channel is enabled. Therefore,the number of entries reported by the FIFO status registers may not be a multiple of N; if this number is not a multiple, the number of entries read from the FIFO may exceed the number of entries actually present. To fix the above issue, round down the number of FIFO entries read from the status registers so that it is always a multiple of N.

In the Linux kernel, the following vulnerability has been resolved: mm: use aligned address in clear_gigantic_page() In current kernel, hugetlb_no_page() calls folio_zero_user() with the fault address. Where the fault address may be not aligned with the huge page size. Then, folio_zero_user() may call clear_gigantic_page() with the address, while clear_gigantic_page() requires the address to be huge page size aligned. So, this may cause memory corruption or information leak, addtional, use more obvious naming 'addr_hint' instead of 'addr' for clear_gigantic_page().

In the Linux kernel, the following vulnerability has been resolved: PCI: hv: Fix double ida_free in hv_pci_probe error path If hv_pci_probe() fails after storing the domain number in hbus->bridge->domain_nr, there is a call to free this domain_nr via pci_bus_release_emul_domain_nr(), however, during cleanup, the bridge release callback pci_release_host_bridge_dev() also frees the domain_nr causing ida_free to be called on same ID twice and triggering following warning: ida_free called for id=28971 which is not allocated. WARNING: lib/idr.c:594 at ida_free+0xdf/0x160, CPU#0: kworker/0:2/198 Call Trace: pci_bus_release_emul_domain_nr+0x17/0x20 pci_release_host_bridge_dev+0x4b/0x60 device_release+0x3b/0xa0 kobject_put+0x8e/0x220 devm_pci_alloc_host_bridge_release+0xe/0x20 devres_release_all+0x9a/0xd0 device_unbind_cleanup+0x12/0xa0 really_probe+0x1c5/0x3f0 vmbus_add_channel_work+0x135/0x1a0 Fix this by letting pci core handle the free domain_nr and remove the explicit free called in pci-hyperv driver.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix error handling in probe function Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent resource leak. Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

In the Linux kernel, the following vulnerability has been resolved: reset: gpio: suppress bind attributes in sysfs This is a special device that's created dynamically and is supposed to stay in memory forever. We also currently don't have a devlink between it and the actual reset consumer. Suppress sysfs bind attributes so that user-space can't unbind the device because - as of now - it will cause a use-after-free splat from any user that puts the reset control handle.

In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix double dma_buf_unpin in failure path In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf is immediately unpinned but the umem_dmabuf->pinned flag is still set. Then, when ib_umem_release() is called, it calls ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again. Fix this by removing the immediate unpin upon failure and just let the ib_umem_release/revoke path handle it. This also ensures the proper unmap-unpin unwind ordering if the dmabuf_map_pages call happened to fail due to dma_resv_wait_timeout (and therefore has a non-NULL umem_dmabuf->sgt).

In the Linux kernel, the following vulnerability has been resolved: iavf: fix PTP use-after-free during reset Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a worker to cache PHC time, but failed to stop it during reset or disable. This creates a race condition where `iavf_reset_task()` or `iavf_disable_vf()` free adapter resources (AQ) while the worker is still running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it accesses freed memory/locks, leading to a crash. Fix this by calling `iavf_ptp_release()` before tearing down the adapter. This ensures `ptp_clock_unregister()` synchronously cancels the worker and cleans up the chardev before the backing resources are destroyed.

In the Linux kernel, the following vulnerability has been resolved: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np) on the error path. However, after the devm_add_action_or_reset() returns, the of_node_put(clk_mux_np) is called again, causing a double free. Fix by returning directly, to avoid the duplicate of_node_put().

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() In the drain loop, the local variable 'runtime' is reassigned to a linked stream's runtime (runtime = s->runtime at line 2157). After releasing the stream lock at line 2169, the code accesses runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size (lines 2170-2178) — all referencing the linked stream's runtime without any lock or refcount protecting its lifetime. A concurrent close() on the linked stream's fd triggers snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private() → snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime). No synchronization prevents kfree(runtime) from completing while the drain path dereferences the stale pointer. Fix by caching the needed runtime fields (no_period_wakeup, rate, buffer_size) into local variables while still holding the stream lock, and using the cached values after the lock is released.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Return queued buffers on start_streaming() failure Return buffers if streaming fails to start due to uvc_pm_get() error. This bug may be responsible for a warning I got running while :; do yavta -c3 /dev/video0; done on an xHCI controller which failed under this workload. I had no luck reproducing this warning again to confirm. xhci_hcd 0000:09:00.0: HC died; cleaning up usb 13-2: USB disconnect, device number 2 WARNING: CPU: 2 PID: 29386 at drivers/media/common/videobuf2/videobuf2-core.c:1803 vb2_start_streaming+0xac/0x120

In the Linux kernel, the following vulnerability has been resolved: xfrm: Wait for RCU readers during policy netns exit xfrm_policy_fini() frees the policy_bydst hash tables after flushing the policy work items and deleting all policies, but it does not wait for concurrent RCU readers to leave their read-side critical sections first. The policy_bydst tables are published via rcu_assign_pointer() and are looked up through rcu_dereference_check(), so netns teardown must also wait for an RCU grace period before freeing the table memory. Fix this by adding synchronize_rcu() before freeing the policy hash tables.

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook.

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix Null reference while testing fluster When multi instances are created/destroyed, many interrupts happens and structures for decoder are removed. "struct vpu_instance" this structure is shared for all flow in the decoder, so if the structure is not protected by lock, Null dereference could happens sometimes. IRQ Handler was spilt to two phases and Lock was added as well.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Add sanity check for OOB writes at silencing At silencing the playback URB packets in the implicit fb mode before the actual playback, we blindly assume that the received packets fit with the buffer size. But when the setup in the capture stream differs from the playback stream (e.g. due to the USB core limitation of max packet size), such an inconsistency may lead to OOB writes to the buffer, resulting in a crash. For addressing it, add a sanity check of the transfer buffer size at prepare_silent_urb(), and stop the data copy if the received data overflows. Also, report back the transfer error properly from there, too. Note that this doesn't fix the root cause of the playback error itself, but this merely covers the kernel Oops.

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: AV1: Fix tile info buffer size Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix type confusion in bond_setup_by_slave() kernel BUG at net/core/skbuff.c:2306! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306 RSP: 0018:ffffc90004aff760 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900 RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780 R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0 Call Trace: <TASK> ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa54/0xc30 net/socket.c:2592 ___sys_sendmsg+0x190/0x1e0 net/socket.c:2646 __sys_sendmsg+0x170/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe1a0e6c1a9 When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond, bond_setup_by_slave() directly copies the slave's header_ops to the bond device: bond_dev->header_ops = slave_dev->header_ops; This causes a type confusion when dev_hard_header() is later called on the bond device. Functions like ipgre_header(), ip6gre_header(),all use netdev_priv(dev) to access their device-specific private data. When called with the bond device, netdev_priv() returns the bond's private data (struct bonding) instead of the expected type (e.g. struct ip_tunnel), leading to garbage values being read and kernel crashes. Fix this by introducing bond_header_ops with wrapper functions that delegate to the active slave's header_ops using the slave's own device. This ensures netdev_priv() in the slave's header functions always receives the correct device. The fix is placed in the bonding driver rather than individual device drivers, as the root cause is bond blindly inheriting header_ops from the slave without considering that these callbacks expect a specific netdev_priv() layout. The type confusion can be observed by adding a printk in ipgre_header() and running the following commands: ip link add dummy0 type dummy ip addr add 10.0.0.1/24 dev dummy0 ip link set dummy0 up ip link add gre1 type gre local 10.0.0.1 ip link add bond1 type bond mode active-backup ip link set gre1 master bond1 ip link set gre1 up ip link set bond1 up ip addr add fe80::1/64 dev bond1

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying the atmel_hlcdc_plane state structure without properly duplicating the drm_plane_state. In particular, state->commit remained set to the old state commit, which can lead to a use-after-free in the next drm_atomic_commit() call. Fix this by calling __drm_atomic_helper_duplicate_plane_state(), which correctly clones the base drm_plane_state (including the ->commit pointer). It has been seen when closing and re-opening the device node while another DRM client (e.g. fbdev) is still attached: ============================================================================= BUG kmalloc-64 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- 0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0 pid=29 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_framebuffer_remove+0x4cc/0x5a8 drm_mode_rmfb_work_fn+0x6c/0x80 process_one_work+0x12c/0x2cc worker_thread+0x2a8/0x400 kthread+0xc0/0xdc ret_from_fork+0x14/0x28 Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0 pid=169 drm_atomic_helper_commit_hw_done+0x100/0x150 drm_atomic_helper_commit_tail+0x64/0x8c commit_tail+0x168/0x18c drm_atomic_helper_commit+0x138/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54 Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0 flags=0x200(workingset|zone=0) Object 0xc611b340 @offset=832 fp=0xc611b7c0

In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RSS context delete logic We need to free the corresponding RSS context VNIC in FW everytime an RSS context is deleted in driver. Commit 667ac333dbb7 added a check to delete the VNIC in FW only when netif_running() is true to help delete RSS contexts with interface down. Having that condition will make the driver leak VNICs in FW whenever close() happens with active RSS contexts. On the subsequent open(), as part of RSS context restoration, we will end up trying to create extra VNICs for which we did not make any reservation. FW can fail this request, thereby making us lose active RSS contexts. Suppose an RSS context is deleted already and we try to process a delete request again, then the HWRM functions will check for validity of the request and they simply return if the resource is already freed. So, even for delete-when-down cases, netif_running() check is not necessary. Remove the netif_running() condition check when deleting an RSS context.

In the Linux kernel, the following vulnerability has been resolved: ceph: add a bunch of missing ceph_path_info initializers ceph_mdsc_build_path() must be called with a zero-initialized ceph_path_info parameter, or else the following ceph_mdsc_free_path_info() may crash. Example crash (on Linux 6.18.12): virt_to_cache: Object is not a Slab page! WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400 [...] Call Trace: [...] ceph_open+0x13d/0x3e0 do_dentry_open+0x134/0x480 vfs_open+0x2a/0xe0 path_openat+0x9a3/0x1160 [...] cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400 [...] kernel BUG at mm/slub.c:634! Oops: invalid opcode: 0000 [#1] SMP NOPTI RIP: 0010:__slab_free+0x1a4/0x350 Some of the ceph_mdsc_build_path() callers had initializers, but others had not, even though they were all added by commit 15f519e9f883 ("ceph: fix race condition validating r_parent before applying state"). The ones without initializer are suspectible to random crashes. (I can imagine it could even be possible to exploit this bug to elevate privileges.) Unfortunately, these Ceph functions are undocumented and its semantics can only be derived from the code. I see that ceph_mdsc_build_path() initializes the structure only on success, but not on error. Calling ceph_mdsc_free_path_info() after a failed ceph_mdsc_build_path() call does not even make sense, but that's what all callers do, and for it to be safe, the structure must be zero-initialized. The least intrusive approach to fix this is therefore to add initializers everywhere.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release().

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE handler in rxrpc_verify_response() copy the skb to a linear one before calling into the security ops only when skb_cloned() is true. An skb that is not cloned but still carries externally-owned paged fragments (e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via __ip_append_data, or a chained skb_has_frag_list()) falls through to the in-place decryption path, which binds the frag pages directly into the AEAD/skcipher SGL via skb_to_sgvec(). Extend the gate to also unshare when skb_has_frag_list() or skb_has_shared_frag() is true. This catches the splice-loopback vector and other externally-shared frag sources while preserving the zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC page_pool RX, GRO). The OOM/trace handling already in place is reused.

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix percpu use-after-free in remove_nh_grp_entry When removing a nexthop from a group, remove_nh_grp_entry() publishes the new group via rcu_assign_pointer() then immediately frees the removed entry's percpu stats with free_percpu(). However, the synchronize_net() grace period in the caller remove_nexthop_from_groups() runs after the free. RCU readers that entered before the publish still see the old group and can dereference the freed stats via nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a use-after-free on percpu memory. Fix by deferring the free_percpu() until after synchronize_net() in the caller. Removed entries are chained via nh_list onto a local deferred free list. After the grace period completes and all RCU readers have finished, the percpu stats are safely freed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups.

In the Linux kernel, the following vulnerability has been resolved: eventpoll: defer struct eventpoll free to RCU grace period In certain situations, ep_free() in eventpoll.c will kfree the epi->ep eventpoll struct while it still being used by another concurrent thread. Defer the kfree() to an RCU callback to prevent UAF.

In the Linux kernel, the following vulnerability has been resolved: rust_binder: check ownership before using vma When installing missing pages (or zapping them), Rust Binder will look up the vma in the mm by address, and then call vm_insert_page (or zap_page_range_single). However, if the vma is closed and replaced with a different vma at the same address, this can lead to Rust Binder installing pages into the wrong vma. By installing the page into a writable vma, it becomes possible to write to your own binder pages, which are normally read-only. Although you're not supposed to be able to write to those pages, the intent behind the design of Rust Binder is that even if you get that ability, it should not lead to anything bad. Unfortunately, due to another bug, that is not the case. To fix this, store a pointer in vm_private_data and check that the vma returned by vma_lookup() has the right vm_ops and vm_private_data before trying to use the vma. This should ensure that Rust Binder will refuse to interact with any other VMA. The plan is to introduce more vma abstractions to avoid this unsafe access to vm_ops and vm_private_data, but for now let's start with the simplest possible fix. C Binder performs the same check in a slightly different way: it provides a vm_ops->close that sets a boolean to true, then checks that boolean after calling vma_lookup(), but this is more fragile than the solution in this patch. (We probably still want to do both, but the vm_ops->close callback will be added later as part of the follow-up vma API changes.) It's still possible to remap the vma so that pages appear in the right vma, but at the wrong offset, but this is a separate issue and will be fixed when Rust Binder gets a vm_ops->close callback.