Integer overflow in the xfs_acl_from_disk function in fs/xfs/xfs_acl.c in the Linux kernel before 3.1.9 allows local users to cause a denial of service (panic) via a filesystem with a malformed ACL, leading to a heap-based buffer overflow.

The __sys_sendmsg function in net/socket.c in the Linux kernel before 3.1 allows local users to cause a denial of service (system crash) via crafted use of the sendmmsg system call, leading to an incorrect pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ARM processor Error: don't go past allocated memory If the BIOS generates a very small ARM Processor Error, or an incomplete one, the current logic will fail to deferrence err->section_length and ctx_info->size Add checks to avoid that. With such changes, such GHESv2 records won't cause OOPSes like this: [ 1.492129] Internal error: Oops: 0000000096000005 [#1] SMP [ 1.495449] Modules linked in: [ 1.495820] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.18.0-rc1-00017-gabadcc3553dd-dirty #18 PREEMPT [ 1.496125] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 [ 1.496433] Workqueue: kacpi_notify acpi_os_execute_deferred [ 1.496967] pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.497199] pc : log_arm_hw_error+0x5c/0x200 [ 1.497380] lr : ghes_handle_arm_hw_error+0x94/0x220 0xffff8000811c5324 is in log_arm_hw_error (../drivers/ras/ras.c:75). 70 err_info = (struct cper_arm_err_info *)(err + 1); 71 ctx_info = (struct cper_arm_ctx_info *)(err_info + err->err_info_num); 72 ctx_err = (u8 *)ctx_info; 73 74 for (n = 0; n < err->context_info_num; n++) { 75 sz = sizeof(struct cper_arm_ctx_info) + ctx_info->size; 76 ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + sz); 77 ctx_len += sz; 78 } 79 and similar ones while trying to access section_length on an error dump with too small size. [ rjw: Subject tweaks ]

A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues.

An integer overflow vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_execbuf.c in GPU component of Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: properly cancel timer from taprio_destroy() There is a comment in qdisc_create() about us not calling ops->reset() in some cases. err_out4: /* * Any broken qdiscs that would require a ops->reset() here? * The qdisc was never in action so it shouldn't be necessary. */ As taprio sets a timer before actually receiving a packet, we need to cancel it from ops->destroy, just in case ops->reset has not been called. syzbot reported: ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22 WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000130f330 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020 R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000 FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __debug_check_no_obj_freed lib/debugobjects.c:987 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018 slab_free_hook mm/slub.c:1603 [inline] slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653 slab_free mm/slub.c:3213 [inline] kfree+0xe4/0x540 mm/slub.c:4267 qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299 tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2403 ___sys_sendmsg+0xf3/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80

A NULL pointer dereference flaw was found in the UNIX protocol in net/unix/diag.c In unix_diag_get_exact in the Linux Kernel. The newly allocated skb does not have sk, leading to a NULL pointer. This flaw allows a local user to crash or potentially cause a denial of service.

The m_stop function in fs/proc/task_mmu.c in the Linux kernel before 2.6.39 allows local users to cause a denial of service (OOPS) via vectors that trigger an m_start error.

Integer overflow in the oom_badness function in mm/oom_kill.c in the Linux kernel before 3.1.8 on 64-bit platforms allows local users to cause a denial of service (memory consumption or process termination) by using a certain large amount of memory.

crypto/ghash-generic.c in the Linux kernel before 3.1 allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact by triggering a failed or missing ghash_setkey function call, followed by a (1) ghash_update function call or (2) ghash_final function call, as demonstrated by a write operation on an AF_ALG socket.

Buffer overflow in the fuse_notify_inval_entry function in fs/fuse/dev.c in the Linux kernel before 3.1 allows local users to cause a denial of service (BUG_ON and system crash) by leveraging the ability to mount a FUSE filesystem.

AESM daemon in Intel Software Guard Extensions Platform Software Component for Linux before 2.1.102 can effectively be disabled by a local attacker creating a denial of services like remote attestation provided by the AESM.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix unpinning of pages when an access is present syzkaller found that the calculation of batch_last_index should use 'start_index' since at input to this function the batch is either empty or it has already been adjusted to cross any accesses so it will start at the point we are unmapping from. Getting this wrong causes the unmap to run over the end of the pages which corrupts pages that were never mapped. In most cases this triggers the num pinned debugging: WARNING: CPU: 0 PID: 557 at drivers/iommu/iommufd/pages.c:294 __iopt_area_unfill_domain+0x152/0x560 Modules linked in: CPU: 0 PID: 557 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__iopt_area_unfill_domain+0x152/0x560 Code: d2 0f ff 44 8b 64 24 54 48 8b 44 24 48 31 ff 44 89 e6 48 89 44 24 38 e8 fc d3 0f ff 45 85 e4 0f 85 eb 01 00 00 e8 0e d2 0f ff <0f> 0b e8 07 d2 0f ff 48 8b 44 24 38 89 5c 24 58 89 18 8b 44 24 54 RSP: 0018:ffffc9000108baf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffffffff821e3f85 RDX: 0000000000000000 RSI: ffff88800faf0000 RDI: 0000000000000002 RBP: ffffc9000108bd18 R08: 000000000003ca25 R09: 0000000000000014 R10: 000000000003ca00 R11: 0000000000000024 R12: 0000000000000004 R13: 0000000000000801 R14: 00000000000007ff R15: 0000000000000800 FS: 00007f3499ce1740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000243 CR3: 00000000179c2001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> iopt_area_unfill_domain+0x32/0x40 iopt_table_remove_domain+0x23f/0x4c0 iommufd_device_selftest_detach+0x3a/0x90 iommufd_selftest_destroy+0x55/0x70 iommufd_object_destroy_user+0xce/0x130 iommufd_destroy+0xa2/0xc0 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Also add some useful WARN_ON sanity checks.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: pci_generic: Remove WQ_MEM_RECLAIM flag from state workqueue A recent change created a dedicated workqueue for the state-change work with WQ_HIGHPRI (no strong reason for that) and WQ_MEM_RECLAIM flags, but the state-change work (mhi_pm_st_worker) does not guarantee forward progress under memory pressure, and will even wait on various memory allocations when e.g. creating devices, loading firmware, etc... The work is then not part of a memory reclaim path... Moreover, this causes a warning in check_flush_dependency() since we end up in code that flushes a non-reclaim workqueue: [ 40.969601] workqueue: WQ_MEM_RECLAIM mhi_hiprio_wq:mhi_pm_st_worker [mhi] is flushing !WQ_MEM_RECLAIM events_highpri:flush_backlog [ 40.969612] WARNING: CPU: 4 PID: 158 at kernel/workqueue.c:2607 check_flush_dependency+0x11c/0x140 [ 40.969733] Call Trace: [ 40.969740] __flush_work+0x97/0x1d0 [ 40.969745] ? wake_up_process+0x15/0x20 [ 40.969749] ? insert_work+0x70/0x80 [ 40.969750] ? __queue_work+0x14a/0x3e0 [ 40.969753] flush_work+0x10/0x20 [ 40.969756] rollback_registered_many+0x1c9/0x510 [ 40.969759] unregister_netdevice_queue+0x94/0x120 [ 40.969761] unregister_netdev+0x1d/0x30 [ 40.969765] mhi_net_remove+0x1a/0x40 [mhi_net] [ 40.969770] mhi_driver_remove+0x124/0x250 [mhi] [ 40.969776] device_release_driver_internal+0xf0/0x1d0 [ 40.969778] device_release_driver+0x12/0x20 [ 40.969782] bus_remove_device+0xe1/0x150 [ 40.969786] device_del+0x17b/0x3e0 [ 40.969791] mhi_destroy_device+0x9a/0x100 [mhi] [ 40.969796] ? mhi_unmap_single_use_bb+0x50/0x50 [mhi] [ 40.969799] device_for_each_child+0x5e/0xa0 [ 40.969804] mhi_pm_st_worker+0x921/0xf50 [mhi]

A NULL pointer dereference flaw was found in the az6027 driver in drivers/media/usb/dev-usb/az6027.c in the Linux Kernel. The message from user space is not checked properly before transferring into the device. This flaw allows a local user to crash the system or potentially cause a denial of service.

Use after free in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allowed an authenticated user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: always use O_NONBLOCK read/write syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop() from p9_conn_destroy() from p9_fd_close() is failing to interrupt already started kernel_read() from p9_fd_read() from p9_read_work() and/or kernel_write() from p9_fd_write() from p9_write_work() requests. Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open() does not set O_NONBLOCK flag, but pipe blocks unless signal is pending, p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when the file descriptor refers to a pipe. In other words, pipe file descriptor needs to be handled as if socket file descriptor. We somehow need to interrupt kernel_read()/kernel_write() on pipes. A minimal change, which this patch is doing, is to set O_NONBLOCK flag from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing of regular files. But this approach changes O_NONBLOCK flag on userspace- supplied file descriptors (which might break userspace programs), and O_NONBLOCK flag could be changed by userspace. It would be possible to set O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still remains small race window for clearing O_NONBLOCK flag. If we don't want to manipulate O_NONBLOCK flag, we might be able to surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING) and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are processed by kernel threads which process global system_wq workqueue, signals could not be delivered from remote threads when p9_mux_poll_stop() from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be needed if we count on signals for making kernel_read()/kernel_write() non-blocking. [Dominique: add comment at Christian's suggestion]

The Performance Events subsystem in the Linux kernel before 3.1 does not properly handle event overflows associated with PERF_COUNT_SW_CPU_CLOCK events, which allows local users to cause a denial of service (system hang) via a crafted application.

The Linux kernel from v2.3.36 before v2.6.39 allows local unprivileged users to cause a denial of service (memory consumption) by triggering creation of PTE pages.

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables.

The Linux kernel before 2.6.39 does not properly create transparent huge pages in response to a MAP_PRIVATE mmap system call on /dev/zero, which allows local users to cause a denial of service (system crash) via a crafted application.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Be stricter about IO mapping flags The current panthor_device_mmap_io() implementation has two issues: 1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET, panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear VM_MAYWRITE. That means userspace can use mprotect() to make the mapping writable later on. This is a classic Linux driver gotcha. I don't think this actually has any impact in practice: When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and when the GPU is not powered, the dummy_latest_flush page provided by the driver is deliberately designed to not do any flushes, so the only thing writing to the dummy_latest_flush could achieve would be to make *more* flushes happen. 2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are mappings without the VM_SHARED flag). MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has copy-on-write semantics, which for VM_PFNMAP are semi-supported but fairly cursed. In particular, in such a mapping, the driver can only install PTEs during mmap() by calling remap_pfn_range() (because remap_pfn_range() wants to **store the physical address of the mapped physical memory into the vm_pgoff of the VMA**); installing PTEs later on with a fault handler (as panthor does) is not supported in private mappings, and so if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when it hits a BUG() check. Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for the FLUSH_ID don't make sense). Reproducers for both scenarios are in the notes of my patch on the mailing list; I tested that these bugs exist on a Rock 5B machine. Note that I only compile-tested the patch, I haven't tested it; I don't have a working kernel build setup for the test machine yet. Please test it before applying it.

A locally locally exploitable DOS vulnerability was found in pax-linux versions 2.6.32.33-test79.patch, 2.6.38-test3.patch, and 2.6.37.4-test14.patch. A bad bounds check in arch_get_unmapped_area_topdown triggered by programs doing an mmap after a MAP_GROWSDOWN mmap will create an infinite loop condition without releasing the VM semaphore eventually leading to a system crash.

In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe() soc_dev_attr->revision could be NULL, thus, a pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix NULL pointer in can_accept_new_subflow When testing valkey benchmark tool with MPTCP, the kernel panics in 'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL. Call trace: mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P) subflow_syn_recv_sock (./net/mptcp/subflow.c:854) tcp_check_req (./net/ipv4/tcp_minisocks.c:863) tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268) ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207) ip_local_deliver_finish (./net/ipv4/ip_input.c:234) ip_local_deliver (./net/ipv4/ip_input.c:254) ip_rcv_finish (./net/ipv4/ip_input.c:449) ... According to the debug log, the same req received two SYN-ACK in a very short time, very likely because the client retransmits the syn ack due to multiple reasons. Even if the packets are transmitted with a relevant time interval, they can be processed by the server on different CPUs concurrently). The 'subflow_req->msk' ownership is transferred to the subflow the first, and there will be a risk of a null pointer dereference here. This patch fixes this issue by moving the 'subflow_req->msk' under the `own_req == true` conditional. Note that the !msk check in subflow_hmac_valid() can be dropped, because the same check already exists under the own_req mpj branch where the code has been moved to.

Uncontrolled resource consumption in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Don't call cleanup on profile rollback failure When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode <snipped> [ 745.551290] Call Trace: [ 745.551590] <TASK> [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b

In the Linux kernel, the following vulnerability has been resolved: PCI: pciehp: Avoid unnecessary device replacement check Hot-removal of nested PCI hotplug ports suffers from a long-standing race condition which can lead to a deadlock: A parent hotplug port acquires pci_lock_rescan_remove(), then waits for pciehp to unbind from a child hotplug port. Meanwhile that child hotplug port tries to acquire pci_lock_rescan_remove() as well in order to remove its own children. The deadlock only occurs if the parent acquires pci_lock_rescan_remove() first, not if the child happens to acquire it first. Several workarounds to avoid the issue have been proposed and discarded over the years, e.g.: https://lore.kernel.org/r/4c882e25194ba8282b78fe963fec8faae7cf23eb.1529173804.git.lukas@wunner.de/ A proper fix is being worked on, but needs more time as it is nontrivial and necessarily intrusive. Recent commit 9d573d19547b ("PCI: pciehp: Detect device replacement during system sleep") provokes more frequent occurrence of the deadlock when removing more than one Thunderbolt device during system sleep. The commit sought to detect device replacement, but also triggered on device removal. Differentiating reliably between replacement and removal is impossible because pci_get_dsn() returns 0 both if the device was removed, as well as if it was replaced with one lacking a Device Serial Number. Avoid the more frequent occurrence of the deadlock by checking whether the hotplug port itself was hot-removed. If so, there's no sense in checking whether its child device was replaced. This works because the ->resume_noirq() callback is invoked in top-down order for the entire hierarchy: A parent hotplug port detecting device replacement (or removal) marks all children as removed using pci_dev_set_disconnected() and a child hotplug port can then reliably detect being removed.

In the Linux kernel, the following vulnerability has been resolved: netlink: terminate outstanding dump on socket close Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don't actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we're back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn't have to take a reference of its own.

In the Linux kernel, the following vulnerability has been resolved: PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 [bigeasy: reword commit message] Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> [kwilczynski: commit log] [bhelgaas: add back report info from https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix missing last_unlink_trans update when removing a directory When removing a directory we are not updating its last_unlink_trans field, which can result in incorrect fsync behaviour in case some one fsyncs the directory after it was removed because it's holding a file descriptor on it. Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd <trigger power failure> When attempting to mount the filesystem, the log replay will fail with an -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: spi: rspi: fix controller deregistration Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix accept queue count leak on transport mismatch virtio_transport_recv_listen() calls sk_acceptq_added() before vsock_assign_transport(). If vsock_assign_transport() fails or selects a different transport, the error path returns without calling sk_acceptq_removed(), permanently incrementing sk_ack_backlog. After approximately backlog+1 such failures, sk_acceptq_is_full() returns true, causing the listener to reject all new connections. Fix by moving sk_acceptq_added() to after the transport validation, matching the pattern used by vmci_transport and hyperv_transport.

In the Linux kernel, the following vulnerability has been resolved: genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie The IOMMU translation for MSI message addresses has been a 2-step process, separated in time: 1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address is stored in the MSI descriptor when an MSI interrupt is allocated. 2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a translated message address. This has an inherent lifetime problem for the pointer stored in the cookie that must remain valid between the two steps. However, there is no locking at the irq layer that helps protect the lifetime. Today, this works under the assumption that the iommu domain is not changed while MSI interrupts being programmed. This is true for normal DMA API users within the kernel, as the iommu domain is attached before the driver is probed and cannot be changed while a driver is attached. Classic VFIO type1 also prevented changing the iommu domain while VFIO was running as it does not support changing the "container" after starting up. However, iommufd has improved this so that the iommu domain can be changed during VFIO operation. This potentially allows userspace to directly race VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()). This potentially causes both the cookie pointer and the unlocked call to iommu_get_domain_for_dev() on the MSI translation path to become UAFs. Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA address is already known during iommu_dma_prepare_msi() and cannot change. Thus, it can simply be stored as an integer in the MSI descriptor. The other UAF related to iommu_get_domain_for_dev() will be addressed in patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by using the IOMMU group mutex.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Avoid overflow on msg bound check As pointed out by SDL, the previous condition may be vulnerable to overflow. (cherry picked from commit 3c5367d950140d4ec7af830b2268a5a6fdaa3885)

In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix heap leak in IEEE 1284 device ID via short response usblp_ctrl_msg() collapses the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. A broken printer can complete the GET_DEVICE_ID control transfer short and the driver has no way to know. usblp_cache_device_id_string() reads the 2-byte big-endian length prefix from the response and trusts it (clamped only to the buffer bounds). The buffer is kmalloc(1024) at probe time. A device that sends exactly two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves device_id_string[2..1022] holding stale kmalloc heap. That stale data is then exposed: - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated at the first NUL in the stale heap), and - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full claimed length regardless of NULs, up to 1021 bytes of uninitialized heap, with the leak size chosen by the device. Fix this up by just zapping the buffer with zeros before each request sent to the device.

In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix locking in regulator_resolve_supply() error path If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix failure to rebuild free space tree using multiple transactions If we are rebuilding a free space tree, while modifying the free space tree we may need to allocate a new metadata block group. If we end up using multiple transactions for the rebuild, when we call btrfs_end_transaction() we enter btrfs_create_pending_block_groups() which calls add_block_group_free_space() to add items to the free space tree for the block group. Then later during the free space tree rebuild, at btrfs_rebuild_free_space_tree(), we may find such new block groups and call populate_free_space_tree() for them, which fails with -EEXIST because there are already items in the free space tree. Then we abort the transaction with -EEXIST at btrfs_rebuild_free_space_tree(). Notice that we say "may find" the new block groups because a new block group may be inserted in the block groups rbtree, which is being iterated by the rebuild process, before or after the current node where the rebuild process is currently at. Syzbot recently reported such case which produces a trace like the following: ------------[ cut here ]------------ BTRFS: Transaction aborted (error -17) WARNING: CPU: 1 PID: 7626 at fs/btrfs/free-space-tree.c:1341 btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 Modules linked in: CPU: 1 UID: 0 PID: 7626 Comm: syz.2.25 Not tainted 6.15.0-rc7-syzkaller-00085-gd7fa1af5b33e-dirty #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 lr : btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 sp : ffff80009c4f7740 x29: ffff80009c4f77b0 x28: ffff0000d4c3f400 x27: 0000000000000000 x26: dfff800000000000 x25: ffff70001389eee8 x24: 0000000000000003 x23: 1fffe000182b6e7b x22: 0000000000000000 x21: ffff0000c15b73d8 x20: 00000000ffffffef x19: ffff0000c15b7378 x18: 1fffe0003386f276 x17: ffff80008f31e000 x16: ffff80008adbe98c x15: 0000000000000001 x14: 1fffe0001b281550 x13: 0000000000000000 x12: 0000000000000000 x11: ffff60001b281551 x10: 0000000000000003 x9 : 1c8922000a902c00 x8 : 1c8922000a902c00 x7 : ffff800080485878 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff80008047843c x2 : 0000000000000001 x1 : ffff80008b3ebc40 x0 : 0000000000000001 Call trace: btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 (P) btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074 btrfs_remount_rw fs/btrfs/super.c:1319 [inline] btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543 reconfigure_super+0x1d4/0x6f0 fs/super.c:1083 do_remount fs/namespace.c:3365 [inline] path_mount+0xb34/0xde0 fs/namespace.c:4200 do_mount fs/namespace.c:4221 [inline] __do_sys_mount fs/namespace.c:4432 [inline] __se_sys_mount fs/namespace.c:4409 [inline] __arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 irq event stamp: 330 hardirqs last enabled at (329): [<ffff80008048590c>] raw_spin_rq_unlock_irq kernel/sched/sched.h:1525 [inline] hardirqs last enabled at (329): [<ffff80008048590c>] finish_lock_switch+0xb0/0x1c0 kernel/sched/core.c:5130 hardirqs last disabled at (330): [<ffff80008adb9e60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:511 softirqs last enabled at (10): [<ffff8000801fbf10>] local_bh_enable+0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address into one operation When compiling kernel source 'make -j $(nproc)' with the up-and-running KASAN-enabled kernel on a 256-core machine, the following soft lockup is shown: watchdog: BUG: soft lockup - CPU#28 stuck for 22s! [kworker/28:1:1760] CPU: 28 PID: 1760 Comm: kworker/28:1 Kdump: loaded Not tainted 6.10.0-rc5 #95 Workqueue: events drain_vmap_area_work RIP: 0010:smp_call_function_many_cond+0x1d8/0xbb0 Code: 38 c8 7c 08 84 c9 0f 85 49 08 00 00 8b 45 08 a8 01 74 2e 48 89 f1 49 89 f7 48 c1 e9 03 41 83 e7 07 4c 01 e9 41 83 c7 03 f3 90 <0f> b6 01 41 38 c7 7c 08 84 c0 0f 85 d4 06 00 00 8b 45 08 a8 01 75 RSP: 0018:ffffc9000cb3fb60 EFLAGS: 00000202 RAX: 0000000000000011 RBX: ffff8883bc4469c0 RCX: ffffed10776e9949 RDX: 0000000000000002 RSI: ffff8883bb74ca48 RDI: ffffffff8434dc50 RBP: ffff8883bb74ca40 R08: ffff888103585dc0 R09: ffff8884533a1800 R10: 0000000000000004 R11: ffffffffffffffff R12: ffffed1077888d39 R13: dffffc0000000000 R14: ffffed1077888d38 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8883bc400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005577b5c8d158 CR3: 0000000004850000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? watchdog_timer_fn+0x2cd/0x390 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x300/0x6d0 ? sched_clock_cpu+0x69/0x4e0 ? __pfx___hrtimer_run_queues+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? ktime_get_update_offsets_now+0x7f/0x2a0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? hrtimer_interrupt+0x2ca/0x760 ? __sysvec_apic_timer_interrupt+0x8c/0x2b0 ? sysvec_apic_timer_interrupt+0x6a/0x90 </IRQ> <TASK> ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? smp_call_function_many_cond+0x1d8/0xbb0 ? __pfx_do_kernel_range_flush+0x10/0x10 on_each_cpu_cond_mask+0x20/0x40 flush_tlb_kernel_range+0x19b/0x250 ? srso_return_thunk+0x5/0x5f ? kasan_release_vmalloc+0xa7/0xc0 purge_vmap_node+0x357/0x820 ? __pfx_purge_vmap_node+0x10/0x10 __purge_vmap_area_lazy+0x5b8/0xa10 drain_vmap_area_work+0x21/0x30 process_one_work+0x661/0x10b0 worker_thread+0x844/0x10e0 ? srso_return_thunk+0x5/0x5f ? __kthread_parkme+0x82/0x140 ? __pfx_worker_thread+0x10/0x10 kthread+0x2a5/0x370 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Debugging Analysis: 1. The following ftrace log shows that the lockup CPU spends too much time iterating vmap_nodes and flushing TLB when purging vm_area structures. (Some info is trimmed). kworker: funcgraph_entry: | drain_vmap_area_work() { kworker: funcgraph_entry: | mutex_lock() { kworker: funcgraph_entry: 1.092 us | __cond_resched(); kworker: funcgraph_exit: 3.306 us | } ... ... kworker: funcgraph_entry: | flush_tlb_kernel_range() { ... ... kworker: funcgraph_exit: # 7533.649 us | } ... ... kworker: funcgraph_entry: 2.344 us | mutex_unlock(); kworker: funcgraph_exit: $ 23871554 us | } The drain_vmap_area_work() spends over 23 seconds. There are 2805 flush_tlb_kernel_range() calls in the ftrace log. * One is called in __purge_vmap_area_lazy(). * Others are called by purge_vmap_node->kasan_release_vmalloc. purge_vmap_node() iteratively releases kasan vmalloc allocations and flushes TLB for each vmap_area. - [Rough calculation] Each flush_tlb_kernel_range() runs about 7.5ms. -- 2804 * 7.5ms = 21.03 seconds. -- That's why a soft lock is triggered. 2. Extending the soft lockup time can work around the issue (For example, # echo ---truncated---

In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind, which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this structure needs to be stored inside the driver data before invoking it. As drvdata is currently uninitialized it leads to a crash when registering the DSI DRM encoder right after acquiring the mode_config.idr_mutex, blocking all subsequent DRM operations. Fixes the following crash during mediatek-drm probe (tested on Xiaomi Smart Clock x04g): Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040 [...] Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib drm_dma_helper drm_kms_helper panel_simple [...] Call trace: drm_mode_object_add+0x58/0x98 (P) __drm_encoder_init+0x48/0x140 drm_encoder_init+0x6c/0xa0 drm_simple_encoder_init+0x20/0x34 [drm_kms_helper] mtk_dsi_bind+0x34/0x13c [mediatek_drm] component_bind_all+0x120/0x280 mtk_drm_bind+0x284/0x67c [mediatek_drm] try_to_bring_up_aggregate_device+0x23c/0x320 __component_add+0xa4/0x198 component_add+0x14/0x20 mtk_dsi_host_attach+0x78/0x100 [mediatek_drm] mipi_dsi_attach+0x2c/0x50 panel_simple_dsi_probe+0x4c/0x9c [panel_simple] mipi_dsi_drv_probe+0x1c/0x28 really_probe+0xc0/0x3dc __driver_probe_device+0x80/0x160 driver_probe_device+0x40/0x120 __device_attach_driver+0xbc/0x17c bus_for_each_drv+0x88/0xf0 __device_attach+0x9c/0x1cc device_initial_probe+0x54/0x60 bus_probe_device+0x34/0xa0 device_add+0x5b0/0x800 mipi_dsi_device_register_full+0xdc/0x16c mipi_dsi_host_register+0xc4/0x17c mtk_dsi_probe+0x10c/0x260 [mediatek_drm] platform_probe+0x5c/0xa4 really_probe+0xc0/0x3dc __driver_probe_device+0x80/0x160 driver_probe_device+0x40/0x120 __driver_attach+0xc8/0x1f8 bus_for_each_dev+0x7c/0xe0 driver_attach+0x24/0x30 bus_add_driver+0x11c/0x240 driver_register+0x68/0x130 __platform_register_drivers+0x64/0x160 mtk_drm_init+0x24/0x1000 [mediatek_drm] do_one_initcall+0x60/0x1d0 do_init_module+0x54/0x240 load_module+0x1838/0x1dc0 init_module_from_file+0xd8/0xf0 __arm64_sys_finit_module+0x1b4/0x428 invoke_syscall.constprop.0+0x48/0xc8 do_el0_svc+0x3c/0xb8 el0_svc+0x34/0xe8 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80)

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: streamline driver probe to avoid devres issues It was found that unloading 'hid_hyperv' module results in a devres complaint: ... hv_vmbus: unregistering driver hid_hyperv ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0 ... Call Trace: <TASK> ? devres_release_group+0x1f2/0x2c0 ? __warn+0xd1/0x1c0 ? devres_release_group+0x1f2/0x2c0 ? report_bug+0x32a/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? devres_release_group+0x1f2/0x2c0 ? devres_release_group+0x90/0x2c0 ? rcu_is_watching+0x15/0xb0 ? __pfx_devres_release_group+0x10/0x10 hid_device_remove+0xf5/0x220 device_release_driver_internal+0x371/0x540 ? klist_put+0xf3/0x170 bus_remove_device+0x1f1/0x3f0 device_del+0x33f/0x8c0 ? __pfx_device_del+0x10/0x10 ? cleanup_srcu_struct+0x337/0x500 hid_destroy_device+0xc8/0x130 mousevsc_remove+0xd2/0x1d0 [hid_hyperv] device_release_driver_internal+0x371/0x540 driver_detach+0xc5/0x180 bus_remove_driver+0x11e/0x2a0 ? __mutex_unlock_slowpath+0x160/0x5e0 vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] ... And the issue seems to be that the corresponding devres group is not allocated. Normally, devres_open_group() is called from __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' with 'mousevsc_hid_driver' stub and basically re-implements __hid_device_probe() by calling hid_parse() and hid_hw_start() but not devres_open_group(). hid_device_probe() does not call __hid_device_probe() for it. Later, when the driver is removed, hid_device_remove() calls devres_release_group() as it doesn't check whether hdev->driver was initially overridden or not. The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") but the commit itself seems to be correct. Fix the issue by dropping the 'hid_dev->driver' override and using hid_register_driver()/hid_unregister_driver() instead. Alternatively, it would have been possible to rely on the default handling but HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work for mousevsc as-is.

In the Linux kernel, the following vulnerability has been resolved: slab: ensure slab->obj_exts is clear in a newly allocated slab page ktest recently reported crashes while running several buffered io tests with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack. The signature indicates an invalid address dereference with low bits of slab->obj_exts being set. The bits were outside of the range used by page_memcg_data_flags and objext_flags and hence were not masked out by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts. The typical crash log looks like this: 00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 00510 Mem abort info: 00510 ESR = 0x0000000096000045 00510 EC = 0x25: DABT (current EL), IL = 32 bits 00510 SET = 0, FnV = 0 00510 EA = 0, S1PTW = 0 00510 FSC = 0x05: level 1 translation fault 00510 Data abort info: 00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000 00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000 00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 00510 Internal error: Oops: 0000000096000045 [#1] SMP 00510 Modules linked in: 00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE 00510 Hardware name: linux,dummy-virt (DT) 00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190 00510 lr : __kmalloc_noprof+0x150/0x310 00510 sp : ffffff80c87df6c0 00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200 00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001 00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180 00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000 00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700 00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006 00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58 00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556 00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060 00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000 00510 Call trace: 00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P) 00510 __kmalloc_noprof+0x150/0x310 00510 __bch2_folio_create+0x5c/0xf8 00510 bch2_folio_create+0x2c/0x40 00510 bch2_readahead+0xc0/0x460 00510 read_pages+0x7c/0x230 00510 page_cache_ra_order+0x244/0x3a8 00510 page_cache_async_ra+0x124/0x170 00510 filemap_readahead.isra.0+0x58/0xa0 00510 filemap_get_pages+0x454/0x7b0 00510 filemap_read+0xdc/0x418 00510 bch2_read_iter+0x100/0x1b0 00510 vfs_read+0x214/0x300 00510 ksys_read+0x6c/0x108 00510 __arm64_sys_read+0x20/0x30 00510 invoke_syscall.constprop.0+0x54/0xe8 00510 do_el0_svc+0x44/0xc8 00510 el0_svc+0x18/0x58 00510 el0t_64_sync_handler+0x104/0x130 00510 el0t_64_sync+0x154/0x158 00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881) 00510 ---[ end trace 0000000000000000 ]--- 00510 Kernel panic - not syncing: Oops: Fatal exception 00510 SMP: stopping secondary CPUs 00510 Kernel Offset: disabled 00510 CPU features: 0x0000,000000e0,00000410,8240500b 00510 Memory Limit: none Investigation indicates that these bits are already set when we allocate slab page and are not zeroed out after allocation. We are not yet sure why these crashes start happening only recently but regardless of the reason, not initializing a field that gets used later is wrong. Fix it by initializing slab->obj_exts during slab page allocation.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses Commit 50c6dbdfd16e ("x86/ioremap: Improve iounmap() address range checks") introduces a WARN when adrress ranges of iounmap are invalid. On Thinkpad P1 Gen 7 (Meteor Lake-P) this caused the following warning to appear: WARNING: CPU: 7 PID: 713 at arch/x86/mm/ioremap.c:461 iounmap+0x58/0x1f0 Modules linked in: rfkill(+) snd_timer(+) fjes(+) snd soundcore intel_pmc_core(+) int3403_thermal(+) int340x_thermal_zone intel_vsec pmt_telemetry acpi_pad pmt_class acpi_tad int3400_thermal acpi_thermal_rel joydev loop nfnetlink zram xe drm_suballoc_helper nouveau i915 mxm_wmi drm_ttm_helper gpu_sched drm_gpuvm drm_exec drm_buddy i2c_algo_bit crct10dif_pclmul crc32_pclmul ttm crc32c_intel polyval_clmulni rtsx_pci_sdmmc ucsi_acpi polyval_generic mmc_core hid_multitouch drm_display_helper ghash_clmulni_intel typec_ucsi nvme sha512_ssse3 video sha256_ssse3 nvme_core intel_vpu sha1_ssse3 rtsx_pci cec typec nvme_auth i2c_hid_acpi i2c_hid wmi pinctrl_meteorlake serio_raw ip6_tables ip_tables fuse CPU: 7 UID: 0 PID: 713 Comm: (udev-worker) Not tainted 6.12.0-rc2iounmap+ #42 Hardware name: LENOVO 21KWCTO1WW/21KWCTO1WW, BIOS N48ET19W (1.06 ) 07/18/2024 RIP: 0010:iounmap+0x58/0x1f0 Code: 85 6a 01 00 00 48 8b 05 e6 e2 28 04 48 39 c5 72 19 eb 26 cc cc cc 48 ba 00 00 00 00 00 00 32 00 48 8d 44 02 ff 48 39 c5 72 23 <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 cc cc cc cc 48 ba 00 00 00 00 00 RSP: 0018:ffff888131eff038 EFLAGS: 00010207 RAX: ffffc90000000000 RBX: 0000000000000000 RCX: ffff888e33b80000 RDX: dffffc0000000000 RSI: ffff888e33bc29c0 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8881598a8000 R09: ffff888e2ccedc10 R10: 0000000000000003 R11: ffffffffb3367634 R12: 00000000fe000000 R13: ffff888101d0da28 R14: ffffffffc2e437e0 R15: ffff888110b03b28 FS: 00007f3c1d4b3980(0000) GS:ffff888e33b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651cfc93578 CR3: 0000000124e4c002 CR4: 0000000000f70ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn.cold+0xb6/0x176 ? iounmap+0x58/0x1f0 ? report_bug+0x1f4/0x2b0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? iounmap+0x58/0x1f0 pmc_core_ssram_get_pmc+0x477/0x6c0 [intel_pmc_core] ? __pfx_pmc_core_ssram_get_pmc+0x10/0x10 [intel_pmc_core] ? __pfx_do_pci_enable_device+0x10/0x10 ? pci_wait_for_pending+0x60/0x110 ? pci_enable_device_flags+0x1e3/0x2e0 ? __pfx_mtl_core_init+0x10/0x10 [intel_pmc_core] pmc_core_ssram_init+0x7f/0x110 [intel_pmc_core] mtl_core_init+0xda/0x130 [intel_pmc_core] ? __mutex_init+0xb9/0x130 pmc_core_probe+0x27e/0x10b0 [intel_pmc_core] ? _raw_spin_lock_irqsave+0x96/0xf0 ? __pfx_pmc_core_probe+0x10/0x10 [intel_pmc_core] ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_mutex_lock+0x10/0x10 ? device_pm_check_callbacks+0x82/0x370 ? acpi_dev_pm_attach+0x234/0x2b0 platform_probe+0x9f/0x150 really_probe+0x1e0/0x8a0 __driver_probe_device+0x18c/0x370 ? __pfx___driver_attach+0x10/0x10 driver_probe_device+0x4a/0x120 __driver_attach+0x190/0x4a0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x103/0x180 ? __pfx_bus_for_each_dev+0x10/0x10 ? klist_add_tail+0x136/0x270 bus_add_driver+0x2fc/0x540 driver_register+0x1a5/0x360 ? __pfx_pmc_core_driver_init+0x10/0x10 [intel_pmc_core] do_one_initcall+0xa4/0x380 ? __pfx_do_one_initcall+0x10/0x10 ? kasan_unpoison+0x44/0x70 do_init_module+0x296/0x800 load_module+0x5090/0x6ce0 ? __pfx_load_module+0x10/0x10 ? ima_post_read_file+0x193/0x200 ? __pfx_ima_post_read_file+0x10/0x10 ? rw_verify_area+0x152/0x4c0 ? kernel_read_file+0x257/0x750 ? __pfx_kernel_read_file+0x10/0x10 ? __pfx_filemap_get_read_batch+0x10/0x10 ? init_module_from_file+0xd1/0x130 init_module_from_file+0xd1/0x130 ? __pfx_init_module_from_file+0x10/0 ---truncated---

drivers/scsi/bfa/bfa_core.c in the Linux kernel before 2.6.35 does not initialize a certain port data structure, which allows local users to cause a denial of service (system crash) via read operations on an fc_host statistics file.

In the Linux kernel, the following vulnerability has been resolved: rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access For kernels built with CONFIG_PREEMPT_RCU=y, the following scenario can result in a NULL-pointer dereference: CPU1 CPU2 rcu_preempt_deferred_qs_irqrestore rcu_print_task_exp_stall if (special.b.blocked) READ_ONCE(rnp->exp_tasks) != NULL raw_spin_lock_rcu_node np = rcu_next_node_entry(t, rnp) if (&t->rcu_node_entry == rnp->exp_tasks) WRITE_ONCE(rnp->exp_tasks, np) .... raw_spin_unlock_irqrestore_rcu_node raw_spin_lock_irqsave_rcu_node t = list_entry(rnp->exp_tasks->prev, struct task_struct, rcu_node_entry) (if rnp->exp_tasks is NULL, this will dereference a NULL pointer) The problem is that CPU2 accesses the rcu_node structure's->exp_tasks field without holding the rcu_node structure's ->lock and CPU2 did not observe CPU1's change to rcu_node structure's ->exp_tasks in time. Therefore, if CPU1 sets rcu_node structure's->exp_tasks pointer to NULL, then CPU2 might dereference that NULL pointer. This commit therefore holds the rcu_node structure's ->lock while accessing that structure's->exp_tasks field. [ paulmck: Apply Frederic Weisbecker feedback. ]

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't take dev_replace rwsem on task already holding it Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of the RAID stripe-tree, we get the following splat from lockdep: BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started ============================================ WARNING: possible recursive locking detected 6.11.0-rc3-btrfs-for-next #599 Not tainted -------------------------------------------- btrfs/2326 is trying to acquire lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 but task is already holding lock: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&fs_info->dev_replace.rwsem); lock(&fs_info->dev_replace.rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by btrfs/2326: #0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250 stack backtrace: CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x5b/0x80 __lock_acquire+0x2798/0x69d0 ? __pfx___lock_acquire+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x19d/0x4a0 ? btrfs_map_block+0x39f/0x2250 ? __pfx_lock_acquire+0x10/0x10 ? find_held_lock+0x2d/0x110 ? lock_is_held_type+0x8f/0x100 down_read+0x8e/0x440 ? btrfs_map_block+0x39f/0x2250 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x39f/0x2250 ? btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? btrfs_bio_counter_inc_blocked+0xd9/0x2e0 ? __kasan_slab_alloc+0x6e/0x70 ? __pfx_btrfs_map_block+0x10/0x10 ? __pfx_btrfs_bio_counter_inc_blocked+0x10/0x10 ? kmem_cache_alloc_noprof+0x1f2/0x300 ? mempool_alloc_noprof+0xed/0x2b0 btrfs_submit_chunk+0x28d/0x17e0 ? __pfx_btrfs_submit_chunk+0x10/0x10 ? bvec_alloc+0xd7/0x1b0 ? bio_add_folio+0x171/0x270 ? __pfx_bio_add_folio+0x10/0x10 ? __kasan_check_read+0x20/0x20 btrfs_submit_bio+0x37/0x80 read_extent_buffer_pages+0x3df/0x6c0 btrfs_read_extent_buffer+0x13e/0x5f0 read_tree_block+0x81/0xe0 read_block_for_search+0x4bd/0x7a0 ? __pfx_read_block_for_search+0x10/0x10 btrfs_search_slot+0x78d/0x2720 ? __pfx_btrfs_search_slot+0x10/0x10 ? lock_is_held_type+0x8f/0x100 ? kasan_save_track+0x14/0x30 ? __kasan_slab_alloc+0x6e/0x70 ? kmem_cache_alloc_noprof+0x1f2/0x300 btrfs_get_raid_extent_offset+0x181/0x820 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_btrfs_get_raid_extent_offset+0x10/0x10 ? down_read+0x194/0x440 ? __pfx_down_read+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 btrfs_map_block+0x5b5/0x2250 ? __pfx_btrfs_map_block+0x10/0x10 scrub_submit_initial_read+0x8fe/0x11b0 ? __pfx_scrub_submit_initial_read+0x10/0x10 submit_initial_group_read+0x161/0x3a0 ? lock_release+0x20e/0x710 ? __pfx_submit_initial_group_read+0x10/0x10 ? __pfx_lock_release+0x10/0x10 scrub_simple_mirror.isra.0+0x3eb/0x580 scrub_stripe+0xe4d/0x1440 ? lock_release+0x20e/0x710 ? __pfx_scrub_stripe+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? do_raw_read_unlock+0x44/0x70 ? _raw_read_unlock+0x23/0x40 scrub_chunk+0x257/0x4a0 scrub_enumerate_chunks+0x64c/0xf70 ? __mutex_unlock_slowpath+0x147/0x5f0 ? __pfx_scrub_enumerate_chunks+0x10/0x10 ? bit_wait_timeout+0xb0/0x170 ? __up_read+0x189/0x700 ? scrub_workers_get+0x231/0x300 ? up_write+0x490/0x4f0 btrfs_scrub_dev+0x52e/0xcd0 ? create_pending_snapshots+0x230/0x250 ? __pfx_btrfs_scrub_dev+0x10/0x10 btrfs_dev_replace_by_ioctl+0xd69/0x1d00 ? lock_acquire+0x19d/0x4a0 ? __pfx_btrfs_dev_replace_by_ioctl+0x10/0x10 ? ---truncated---

In the Linux kernel before 5.16.3, drivers/scsi/ufs/ufs-mediatek.c misinterprets the regulator_get return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

atm_tc_enqueue in net/sched/sch_atm.c in the Linux kernel through 6.1.4 allows attackers to cause a denial of service because of type confusion (non-negative numbers can sometimes indicate a TC_ACT_SHOT condition rather than valid classification results).