In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT Set the maximum size of a subrequest that writes to cachefiles to be MAX_RW_COUNT so that we don't overrun the maximum write we can make to the backing filesystem.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign linear_pitch_alignment even for VM [Description] Assign linear_pitch_alignment so we don't cause a divide by 0 error in VM environments

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Stop amdgpu_dm initialize when link nums greater than max_links [Why] Coverity report OVERRUN warning. There are only max_links elements within dc->links. link count could up to AMDGPU_DM_MAX_DISPLAY_INDEX 31. [How] Make sure link count less than max_links.

A flaw was found in the Linux kernel's vfio interface implementation that permits violation of the user's locked memory limit. If a device is bound to a vfio driver, such as vfio-pci, and the local attacker is administratively granted ownership of the device, it may cause a system memory exhaustion and thus a denial of service (DoS). Versions 3.10, 4.14 and 4.18 are vulnerable.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Check if WMI event data exists The BIOS can choose to return no event data in response to a WMI event, so the ACPI object passed to the WMI notify handler can be NULL. Check for such a situation and ignore the event in such a case.

In the Linux kernel, the following vulnerability has been resolved: video/aperture: optionally match the device in sysfb_disable() In aperture_remove_conflicting_pci_devices(), we currently only call sysfb_disable() on vga class devices. This leads to the following problem when the pimary device is not VGA compatible: 1. A PCI device with a non-VGA class is the boot display 2. That device is probed first and it is not a VGA device so sysfb_disable() is not called, but the device resources are freed by aperture_detach_platform_device() 3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable() 4. NULL pointer dereference via sysfb_disable() since the resources have already been freed by aperture_detach_platform_device() when it was called by the other device. Fix this by passing a device pointer to sysfb_disable() and checking the device to determine if we should execute it or not. v2: Fix build when CONFIG_SCREEN_INFO is not set v3: Move device check into the mutex Drop primary variable in aperture_remove_conflicting_pci_devices() Drop __init on pci sysfb_pci_dev_is_enabled()

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check BIOS images before it is used BIOS images may fail to load and null checks are added before they are used. This fixes 6 NULL_RETURNS issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't access invalid sched Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") accessing job->base.sched can produce unexpected results as the initialisation of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the memset. This commit fixes an issue when a CS would fail validation and would be rejected after job->num_ibs is incremented. In this case, amdgpu_ib_free(ring->adev, ...) will be called, which would crash the machine because the ring value is bogus. To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this because the device is actually not used in this function. The next commit will remove the ring argument completely. (cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Stop amdgpu_dm initialize when stream nums greater than 6 [Why] Coverity reports OVERRUN warning. Should abort amdgpu_dm initialize. [How] Return failure to amdgpu_dm_init.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: add missing bo locking in show_meminfo() bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Ensure index calculation will not overflow [WHY & HOW] Make sure vmid0p72_idx, vnom0p8_idx and vmax0p9_idx calculation will never overflow and exceess array size. This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: btrfs: handle errors from btrfs_dec_ref() properly In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is incorrect, we have proper error handling here, return the error.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix the waring dereferencing hive Check the amdgpu_hive_info *hive that maybe is NULL.

In the Linux kernel, the following vulnerability has been resolved: nfsd: ensure that nfsd4_fattr_args.context is zeroed out If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to checking for the security label, then args.context will be set to uninitialized junk on the stack, which we'll then try to free. Initialize it early.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference in pcs_get_function() pinmux_generic_get_function() can return NULL and the pointer 'function' was dereferenced without checking against NULL. Add checking of pointer 'function' in pcs_get_function(). Found by code review.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: qcom: x1e80100: Fix special pin offsets Remove the erroneus 0x100000 offset to prevent the boards from crashing on pin state setting, as well as for the intended state changes to take effect.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Free pvr_vm_gpuva after unlink This caused a measurable memory leak. Although the individual allocations are small, the leaks occurs in a high-usage codepath (remapping or unmapping device memory) so they add up quickly.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the routine unconditionally frees submitted mailbox commands regardless of return status. The issue is that for MBX_TIMEOUT cases, when firmware returns SFP information at a later time, that same mailbox memory region references previously freed memory in its cmpl routine. Fix by adding checks for the MBX_TIMEOUT return code. During mailbox resource cleanup, check the mbox flag to make sure that the wait did not timeout. If the MBOX_WAKE flag is not set, then do not free the resources because it will be freed when firmware completes the mailbox at a later time in its cmpl routine. Also, increase the timeout from 30 to 60 seconds to accommodate boot scripts requiring longer timeouts.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Prevent USB core invalid event buffer address access This commit addresses an issue where the USB core could access an invalid event buffer address during runtime suspend, potentially causing SMMU faults and other memory issues in Exynos platforms. The problem arises from the following sequence. 1. In dwc3_gadget_suspend, there is a chance of a timeout when moving the USB core to the halt state after clearing the run/stop bit by software. 2. In dwc3_core_exit, the event buffer is cleared regardless of the USB core's status, which may lead to an SMMU faults and other memory issues. if the USB core tries to access the event buffer address. To prevent this hardware quirk on Exynos platforms, this commit ensures that the event buffer address is not cleared by software when the USB core is active during runtime suspend by checking its status before clearing the buffer address.

In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is normally called with input from the firmware, so it should use IWL_FW_CHECK() instead of WARN_ON().

In the Linux kernel, the following vulnerability has been resolved: nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of sc_type") states_show() relied on sc_type field to be of valid type before calling into a subfunction to show content of a particular stateid. From that commit, we split the validity of the stateid into sc_status and no longer changed sc_type to 0 while unhashing the stateid. This resulted in kernel oopsing for nfsv4.0 opens that stay around and in nfs4_show_open() would derefence sc_file which was NULL. Instead, for closed open stateids forgo displaying information that relies of having a valid sc_file. To reproduce: mount the server with 4.0, read and close a file and then on the server cat /proc/fs/nfsd/clients/2/states [ 513.590804] Call trace: [ 513.590925] _raw_spin_lock+0xcc/0x160 [ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd] [ 513.591412] states_show+0x44c/0x488 [nfsd] [ 513.591681] seq_read_iter+0x5d8/0x760 [ 513.591896] seq_read+0x188/0x208 [ 513.592075] vfs_read+0x148/0x470 [ 513.592241] ksys_read+0xcc/0x178

In the Linux kernel, the following vulnerability has been resolved: mm: vmalloc: ensure vmap_block is initialised before adding to queue Commit 8c61291fd850 ("mm: fix incorrect vbq reference in purge_fragmented_block") extended the 'vmap_block' structure to contain a 'cpu' field which is set at allocation time to the id of the initialising CPU. When a new 'vmap_block' is being instantiated by new_vmap_block(), the partially initialised structure is added to the local 'vmap_block_queue' xarray before the 'cpu' field has been initialised. If another CPU is concurrently walking the xarray (e.g. via vm_unmap_aliases()), then it may perform an out-of-bounds access to the remote queue thanks to an uninitialised index. This has been observed as UBSAN errors in Android: | Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP | | Call trace: | purge_fragmented_block+0x204/0x21c | _vm_unmap_aliases+0x170/0x378 | vm_unmap_aliases+0x1c/0x28 | change_memory_common+0x1dc/0x26c | set_memory_ro+0x18/0x24 | module_enable_ro+0x98/0x238 | do_init_module+0x1b0/0x310 Move the initialisation of 'vb->cpu' in new_vmap_block() ahead of the addition to the xarray.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Move unregister out of atomic section Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")' moved the pmic_glink client list under a spinlock, as it is accessed by the rpmsg/glink callback, which in turn is invoked from IRQ context. This means that ucsi_unregister() is now called from atomic context, which isn't feasible as it's expecting a sleepable context. An effort is under way to get GLINK to invoke its callbacks in a sleepable context, but until then lets schedule the unregistration. A side effect of this is that ucsi_unregister() can now happen after the remote processor, and thereby the communication link with it, is gone. pmic_glink_send() is amended with a check to avoid the resulting NULL pointer dereference. This does however result in the user being informed about this error by the following entry in the kernel log: ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5

In the Linux kernel, the following vulnerability has been resolved: arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry In a review discussion of the changes to support vCPU hotplug where a check was added on the GICC being enabled if was online, it was noted that there is need to map back to the cpu and use that to index into a cpumask. As such, a valid ID is needed. If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible for the entry in cpu_madt_gicc[cpu] == NULL. This function would then cause a NULL pointer dereference. Whilst a path to trigger this has not been established, harden this caller against the possibility.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: Allocate memory for driver private data Fix driver not allocating memory for struct btintel_data which is used to store internal data.

In the Linux kernel, the following vulnerability has been resolved: driver: iio: add missing checks on iio_info's callback access Some callbacks from iio_info structure are accessed without any check, so if a driver doesn't implement them trying to access the corresponding sysfs entries produce a kernel oops such as: [ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute [...] [ 2203.783416] Call trace: [ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48 [ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120 [ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4 [ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0 [ 2203.802236] vfs_read from ksys_read+0xa4/0xd4 [ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54 [ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0) [ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000 [ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000 [ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0 [ 2203.830363] Code: bad PC value [ 2203.832695] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net: phy: Fix missing of_node_put() for leds The call of of_get_child_by_name() will cause refcount incremented for leds, if it succeeds, it should call of_node_put() to decrease it, fix it.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: protect references to superblock parameters exposed in sysfs The superblock buffers of nilfs2 can not only be overwritten at runtime for modifications/repairs, but they are also regularly swapped, replaced during resizing, and even abandoned when degrading to one side due to backing device issues. So, accessing them requires mutual exclusion using the reader/writer semaphore "nilfs->ns_sem". Some sysfs attribute show methods read this superblock buffer without the necessary mutual exclusion, which can cause problems with pointer dereferencing and memory access, so fix it.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Mark XDomain as unplugged when router is removed I noticed that when we do discrete host router NVM upgrade and it gets hot-removed from the PCIe side as a result of NVM firmware authentication, if there is another host connected with enabled paths we hang in tearing them down. This is due to fact that the Thunderbolt networking driver also tries to cleanup the paths and ends up blocking in tb_disconnect_xdomain_paths() waiting for the domain lock. However, at this point we already cleaned the paths in tb_stop() so there is really no need for tb_disconnect_xdomain_paths() to do that anymore. Furthermore it already checks if the XDomain is unplugged and bails out early so take advantage of that and mark the XDomain as unplugged when we remove the parent router.

In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Fix possible access to a freed kirqfd instance Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd created and added to the irqfds_list by privcmd_irqfd_assign() may get removed by another thread executing privcmd_irqfd_deassign(), while the former is still using it after dropping the locks. This can lead to a situation where an already freed kirqfd instance may be accessed and cause kernel oops. Use SRCU locking to prevent the same, as is done for the KVM implementation for irqfds.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check denominator pbn_div before used [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: added NULL check at start of dc_validate_stream [Why] prevent invalid memory access [How] check if dc and stream are NULL

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: SHAMPO, Fix incorrect page release Under the following conditions: 1) No skb created yet 2) header_size == 0 (no SHAMPO header) 3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the last page fragment of a SHAMPO header page) a new skb is formed with a page that is NOT a SHAMPO header page (it is a regular data page). Further down in the same function (mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from header_index is released. This is wrong and it leads to SHAMPO header pages being released more than once.

In the Linux kernel, the following vulnerability has been resolved: pinmux: Use sequential access to access desc->pinmux data When two client of the same gpio call pinctrl_select_state() for the same functionality, we are seeing NULL pointer issue while accessing desc->mux_owner. Let's say two processes A, B executing in pin_request() for the same pin and process A updates the desc->mux_usecount but not yet updated the desc->mux_owner while process B see the desc->mux_usecount which got updated by A path and further executes strcmp and while accessing desc->mux_owner it crashes with NULL pointer. Serialize the access to mux related setting with a mutex lock. cpu0 (process A) cpu1(process B) pinctrl_select_state() { pinctrl_select_state() { pin_request() { pin_request() { ... .... } else { desc->mux_usecount++; desc->mux_usecount && strcmp(desc->mux_owner, owner)) { if (desc->mux_usecount > 1) return 0; desc->mux_owner = owner; } }

In the Linux kernel, the following vulnerability has been resolved: ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery() When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference issue. Fix it by adding the check in ublk_ctrl_start_recovery() and return immediately in case of zero 'ub->nr_queues_ready'. BUG: kernel NULL pointer dereference, address: 0000000000000028 RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x75/0x170 ? exc_page_fault+0x64/0x140 ? asm_exc_page_fault+0x22/0x30 ? ublk_ctrl_start_recovery.constprop.0+0x82/0x180 ublk_ctrl_uring_cmd+0x4f7/0x6c0 ? pick_next_task_idle+0x26/0x40 io_uring_cmd+0x9a/0x1b0 io_issue_sqe+0x193/0x3f0 io_wq_submit_work+0x9b/0x390 io_worker_handle_work+0x165/0x360 io_wq_worker+0xcb/0x2f0 ? finish_task_switch.isra.0+0x203/0x290 ? finish_task_switch.isra.0+0x203/0x290 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_io_wq_worker+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards harder Since commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") dummy codecs declared like this: SND_SOC_DAILINK_DEF(dummy, DAILINK_COMP_ARRAY(COMP_DUMMY())); expand to: static struct snd_soc_dai_link_component dummy[] = { }; Which means that dummy is a zero sized array and thus dais[i].codecs should not be dereferenced *at all* since it points to the address of the next variable stored in the data section as the "dummy" variable has an address but no size, so even dereferencing dais[0] is already an out of bounds array reference. Which means that the if (dais[i].codecs->name) check added in commit 7d99a70b6595 ("ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards") relies on that the part of the next variable which the name member maps to just happens to be NULL. Which apparently so far it usually is, except when it isn't and then it results in crashes like this one: [ 28.795659] BUG: unable to handle page fault for address: 0000000000030011 ... [ 28.795780] Call Trace: [ 28.795787] <TASK> ... [ 28.795862] ? strcmp+0x18/0x40 [ 28.795872] 0xffffffffc150c605 [ 28.795887] platform_probe+0x40/0xa0 ... [ 28.795979] ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102] Really fix things this time around by checking dais.num_codecs != 0.

In the Linux kernel, the following vulnerability has been resolved: idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`.

In the Linux kernel, the following vulnerability has been resolved: libfs: fix infinite directory reads for offset dir After we switch tmpfs dir operations from simple_dir_operations to simple_offset_dir_operations, every rename happened will fill new dentry to dest dir's maple tree(&SHMEM_I(inode)->dir_offsets->mt) with a free key starting with octx->newx_offset, and then set newx_offset equals to free key + 1. This will lead to infinite readdir combine with rename happened at the same time, which fail generic/736 in xfstests(detail show as below). 1. create 5000 files(1 2 3...) under one dir 2. call readdir(man 3 readdir) once, and get one entry 3. rename(entry, "TEMPFILE"), then rename("TEMPFILE", entry) 4. loop 2~3, until readdir return nothing or we loop too many times(tmpfs break test with the second condition) We choose the same logic what commit 9b378f6ad48cf ("btrfs: fix infinite directory reads") to fix it, record the last_index when we open dir, and do not emit the entry which index >= last_index. The file->private_data now used in offset dir can use directly to do this, and we also update the last_index when we llseek the dir file. [brauner: only update last_index after seek when offset is zero like Jan suggested]

In the Linux kernel, the following vulnerability has been resolved: Input: uinput - reject requests with unreasonable number of slots When exercising uinput interface syzkaller may try setting up device with a really large number of slots, which causes memory allocation failure in input_mt_init_slots(). While this allocation failure is handled properly and request is rejected, it results in syzkaller reports. Additionally, such request may put undue burden on the system which will try to free a lot of memory for a bogus request. Fix it by limiting allowed number of slots to 100. This can easily be extended if we see devices that can track more than 100 contacts.

In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: fix kexec crash due to VP assist page corruption commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline") introduces a new cpuhp state for hyperv initialization. cpuhp_setup_state() returns the state number if state is CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states. For the hyperv case, since a new cpuhp state was introduced it would return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and so hv_cpu_die() won't be called on all CPUs. This means the VP assist page won't be reset. When the kexec kernel tries to setup the VP assist page again, the hypervisor corrupts the memory region of the old VP assist page causing a panic in case the kexec kernel is using that memory elsewhere. This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec panic/hang issues"). Get rid of hyperv_init_cpuhp entirely since we are no longer using a dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with cpuhp_remove_state().

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Disable coherent dumb buffers without 3d Coherent surfaces make only sense if the host renders to them using accelerated apis. Without 3d the entire content of dumb buffers stays in the guest making all of the extra work they're doing to synchronize between guest and host useless. Configurations without 3d also tend to run with very low graphics memory limits. The pinned console fb, mob cursors and graphical login manager tend to run out of 16MB graphics memory that those guests use. Fix it by making sure the coherent dumb buffers are only used on configs with 3d enabled.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add missing NULL pointer check within dpcd_extend_address_range [Why & How] ASSERT if return NULL from kcalloc.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: Check tbo resource pointer Validate tbo resource pointer, skip if NULL

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix dereference after null check check the pointer hive before use.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix firmware crash due to invalid peer nss Currently, if the access point receives an association request containing an Extended HE Capabilities Information Element with an invalid MCS-NSS, it triggers a firmware crash. This issue arises when EHT-PHY capabilities shows support for a bandwidth and MCS-NSS set for that particular bandwidth is filled by zeros and due to this, driver obtains peer_nss as 0 and sending this value to firmware causes crash. Address this issue by implementing a validation step for the peer_nss value before passing it to the firmware. If the value is greater than zero, proceed with forwarding it to the firmware. However, if the value is invalid, reject the association request to prevent potential firmware crashes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: bpf: Remove tst_run from lwt_seg6local_prog_ops. The syzbot reported that the lwt_seg6 related BPF ops can be invoked via bpf_test_run() without without entering input_action_end_bpf() first. Martin KaFai Lau said that self test for BPF_PROG_TYPE_LWT_SEG6LOCAL probably didn't work since it was introduced in commit 04d4b274e2a ("ipv6: sr: Add seg6local action End.BPF"). The reason is that the per-CPU variable seg6_bpf_srh_states::srh is never assigned in the self test case but each BPF function expects it. Remove test_run for BPF_PROG_TYPE_LWT_SEG6LOCAL.