Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 3 of 4).

Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 4 of 4).

Improper Input Validation vulnerability in the Apache Airflow Hive Provider. This issue affects Apache Airflow Hive Provider versions before 5.1.3.

NVIDIA DGX H100 BMC contains a vulnerability in IPMI, where an attacker may cause improper input validation. A successful exploit of this vulnerability may lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'network.ieee8021x.delete_certs'.

EMC VASA Provider Virtual Appliance versions 8.3.x and prior has an unauthenticated remote code execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

Multipart-file uploads call variables to be improperly registered in the global scope. In cases where variables are not declared explicitly before being used this can lead to unexpected behavior. This affects all supported versions of HHVM prior to the patch (3.25.1, 3.24.5, and 3.21.9 and below).

NVIDIA DGX H100 BMC contains a vulnerability in the KVM service, where an attacker may cause improper input validation. A successful exploit of this vulnerability may lead to code execution, denial of service, escalation of privileges, and information disclosure.

NVIDIA DGX H100 BMC contains a vulnerability in the web UI, where an attacker may cause improper input validation. A successful exploit of this vulnerability may lead to information disclosure, code execution, and escalation of privileges.

A vulnerability, which was classified as problematic, has been found in westboy CicadasCMS 1.0. This issue affects some unknown processing of the file /system of the component Template Management. The manipulation leads to deserialization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability of XPlatform could allow an unauthenticated attacker to execute arbitrary command. This vulnerability exists due to insufficient validation of improper classes. This issue affects: Tobesoft XPlatform versions prior to 9.2.2.280.

Improper Input Validation vulnerability in Apache IoTDB. This issue affects Apache IoTDB: from 1.0.0 before 1.3.7, from 2.0.0 before 2.0.7. Users are recommended to upgrade to version 1.3.7 or 2.0.7, which fixes the issue.

Improper Input Validation vulnerability in the Apache Airflow Sqoop Provider. This issue affects Apache Airflow Sqoop Provider versions before 3.1.1.

When using XPLATFORM 9.2.2.270 or earlier versions ActiveX component, arbitrary commands can be executed due to improper input validation

Improper Input Validation vulnerability in the Apache Airflow Google Provider. This issue affects Apache Airflow Google Provider versions before 8.10.0.

An issue was discovered on Askey AP4000W TDC_V1.01.003 devices. An attacker can perform Remote Code Execution (RCE) by sending a specially crafted network packer to the bd_svr service listening on TCP port 54188.

A vulnerability(improper input validation) in the ExECM CoreB2B solution allows an unauthenticated attacker to download and execute an arbitrary file via httpDownload function. A successful exploit could allow the attacker to hijack vulnerable system.

In MaEPSBroker 2.5.0.31 and prior, a command injection vulnerability caused by improper input validation checks when parsing brokerCommand parameter.

Flaw in input validation in npm package utils-extend version 1.0.8 and earlier may allow prototype pollution attack that may result in remote code execution or denial of service of applications using utils-extend.

In MB connect line mbDIALUP versions <= 3.9R0.0 a remote attacker can send a specifically crafted HTTP request to the service running with NT AUTHORITY\SYSTEM that will not correctly validate the input. This can lead to an arbitrary code execution with the privileges of the service.

An internal security review has identified an unauthenticated remote code execution vulnerability in Cloud Networking Operating System (CNOS)’ optional REST API management interface. This interface is disabled by default and not vulnerable unless enabled. When enabled, it is only vulnerable where attached to a VRF and as allowed by defined ACLs. Lenovo strongly recommends upgrading to a non-vulnerable CNOS release. Where not possible, Lenovo recommends disabling the REST API management interface or restricting access to the management VRF and further limiting access to authorized management stations via ACL.

A vulnerability of Helpcom could allow an unauthenticated attacker to execute arbitrary command. This vulnerability exists due to insufficient validation of the parameter. This issue affects: Cnesty Helpcom 10.0 versions prior to.

Improper Input Validation vulnerability in Mitsubishi Electric MELSEC-Q Series QJ71E71-100 first 5 digits of serial number "24061" or prior, Mitsubishi Electric MELSEC-L series LJ71E71-100 first 5 digits of serial number "24061" or prior and Mitsubishi Electric MELSEC iQ-R Series RD81MES96N firmware version "08" or prior allows a remote unauthenticated attacker to cause a denial of service (DoS) condition or execute malicious code on the target products by sending specially crafted packets.

Microsoft Outlook Elevation of Privilege Vulnerability

Nexacro14/17 ExtCommonApiV13 Library under 2019.9.6 version contain a vulnerability that could allow remote attacker to execute arbitrary code by modifying the value of registry path. This can be leveraged for code execution by rebooting the victim’s PC

Lack of input validation in pdf-image npm package version <= 2.0.0 may allow an attacker to run arbitrary code if PDF file path is constructed based on untrusted user input.

An issue was discovered on Samsung mobile devices with L(5.0/5.1) and M(6.0) software. SVoice allows provider seizure via an application that uses a custom provider. The Samsung ID is SVE-2016-6942 (February 2017).

An authorization bypass and PHP local-file-include vulnerability in the installation component of SugarCRM before 8.0, 8.0 before 8.0.7, 9.0 before 9.0.4, and 10.0 before 10.0.0 allows for unauthenticated remote code execution against a configured SugarCRM instance via crafted HTTP requests. (This is exploitable even after installation is completed.).

In FreeBSD 12.1-STABLE before r360971, 12.1-RELEASE before p5, 11.4-STABLE before r360971, 11.4-BETA1 before p1 and 11.3-RELEASE before p9, libalias does not properly validate packet length resulting in modules causing an out of bounds read/write condition if no checking was built into the module.

The Fox LMS – WordPress LMS Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 1.0.5.1. This is due to the plugin not properly validating the 'role' parameter when creating new users via the `/fox-lms/v1/payments/create-order` REST API endpoint. This makes it possible for unauthenticated attackers to create new user accounts with arbitrary roles, including administrator, leading to complete site compromise.

Git before 1.8.5.6, 1.9.x before 1.9.5, 2.0.x before 2.0.5, 2.1.x before 2.1.4, and 2.2.x before 2.2.1 on Windows and OS X; Mercurial before 3.2.3 on Windows and OS X; Apple Xcode before 6.2 beta 3; mine all versions before 08-12-2014; libgit2 all versions up to 0.21.2; Egit all versions before 08-12-2014; and JGit all versions before 08-12-2014 allow remote Git servers to execute arbitrary commands via a tree containing a crafted .git/config file with (1) an ignorable Unicode codepoint, (2) a git~1/config representation, or (3) mixed case that is improperly handled on a case-insensitive filesystem.

The papercrop gem before 0.3.0 for Ruby on Rails does not properly handle crop input.

The vfe31_proc_general function in drivers/media/video/msm/vfe/msm_vfe31.c in the MSM-VFE31 driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not validate a certain id value, which allows attackers to gain privileges or cause a denial of service (memory corruption) via an application that makes a crafted ioctl call.

An improper input validation vulnerability in the web server CGI facilities of FortiMail before 7.0.1 may allow an unauthenticated attacker to alter the environment of the underlying script interpreter via specifically crafted HTTP requests.

The WebAdmin Console in OpenLiteSpeed before v1.6.5 does not strictly check request URLs, as demonstrated by the "Server Configuration > External App" screen.

Rbot Reaction plugin allows command execution

IBM Spectrum Protect 7.1 and 8.1 server is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. This could allow a remote attacker to execute arbitrary code on the system with the privileges of an administrator or user associated with the Spectrum Protect server or cause the Spectrum Protect server to crash. IBM X-Force ID: 179990.

A memory corruption issue was addressed with improved input validation. This issue is fixed in macOS Catalina 10.15.3. A remote attacker may be able to cause unexpected application termination or arbitrary code execution.

Weak Configuration due to improper input validation in Modem while processing LTE security mode command message received from network.

Atlassian has been made aware of an issue reported by a handful of customers where external attackers may have exploited a previously unknown vulnerability in publicly accessible Confluence Data Center and Server instances to create unauthorized Confluence administrator accounts and access Confluence instances. Atlassian Cloud sites are not affected by this vulnerability. If your Confluence site is accessed via an atlassian.net domain, it is hosted by Atlassian and is not vulnerable to this issue.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175023.

A memory corruption issue was addressed with improved input validation. This issue is fixed in macOS Catalina 10.15.3. A remote attacker may be able to cause unexpected application termination or arbitrary code execution.