A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.  This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials. SNMP with IPv6 ACL configurations is not affected. For more information, see the section of this advisory.

A vulnerability has been found in keerti1924 PHP-MYSQL-User-Login-System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /edit.php. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-254389 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in CodeAstro Simple Voting System 1.0. Affected by this vulnerability is an unknown functionality of the file users.php of the component Backend. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-254611.

A vulnerability was found in DeShang DSKMS up to 3.1.2. It has been rated as problematic. This issue affects some unknown processing of the file public/install.php. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-250433 was assigned to this vulnerability.

A vulnerability classified as problematic has been found in DeShang DSCMS up to 3.1.2/7.1. Affected is an unknown function of the file public/install.php. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-250434 is the identifier assigned to this vulnerability.

The Enfold theme for WordPress is vulnerable to unauthorized access of data due to a missing capability check in avia-export-class.php in all versions up to, and including, 6.0.9. This makes it possible for unauthenticated attackers to export all avia settings which may included sensitive information such as the Mailchimp API Key, reCAPTCHA Secret Key, or Envato private token if they are set.

The Event Tickets and Registration plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.18.1 via the tc-order-id parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to view order details of orders they did not place, which includes ticket prices, user emails and order date.

A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/form2IPQoSTcAdd of the component IP QoS Handler. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Intelbras VIP S3020 G2, VIP S4020 G2, VIP S4020 G3 and VIP S4320 G2 up to 20241222 and classified as problematic. Affected by this issue is some unknown functionality of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor assesses that "the information disclosed in the URL is not sensitive or poses any risk to the user".

A vulnerability classified as problematic has been found in Amcrest IP2M-841B, IP2M-841W, IPC-IP2M-841B, IPC-IP3M-943B, IPC-IP3M-943S, IPC-IP3M-HX2B and IPC-IPM-721S up to 20241211. This affects an unknown part of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. Affected is an unknown function of the file /goform/form2AdvanceSetup.cgi of the component WiFi Settings Handler. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/form2Dhcpd.cgi of the component DHCPD Setting Handler. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

The WP Hotel Booking plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check when adding rooms in all versions up to, and including, 2.1.5. This makes it possible for unauthenticated attackers to add rooms with custom prices.

A vulnerability was found in CodeAstro Online Food Ordering System 1.0 and classified as critical. This issue affects some unknown processing of the file /admin/all_users.php of the component All Users Page. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. It has been declared as critical. This vulnerability affects unknown code of the file /goform/form2NetSniper.cgi. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. It has been classified as critical. This affects an unknown part of the file /goform/form2LocalAclEditcfg.cgi of the component ACL Handler. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A broken access control vulnerability in the SubNet_handler_func function of spx_restservice allows an attacker to arbitrarily change the security access rights to KVM and Virtual Media functionalities. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

The Last Viewed Posts by WPBeginner plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.1 via the 'get_legacy_cookies' function. This makes it possible for unauthenticated attackers to extract sensitive data including titles and permalinks of private, password-protected, pending, and draft posts.

A vulnerability, which was classified as critical, has been found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. This issue affects some unknown processing of the file /goform/form2AddVrtsrv.cgi of the component Virtual Service Handler. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The LearnPress – WordPress LMS Plugin plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.2.7.3 via class-lp-rest-material-controller.php. This makes it possible for unauthenticated attackers to extract potentially sensitive paid course material.

A vulnerability was found in Guangzhou Huayi Intelligent Technology Jeewms 3.7. It has been rated as problematic. This issue affects the function preHandle of the file src/main/java/com/zzjee/wm/controller/WmOmNoticeHController.java. The manipulation of the argument request leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The Related Posts, Inline Related Posts, Contextual Related Posts, Related Content By PickPlugins plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.0.58 via the wp_ajax_nopriv_related_post_ajax_get_post_ids AJAX action. This makes it possible for unauthenticated attackers to extract sensitive data including titles of posts in draft status.

The Tutor LMS plugin for WordPress is vulnerable to bypass to user registration in versions up to, and including, 2.7.6. This is due to a missing check for the 'users_can_register' option in the 'register_instructor' function. This makes it possible for unauthenticated attackers to register as the default role on the site, even if registration is disabled.

A vulnerability classified as problematic has been found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. This affects an unknown part of the file /xml/info.xml of the component HTTP GET Request Handler. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Improper access control vulnerability in DofViewer prior to SMR Jun-2022 Release 1 allows attackers to control floating system alert window.

A vulnerability was found in DeShang DSO2O up to 4.1.0. It has been classified as critical. This affects an unknown part of the file /install/install.php. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-250125 was assigned to this vulnerability.

A vulnerability was found in DeShang DSMall up to 6.1.0. It has been classified as problematic. This affects an unknown part of the file public/install.php of the component HTTP GET Request Handler. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250431.

A vulnerability classified as problematic has been found in Totolink T6 4.1.9cu.5241_B20210923. This affects an unknown part of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249867. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Unspecified vulnerability in Oracle Java SE 6u101, 7u85, and 8u60 allows remote attackers to affect integrity via unknown vectors related to Deployment.

A vulnerability was found in Thecosy IceCMS 2.0.1. It has been rated as critical. Affected by this issue is some unknown functionality of the file /adplanet/PlanetCommentList of the component API. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-247886 is the identifier assigned to this vulnerability.

The EventPrime WordPress plugin before 3.3.6 lacks authentication and authorization, allowing unauthenticated visitors to access private and password protected Events by guessing their numeric id/event name.

Insufficient web service capability checks made it possible to move categories a user had permission to manage, to a parent category they did not have the capability to manage.

The web interface of the 1734-AENTR communication module mishandles authentication for HTTP POST requests. A remote, unauthenticated attacker can send a crafted request that may allow for modification of the configuration settings.

A vulnerability in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. This vulnerability is due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit this vulnerability by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should trigger and drop for the ENIP packet.

An improper access control (CWE-284) vulnerability in FortiWLC version 8.6.0, version 8.5.3 and below, version 8.4.8 and below, version 8.3.3 and below, version 8.2.7 to 8.2.4, version 8.1.3 may allow an unauthenticated and remote attacker to access certain areas of the web management CGI functionality by just specifying the correct URL. The vulnerability applies only to limited CGI resources and might allow the unauthorized party to access configuration details.

Adobe Experience Manager versions 6.5.18 and earlier are affected by an Improper Access Control vulnerability. An attacker could leverage this vulnerability to achieve a low-confidentiality impact within the application. Exploitation of this issue does not require user interaction.

Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause arbitrary webpage loading in webview.

Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause local file inclusion in webview.

blockreassurance adds an information block aimed at offering helpful information to reassure customers that their store is trustworthy. An ajax function in module blockreassurance allows modifying any value in the configuration table. This vulnerability has been patched in version 5.1.4.

The Plus Addons for Elementor Page Builder WordPress plugin before 4.1.11 did not properly check that a user requesting a password reset was the legitimate user, allowing an attacker to send an arbitrary reset password email to a registered user on behalf of the WordPress site. Such issue could be chained with an open redirect (CVE-2021-24358) in version below 4.1.10, to include a crafted password reset link in the email, which would lead to an account takeover.

An improper access control vulnerability [CWE-284] in FortiOS version 7.2.0, version 7.0.13 and below, version 6.4.14 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below may allow a remote unauthenticated attacker to bypass the firewall deny geolocalisation policy via timing the bypass with a GeoIP database update.

A vulnerability in the email filtering mechanism of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to bypass the configured rules and allow emails that should have been denied to flow through an affected device.   This vulnerability is due to improper handling of email that passes through an affected device. An attacker could exploit this vulnerability by sending a crafted email through the affected device. A successful exploit could allow the attacker to bypass email filters on the affected device.

The Thrive Optimize WordPress plugin before 1.4.13.3, Thrive Comments WordPress plugin before 1.4.15.3, Thrive Headline Optimizer WordPress plugin before 1.3.7.3, Thrive Leads WordPress plugin before 2.3.9.4, Thrive Ultimatum WordPress plugin before 2.3.9.4, Thrive Quiz Builder WordPress plugin before 2.3.9.4, Thrive Apprentice WordPress plugin before 2.3.9.4, Thrive Visual Editor WordPress plugin before 2.6.7.4, Thrive Dashboard WordPress plugin before 2.3.9.3, Thrive Ovation WordPress plugin before 2.4.5, Thrive Clever Widgets WordPress plugin before 1.57.1 and Rise by Thrive Themes WordPress theme before 2.0.0, Ignition by Thrive Themes WordPress theme before 2.0.0, Luxe by Thrive Themes WordPress theme before 2.0.0, FocusBlog by Thrive Themes WordPress theme before 2.0.0, Minus by Thrive Themes WordPress theme before 2.0.0, Squared by Thrive Themes WordPress theme before 2.0.0, Voice WordPress theme before 2.0.0, Performag by Thrive Themes WordPress theme before 2.0.0, Pressive by Thrive Themes WordPress theme before 2.0.0, Storied by Thrive Themes WordPress theme before 2.0.0, Thrive Themes Builder WordPress theme before 2.2.4 register a REST API endpoint associated with Zapier functionality. While this endpoint was intended to require an API key in order to access, it was possible to access it by supplying an empty api_key parameter in vulnerable versions if Zapier was not enabled. Attackers could use this endpoint to add arbitrary data to a predefined option in the wp_options table.

An information disclosure vulnerability exists in the web interface /cgi-bin/download_config.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to a disclosure of sensitive information. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 allow any user to obtain the presentation passcode via the iso.3.6.1.4.1.3212.100.3.2.7.4 OIDs. A remote, unauthenticated attacker can use this vulnerability to access a restricted presentation or to become the presenter.

A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface.

An information disclosure vulnerability exists in the web interface /cgi-bin/debug_dump.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to a disclosure of sensitive information. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

A vulnerability in the Local Packet Transport Services (LPTS) programming of the SNMP with the management plane protection feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to allow connections despite the management plane protection that is configured to deny access to the SNMP server of an affected device. This vulnerability is due to incorrect LPTS programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by connecting to an affected device using SNMP. A successful exploit could allow the attacker to connect to the device on the configured SNMP ports. Valid credentials are required to execute any of the SNMP requests.

NAVER Whale browser mobile app before 1.10.6.2 allows the attacker to bypass its browser unlock function via incognito mode.

BD Alaris Gateway versions, 1.0.13,1.1.3 Build 10,1.1.3 MR Build 11,1.1.5, and 1.1.6, The web browser user interface on the Alaris Gateway Workstation does not prevent an attacker with knowledge of the IP address of the Alaris Gateway Workstation terminal to gain access to the status and configuration information of the device.