In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: use dma non-coherent allocator Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

In the Linux kernel, the following vulnerability has been resolved: fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix deadlock during RTC update There is a deadlock when runtime suspend waits for the flush of RTC work, and the RTC work calls ufshcd_rpm_get_sync() to wait for runtime resume. Here is deadlock backtrace: kworker/0:1 D 4892.876354 10 10971 4859 0x4208060 0x8 10 0 120 670730152367 ptr f0ffff80c2e40000 0 1 0x00000001 0x000000ff 0x000000ff 0x000000ff <ffffffee5e71ddb0> __switch_to+0x1a8/0x2d4 <ffffffee5e71e604> __schedule+0x684/0xa98 <ffffffee5e71ea60> schedule+0x48/0xc8 <ffffffee5e725f78> schedule_timeout+0x48/0x170 <ffffffee5e71fb74> do_wait_for_common+0x108/0x1b0 <ffffffee5e71efe0> wait_for_completion+0x44/0x60 <ffffffee5d6de968> __flush_work+0x39c/0x424 <ffffffee5d6decc0> __cancel_work_sync+0xd8/0x208 <ffffffee5d6dee2c> cancel_delayed_work_sync+0x14/0x28 <ffffffee5e2551b8> __ufshcd_wl_suspend+0x19c/0x480 <ffffffee5e255fb8> ufshcd_wl_runtime_suspend+0x3c/0x1d4 <ffffffee5dffd80c> scsi_runtime_suspend+0x78/0xc8 <ffffffee5df93580> __rpm_callback+0x94/0x3e0 <ffffffee5df90b0c> rpm_suspend+0x2d4/0x65c <ffffffee5df91448> __pm_runtime_suspend+0x80/0x114 <ffffffee5dffd95c> scsi_runtime_idle+0x38/0x6c <ffffffee5df912f4> rpm_idle+0x264/0x338 <ffffffee5df90f14> __pm_runtime_idle+0x80/0x110 <ffffffee5e24ce44> ufshcd_rtc_work+0x128/0x1e4 <ffffffee5d6e3a40> process_one_work+0x26c/0x650 <ffffffee5d6e65c8> worker_thread+0x260/0x3d8 <ffffffee5d6edec8> kthread+0x110/0x134 <ffffffee5d616b18> ret_from_fork+0x10/0x20 Skip updating RTC if RPM state is not RPM_ACTIVE.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup() If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop up the damage. If it fails early enough, before xhci->interrupters is allocated but after xhci->max_interrupters has been set, which happens in most (all?) cases, things get uglier, as xhci_mem_cleanup() unconditionally derefences xhci->interrupters. With prejudice. Gate the interrupt freeing loop with a check on xhci->interrupters being non-NULL. Found while debugging a DMA allocation issue that led the XHCI driver on this exact path.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix RX buf alloc_size alignment and atomic op panic The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0

In the Linux kernel, the following vulnerability has been resolved: fscrypt: stop using keyrings subsystem for fscrypt_master_key The approach of fs/crypto/ internally managing the fscrypt_master_key structs as the payloads of "struct key" objects contained in a "struct key" keyring has outlived its usefulness. The original idea was to simplify the code by reusing code from the keyrings subsystem. However, several issues have arisen that can't easily be resolved: - When a master key struct is destroyed, blk_crypto_evict_key() must be called on any per-mode keys embedded in it. (This started being the case when inline encryption support was added.) Yet, the keyrings subsystem can arbitrarily delay the destruction of keys, even past the time the filesystem was unmounted. Therefore, currently there is no easy way to call blk_crypto_evict_key() when a master key is destroyed. Currently, this is worked around by holding an extra reference to the filesystem's request_queue(s). But it was overlooked that the request_queue reference is *not* guaranteed to pin the corresponding blk_crypto_profile too; for device-mapper devices that support inline crypto, it doesn't. This can cause a use-after-free. - When the last inode that was using an incompletely-removed master key is evicted, the master key removal is completed by removing the key struct from the keyring. Currently this is done via key_invalidate(). Yet, key_invalidate() takes the key semaphore. This can deadlock when called from the shrinker, since in fscrypt_ioctl_add_key(), memory is allocated with GFP_KERNEL under the same semaphore. - More generally, the fact that the keyrings subsystem can arbitrarily delay the destruction of keys (via garbage collection delay, or via random processes getting temporary key references) is undesirable, as it means we can't strictly guarantee that all secrets are ever wiped. - Doing the master key lookups via the keyrings subsystem results in the key_permission LSM hook being called. fscrypt doesn't want this, as all access control for encrypted files is designed to happen via the files themselves, like any other files. The workaround which SELinux users are using is to change their SELinux policy to grant key search access to all domains. This works, but it is an odd extra step that shouldn't really have to be done. The fix for all these issues is to change the implementation to what I should have done originally: don't use the keyrings subsystem to keep track of the filesystem's fscrypt_master_key structs. Instead, just store them in a regular kernel data structure, and rework the reference counting, locking, and lifetime accordingly. Retain support for RCU-mode key lookups by using a hash table. Replace fscrypt_sb_free() with fscrypt_sb_delete(), which releases the keys synchronously and runs a bit earlier during unmount, so that block devices are still available. A side effect of this patch is that neither the master keys themselves nor the filesystem keyrings will be listed in /proc/keys anymore. ("Master key users" and the master key users keyrings will still be listed.) However, this was mostly an implementation detail, and it was intended just for debugging purposes. I don't know of anyone using it. This patch does *not* change how "master key users" (->mk_users) works; that still uses the keyrings subsystem. That is still needed for key quotas, and changing that isn't necessary to solve the issues listed above. If we decide to change that too, it would be a separate patch. I've marked this as fixing the original commit that added the fscrypt keyring, but as noted above the most important issue that this patch fixes wasn't introduced until the addition of inline encryption support.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails If the dpu_format_populate_layout() fails, then FB is prepared, but not cleaned up. This ends up leaking the pin_count on the GEM object and causes a splat during DRM file closure: msm_obj->pin_count WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc [...] Call trace: update_lru_locked+0xc4/0xcc put_pages+0xac/0x100 msm_gem_free_object+0x138/0x180 drm_gem_object_free+0x1c/0x30 drm_gem_object_handle_put_unlocked+0x108/0x10c drm_gem_object_release_handle+0x58/0x70 idr_for_each+0x68/0xec drm_gem_release+0x28/0x40 drm_file_free+0x174/0x234 drm_release+0xb0/0x160 __fput+0xc0/0x2c8 __fput_sync+0x50/0x5c __arm64_sys_close+0x38/0x7c invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x120 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 irq event stamp: 129818 hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124 hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8 softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20 Patchwork: https://patchwork.freedesktop.org/patch/600714/

In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: Do not mark ACPI devices as irq safe On ACPI machines, the tegra i2c module encounters an issue due to a mutex being called inside a spinlock. This leads to the following bug: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 ... Call trace: __might_sleep __mutex_lock_common mutex_lock_nested acpi_subsys_runtime_resume rpm_resume tegra_i2c_xfer The problem arises because during __pm_runtime_resume(), the spinlock &dev->power.lock is acquired before rpm_resume() is called. Later, rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on mutexes, triggering the error. To address this issue, devices on ACPI are now marked as not IRQ-safe, considering the dependency of acpi_subsys_runtime_resume() on mutexes.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before.

A vulnerability has been found in Linux Kernel and classified as problematic. This vulnerability affects the function jlink_init of the file monitor/jlink.c of the component BlueZ. The manipulation leads to denial of service. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211936.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix missing workqueue destroy in xe_gt_pagefault On driver reload we never free up the memory for the pagefault and access counter workqueues. Add those destroy calls here. (cherry picked from commit 7586fc52b14e0b8edd0d1f8a434e0de2078b7b2b)

In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer problem in free_mr_init() Lock grab occurs in a concurrent scenario, resulting in stepping on a NULL pointer. It should be init mutex_init() first before use the lock. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __mutex_lock.constprop.0+0xd0/0x5c0 __mutex_lock_slowpath+0x1c/0x2c mutex_lock+0x44/0x50 free_mr_send_cmd_to_hw+0x7c/0x1c0 [hns_roce_hw_v2] hns_roce_v2_dereg_mr+0x30/0x40 [hns_roce_hw_v2] hns_roce_dereg_mr+0x4c/0x130 [hns_roce_hw_v2] ib_dereg_mr_user+0x54/0x124 uverbs_free_mr+0x24/0x30 destroy_hw_idr_uobject+0x38/0x74 uverbs_destroy_uobject+0x48/0x1c4 uobj_destroy+0x74/0xcc ib_uverbs_cmd_verbs+0x368/0xbb0 ib_uverbs_ioctl+0xec/0x1a4 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x190 do_el0_svc+0x30/0x90 el0_svc+0x2c/0xb4 el0t_64_sync_handler+0x1a4/0x1b0 el0t_64_sync+0x19c/0x1a0

In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Switch from mutex to spinlock for irqfds irqfd_wakeup() gets EPOLLHUP, when it is called by eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which gets called under spin_lock_irqsave(). We can't use a mutex here as it will lead to a deadlock. Fix it by switching over to a spin lock.

A vulnerability was found in Linux Kernel. It has been rated as problematic. This issue affects some unknown processing of the file fs/fscache/cookie.c of the component IPsec. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211931.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags [WHAT & HOW] "dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it cannot be a null pointer. Let's pass a valid pointer to avoid null dereference. This fixes 2 FORWARD_NULL issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount.

In the Linux kernel, the following vulnerability has been resolved: capabilities: fix potential memleak on error path from vfs_getxattr_alloc() In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to complete the memory allocation of tmpbuf, if we have completed the memory allocation of tmpbuf, but failed to call handler->get(...), there will be a memleak in below logic: |-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...) | /* ^^^ alloc for tmpbuf */ |-- value = krealloc(*xattr_value, error + 1, flags) | /* ^^^ alloc memory */ |-- error = handler->get(handler, ...) | /* error! */ |-- *xattr_value = value | /* xattr_value is &tmpbuf (memory leak!) */ So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it. [PM: subject line and backtrace tweaks]

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace.

In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid possible NULL dereference in cifs_free_subrequest() Clang static checker (scan-build) warning: cifsglob.h:line 890, column 3 Access to field 'ops' results in a dereference of a null pointer. Commit 519be989717c ("cifs: Add a tracepoint to track credits involved in R/W requests") adds a check for 'rdata->server', and let clang throw this warning about NULL dereference. When 'rdata->credits.value != 0 && rdata->server == NULL' happens, add_credits_and_wake_if() will call rdata->server->ops->add_credits(). This will cause NULL dereference problem. Add a check for 'rdata->server' to avoid NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: mm, slub: do not call do_slab_free for kfence object In 782f8906f805 the freeing of kfence objects was moved from deep inside do_slab_free to the wrapper functions outside. This is a nice change, but unfortunately it missed one spot in __kmem_cache_free_bulk. This results in a crash like this: BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840 slab_err (mm/slub.c:1129) free_to_partial_list (mm/slub.c:? mm/slub.c:4036) slab_pad_check (mm/slub.c:864 mm/slub.c:1290) check_slab (mm/slub.c:?) free_to_partial_list (mm/slub.c:3171 mm/slub.c:4036) kmem_cache_alloc_bulk (mm/slub.c:? mm/slub.c:4495 mm/slub.c:4586 mm/slub.c:4635) napi_build_skb (net/core/skbuff.c:348 net/core/skbuff.c:527 net/core/skbuff.c:549) All the other callers to do_slab_free appear to be ok. Add a kfence_free check in __kmem_cache_free_bulk to avoid the crash.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON() when freeing tree block after error When freeing a tree block, at btrfs_free_tree_block(), if we fail to create a delayed reference we don't deal with the error and just do a BUG_ON(). The error most likely to happen is -ENOMEM, and we have a comment mentioning that only -ENOMEM can happen, but that is not true, because in case qgroups are enabled any error returned from btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned from btrfs_search_slot() for example) can be propagated back to btrfs_free_tree_block(). So stop doing a BUG_ON() and return the error to the callers and make them abort the transaction to prevent leaking space. Syzbot was triggering this, likely due to memory allocation failure injection.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not clear page dirty inside extent_write_locked_range() [BUG] For subpage + zoned case, the following workload can lead to rsv data leak at unmount time: # mkfs.btrfs -f -s 4k $dev # mount $dev $mnt # fsstress -w -n 8 -d $mnt -s 1709539240 0/0: fiemap - no filename 0/1: copyrange read - no filename 0/2: write - no filename 0/3: rename - no source filename 0/4: creat f0 x:0 0 0 0/4: creat add id=0,parent=-1 0/5: writev f0[259 1 0 0 0 0] [778052,113,965] 0 0/6: ioctl(FIEMAP) f0[259 1 0 0 224 887097] [1294220,2291618343991484791,0x10000] -1 0/7: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 224 887097] return 25, fallback to stat() 0/7: dwrite f0[259 1 0 0 224 887097] [696320,102400] 0 # umount $mnt The dmesg includes the following rsv leak detection warning (all call trace skipped): ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8653 btrfs_destroy_inode+0x1e0/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8654 btrfs_destroy_inode+0x1a8/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8660 btrfs_destroy_inode+0x1a0/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): last unmount of filesystem 1b4abba9-de34-4f07-9e7f-157cf12a18d6 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): space_info DATA has 268218368 free, is not full BTRFS info (device sda): space_info total=268435456, used=204800, pinned=0, reserved=0, may_use=12288, readonly=0 zone_unusable=0 BTRFS info (device sda): global_block_rsv: size 0 reserved 0 BTRFS info (device sda): trans_block_rsv: size 0 reserved 0 BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): space_info METADATA has 267796480 free, is not full BTRFS info (device sda): space_info total=268435456, used=131072, pinned=0, reserved=0, may_use=262144, readonly=0 zone_unusable=245760 BTRFS info (device sda): global_block_rsv: size 0 reserved 0 BTRFS info (device sda): trans_block_rsv: size 0 reserved 0 BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0 Above $dev is a tcmu-runner emulated zoned HDD, which has a max zone append size of 64K, and the system has 64K page size. [CAUSE] I have added several trace_printk() to show the events (header skipped): > btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688 > btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288 > btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536 > btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864 The above lines show our buffered write has dirtied 3 pages of inode 259 of root 5: 704K 768K 832K 896K I |////I/////////////////I///////////| I 756K 868K |///| is the dirtied range using subpage bitmaps. and 'I' is the page boundary. Meanwhile all three pages (704K, 768K, 832K) have their PageDirty flag set. > btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400 Then direct IO writ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm: gup: stop abusing try_grab_folio A kernel warning was reported when pinning folio in CMA memory when launching SEV virtual machine. The splat looks like: [ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520 [ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6 [ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520 [ 464.325515] Call Trace: [ 464.325520] <TASK> [ 464.325523] ? __get_user_pages+0x423/0x520 [ 464.325528] ? __warn+0x81/0x130 [ 464.325536] ? __get_user_pages+0x423/0x520 [ 464.325541] ? report_bug+0x171/0x1a0 [ 464.325549] ? handle_bug+0x3c/0x70 [ 464.325554] ? exc_invalid_op+0x17/0x70 [ 464.325558] ? asm_exc_invalid_op+0x1a/0x20 [ 464.325567] ? __get_user_pages+0x423/0x520 [ 464.325575] __gup_longterm_locked+0x212/0x7a0 [ 464.325583] internal_get_user_pages_fast+0xfb/0x190 [ 464.325590] pin_user_pages_fast+0x47/0x60 [ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd] [ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd] Per the analysis done by yangge, when starting the SEV virtual machine, it will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory. But the page is in CMA area, so fast GUP will fail then fallback to the slow path due to the longterm pinnalbe check in try_grab_folio(). The slow path will try to pin the pages then migrate them out of CMA area. But the slow path also uses try_grab_folio() to pin the page, it will also fail due to the same check then the above warning is triggered. In addition, the try_grab_folio() is supposed to be used in fast path and it elevates folio refcount by using add ref unless zero. We are guaranteed to have at least one stable reference in slow path, so the simple atomic add could be used. The performance difference should be trivial, but the misuse may be confusing and misleading. Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page() to try_grab_folio(), and use them in the proper paths. This solves both the abuse and the kernel warning. The proper naming makes their usecase more clear and should prevent from abusing in the future. peterx said: : The user will see the pin fails, for gpu-slow it further triggers the WARN : right below that failure (as in the original report): : : folio = try_grab_folio(page, page_increm - 1, : foll_flags); : if (WARN_ON_ONCE(!folio)) { <------------------------ here : /* : * Release the 1st page ref if the : * folio is problematic, fail hard. : */ : gup_put_folio(page_folio(page), 1, : foll_flags); : ret = -EFAULT; : goto out; : } [1] https://lore.kernel.org/linux-mm/1719478388-31917-1-git-send-email-yangge1116@126.com/ [shy828301@gmail.com: fix implicit declaration of function try_grab_folio_fast]

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a kernel verifier crash in stacksafe() Daniel Hodges reported a kernel verifier crash when playing with sched-ext. Further investigation shows that the crash is due to invalid memory access in stacksafe(). More specifically, it is the following code: if (exact != NOT_EXACT && old->stack[spi].slot_type[i % BPF_REG_SIZE] != cur->stack[spi].slot_type[i % BPF_REG_SIZE]) return false; The 'i' iterates old->allocated_stack. If cur->allocated_stack < old->allocated_stack the out-of-bound access will happen. To fix the issue add 'i >= cur->allocated_stack' check such that if the condition is true, stacksafe() should fail. Otherwise, cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal.

In the Linux kernel, the following vulnerability has been resolved: power: supply: rt5033: Bring back i2c_set_clientdata Commit 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper") reworked the driver to use devm. While at it, the i2c_set_clientdata was dropped along with the remove callback. Unfortunately other parts of the driver also rely on i2c clientdata so this causes kernel oops. Bring the call back to fix the driver.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401 When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] <TASK> [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function.

In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure.

A vulnerability, which was classified as problematic, has been found in Linux Kernel. This issue affects the function unix_sock_destructor/unix_release_sock of the file net/unix/af_unix.c of the component BPF. The manipulation leads to memory leak. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-211043.

In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix NULL pointer dereference in adding ancillary links In v4l2_async_create_ancillary_links(), ancillary links are created for lens and flash sub-devices. These are sub-device to sub-device links and if the async notifier is related to a V4L2 device, the source sub-device of the ancillary link is NULL, leading to a NULL pointer dereference. Check the notifier's sd field is non-NULL in v4l2_async_create_ancillary_links(). [Sakari Ailus: Reword the subject and commit messages slightly.]

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: wow: fix GTK offload H2C skbuff issue We mistakenly put skb too large and that may exceed skb->end. Therefore, we fix it. skbuff: skb_over_panic: text:ffffffffc09e9a9d len:416 put:204 head:ffff8fba04eca780 data:ffff8fba04eca7e0 tail:0x200 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 4747 Comm: kworker/u4:44 Tainted: G O 6.6.30-02659-gc18865c4dfbd #1 86547039b47e46935493f615ee31d0b2d711d35e Hardware name: HP Meep/Meep, BIOS Google_Meep.11297.262.0 03/18/2021 Workqueue: events_unbound async_run_entry_fn RIP: 0010:skb_panic+0x5d/0x60 Code: c6 63 8b 8f bb 4c 0f 45 f6 48 c7 c7 4d 89 8b bb 48 89 ce 44 89 d1 41 56 53 41 53 ff b0 c8 00 00 00 e8 27 5f 23 00 48 83 c4 20 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 RSP: 0018:ffffaa700144bad0 EFLAGS: 00010282 RAX: 0000000000000089 RBX: 0000000000000140 RCX: 14432c5aad26c900 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffaa700144bae0 R08: 0000000000000000 R09: ffffaa700144b920 R10: 00000000ffffdfff R11: ffffffffbc28fbc0 R12: ffff8fba4e57a010 R13: 0000000000000000 R14: ffffffffbb8f8b63 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8fba7bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007999c4ad1000 CR3: 000000015503a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? skb_panic+0x5d/0x60 ? do_error_trap+0x6d/0x90 ? skb_panic+0x5d/0x60 ? handle_invalid_op+0x30/0x40 ? skb_panic+0x5d/0x60 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? skb_panic+0x5d/0x60 skb_put+0x49/0x50 rtw89_fw_h2c_wow_gtk_ofld+0xbd/0x220 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] rtw89_wow_resume+0x31f/0x540 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] rtw89_ops_resume+0x2b/0xa0 [rtw89_core 778b32de31cd1f14df2d6721ae99ba8a83636fa5] ieee80211_reconfig+0x84/0x13e0 [mac80211 818a894e3b77da6298269c59ed7cdff065a4ed52] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] ? dev_printk_emit+0x51/0x70 ? _dev_info+0x6e/0x90 ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] wiphy_resume+0x89/0x180 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 1a793119e2aeb157c4ca4091ff8e1d9ae233b59d] dpm_run_callback+0x3c/0x140 device_resume+0x1f9/0x3c0 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x29/0xd0 process_scheduled_works+0x1d8/0x3d0 worker_thread+0x1fc/0x2f0 kthread+0xed/0x110 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: ccm 8021q r8153_ecm cdc_ether usbnet r8152 mii dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc uinput rfcomm cmac algif_hash rtw89_8922ae(O) algif_skcipher rtw89_8922a(O) af_alg rtw89_pci(O) rtw89_core(O) btusb(O) snd_soc_sst_bxt_da7219_max98357a btbcm(O) snd_soc_hdac_hdmi btintel(O) snd_soc_intel_hda_dsp_common snd_sof_probes btrtl(O) btmtk(O) snd_hda_codec_hdmi snd_soc_dmic uvcvideo videobuf2_vmalloc uvc videobuf2_memops videobuf2_v4l2 videobuf2_common snd_sof_pci_intel_apl snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda soundwire_intel soundwire_generic_allocation snd_sof_intel_hda_mlink soundwire_cadence snd_sof_pci snd_sof_xtensa_dsp mac80211 snd_soc_acpi_intel_match snd_soc_acpi snd_sof snd_sof_utils soundwire_bus snd_soc_max98357a snd_soc_avs snd_soc_hda_codec snd_hda_ext_core snd_intel_dspcfg snd_intel_sdw_acpi snd_soc_da7219 snd_hda_codec snd_hwdep snd_hda_core veth ip6table_nat xt_MASQUERADE xt_cgroup fuse bluetooth ecdh_generic cfg80211 ecc gsmi: Log Shutdown ---truncated---

A flaw double-free memory corruption in the Linux kernel HCI device initialization subsystem was found in the way user attach malicious HCI TTY Bluetooth device. A local user could use this flaw to crash the system. This flaw affects all the Linux kernel versions starting from 3.13.

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Free rwi on reset success Free the rwi structure in the event that the last rwi in the list processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets") introduces an issue that results in a 32 byte memory leak whenever the last rwi in the list gets processed.

A flaw was found in the Linux kernel’s networking code. A use-after-free was found in the way the sch_sfb enqueue function used the socket buffer (SKB) cb field after the same SKB had been enqueued (and freed) into a child qdisc. This flaw allows a local, unprivileged user to crash the system, causing a denial of service.

In the Linux kernel, the following vulnerability has been resolved: xdp: fix invalid wait context of page_pool_destroy() If the driver uses a page pool, it creates a page pool with page_pool_create(). The reference count of page pool is 1 as default. A page pool will be destroyed only when a reference count reaches 0. page_pool_destroy() is used to destroy page pool, it decreases a reference count. When a page pool is destroyed, ->disconnect() is called, which is mem_allocator_disconnect(). This function internally acquires mutex_lock(). If the driver uses XDP, it registers a memory model with xdp_rxq_info_reg_mem_model(). The xdp_rxq_info_reg_mem_model() internally increases a page pool reference count if a memory model is a page pool. Now the reference count is 2. To destroy a page pool, the driver should call both page_pool_destroy() and xdp_unreg_mem_model(). The xdp_unreg_mem_model() internally calls page_pool_destroy(). Only page_pool_destroy() decreases a reference count. If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we will face an invalid wait context warning. Because xdp_unreg_mem_model() calls page_pool_destroy() with rcu_read_lock(). The page_pool_destroy() internally acquires mutex_lock(). Splat looks like: ============================= [ BUG: Invalid wait context ] 6.10.0-rc6+ #4 Tainted: G W ----------------------------- ethtool/1806 is trying to lock: ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150 other info that might help us debug this: context-{5:5} 3 locks held by ethtool/1806: stack backtrace: CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 __lock_acquire+0x1681/0x4de0 ? _printk+0x64/0xe0 ? __pfx_mark_lock.part.0+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x1b3/0x580 ? mem_allocator_disconnect+0x73/0x150 ? __wake_up_klogd.part.0+0x16/0xc0 ? __pfx_lock_acquire+0x10/0x10 ? dump_stack_lvl+0x91/0xc0 __mutex_lock+0x15c/0x1690 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_prb_read_valid+0x10/0x10 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_llist_add_batch+0x10/0x10 ? console_unlock+0x193/0x1b0 ? lockdep_hardirqs_on+0xbe/0x140 ? __pfx___mutex_lock+0x10/0x10 ? tick_nohz_tick_stopped+0x16/0x90 ? __irq_work_queue_local+0x1e5/0x330 ? irq_work_queue+0x39/0x50 ? __wake_up_klogd.part.0+0x79/0xc0 ? mem_allocator_disconnect+0x73/0x150 mem_allocator_disconnect+0x73/0x150 ? __pfx_mem_allocator_disconnect+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? rcu_is_watching+0x11/0xb0 page_pool_release+0x36e/0x6d0 page_pool_destroy+0xd7/0x440 xdp_unreg_mem_model+0x1a7/0x2a0 ? __pfx_xdp_unreg_mem_model+0x10/0x10 ? kfree+0x125/0x370 ? bnxt_free_ring.isra.0+0x2eb/0x500 ? bnxt_free_mem+0x5ac/0x2500 xdp_rxq_info_unreg+0x4a/0xd0 bnxt_free_mem+0x1356/0x2500 bnxt_close_nic+0xf0/0x3b0 ? __pfx_bnxt_close_nic+0x10/0x10 ? ethnl_parse_bit+0x2c6/0x6d0 ? __pfx___nla_validate_parse+0x10/0x10 ? __pfx_ethnl_parse_bit+0x10/0x10 bnxt_set_features+0x2a8/0x3e0 __netdev_update_features+0x4dc/0x1370 ? ethnl_parse_bitset+0x4ff/0x750 ? __pfx_ethnl_parse_bitset+0x10/0x10 ? __pfx___netdev_update_features+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x70 ? __pm_runtime_resume+0x7d/0x110 ethnl_set_features+0x32d/0xa20 To fix this problem, it uses rhashtable_lookup_fast() instead of rhashtable_lookup() with rcu_read_lock(). Using xa without rcu_read_lock() here is safe. xa is freed by __xdp_mem_allocator_rcu_free() and this is called by call_rcu() of mem_xa_remove(). The mem_xa_remove() is called by page_pool_destroy() if a reference count reaches 0. The xa is already protected by the reference count mechanism well in the control plane. So removing rcu_read_lock() for page_pool_destroy() is safe.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT When loading a EXT program without specifying `attr->attach_prog_fd`, the `prog->aux->dst_prog` will be null. At this time, calling resolve_prog_type() anywhere will result in a null pointer dereference. Example stack trace: [ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 8.108262] Mem abort info: [ 8.108384] ESR = 0x0000000096000004 [ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits [ 8.108722] SET = 0, FnV = 0 [ 8.108827] EA = 0, S1PTW = 0 [ 8.108939] FSC = 0x04: level 0 translation fault [ 8.109102] Data abort info: [ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000 [ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000 [ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 8.112783] Modules linked in: [ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1 [ 8.113230] Hardware name: linux,dummy-virt (DT) [ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0 [ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8 [ 8.113798] sp : ffff80008283b9f0 [ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001 [ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000 [ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000 [ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff [ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4 [ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f [ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c [ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000 [ 8.114126] Call trace: [ 8.114159] may_access_direct_pkt_data+0x24/0xa0 [ 8.114202] bpf_check+0x3bc/0x28c0 [ 8.114214] bpf_prog_load+0x658/0xa58 [ 8.114227] __sys_bpf+0xc50/0x2250 [ 8.114240] __arm64_sys_bpf+0x28/0x40 [ 8.114254] invoke_syscall.constprop.0+0x54/0xf0 [ 8.114273] do_el0_svc+0x4c/0xd8 [ 8.114289] el0_svc+0x3c/0x140 [ 8.114305] el0t_64_sync_handler+0x134/0x150 [ 8.114331] el0t_64_sync+0x168/0x170 [ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403) [ 8.118672] ---[ end trace 0000000000000000 ]--- One way to fix it is by forcing `attach_prog_fd` non-empty when bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type` API broken which use verifier log to probe prog type and will log nothing if we reject invalid EXT prog before bpf_check(). Another way is by adding null check in resolve_prog_type(). The issue was introduced by commit 4a9c7bbe2ed4 ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows the logic below: prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type; It implies that when EXT program is not yet attached to `dst_prog`, the prog type should be EXT itself. This code worked fine in the past. So just keep using it. Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog` is not present in resolve_prog_type().

In the Linux kernel, the following vulnerability has been resolved: bpf: fix overflow check in adjust_jmp_off() adjust_jmp_off() incorrectly used the insn->imm field for all overflow check, which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case, not the general jump instruction case. Fix it by using insn->off for overflow check in the general case.

In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu().

net/unix/af_unix.c in the Linux kernel 2.6.31.4 and earlier allows local users to cause a denial of service (system hang) by creating an abstract-namespace AF_UNIX listening socket, performing a shutdown operation on this socket, and then performing a series of connect operations to this socket.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt".

In the Linux kernel, the following vulnerability has been resolved: ext4: fix infinite loop when replaying fast_commit When doing fast_commit replay an infinite loop may occur due to an uninitialized extent_status struct. ext4_ext_determine_insert_hole() does not detect the replay and calls ext4_es_find_extent_range(), which will return immediately without initializing the 'es' variable. Because 'es' contains garbage, an integer overflow may happen causing an infinite loop in this function, easily reproducible using fstest generic/039. This commit fixes this issue by unconditionally initializing the structure in function ext4_es_find_extent_range(). Thanks to Zhang Yi, for figuring out the real problem!

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix memory leak in query_regdb_file() In the function query_regdb_file() the alpha2 parameter is duplicated using kmemdup() and subsequently freed in regdb_fw_cb(). However, request_firmware_nowait() can fail without calling regdb_fw_cb() and thus leak memory.

In the Linux kernel, the following vulnerability has been resolved: bpf: add missing check_func_arg_reg_off() to prevent out-of-bounds memory accesses Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to a global function as an argument. The adverse effects of this is that BPF helpers can continue to make use of this modified CONST_PTR_TO_DYNPTR from within the context of the global function, which can unintentionally result in out-of-bounds memory accesses and therefore compromise overall system stability i.e. [ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140 [ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302 [ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533 [ 244.174318] Call Trace: [ 244.175787] <TASK> [ 244.177356] dump_stack_lvl+0x66/0xa0 [ 244.179531] print_report+0xce/0x670 [ 244.182314] ? __virt_addr_valid+0x200/0x3e0 [ 244.184908] kasan_report+0xd7/0x110 [ 244.187408] ? bpf_dynptr_data+0x137/0x140 [ 244.189714] ? bpf_dynptr_data+0x137/0x140 [ 244.192020] bpf_dynptr_data+0x137/0x140 [ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26 [ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23 [ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570 [ 244.204744] ? 0xffffffffc0009e58 [ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10 [ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b [ 244.215922] bpf_trampoline_6442502480+0x43/0xe3 [ 244.218691] __x64_sys_prlimit64+0x9/0xf0 [ 244.220912] do_syscall_64+0xc1/0x1d0 [ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 244.226458] RIP: 0033:0x7ffa3eb8f059 [ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48 [ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e [ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059 [ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0 [ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000 [ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80 [ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000 [ 244.268303] </TASK> Add a check_func_arg_reg_off() to the path in which the BPF verifier verifies the arguments of global function arguments, specifically those which take an argument of type ARG_PTR_TO_DYNPTR | MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any explicit and strict type matching on the supplied register type, so let's also enforce that a register either type PTR_TO_STACK or CONST_PTR_TO_DYNPTR is by the caller.

In the Linux kernel, the following vulnerability has been resolved: drm/client: fix null pointer dereference in drm_client_modeset_probe In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: rename cpu_number1 to dummy_cpu_number The per cpu variable cpu_number1 is passed to xlnx_event_handler as argument "dev_id", but it is not used in this function. So drop the initialization of this variable and rename it to dummy_cpu_number. This patch is to fix the following call trace when the kernel option CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53 Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT) Call trace: dump_backtrace+0xd0/0xe0 show_stack+0x18/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x10c/0x140 __might_sleep+0x4c/0xa0 __kmem_cache_alloc_node+0xf4/0x168 kmalloc_trace+0x28/0x38 __request_percpu_irq+0x74/0x138 xlnx_event_manager_probe+0xf8/0x298 platform_probe+0x68/0xd8

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged user can cause a null-pointer dereference, which may lead to denial of service.