In the getHost() function of UriTest.java, there is the possibility of incorrect web origin determination. This could lead to incorrect security decisions with no additional execution privileges needed. User interaction is not needed for exploitation.

The default permissions of /dev/kmem in Linux versions before 2.0.36 allows IP spoofing.

eliteCMS v1.0 is vulnerable to Insecure Permissions via manage_uploads.php.

The CLI 1.0.0 for Amazon AWS OpenSearch has weak permissions for the configuration file.

Laundry Booking Management System 1.0 (Latest) and previous versions are affected by a remote code execution (RCE) vulnerability in profile.php through the "image" parameter that can execute a webshell payload.

An issue was discovered in MSA FieldServer Gateway 5.0.0 through 6.5.2 (Fixed in 7.0.0). The FieldServer Gateway has an internally used shared administrative user account on all devices. The authentication for this user is implemented through an unsafe shared secret that is static in all affected firmware versions.

OpenVidReview 1.0 is vulnerable to Incorrect Access Control. The /upload route is accessible without authentication, allowing any user to upload files.

Trimble TM4Web 22.2.0 allows unauthenticated attackers to access /inc/tm_ajax.msw?func=UserfromUUID&uuid= to retrieve the last registration access code and use this access code to register a valid account. via a PUT /inc/tm_ajax.msw request. If the access code was used to create an Administrator account, attackers are also able to register new Administrator accounts with full privileges.

A vulnerability has been found in trampgeek jobe up to 1.6.4 and classified as problematic. This vulnerability affects the function runs_post of the file application/controllers/Restapi.php. The manipulation of the argument sourcefilename leads to an unknown weakness. Upgrading to version 1.6.5 is able to address this issue. The patch is identified as 694da5013dbecc8d30dd83e2a83e78faadf93771. It is recommended to upgrade the affected component. VDB-217174 is the identifier assigned to this vulnerability.

Permissions Bypass in Extension Management in Google ChromeOS 16181.27.0 on managed Chrome devices allows a local attacker to disable extensions and access Developer Mode, including loading additional extensions via exploiting vulnerabilities using the ExtHang3r and ExtPrint3r tools.

ismsEx service is a vendor service in unisoc equipment。ismsEx service is an extension of sms system service，but it does not check the permissions of the caller，resulting in permission leaks。Third-party apps can use this service to arbitrarily modify and set system properties。Product: AndroidVersions: Android SoCAndroid ID: A-207479207

TOTOLINK A3002R TOTOLINK-A3002R-He-V1.1.1-B20200824.0128 is vulnerable to Insecure Permissions via binary /bin/boa.

There is a Kernel crash vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may escalate permissions.

An access control issue in D-Link DVG-G5402SP GE_1.03 allows unauthenticated attackers to escalate privileges via arbitrarily editing VoIP SIB profiles.

Nagios XI before 5.8.5 has Incorrect Permission Assignment for migrate.php.

Nagios XI before 5.8.5 has Incorrect Permission Assignment for repairmysql.sh.

An issue in ttyd v.1.6.3 allows attacker to execute arbitrary code via default configuration permissions.

Potential security vulnerabilities have been identified in an OMEN Gaming Hub SDK package which may allow escalation of privilege and/or denial of service. HP is releasing software updates to mitigate the potential vulnerabilities.

pdns specific as packaged in Debian in version before 3.3.1-1 creates a too privileged MySQL user. It was discovered that the maintainer scripts of pdns-backend-mysql grant too wide database permissions for the pdns user. Other backends are not affected.

The Toshiba printers provide several ways to upload files using the web interface without authentication. An attacker can overwrite any insecure files. And the Toshiba printers are vulnerable to a Local Privilege Escalation vulnerability. An attacker can remotely compromise any Toshiba printer. The programs can be replaced by malicious programs by any local or remote attacker. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point. https://www.toshibatec.com/contacts/products/ As for the affected products/models/versions, see the reference URL.

Incorrect default permissions vulnerability in the API of Netop Vision Pro up to and including 9.7.1 allows a remote unauthenticated attacker to read and write files on the remote machine with system privileges resulting in a privilege escalation.

Weak File and Folder Permissions vulnerability in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

It was discovered, that debian-edu-config, a set of configuration files used for the Debian Edu blend, before 2.12.16 configured insecure permissions for the user web shares (~/public_html), which could result in privilege escalation.

An issue was discovered in GeoVision GV-Edge Recording Manager 2.2.3.0 for windows, which contains improper permissions within the default installation and allows attackers to execute arbitrary code and gain escalated privileges.

A 2-Step Verification problem in Axigen 10.3.3.52 allows an attacker to access a mailbox by bypassing 2-Step Verification when they try to add an account to any third-party webmail service (or add an account to Outlook or Gmail, etc.) with IMAP or POP3 without any verification code.

In PMRChangeSparseMemOSMem of physmem_osmem_linux.c, there is a possible arbitrary code execution due to a use after free. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction is not needed for exploitation.

GitLab EE 8.9 and later through 12.7.2 has Insecure Permission

The `username:password` part was not correctly stripped from URLs in CSP reports potentially leaking HTTP Basic Authentication credentials. This vulnerability affects Firefox < 141, Firefox ESR < 128.13, Firefox ESR < 140.1, Thunderbird < 141, Thunderbird < 128.13, and Thunderbird < 140.1.

TSplus Remote Work 16.0.0.0 has weak permissions for .exe, .js, and .html files under the %PROGRAMFILES(X86)%\TSplus-RemoteWork\Clients\www folder. This may enable privilege escalation if a different local user modifies a file. NOTE: CVE-2023-31067 and CVE-2023-31068 are only about the TSplus Remote Access product, not the TSplus Remote Work product.

In JetBrains TeamCity before 2025.07 privilege escalation was possible due to incorrect directory permissions

D-Link DSL-G2452DG HW:T1\\tFW:ME_2.00 was discovered to contain insecure permissions.

An issue was discovered in EyesOfNetwork (EON) through 5.3.11. Privilege escalation can be accomplished on the server because nmap can be run as root. The attacker achieves total control over the server.

administrator.cfc in Adobe ColdFusion 9.0, 9.0.1, 9.0.2, and 10 allows remote attackers to bypass authentication and possibly execute arbitrary code by logging in to the RDS component using the default empty password and leveraging this session to access the administrative web interface, as exploited in the wild in January 2013.

A flaw was found in Red Hat Single Sign-On for OpenShift container images, which are configured with an unsecured management interface enabled. This flaw allows an attacker to use this interface to deploy malicious code and access and modify potentially sensitive information in the app server configuration.

Concrete CMS before 8.5.13 and 9.x before 9.2.2 allows unauthorized access because directories can be created with insecure permissions. File creation functions (such as the Mkdir() function) gives universal access (0777) to created folders by default. Excessive permissions can be granted when creating a directory with permissions greater than 0755 or when the permissions argument is not specified.

A remote code execution vulnerability exists in the Windows agent component of SecureConnector due to improper access controls on a named pipe. The pipe is accessible to the Everyone group and does not restrict remote connections, allowing any network-based attacker to connect without authentication. By interacting with this pipe, an attacker can redirect the agent to communicate with a rogue server that can issue commands via the SecureConnector Agent.  This does not impact Linux or OSX Secure Connector.

The AOD module has a vulnerability in permission assignment. Successful exploitation of this vulnerability may cause permission escalation and unauthorized access to files.

An issue was discovered in Mattermost Server before 3.8.2, 3.7.5, and 3.6.7. After a restart of a server, an attacker might suddenly gain API Endpoint access.

Permission management vulnerability in the PMS module. Successful exploitation of this vulnerability may cause privilege escalation.

Insecure Permissions vulnerability in GL.iNet AX1800 v.3.215 and before allows a remote attacker to execute arbitrary code via the file sharing function.

Incorrect access control in the Forgot Your Password function of EMSigner v2.8.7 allows unauthenticated attackers to access accounts of all registered users, including those with administrator privileges via a crafted password reset token.

When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended.

Multiple Mitsubishi Electric Factory Automation engineering software products have a malicious code execution vulnerability. A malicious attacker could use this vulnerability to obtain information, modify information, and cause a denial-of-service condition.

In Gotenberg through 6.2.1, insecure permissions for tini (writable by user gotenberg) potentially allow an attacker to overwrite the file, which can lead to denial of service or code execution.

eQ-3 Homematic Central Control Unit (CCU)2 through 2.51.6 and CCU3 through 3.51.6 allow Remote Code Execution in the JSON API Method ReGa.runScript, by unauthenticated attackers with access to the web interface, due to the default auto-login feature being enabled during first-time setup (or factory reset).

OvalEdge 5.2.8.0 and earlier is affected by an Account Takeover vulnerability via a POST request to /profile/updateProfile via the userId and email parameters. Authentication is required.

Panasonic P110, Eluga Z1 Pro, Eluga X1, and Eluga X1 Pro devices through 2020-04-10 have Insecure Permissions. NOTE: the vendor states that all affected products are at "End-of-software-support."

MiR robot controllers (central computation unit) makes use of Ubuntu 16.04.2 an operating system, Thought for desktop uses, this operating system presents insecure defaults for robots. These insecurities include a way for users to escalate their access beyond what they were granted via file creation, access race conditions, insecure home directory configurations and defaults that facilitate Denial of Service (DoS) attacks.

A privilege escalation vulnerability is identified in Ivanti EPM (LANDesk Management Suite) that allows a user to execute commands with elevated privileges.

Gradle Enterprise before 2022.1 allows remote code execution if the installation process did not specify an initial configuration file. The configuration allows certain anonymous access to administration and an API.