An issue was discovered in Vaultwarden (formerly Bitwarden_RS) 1.30.3. A vulnerability has been identified in the authentication and authorization process of the endpoint responsible for altering the metadata of an emergency access. It permits an attacker with granted emergency access to escalate their privileges by changing the access level and modifying the wait time. Consequently, the attacker can gain full control over the vault (when only intended to have read access) while bypassing the necessary wait period.

An access control issue in the component formDMZ.cgi of D-Link 816A2_FWv1.10CNB05_R1B011D88210 allows unauthenticated attackers to set the DMZ service of the device via a crafted POST request.

eliteCMS v1.0 is vulnerable to Insecure Permissions via manage_uploads.php.

An issue in MaysWind ezBookkeeping 0.7.0 allows a remote attacker to escalate privileges via the token component.

Laundry Booking Management System 1.0 (Latest) and previous versions are affected by a remote code execution (RCE) vulnerability in profile.php through the "image" parameter that can execute a webshell payload.

Local file inclusion in Automatic Systems Maintenance SlimLane 29565_d74ecce0c1081d50546db573a499941b10799fb7 allows a remote attacker to escalate privileges via the PassageAutoServer.php page.

An issue was discovered in Mattermost Server before 3.8.2, 3.7.5, and 3.6.7. After a restart of a server, an attacker might suddenly gain API Endpoint access.

Permission management vulnerability in the PMS module. Successful exploitation of this vulnerability may cause privilege escalation.

A vulnerability has been found in trampgeek jobe up to 1.6.4 and classified as problematic. This vulnerability affects the function runs_post of the file application/controllers/Restapi.php. The manipulation of the argument sourcefilename leads to an unknown weakness. Upgrading to version 1.6.5 is able to address this issue. The patch is identified as 694da5013dbecc8d30dd83e2a83e78faadf93771. It is recommended to upgrade the affected component. VDB-217174 is the identifier assigned to this vulnerability.

An issue was discovered in MSA FieldServer Gateway 5.0.0 through 6.5.2 (Fixed in 7.0.0). The FieldServer Gateway has an internally used shared administrative user account on all devices. The authentication for this user is implemented through an unsafe shared secret that is static in all affected firmware versions.

Insecure Permissions vulnerability in GL.iNet AX1800 v.3.215 and before allows a remote attacker to execute arbitrary code via the file sharing function.

administrator.cfc in Adobe ColdFusion 9.0, 9.0.1, 9.0.2, and 10 allows remote attackers to bypass authentication and possibly execute arbitrary code by logging in to the RDS component using the default empty password and leveraging this session to access the administrative web interface, as exploited in the wild in January 2013.

In XeroSecurity Sn1per 9.0 (free version), insecure directory permissions (0777) are set during installation, allowing an unprivileged user to modify the main application and the application configuration file. This results in arbitrary code execution with root privileges.

The CLI 1.0.0 for Amazon AWS OpenSearch has weak permissions for the configuration file.

There is a Kernel crash vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may escalate permissions.

Nagios XI before 5.8.5 has Incorrect Permission Assignment for repairmysql.sh.

Incorrect default permissions vulnerability in the API of Netop Vision Pro up to and including 9.7.1 allows a remote unauthenticated attacker to read and write files on the remote machine with system privileges resulting in a privilege escalation.

Amazon AWS Amplify CLI before 12.10.1 incorrectly configures the role trust policy of IAM roles associated with Amplify projects. When the Authentication component is removed from an Amplify project, a Condition property is removed but "Effect":"Allow" remains present, and consequently sts:AssumeRoleWithWebIdentity would be available to threat actors with no conditions. Thus, if Amplify CLI had been used to remove the Authentication component from a project built between August 2019 and January 2024, an "assume role" may have occurred, and may have been leveraged to obtain unauthorized access to an organization's AWS resources. NOTE: the problem could only occur if an authorized AWS user removed an Authentication component. (The vulnerability did not give a threat actor the ability to remove an Authentication component.) However, in realistic situations, an authorized AWS user may have removed an Authentication component, e.g., if the objective were to stop using built-in Cognito resources, or move to a completely different identity provider.

The Toshiba printers provide several ways to upload files using the web interface without authentication. An attacker can overwrite any insecure files. And the Toshiba printers are vulnerable to a Local Privilege Escalation vulnerability. An attacker can remotely compromise any Toshiba printer. The programs can be replaced by malicious programs by any local or remote attacker. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point. https://www.toshibatec.com/contacts/products/ As for the affected products/models/versions, see the reference URL.

The nfs-utils package in SUSE Linux Enterprise Server 12 before and including version 1.3.0-34.18.1 and in SUSE Linux Enterprise Server 15 before and including version 2.1.1-6.10.2 the directory /var/lib/nfs is owned by statd:nogroup. This directory contains files owned and managed by root. If statd is compromised, it can therefore trick processes running with root privileges into creating/overwriting files anywhere on the system.

The default permissions of /dev/kmem in Linux versions before 2.0.36 allows IP spoofing.

OpenVidReview 1.0 is vulnerable to Incorrect Access Control. The /upload route is accessible without authentication, allowing any user to upload files.

Incorrect access control in the Forgot Your Password function of EMSigner v2.8.7 allows unauthenticated attackers to access accounts of all registered users, including those with administrator privileges via a crafted password reset token.

The administrative UI component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server for AWS Marketplace, and TIBCO JasperReports Server for ActiveMatrix BPM contains a vulnerability that theoretically allows an unauthenticated attacker to obtain the permissions of a JasperReports Server "superuser" for the affected systems. The attacker can theoretically exploit the vulnerability consistently, remotely, and without authenticating. Affected releases are TIBCO Software Inc.'s TIBCO JasperReports Server: versions 7.1.1 and below, TIBCO JasperReports Server for AWS Marketplace: versions 7.1.1 and below, and TIBCO JasperReports Server for ActiveMatrix BPM: versions 7.1.1 and below.

GitLab EE 8.9 and later through 12.7.2 has Insecure Permission

Couchbase Server 4.0.0, 4.1.0, 4.1.1, 4.5.0, 4.5.1, 4.6.0 through 4.6.5, 5.0.0, 5.1.1, 5.5.0 and 5.5.1 have Insecure Permissions for the projector and indexer REST endpoints (they allow unauthenticated access).The /settings REST endpoint exposed by the projector process is an endpoint that administrators can use for various tasks such as updating configuration and collecting performance profiles. The endpoint was unauthenticated and has been updated to only allow authenticated users to access these administrative APIs.

An issue was discovered on Samsung mobile devices with N(7.1), O(8.x), and P(9.0) (released in China) software. The Firewall application mishandles the PermissionWhiteLists protection mechanism. The Samsung ID is SVE-2019-14299 (November 2019).

An issue was discovered in SeTracker2 for TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. It has unnecessary permissions such as READ_EXTERNAL_STORAGE, WRITE_EXTERNAL_STORAGE, and READ_CONTACTS.

The forDNN.UsersExportImport module before 1.2.0 for DNN (formerly DotNetNuke) allows an unprivileged user to import (create) new users with Administrator privileges, as demonstrated by Roles="Administrators" in XML or CSV data.

The netaddr gem before 2.0.4 for Ruby has misconfigured file permissions, such that a gem install may result in 0777 permissions in the target filesystem.

Kramer VIAware 2.5.0719.1034 has Incorrect Access Control.

Concrete CMS before 8.5.13 and 9.x before 9.2.2 allows unauthorized access because directories can be created with insecure permissions. File creation functions (such as the Mkdir() function) gives universal access (0777) to created folders by default. Excessive permissions can be granted when creating a directory with permissions greater than 0755 or when the permissions argument is not specified.

Deno is a runtime for JavaScript and TypeScript. In deno 1.34.0 and deno_runtime 0.114.0, outbound HTTP requests made using the built-in `node:http` or `node:https` modules are incorrectly not checked against the network permission allow list (`--allow-net`). Dependencies relying on these built-in modules are subject to the vulnerability too. Users of Deno versions prior to 1.34.0 are unaffected. Deno Deploy users are unaffected. This problem has been patched in Deno v1.34.1 and deno_runtime 0.114.1 and all users are recommended to update to this version. No workaround is available for this issue.

An issue was discovered in TSplus Remote Access through 16.0.2.14. There are Full Control permissions for Everyone on some directories under %PROGRAMFILES(X86)%\TSplus\UserDesktop\themes.

The `username:password` part was not correctly stripped from URLs in CSP reports potentially leaking HTTP Basic Authentication credentials. This vulnerability affects Firefox < 141, Firefox ESR < 128.13, Firefox ESR < 140.1, Thunderbird < 141, Thunderbird < 128.13, and Thunderbird < 140.1.

An issue was discovered in the Shannon RCS component in Samsung Exynos Modem 5123 and 5300. An incorrect default permission can cause unintended querying of RCS capability via a crafted application.

SolarView Compact <= 6.0 is vulnerable to Insecure Permissions. Any file on the server can be read or modified because texteditor.php is not restricted.

In the getHost() function of UriTest.java, there is the possibility of incorrect web origin determination. This could lead to incorrect security decisions with no additional execution privileges needed. User interaction is not needed for exploitation.

COMFAST CF-WR630AX v2.7.0.2 was discovered to contain a hardcoded password vulnerability in /etc/shadow, which allows attackers to log in as root.

SoLive 1.6.14 thru 1.6.20 for Android exists exposed component, the component provides the method to modify the SharedPreference file. The attacker can use the method to modify the data in any SharedPreference file, these data will be loaded into the memory when the application is opened. Depending on how the data is used, this can result in various attack consequences, such as ad display exceptions.

In Public Knowledge Project (PKP) OJS, OMP, and OPS before 3.3.0.21 and 3.4.x before 3.4.0.8, an XXE attack by the Journal Editor Role can create a new role as super admin in the journal context, and insert a backdoor plugin, by uploading a crafted XML document as a User XML Plugin.

Trimble TM4Web 22.2.0 allows unauthenticated attackers to access /inc/tm_ajax.msw?func=UserfromUUID&uuid= to retrieve the last registration access code and use this access code to register a valid account. via a PUT /inc/tm_ajax.msw request. If the access code was used to create an Administrator account, attackers are also able to register new Administrator accounts with full privileges.

Diasoft File Replication Pro 7.5.0 allows attackers to escalate privileges by replacing a legitimate file with a Trojan horse that will be executed as LocalSystem. This occurs because %ProgramFiles%\FileReplicationPro allows Everyone:(F) access.

Permissions Bypass in Extension Management in Google ChromeOS 16181.27.0 on managed Chrome devices allows a local attacker to disable extensions and access Developer Mode, including loading additional extensions via exploiting vulnerabilities using the ExtHang3r and ExtPrint3r tools.

In JetBrains TeamCity before 2025.07 privilege escalation was possible due to incorrect directory permissions

An issue was discovered in GeoVision GV-Edge Recording Manager 2.2.3.0 for windows, which contains improper permissions within the default installation and allows attackers to execute arbitrary code and gain escalated privileges.

A 2-Step Verification problem in Axigen 10.3.3.52 allows an attacker to access a mailbox by bypassing 2-Step Verification when they try to add an account to any third-party webmail service (or add an account to Outlook or Gmail, etc.) with IMAP or POP3 without any verification code.

In PMRChangeSparseMemOSMem of physmem_osmem_linux.c, there is a possible arbitrary code execution due to a use after free. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction is not needed for exploitation.

file_copy_fallback in gio/gfile.c in GNOME GLib 2.15.0 through 2.61.1 does not properly restrict file permissions while a copy operation is in progress. Instead, default permissions are used.

D-Link DSL-G2452DG HW:T1\\tFW:ME_2.00 was discovered to contain insecure permissions.