There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.
PyXML: Hash table collisions CPU usage Denial of Service
A Denial-of-Service vulnerability exists in BECKHOFF Ethernet TCP/IP Bus Coupler BK9000. After an attack has occurred, the device's functionality can be restored by rebooting.
On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.
Pillow before 9.3.0 allows denial of service via SAMPLESPERPIXEL.
Every uncached /avatar/:hash request spawns a goroutine that refreshes the Gravatar image. If the refresh sits in the 10-slot worker queue longer than three seconds, the handler times out and stops listening for the result, so that goroutine blocks forever trying to send on an unbuffered channel. Sustained traffic with random hashes keeps tripping this timeout, so goroutine count grows linearly, eventually exhausting memory and causing Grafana to crash on some systems.
A flaw in Node.js TLS error handling allows remote attackers to crash or exhaust resources of a TLS server when `pskCallback` or `ALPNCallback` are in use. Synchronous exceptions thrown during these callbacks bypass standard TLS error handling paths (tlsClientError and error), causing either immediate process termination or silent file descriptor leaks that eventually lead to denial of service. Because these callbacks process attacker-controlled input during the TLS handshake, a remote client can repeatedly trigger the issue. This vulnerability affects TLS servers using PSK or ALPN callbacks across Node.js versions where these callbacks throw without being safely wrapped.
Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB.
A vulnerability in Juniper Networks Junos OS ACX500 Series, ACX4000 Series, may allow an attacker to cause a Denial of Service (DoS) by sending a high rate of specific packets to the device, resulting in a Forwarding Engine Board (FFEB) crash. Continued receipt of these packets will sustain the Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on ACX500 Series, ACX4000 Series: 17.4 versions prior to 17.4R3-S2.
Control Channel in OpenVPN 2.4.7 and earlier allows remote attackers to cause a denial of service via crafted reset packet.
Under certain circumstances, invalid authentication credentials could be sent to the login endpoint of Johnson Controls Metasys NAE55, SNE, and SNC engines prior to versions 11.0.6 and 12.0.4 and Facility Explorer F4-SNC engines prior to versions 11.0.6 and 12.0.4 to cause denial-of-service.
An issue was discovered in H96 Smart TV Box H96 Pro Plus allows attackers to corrupt files via calls to the saveDeepColorAttr service.unk
A vulnerability was determined in birkir prime up to 0.4.0.beta.0. This affects an unknown function of the file /graphql of the component GraphQL Alias Handler. This manipulation causes resource consumption. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.
LINE client for iOS before 12.17.0 might be crashed by sharing an invalid shared key of e2ee in group chat.
Discourse is an open source platform for community discussion. A malicious request can cause production log files to quickly fill up and thus result in the server running out of disk space. This problem has been patched in the 3.1.1 stable and 3.2.0.beta2 versions of Discourse. It is possible to temporarily work around this problem by reducing the `client_max_body_size nginx directive`. `client_max_body_size` will limit the size of uploads that can be uploaded directly to the server.
Large handshake records may cause panics in crypto/tls. Both clients and servers may send large TLS handshake records which cause servers and clients, respectively, to panic when attempting to construct responses. This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable session resumption (by setting Config.ClientSessionCache to a non-nil value), and TLS 1.3 servers which request client certificates (by setting Config.ClientAuth >= RequestClientCert).
Mitsubishi MELSEC iQ-R Series PLCs with firmware 33 allow attackers to halt the industrial process by sending an unauthenticated crafted packet over the network, because this denial of service attack consumes excessive CPU time. After halting, physical access to the PLC is required in order to restore production.
Denial-of-service in the DOM: Service Workers component. This vulnerability affects Firefox < 147 and Thunderbird < 147.
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. After running a Burp Suite active scan, the device loses ICMP connectivity, causing the web application to become inaccessible.
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. Fuzzing performed using Defensics causes the device to become unresponsive, requiring a reboot.
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP Step Limit Storm tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
CVE-2026-0517 is a denial-of-service vulnerability in versions of Secure Access Server prior to 14.20. An attacker can send a specially crafted packet to a server and cause the server to crash
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. This vulnerability is triggered during fuzzing of multiple CIP classes, which causes the CIP port to become unresponsive.
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive limited storm tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP Step Limits Storms tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive grammar tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
A vulnerability has been identified in SIMATIC S7-300 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions), SIMATIC TDC CPU555 (All versions), SINUMERIK 840D sl (All versions). Sending multiple specially crafted packets to the affected devices could cause a Denial-of-Service on port 102. A cold restart is required to recover the service.
On Juniper Networks SRX Series configured with application identification inspection enabled, receipt of specific HTTP traffic can cause high CPU load utilization, which could lead to traffic interruption. Application identification is enabled by default and is automatically turned on when Intrusion Detection and Prevention (IDP), AppFW, AppQoS, or AppTrack is configured. Thus, this issue might occur when IDP, AppFW, AppQoS, or AppTrack is configured. This issue affects Juniper Networks Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D221, 15.1X49-D230; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2.
Mitsubishi MELSEC iQ-R Series PLCs with firmware 49 allow an unauthenticated attacker to halt the industrial process by sending a crafted packet over the network. This denial of service attack exposes Improper Input Validation. After halting, physical access to the PLC is required in order to restore production, and the device state is lost. This is related to R04CPU, RJ71GF11-T2, R04CPU, and RJ71GF11-T2.
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles Comprehensive step limit storm tests, the device reboots
A security issue exists within ArmorStart® LT that can result in a denial-of-service condition. During execution of the Achilles EtherNet/IP and CIP grammar tests, the device reboots unexpectedly, causing the Link State Monitor to go down for several seconds.
Apache ATS 6.0.0 to 6.2.3, 7.0.0 to 7.1.9, and 8.0.0 to 8.0.6 is vulnerable to a HTTP/2 slow read attack.
The etcd package distributed with the Red Hat OpenStack platform has an incomplete fix for CVE-2022-41723. This issue occurs because the etcd package in the Red Hat OpenStack platform is using http://golang.org/x/net/http2 instead of the one provided by Red Hat Enterprise Linux versions, meaning it should be updated at compile time instead.
A vulnerability was found in yarnpkg Yarn up to 1.22.22. It has been classified as problematic. Affected is the function explodeHostedGitFragment of the file src/resolvers/exotics/hosted-git-resolver.js. The manipulation leads to inefficient regular expression complexity. It is possible to launch the attack remotely. The patch is identified as 97731871e674bf93bcbf29e9d3258da8685f3076. It is recommended to apply a patch to fix this issue.
Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer that assists in deploying microservices. There is a potential vulnerability in Traefik managing HTTP/2 connections. A closing HTTP/2 server connection could hang forever because of a subsequent fatal error. This failure mode could be exploited to cause a denial of service. There has been a patch released in versions 2.8.8 and 2.9.0-rc5. There are currently no known workarounds.
In ZeroMQ before version 4.3.3, there is a denial-of-service vulnerability. Users with TCP transport public endpoints, even with CURVE/ZAP enabled, are impacted. If a raw TCP socket is opened and connected to an endpoint that is fully configured with CURVE/ZAP, legitimate clients will not be able to exchange any message. Handshakes complete successfully, and messages are delivered to the library, but the server application never receives them. This is patched in version 4.3.3.
Affected versions of Atlassian Fisheye/Crucible allow remote attackers to achieve Regex Denial of Service via user-supplied regex in EyeQL. The affected versions are before version 4.8.4.
JerryScript 2.2.0 allows attackers to cause a denial of service (stack consumption) via a proxy operation.
conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet.
A vulnerability exists in the ClearPass Policy Manager Guest User Interface that can allow an unauthenticated attacker to send specific operations which result in a Denial-of-Service condition. A successful exploitation of this vulnerability results in the unavailability of the guest interface in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address this security vulnerability.
Due to a memory leak, a denial-of-service vulnerability exists in the Rockwell Automation affected products. A malicious actor could exploit this vulnerability by performing multiple actions on certain web pages of the product causing the affected products to become fully unavailable and require a power cycle to recover.
A vulnerability was found in RESTEasy, where RootNode incorrectly caches routes. This issue results in hash flooding, leading to slower requests with higher CPU time spent searching and adding the entry. This flaw allows an attacker to cause a denial of service.
An issue has been discovered in GitLab CE/EE affecting all versions starting from 14.3 before 15.6.7, all versions starting from 15.7 before 15.7.6, all versions starting from 15.8 before 15.8.1. An attacker may upload a crafted CI job artifact zip file in a project that uses dynamic child pipelines and make a sidekiq job allocate a lot of memory. In GitLab instances where Sidekiq is memory-limited, this may cause Denial of Service.
Certain switch models from PLANET Technology have an SSH service that improperly handles insufficiently authenticated connection requests, allowing unauthorized remote attackers to exploit this weakness to occupy connection slots and prevent legitimate users from accessing the SSH service.
In Apache Thrift 0.9.3 to 0.13.0, malicious RPC clients could send short messages which would result in a large memory allocation, potentially leading to denial of service.
Softing Industrial Automation all versions prior to the latest build of version 4.47.0, The affected product is vulnerable to uncontrolled resource consumption, which may allow an attacker to cause a denial-of-service condition.
The MQTT protocol 3.1.1 requires a server to set a timeout value of 1.5 times the Keep-Alive value specified by a client, which allows remote attackers to cause a denial of service (loss of the ability to establish new connections), as demonstrated by SlowITe.
An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It allows resource consumption via long strings in the content stream.
A flaw was found in Aardvark-dns, which is vulnerable to a Denial of Service attack due to the serial processing of TCP DNS queries. An attacker can exploit this flaw by keeping a TCP connection open indefinitely, causing the server to become unresponsive and resulting in other DNS queries timing out. This issue prevents legitimate users from accessing DNS services, thereby disrupting normal operations and causing service downtime.
The swctrl service is used to detect and remotely manage PLANET Technology devices. Certain switch models have a Denial-of-Service vulnerability in the swctrl service, allowing unauthenticated remote attackers to send crafted packets that can crash the service.