Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue in Infotel Conseil GLPI v.10.X.X and after allows a remote attacker to execute arbitrary code via the insufficient validation of user-supplied input.

There is a command injection vulnerability in the underlying Central Communications service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A vulnerability, which was classified as critical, has been found in MailCleaner up to 2023.03.14. This issue affects some unknown processing of the component Email Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-262307.

There is a command injection vulnerability in the underlying deauthentication service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are command injection vulnerabilities in the underlying Soft AP Daemon service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's Access Point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

A remote code execution vulnerability exists in mintplex-labs/anything-llm due to improper handling of environment variables. Attackers can exploit this vulnerability by injecting arbitrary environment variables via the `POST /api/system/update-env` endpoint, which allows for the execution of arbitrary code on the host running anything-llm. The vulnerability is present in the latest version of anything-llm, with the latest commit identified as fde905aac1812b84066ff72e5f2f90b56d4c3a59. This issue has been fixed in version 1.0.0. Successful exploitation could lead to code execution on the host, enabling attackers to read and modify data accessible to the user running the service, potentially leading to a denial of service.

An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with an automatic subscription.

Awesome spawn contains OS command injection vulnerability, which allows execution of additional commands passed to Awesome spawn as arguments. If untrusted input was included in command arguments, attacker could use this flaw to execute arbitrary command.

A vulnerability classified as critical has been found in mikexstudios Xcomic up to 0.8.2. This affects an unknown part. The manipulation of the argument cmd leads to os command injection. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 0.8.3 is able to address this issue. The patch is named 6ed8e3cc336e29f09c7e791863d0559939da98bf. It is recommended to upgrade the affected component.

Xstream API versions up to 1.4.6 and version 1.4.10, if the security framework has not been initialized, may allow a remote attacker to run arbitrary shell commands by manipulating the processed input stream when unmarshaling XML or any supported format. e.g. JSON.

NextcloudPi is a ready to use image for Virtual Machines, Raspberry Pi, Odroid HC1, Rock64 and other boards. A command injection vulnerability in NextCloudPi allows command execution as the root user via the NextCloudPi web-panel. Due to a security misconfiguration this can be used by anyone with access to NextCloudPi web-panel, no authentication is required. It is recommended that the NextCloudPi is upgraded to 1.53.1.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the PING field of the resource ping.cmd. The NTP-2 device is also affected.

Iteris Vantage Velocity Field Unit 2.3.1, 2.4.2, and 3.0 devices allow the injection of OS commands into cgi-bin/timeconfig.py via shell metacharacters in the NTP Server field.

An OS command injection vulnerability exists in the NAT parameter of GoCast 1.1.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

Insufficient input validation in npm package `jison` <= 0.4.18 may lead to OS command injection attacks.

The pwrstudio web application of EV Charger (in the server in Circontrol Raption through 5.6.2) is vulnerable to OS command injection via three fields of the configuration menu for ntpserver0, ntpserver1, and pingip.

A command injection vulnerability in the `devcert` module may lead to remote code execution when users of the module pass untrusted input to the `certificateFor` function.

An issue in aliyundrive-webdav v.2.3.3 and before allows a remote attacker to execute arbitrary code via a crafted payload to the sid parameter in the action_query_qrcode component.

DrayTek Vigor2960 1.3.1_Beta, Vigor3900 1.4.4_Beta, and Vigor300B 1.3.3_Beta, 1.4.2.1_Beta, and 1.4.4_Beta devices allow remote code execution as root (without authentication) via shell metacharacters to the cgi-bin/mainfunction.cgi URI. This issue has been fixed in Vigor3900/2960/300B v1.5.1.

FitNesse all releases allows a remote authenticated attacker to execute arbitrary OS commands. Note: A contributor of FitNesse has claimed that this is not a vulnerability but a product specification and this is currently under further investigation.

A command injection vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2, with the improved password hashing method enabled, could allow an unauthenticated attacker to execute certain commands by providing a manipulated password.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the TRACE field of the resource ping.cmd. The NTP-2 device is also affected.

A vulnerability classified as critical has been found in Tenda AC18 15.03.05.05. Affected is the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-257778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command with the root privilege via the internet.

OS command injection vulnerability exists in ffBull ver.4.11, which may allow a remote unauthenticated attacker to execute an arbitrary OS command with the privilege of the running web server. Note that the developer was unreachable, therefore, users should consider stop using ffBull ver.4.11.

Ajaxeplorer before 5.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) archive_name parameter to the Power FS module (plugins/action.powerfs/class.PowerFSController.php), a (2) file name to the getTrustSizeOnFileSystem function in the File System (Standard) module (plugins/access.fs/class.fsAccessWrapper.php), or the (3) revision parameter to the Subversion Repository module (plugins/meta.svn/class.SvnManager.php).

TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the t3.cgi srmodel or srtime parameter.

Post Oak AWAM Bluetooth Field Device 7400v2.08.21.2018, 7800SD.2015.1.16, 2011.3, 7400v2.02.01.2019, and 7800SD.2012.12.5 is vulnerable to injections of operating system commands through timeconfig.py via shell metacharacters in the htmlNtpServer parameter.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257775. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

We have recently released new version of AirMax AirOS firmware v6.3.0 for TI, XW and XM boards that fixes vulnerabilities found on AirMax AirOS v6.2.0 and prior TI, XW and XM boards, according to the description below:There are certain end-points containing functionalities that are vulnerable to command injection. It is possible to craft an input string that passes the filter check but still contains commands, resulting in remote code execution.Mitigation:Update to the latest AirMax AirOS firmware version available at the AirMax download page.

Schmid ZI 620 V400 VPN 090 routers allow an attacker to execute OS commands as root via shell metacharacters to an entry on the SSH subcommand menu, as demonstrated by ping.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

A remote code execution issue was discovered in HashBrown CMS through 1.3.3. Server/Entity/Deployer/GitDeployer.js has a Service.AppService.exec call that mishandles the URL, repository, username, and password.

closure-compiler-stream through 0.1.15 allows execution of arbitrary commands. The argument "options" of the exports function in "index.js" can be controlled by users without any sanitization.

This issue was discovered when the ipTIME C200 IP Camera was synchronized with the ipTIME NAS. It is necessary to extract value for ipTIME IP camera because the ipTIME NAS send ans setCookie('[COOKIE]') . The value is transferred to the --header option in wget binary, and there is no validation check. This vulnerability allows remote attackers to execute remote command.

diskusage-ng through 0.2.4 is vulnerable to Command Injection.It allows execution of arbitrary commands via the path argument.

node-key-sender through 1.0.11 is vulnerable to Command Injection. It allows execution of arbitrary commands via the 'arrParams' argument in the 'execute()' function.

docker-compose-remote-api through 0.1.4 allows execution of arbitrary commands. Within 'index.js' of the package, the function 'exec(serviceName, cmd, fnStdout, fnStderr, fnExit)' uses the variable 'serviceName' which can be controlled by users without any sanitization.

node-mpv through 1.4.3 is vulnerable to Command Injection. It allows execution of arbitrary commands via the options argument.

This affects all versions of package freediskspace. The vulnerability arises out of improper neutralization of arguments in line 71 of freediskspace.js.

get-git-data through 1.3.1 is vulnerable to Command Injection. It is possible to inject arbitrary commands as part of the arguments provided to get-git-data.

languageOptions.php in Rasilient PixelStor 5000 K:4.0.1580-20150629 (KDI Version) allows unauthenticated attackers to remotely execute code via the lang parameter.

pixl-class prior to 1.0.3 allows execution of arbitrary commands. The members argument of the create function can be controlled by users without any sanitization.

A vulnerability exists that could allow the execution of operating system commands on systems running MiPlatform 2019.05.16 and earlier. An attacker could execute arbitrary remote command by sending parameters to WinExec function in ExtCommandApi.dll module of MiPlatform.

install-package through 0.4.0 is vulnerable to Command Injection. It allows execution of arbitrary commands via the options argument.

This affects the package connection-tester before 0.2.1. The injection point is located in line 15 in index.js. The following PoC demonstrates the vulnerability:

npm-programmatic through 0.0.12 is vulnerable to Command Injection.The packages and option properties are concatenated together without any validation and are used by the 'exec' function directly.

karma-mojo through 1.0.1 is vulnerable to Command Injection. It allows execution of arbitrary commands via the config argument.